N560gtx & MSI ZH77A-G43 & win7 x64
I have a PC: new motherboard MSI ZH77A-G43, used video MSI N560gtx, windows7 x64. When I installed Nvidia 306.97 driver and then reboot, I got black screen. Then I boot safe mode, uninstall Nvidia driver, reboot. Windows 7 started, vga mode. Device manager don`t show
any unknown device.
Please help me to make frienship MSI ZH77A-G43 & MSI N560gtx.
Thank you!
Sad story. It was HDMI connected, HDMI TV was off. And video card showed screen #1 on HDMI. Video driver behavior is very strange .
Thank you
Similar Messages
-
ZH77A-G43 Will only boot with 2 sticks
Trying to build a linux backup server, but cannot get to even boot with 2 sticks.
System powers up, fans spin. After about 10 seconds power-cycles and then continues
to repeat in a loop.
Have read through various similar posts.
So far have tested all sticks test fine when tested individually with memtest86
Have removed, inspected CPU and mobo for bent pins; none visible to the naked eye.
Is there anything I am missing to try and resolve this issue?
------Build is below ---------
MSI ZH77A-G43 LGA 1155
CORSAIR CX600M 600W
ZALMAN CNPS9500A-LED 92mm
ASUS Black SATA DVD-ROM Drive Model ...
Seagate Barracuda STBD2000101 2TB 7200 RPM
Seagate Barracuda STBD2000101 2TB 7200 RPM
Seagate Barracuda ST2000DM001 2TB 7200 RPM
G.SKILL Ripjaws X Series 32GB (4 x 8GB)
Crucial M4 CT128M4SSD2 2.5" 128GB
Intel Core i5-3570K Ivy Bridge 3.4GHzOk I can get it to go as far as 2 sticks; not in the expected slots either. Board identifies these as slot 1 and 2.
In OC genie it shows two. The sticks are labeled CL 9 9 9 24.
The memory page shows the following timings:
Cycle 1.5ns
tcl 13.125ns
tRCD 13.125ns
tRP 13.125ns
tRAS 36ns
tRFC 260ns
tWR 15ns
tWTR 7.5ns
tRRD 6.0ns
tRTP 7.5ns
tFAW 30.0ns
tRC 49.125ns
What exactly am I looking to adjust here (or am I looking in the wrong place)? -
I recently installed the bios updates using the MSI Update and now the computer won't fully boot!!!! I tried clearing CMOS like 3 times and nothing! It makes it to the starting windows screen with the spinning dots but only the first red dot shows up and it freezes, even the repair windows freezes at the black screen.. The Bios live update also freezes at the black screen. PLEASE HELP!!!
Quote from: jellyman223 on 16-May-11, 11:37:22
The boot freezes exactly at 0:21
and what's the issue? its boot fine as i can see
Quote from: jellyman223 on 17-May-11, 02:50:11
# CPU brand, model and speed Intel Core i5-2500K Sandy Bridge 3.3GHz
# Motherboard model MSI P67A-G43 (B3) (NVIDIA VGA BIOS KK1) USING MSI Live Update for VGA
# Memory brand, type/speed, size, number of sticks Patriot Gamer 2 Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
# Video card brand, chipset type, memory size MSI N570GTX-M2D12D5/OC GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5
# Hard drive(s) brand, size, type, speed SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
# Operating system and version (including if 32 or 64bit!) Window 7 Professional x64
# Power Supply Unit brand and output in watts COOLER MASTER GX Series RS750-ACAAE3-US 750W http://www.newegg.com/Product/Product.aspx?Item=N82E16817171053
Quote
# Motherboard model MSI P67A-G43 (B3) (NVIDIA VGA BIOS KK1) USING MSI Live Update for VGA
this is KK1 is VBIOS for your MSI N570GTX-M2D12D5 card, has nothing to do with board.
what's the mainboard bios version? -
Msi 990fxa-gd65 setting up raid 1 with os win7 x64 on ssd
Ok, I just built my first computer and am trying to set up win7 x64 on my 120g SSD while running two 2 TB wd hard drives in raid 1. I have tried everything and am at wits end! please help
i set up raid in the bios, then set up a LD with the two 2 TB hard drives however when I go to install win7 it says its missing a driver and wont proceed.If the SSD is connected to a SATA-3 port you may need drivers to make Windows know about it.
