N500 with PCI device driver problem sound

hi , i re instal a new windows in my N500, XP SP2, and i downloaded all the driver in lenovo site, extrat all the pacckage, but after all, i still have a problem with the sound, with only driver missing!! this mysterious PCI DEVICE....i try to found in all site about a solution, i updated my HDMI from microsft like they say and try so many other idea without solution....always when i install the file setup in DRIVERS\WIN\AUDIO\52av02ww\XP32    i found a strange message after a while showing "le pilote n'a pas été installé: le peripherqiue correspondant est introuvable" it means that the correspndant device is not found....
this a copy of the report from everest
Debug - Unknown
Motherboard   DMIMOBO: LENOVO KIWDX
Motherboard   DMISYS: LENOVO 42335LG
Motherboard   SROSA001.86C.0000.D.0810200818
Motherboard   Unknown
PCI/AGP   14E4-1713: Broadcom NetLink (TM) Fast Ethernet [NoDB]
PCI/AGP   197B-2381: JMB38X SD Host Controller [NoDB]
PCI/AGP   197B-2382: JMB38X SD/MMC Host Controller [NoDB]
PCI/AGP   197B-2383: JMB38X MS Host Controller [NoDB]
PCI/AGP   8086-2919: Intel(R) ICH9M LPC Interface Controller - 2919 [NoDB]
PCI/AGP   8086-2928: Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 1 - 2928 [NoDB] PCI/AGP   8086-292D: Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 2 - 292D [NoDB] PCI/AGP   8086-2930: Intel(R) ICH9 Family SMBus Controller - 2930 [NoDB]
PCI/AGP   8086-2934: Intel(R) ICH9 Family USB Universal Host Controller - 2934 [NoDB]
PCI/AGP   8086-2935: Intel(R) ICH9 Family USB Universal Host Controller - 2935 [NoDB]
PCI/AGP   8086-2936: Intel(R) ICH9 Family USB Universal Host Controller - 2936 [NoDB]
PCI/AGP   8086-2937: Intel(R) ICH9 Family USB Universal Host Controller - 2937 [NoDB]
PCI/AGP   8086-2938: Intel(R) ICH9 Family USB Universal Host Controller - 2938 [NoDB]
PCI/AGP   8086-2939: Intel(R) ICH9 Family USB Universal Host Controller - 2939 [NoDB]
PCI/AGP   8086-293A: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A [NoDB]
PCI/AGP   8086-293C: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C [NoDB]
PCI/AGP   8086-293E: PCI Device [NoDB]
PCI/AGP   8086-2940: Intel(R) ICH9 Family PCI Express Root Port 1 - 2940 [NoDB]
PCI/AGP   8086-2942: Intel(R) ICH9 Family PCI Express Root Port 2 - 2942 [NoDB]
PCI/AGP   8086-2944: Intel(R) ICH9 Family PCI Express Root Port 3 - 2944 [NoDB]
PCI/AGP   8086-2946: Intel(R) ICH9 Family PCI Express Root Port 4 - 2946 [NoDB]
PCI/AGP   8086-294A: Intel(R) ICH9 Family PCI Express Root Port 6 - 294A [NoDB]
PCI/AGP   8086-2A40: Mobile Intel(R) 4 Series Chipset Processor to DRAM Controller - 2A40 [NoDB] PCI/AGP   8086-2A42: Mobile Intel(R) 4 Series Express Chipset Family [NoDB]
PCI/AGP   8086-2A43: Mobile Intel(R) 4 Series Express Chipset Family [NoDB]
PCI/AGP   8086-4237: Intel(R) Wireless WiFi Link 5100 [NoDB]
please who's have idea about this? who can help me?

try to run executable files on right click by selecting "run as admin"
and try to run this first, then try this.
or try to run lenovo smart downloading.

Similar Messages

Terredo Tunneling adapter driver and Ralink PCI Adapter driver problem

Have HP A-I-O, running Windows 8 and getting errors ref. Terredo Tunneling Adapter driver and Ralink PCI Adapter driver problem. Occassionally lose internet or wireless mouse and kebouad. Troubleshooting reloaded drivers for both but did NOT resolve the problem.
Any ideas? Wouold Refresh work? If so, should I just load Windows 8.1?

Sysherman, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Problems with Ethernet controller and PCI device driver on Satellite L30-10X

Hellow!
Sorry for my bad English, I'm from Russia.
Just few days ago I bought Satellite L30-10X with W Vista on board. My opinion, that this OS does't very good on this computer, so I install W XP.
I have some problems with drivers. At first, I dont know what model I have:PSL30 or PSL33? I download all drivers for both models. But, after installation, computer doen't find drivers for Ethernet controller and PCI device...