Same for the RAID, but that one can be loaded after Windows is installed. -
MSI DKA790GX PLATINIUM msi core center bsod on startup win7 x64
i installed core center on win7 x64, i get bsod rushtop64.sys on startup.
Did you see this in the link? Also it's dual-core-center.
Quote
• If you are using an ATI graphic card, you must install ver. 8.41 driver and its additional applications to make Dual CoreCenter works normally. It is better to use recommended installation while installing an ATI VGA driver.
But that brings me to my next question, why would you install and use that app anyway?
Hardly anybody does. -
Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO
I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued -
MSI B85M-G43 can't install Windows 7. Hard disk not detected.
Hi,
I just built a new computer for the first time. I followed the instructions and did everything correctly. but am unable to install Windows 7 Ultimate 64bit. Hard disk isn't always detected during the installation.
But when it appeared in the "Where do you want to install Windows" list along with system, I tried to format the hard disk and got a message "Failed to format the select partition. [Error 0x80070057]."
Then I restarted the computer, the hard disk no longer displayed in the list, so I put motherboard driver disc and clicked on Load Driver and opened Storage\Intel\PCH_12.0\f6flpy-x64. It loaded, then I got a message saying "To continue installation, use the Load Driver option to install 32-bit and signed 64-bit drivers. Installing an unsigned 64-bit device driver is not supported and might result in an unusable Windows installation."
I restarted again and disabled Driver Signature Enforcement, but it didn't help. I still got the same message.
In the computer case I have these devices:
- MSI B85M-G43, Socket-1150
- Intel Core i5-4430 Processor
- Corsair Vengeance DDR3 1600MHz 8GB
- MSI GeForce GTX 650Ti BOOST 1GB
- Cooler Master GX 550W PSU
- WD Desktop Green 1TB
- SuperMulti 16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive
Everything is plugged in correctly. Hard disk connector plugged in SATA 1 and DVD -> SATA 2.
The installation is pretty slow, regardless if i install it via USB or x16 DVD. All except DVD and hard disk are disabled. It's also worth to mention that even DVD and USB aren't always detected in the click BIOS.
So I'm wondering if anyone here can help me? ThanksHi and
1: What BIOS version you have? .. Have you tryed to downgrade/upgrade it already?
2: Have you tryed it in those SATA 2 ports? ...is it same strory?
- On SATA there aint any master or Slave like on IDE so if you are under same controller it dosent mutter what port you use on what device.
Note: SATA 3 Ports are faster then SATA2 ports, but even SATA 1 can handel your DVD or HDD. So no lose if you need to use SATA 2 ports.
Hope this get you foward! Cheers Mummy -
New install ZH77A-G43 with cloned Server 2003 won't boot in Safe mode
Hello,
I just installed a ZH77A-G43 into an existing PC box, new Core i3, new SATA CD and 500G drive, existing tape backup connected to a SCSI card. I cloned the new harddrive into 2 partitions, the first one being a bootable Server 2003. I installed the harddrive on another computer, and the partitions appear to be cloned correctly. When I boot off the new drive in the new hardware computer it gets to the Server 2003 splash screen, and then reboots during processing of acpitabl.dat (this is in Safe mode). I've tried booting from a Server 2003 installation CD, and that also results in a reboot.
I tried removing the SCSI card, and that results in a reboot before the MSI splash screen comes up.
This is the first time I've done a hardware change like this. The MSI instructions were very simple to follow and I was exciding to see the Server 2003 splashscreen after about 30 minutes of hardware installation. But now I'm stuck and request your help.