Hi
Satellite L30-10X belongs to the PSL33E series. This number can be found on the label placed on the bottom of the unit!
You have to choose this number from the driver download form to get the compatible XP drivers.
I dont know why you are not able to install the LAN driver. Ive got the same notebook with Vista and Ive installed the XP and all drivers run fine.
I assume you have installed the drivers in wrong order. Please take the look in the Toshiba installation instruction txt file. In this order you have to install the driver! Its important.
I think you should install the XP again to ensure the clean registry and then download and install the compatible XP drivers like mentioned in the installation instruction file.
Good luck

Unable to Sync Centro with Vista 32; device driver problem

I currently sync my Palm Centro (Verizon) to my Desktop Computer running Windows XP and Palm Desktop 6.2.2 with no problem. I am trying to move everything to an HP Notebook running Vista Business 32 bit. I disabled Norton Internet Security and loaded Palm 6.2.2 on the notebook but was unable to sync. Error message on the Palm said “The connection between your handheld computer and the desktop could not be established. Please check your setup and try again”. On the notebook the Palm handheld device driver has a “?” besides it. I tried doing a clean uninstall and reloaded Palm Desktop 6.2.2, but it still gives me the same error message. I tried looking for an updated device driver, uninstalling and reinstalling the device driver didn’t help either. Palm Support was unable to fix the problem. I then tried restoring the notebook to the factory condition, and reinstalled Palm Desktop; same error message; Palm device driver still has a “?”. I called HP Tech support. They had me update the Bios and update Vista to Service Pack 2. Still has the same problem. This is driving me crazy! Any ideas???
Post relates to: Centro (Verizon)

The system doesn't allow me to browse to PalmUSBD.inf or any other specific file name. It only allows me to browse to the subfolder USB_Driver. When I tried to key in the file name C:\Program Files\Palm\USB_Driver\PalmUSBD.inf and click next I'm told "The location you specified does not exist or cannot be reached."
I tried uninstalling the driver, then reconnecting to another USB port; driver seemed to install successfully, but then still has "?" and doesn't work. I am not using a USB Hub.

Solaris 10 GA and 64 bit Pentium Processor. Device Driver Problem

We have a Dell Poweredge SC420 with 3.4 GHz Pentium 4 (EMT64)
it also has 300Gb SCSI disk and 2 Gb Ram.
By default this machine tried to boot with the 64 bit kernel then could not load the CADP driver (SCSI CARD). We forced the Kernel to 32 bit by changing the BOOT_FILE from /kernel/AMD64/unix to /kernel/unix.
The machine is now booted but we are having problems with our PCI device. The device is a DMA Bus master and works fine on another SC420 which has a 2.8GHz Non-64 bit processor running the same release of Solaris. The device driver fails in strategy when we try to bind the dma buffer,(ddi_dma_buf_bind_handle) returning DDI_DMA_TOOBIG when the cookie count is > 1.
The machine appears to function apart from our device although we have suffered some kernel panics. We cannot ascertain if other devices are performing DMA successfully but must assume that they are.
Anybody got any ideas, Has anyone else got this processor working?

My bad. The memory per guest domain is 1GB. Se the Section 1 (NEW) - Hardware http://wikis.sun.com/display/SolarisLogicalDomains/LDoms%20Community%20Cookbook
Ignore the http://www.sun.com/software/solaris/specs.jsp

Thunderbolt device driver problem

I have a W540 and running Windows 7 64 bits - and brought a WD My Passport Pro Thunderbolt HDD. I know it is for Macs - but, I was thinking of reformating the HDD into NTFS once I can get the HDD to mount into Windows. The Thunderbolt Devices display tells me -
Thunderbolt Port 1 *-> Western Digital, My Passport Pro.
Unfortunately, I have a problem with "Standard AHCI 1.0 Serial ATA Controller" driver - gave me Code 12.
Does anybody knows of a replacement device driver to get this HDD to work? Or recommend an equivalent portable HDD (of at least 4TB) that works with W540 Thunderbolt port.
Thanks... WTS

Update - I think a more fundamental issue is this ...
Does the W540 BIOS support Thunderbolt hard-disks? I ask this - because I observe this ... when a Thunderbolt hard-disk is plugged in AND I reboot the computer, it hangs at the BIOS initialisation stage. Only when I remove the Thunderbolt drive, then the machine can boot up.
Also I noticed there is NO option in the BIOS for Thunderbolt - only USB.
TS