Regards, PhilipHello xmad,
Thanks for the suggestions. The CD that wouldn't boot is Server 2003 64 bit--no service pacts. I just tried my VISTA CD and it came up and was ready to start the installation. The hardware is
Seagate 500G harddrive connected to SATA2
LG OEM DVDRW 24X internal connected to SATA1
2 sticks of DDR3 2GB 1333MHz
Quantum DLT-V4 tape backup drive connected to SCSI card
PSU is enclosed in a case labeled ANTEC DESIGN and I can't see any infor unless I take apart the enclosure.
I just removed the SCSI card, and the system reboots immediately after 1 second or so of the MSI splashscreen. With the SCSI card in, it reboots during the Server 2003 splashscreen (during processing of acpitabl.dat).
Should this system be compatible with Server 2003 64bit?
Should I next update the BIOS as you previously suggested?
Update: I currectly have BIOS E7758IMS V1.7 -
MSI P67A-G43 and Call of Duty 2
I recently buyed one of this mother boards and i cant play the COD 2 multiplayer mode, an error message occurs in codmp_s.exe... XP, Vista and 7 always the same problem...
Quote from: Bernhard on 24-April-11, 16:09:30
Please provide your full system configuration. >>Posting Guide<<
You can play COD2 in single player mode? If so, then I would think that you have a game set-up problem with the mutli player mode.
Just do a search on the net for that error message and you will see you are not alone. Go to the game manufacturers site and check for game updates. It could also be related to direct X installation.
Hi, i think could be a drivers problem, i just replaced my motherboard and processor only and i never had any problem before...
Cod 2 should run perfectly on Windows XP but i have the same crash problem...
Core i5 2500k @3600 mhz
MSI P67A-G43 (B3) Bios 1A (latest drivers)
Mushkin radioactive DDR3 12800 2x2gb 7-9-7-24 @1600 mhz
GeForce 460 GTX 1 GB
RAID 0 2x WD caviar blue 750 GB
Windows XP (x86) and 7 (x86 & x64) -
P45 Platinum IEEE1394 drivers for Win7 x64
I just reinstalled my PC with P45 Platinum mainboard and everything installs fine with the drivers from the MSI website, however there is no driver for IEEE1394 controller there.
I installed Win7 x64 now, before I installed WinXP and at the time of that installation it installed fine.
I am not using the IEEE1394 controller at the moment but there is a exclamation point in the device manager I want to get rid of.
Can anyone point me to the driver, thnx.In windows 7 there's no Firewire driver needed it should automatically install it as already integrated. Is it already installed and exclamation mark on it like it isn't working correctly or unknown device?
-
Wheres all the WIN7 X64 drivers
I have a K9N2 sli plat. This is a new build w/ win7 x64. I don't see where all the drivers are. I got a few from drivers on the mainboard page, but nothing useful. I cant run live update since I don't have net on it yet. That's why I'm looking for drivers.
CM HAF 932
MSI K9N2 sli plat
AMD Phenom 9600 BE
OCZ DDR2 1066 8GB
XFX GTS 250
Seagate 1TBx2
LG cd/dvd burner
LG blue ray
Corsair HX1000Don't use Live Update, it's best to download manually and then install whatever you need.
If you need to update BIOS: >> Use the MSI HQ Forum USB flasher <<
"w/ that b4."
Please use normal English, this is a "Global forum" and people use many languages that must use online translators and the chat room, net-speak stuff like that does not translate. -
MSI Z87-G43 USB 3.0 problem - not recognize
Hello. My USB 3.0 device (pendrive Platinet X-Depo 32GB USB 3.0) gets power when plugged into the USB port, but the OS(Windows 8 and 8.1) doesn't recognize it. In the device menager USB device mass storage had a error nr 10 The device cannot start. Worked perfectly in Windows 7 (i'am install to tested) or in the port USB 2.0 (in Windows 8 and 8.1). I have actually BIOS 1.73 (before instaled bios 1.5, 1.6) and drivers for motherboard. On the standard BIOS (ver. 1.0) my pendrive don't recognized any port - 2.0 and 3.0.
I'm trying this method, but not worked for me:
//plugable.com/2012/12/01/windows-8-and-intel-usb-3-0-host-controllers
My configuration:
MSI Z87-G43 S/N: 601-7816-010B1305018448 - actually BIOS v1.73
i7 4770K
Gigabyte GTX 770 2GB
Kingstone SSD 128GB
Patriot 2x 4GB RAM
Chieftec 750W
Pendrive Platinet 32GB USB 3.0
Thank you for help me.
PS. Sorry for my poor English.Attached is a beta bios sent from MSI.
>>Use the MSI HQ Forum USB flasher<<
They say they cannot duplicate the problem though. Here is the test they did, let me know what they can do to trigger this.
1. Install System driver and reset
2. Connect USB HDD to USB 3.0 port. The device can be recognized.
3. Reboot the system
4. Check Computer and still can find the USB HDD
5. Power off the system
6. Power on and check Computer.
Test System:
Z77A-GD65
BIOS: E7751IMS.A50
WIN7 64 bit
USB 3.0 driver: 1.0.4.225
Seagate FreeAgent Goflex STAA1500301 1.5TB -
PrE-10 Will not start in Win7(x64)
I sincerely hope this is not redundant, but I have spent days on this forum looking for answers, but with no luck. I have seen many similar questions, but none of the 'fixes' proposed are relevant, or do not work for me.
History:
I have been running PrE-10 since its release, on Win-7(32-bit). I recently had a system crash after installing Windows-8 Beta and had to wipe my hard drive and start from scratch. This time I loaded Win-7 (x64). All my original apps I had stored on an external drive. Some re-installed, some not. I had to re-download PSE-10, and PrE-10 as 64-bit apps.
PSE-10 and the associated Organizer, work fine as before. PrE-10 however does not start. I get the splash screen, with the options of NEW, OPEN and Organizer. Of these, only Organizer opens. The other two options either bring up a Windows Error box 'Pre-10 has failed to start', or it just sits and does nothing.
It is not a system limitation as I have far more than the requirements needed to run it and as I said, it worked fine in the 32-bit version, and nothing else has changed (that I have input), so I am baffled.
As I said, I have done many of the proposed fixes I have seen on the forum, if they are pertinent to my system, and even some that were not. I have now completed the reinstallation of most of my applications, and so far only PrE is causing a problem, but it is very important to me as I am working on a project that requires it.
I have done a Belarc report, but I do not see a link to upload it. I see links for images, videos, tables and weblinks, but nothing for files (pdf). I will attempt to load it as an image and see if this works. I do not want to post it as text or HTML as it is 7 pages long! (Nope, it does not insert). Perhaps someone can tell me how to upload the file.