A215-S4747 Unable to Locate and Install PCI Device Driver

This is a Toshiba Satellite A215-S4747 32-bit AMD processor running Windows Vista Home Premium.
I have repeatedly tried to locate the PCI driver by using the discs that accompanied the PC, locating the correct driver on Toshiba Support, and though the device manufacturer is "unknown". I have attempted to write and get a response from the chipset manufacturer - but they claim their is no way for them to know and to contact Toshiba.
So, how do you solve this problem? (PC troubleshooting responses):
PCI Device - failed
OHCI Compliant IEEE 1394 Host Controller - failed
Went to locate: C:\DRVSTEMP - does not exist.
My devices:
Satellite A215-S4747 32-bit AMD processor, Vista Home Premium
Satellite P72-A7200 Intel Core I7 4700MQ CPU @ 2.4GHz, Windows 8.1

Satellite A215-S4747 Specifications
Satellite A215-S4747 Support Page
Let's try this driver and see if resolves the problem. Download this file, double click to install, reboot after installation and test:
TI Card Reader Driver
If this doesn't work, click on 'Start' -> type in: system info -> click on 'System Information' -> in the left-hand pane click on 'Components' -> in the left-hand pane click on 'Problem Devices' -> in the right-hand pane, under the 'PNP Device ID' column, give us the 4 digit VEN number, and the 4 digit DEV number. Like in the below example: VEN_8086 and DEV_4232.
Let us know what happens or give us the above numbers.
Mike

Custom PCI Device Driver for Phar Lap

Hi all,
I have deployed Labview Real-Time to a compact-PCI card in a cPCI chassis (non-NI brand for several unavoidable reasons). I need to do high-speed communication with another card in the chassis at minimum rates of 20 MB/s read, 4MB/s write - but preferably much higher. After extensive testing, we believe that NI VISA is incapable of maintaining those speeds in our system, and it barely maintains half those (side note: the hardware is more than capable as we have deployed embedded software that easily achieved the desired data rates).
Another engineer is responsible for finding ways to optimize VISA. The purpose of this post is to explore the option of writing a custom kernel driver for Phar Lap 2013 in C to handle communication with the other card. I have experience in writing windows kernel drivers, but the NI documentation for Phar Lap is severely lacking in this area.
So the overarching questions are:
1- Is it possible to do this?
2- If so, is it possible to use LabWindows/CVI to do this?
Any and all input is appreciated. Thanks

Hi:
Yes, it does.
You need this driver for the PCI Device.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79371-2&cc=us&dlc=en&lc=en&...

Network controller and pci device driver missing for Toshiba Sattelite c55t b5109

After resetting windows 8.1, I only my ethernet works and I cant turn my wifi. I looked in the device manger, and under "unknown devices" are listed Network Controller and PCI Device with yellow alerts near them. I know that these are related to the wireless card, but everytime I try to update them they say that there is no driver for them.
These are their hardware id's:
Network Controller:
PCI\VEN_168C&DEV_0036&SUBSYS_083211AD&REV_01
PCI\VEN_168C&DEV_0036&SUBSYS_083211AD
PCI\VEN_168C&DEV_0036&CC_028000
PCI\VEN_168C&DEV_0036&CC_0280
PCI Device:
PCI\VEN_10EC&DEV_5229&SUBSYS_F91B1179&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_F91B1179
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
PLEASE HELP!!!!

search your laptop for the Toshiba application installer, open it and use it to install your Wireles lan driver.
The application installer is easier than guessing which one you need from your support page.
OR
Your support page is here - http://support.toshiba.com/support/modelHome?freeText=1200008391
You can select the drivers tab then down the page on the left hand side select Windows 8.1 64 bit to narrow down the drivers for your operating system. Then also select Wifi and the available drivers will be displayed.
If you are getting a corrupted system after a reset your hard drive may be failing or your recovery partition may have been corrupted . Create your recovery media if you have not done so already.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

WinXP reboots caused by a device driver problem??

Hi All the experts there,
I recently bought and installed a MSI 865GM2-LS Motherboard. However, after I installed WinXP, as each time I get onto the web, system reboots and telling me it's caused by a device driver. I installed every device drivers provided in the installation disk. Is there sth wrong with the hardware of just software problem?
This is really wierd because I've tried WindowsME with exact same hardwares attached and device drivers installed, it works perfectly!
Please Help!
MSI 865gm2-ls
P4 2.6G 800 FSB
Kingmax 512MB Memory
Seagate 120G HD
Pioneer DVD-RW A106
WinXP Home/Professional

Sorry, I forgot to mention that there wasn't any problems AT ALL when I use the exact cable modem with another computer that has WinXP installed!! I don't think it's the problem of the modem driver.
Maybe BIOS configuration problems? Then, what is it? I have gone through numerous times and I can't think of anything I might be mistaken.