Here is a system summary:
OS Name
Microsoft Windows 7 Ultimate
Version
6.1.7601- Service Pack 1 Build 7601
Other OS Description
64-bit
OS Manufacturer
Microsoft Corporation
System Name
DOUG-IQ775
System Manufacturer
HPQOEM
System Model
SLIC-CPC (TouchSMart IQ-775)
System Type
x64-based PC
Processor
AMD Turion(tm) 64 X2 Mobile Technology TL-58, 1900 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date
American Megatrends Inc. 5.15, 11/26/2007
SMBIOS Version
2.4
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
DOUG-IQ775\DOUG
Time Zone
US Mountain Standard Time (AZ)
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
4.00 GB
Current Available Physical Memory 1.68 GB
Total Virtual Memory
8.00 GB
Available Virtual Memory
5.32 GB
Page File Space
4.00 GB
Page File
C:\pagefile.sys
STORAGE
USB Flash Memory, s/n 001D0F1FCF2DC8C08406020B, rev 1.00
Generic Flash Disk -- drive 8, 8GB s/n 03483DBB, rev 8.07
WDC WD16 00BEVS-60RST0 -- drive 7, 160GB s/n WDC WD1600 WD-WXC108351497
Generic CF Reader -- drive 5, s/n 058F12M111B, rev 1.01
Generic SM/SD/MS Reader -- drive 6, s/n 058F12M111B, rev 1.00
Century EX35SW4_SB4-A USB Device -- drive 1, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-B USB Device -- drive 2, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-C USB Device -- drive 3, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-D USB Device -- drive 4, s/n 011E011D3B, rev 0100
HARD DRIVES
c:/D:(NTFS on drive 0) *
500.11 GB
k: (NTFS on drive 7)
160.03 GB
w: (NTFS on drive 1)
250.06 GB
x: (NTFS on drive 2)
250.06 GB
y: (NTFS on drive 3)
250.06 GB
z: (NTFS on drive 4)
250.06 GB
WDC WD16 00BEVS-60RST0 USB Device [Hard drive K:] (160.04 GB) -- drive 7, SMART Status: Healthy
WDC WD50 00AAKS-65TMA SCSI Disk Device (500.10 GB) -- drive 0, s/n WD-WCAPW3069745, SMART Status: Healthy
Drives new – drive encryption
Memory Modules c,d
1660.37 Gigabytes Usable Hard Drive Capacity
914.49 Gigabytes Hard Drive Free Space
CD/DVD
TSSTcorp DVDR/RW TS-T632L ATA Device [Optical drive]
Software Versions & Usage
i Adobe Download Assistant
i Adobe Help
i Adobe Photoshop Elements Editor Version 10.0
ı i Adobe Photoshop Elements Version 10.0
ı i Adobe Premiere Elements Version 10, 0, 0, 0
i Adobe Systems Incorporated - Elements Organizer Version 10.0
ı i Adobe Systems Incorporated - ElementsAutoAnalyzer Version 10, 0, 0, 0
Adobe Reader and Acrobat Manager Version 1.5.7.0
i Adobe Reader Version 10.1.3.23
i Adobe Systems, Inc. - Shockwave Flash Version 11,3,300,270
ı i Adobe Updater Startup Utility Version 2.2.0.2 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)
ı i Adobe® Flash® Player Update Service Version 11,3,300,270
i Amazon MP3 Downloader Version 1.0.0.0
i Any Audio Converter Application Version 3, 3, 8, 1
i Any DVD Converter Application Version 4, 0, 1, 1
ı i Apple Inc. - QuickTime QuickTime 7.7.2 (1680.56)
ı i Apple Push
i Apple Software Update Version 2.1.3
ı i Belarc, Inc. - Advisor Version 8.2g
i Canon IJ Driver Uninstaller Version 1.2
i Canon IJ Utility Uninstaller Version 1, 3, 0, 0
ı i CANON INC. - CNSLMAIN.EXE Version 1, 4, 3, 0
i CANON INC. - MP Navigator EX Version 1, 0, 7, 0
i CyberLink - CLDownloader Version 2.3.0.2715
i CyberLink - DZM Version 2.05.3206
ı i CyberLink Corp. - PowerDirector Version 9.0.0.2930
ı i Google Chrome Version 21.0.1180.75
ı i Google Update Version 1.3.21.103
ı i GSpot Codec Information Appliance Version 2, 7, 0, 1
ı i Igor Pavlov - 7-Zip Version 9.20
ı i INR Desk Version 2.0.0.0
ı i Microsoft Corporation - Internet Explorer Version 9.00.8112.16421