TD340 with PCIe device loud fans

I have a TD340 that is really quiet under normal use and even some heavy processing. It is in a cooled environment. The issue I have is when I add either a sound card or video card (self cooling) the fan speeds go way up even before it start loading the OS. There seems to be something within the BIOS that tells the fans to speed up when there is a card installed, even though the card will not create very much heat at all. I have monitored the temps and they are lower with the card installed due to the high fan speeds. Any advice on how to get the fans down to a normal speed with a PCIe device in it?

Hello,
If the device is not supported / validated, BIOS may not recognize it, therefore it will tell the system to ramp the fans as it's not sure what cooling is required for the device. It is a precaution so no major damage is done due to over-temp.
This could be the issue you're seeing.

HP Probook 470 G0 - Biometric device (driver) problem

Hello,
I have a problem with biometric device, I can't find biometric in device manager. Does anyone know how can i fix it? I installed driver (Validity Sensor) but nothing happens when i enter in device manager. Does anyone know how can i enable biometric? Thats the whole problem I think, there is no biometrics in device manager. Is that problem with BIOS, can i enable it there or what? I use Win 7, 64-bit.
Thanks in advance,
Aleksandar Sretenovic

Can anyone help me, please???

Powerbook G4 12" 867mhz with dvd/cd drive problems - please help!

Hello all,
Just realized this thread should have been in this section. I put it in the using your powerbook section. Sorry for the double post. I just wanted it to be in the right section.
I have just inherited a powerbook g4 from a family member who is upgrading to a new machine. It has dvd/cd drive problems. I'm totally new to OSX and a notebook machine and need some assistance. I've been briefly scanning the forums here and noticed problems with these drives on the model computer. Is there a way to fix this with an install of older software? Here is the problem, if I insert a cd into the super drive it mounts on the desktop, and itunes will play it but it skips and sounds very distorted. I haven't tried a dvd but was told it doesn't even see the dvds on the desktop. Here are the know specs on the machine:
867mhz
640 mb ram
mac os x 10.5.1
boot rom version 4.5.5f4
the burner info: matshita dvd r uj-015
firmware version: docb
Thanks in advance!

Good Morning Mac,
According to your posted specs for the 12" G4PB you have the bare minimum requirements for Leopard. Even Tiger (10.4.11) should have 1GB RAM for decent performance (see my signature specs).
An easily installed 1GB RAM stick can be obtained at either of these reliable vendors:
http://eshop.macsales.com/ or http://www.crucial.com/
However, we are getting ahead of ourselves. Try the following in this order:
Repair Disk Permissions with /Applications/Utilities/Disk Utility/Repair DP, then do the following:
Run Repair HD from original CD or DVD install disk ........
Insert disk and re-start holding down the 'C' key until you see the spinning gear.
At Installer level...... DO NOT CONTINUE
At top left, use 'Utilities' Menu for Tiger or later and go 'Disk Utility'
Select your HD volume with Operating system on...
Select First Aid tab then select Repair Hard Disk button
If "RED" errors are repaired, run again, until none are reported then +run again+ just to be sure you are OK
Do NOT continue with the Installer... QUIT the Installer and return to the Finder ......... Eject the Disc
RESTART ..... Repair Disk Permissions .... AGAIN!
Try the above stuff first .... if that doesn't help, we will get into the "RESETS" steps next!
DIXIE

Photoshop with occasional GPU driver problem

Dear all,
Sometimes when I start photoshop, I get a message saying: "Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
I have the latest graphics drivers installed, but this message does not always occur when I start Photoshop although the driver does not change. So, I guess there might be some other reason causing this error message.
I am running Photoshop on a Thinkpad with Windows XP Professional.
Regards,
WM

What is the level of OGL implemented by your card? Adobe has an OGL compatability app that ships with AE. Hopefully yours is 2.1 or later. If not, then get a new card. A new driver will not help. If you are really lucky, then there is a flash ROM update for the card to up-rev the OGL, but that is very rare.
As a side note: I am not sure how this myth gat started, but PS actually puts very little strain on GPU acceleration compared to visualization, CAD and compositing apps. It is a minor issue compared to other offerings in the CS4 family (PP and AE come to mind).
The Engineering team knows there are issues with their use of OGL. They are working hard to get a solution in the hands of folks quickly.
The first recommendation is to disable all "advanced OGL settings" and see how you do.
H

Missing pci device driver

how to get the pci device???

Hi:
Download and install the first driver on the list at the link below.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...

N500 with PCI device driver problem sound

Similar Messages

Maybe you are looking for