ı i Microsoft Corporation - Windows Installer - Unicode Version 5.0.7600.16385
Microsoft Corporation - Windows® Search Version 7.00.7600.16385
ı i Microsoft Malware Protection Version 4.0.1526.0
i Microsoft Network Inspection System Version 4.0.1526.0
ı i Microsoft Security Client Version 4.0.1526.0
i Microsoft ® Windows Script Host Version 5.8.7600.16385
ı i Microsoft® .NET Framework Version 2.0.50727.4927
i Microsoft® .NET Framework Version 3.0.6920.5011
i Microsoft® .NET Framework Version 4.0.31106.0
ı i Microsoft® CoReXT Version 7.250.4232.0
ı i Microsoft® Windows® Operating System Version 12.0.7600.16385
i OpenOffice.org 3.4 Version 3.04.9590
i OpenOffice.org Base Version 3.04.9590
i OpenOffice.org Calc Version 3.04.9590
i OpenOffice.org Draw Version 3.04.9590
ı i OpenOffice.org Impress Version 3.04.9590
i OpenOffice.org Math Version 3.04.9590
i OpenOffice.org Writer Version 3.04.9590
i OpenOffice.org Writer(Web) Version 3.04.9590
ı i Orbitdownloader.com - Orbit Downloader Version 4, 1, 1, 1
i PlotSoft L.L.C. - PDFill PDF Editor with FREE PDF Writer and PDF Tools Version 9.0.0.9
i PlotSoft LLC - PDFill FREE PDF and Image Writer Version 9.0.0.9
ı i Realtek - ReStart Application Version 500, 1001, 719, 2007
ı i Realtek - RtlService Application Version 700, 1004, 1207, 2009
ı i RichVideo Module Version 2.0.1.5417
i Safer Networking Limited - Secure Shredder Version 1.9.0.0
i Safer Networking Limited - Spybot - Search & Destroy Version 1, 5, 2, 0
i Safer Networking Limited - Spybot - Search & Destroy Version 1, 6, 0, 30
i Safer Networking Limited - SpyBot-S&D Version 1, 6, 2, 0
ı i Safer Networking Ltd. - Spybot - Search & Destroy Version 1, 6, 0, 0
i SmartSound Sonicfire Pro Version 5.7.1
i Sun Microsystems, Inc. - Java(TM) Platform SE 6 Version 6.0.0.105
i The Audacity Team - Audacity® Version 1,3,13,0
Can anyone help me get this app going... please!!
Thanks in advance!
DNThis is frustrating! I just answered this post at length, but when I posted it it disappered!
Guess I have to start over and hope for the best!
Is that an HP laptop?
No, it is a desktop. However it is an HP 'hybrid' all-in-one, and uses a lot of laptop hardware and software to keep the low profile case.
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
I read this and it does not apply to my system.
Otherwise, unless I missed it, I do not see mention of your graphics/video card brand/model and driver number
This is why I asked how to upload the Belarc report! Too much info to post. Here is the Graphics info.
Name
NVIDIA GeForce Go 7600
PNP Device ID
PCI\VEN_10DE&DEV_0398&SUBSYS_2A40103C&REV_A1\4&1BC86A40&0&0020
Adapter Type
GeForce Go 7600, NVIDIA compatible
Adapter Description
NVIDIA GeForce Go 7600
Adapter RAM
256.00 MB (268,435,456 bytes)
Installed Drivers
nvd3dum,nvd3dumx.dll
Driver Version
7.15.10.9804
INF File
oem12.inf (nv_NV3x section)
Color Planes
Not Available
Color Table Entries
4294967296
Resolution
1440 x 900 x 59 hertz
Bits/Pixel
32
Display
Nvidia Flat Screen [Monitor] 19.25" vis
Driver
c:\windows\system32\drivers\nvlddmkm.sys (7.15.10.9804, 5.73 MB (6,006,696 bytes), 1/25/2007 6:43 PM)
Check the ATI or nVidia or ??? website to be sure you have a current driver
Another interesting story, that! Nvidia/GeForce does an auto detect and correctly identifies the graphics card, and sends me to a link to upgrade the driver. The driver page says it is for Vista x64 and Win7 x64 (even its long name has 'win7-x64' in it). I download and attempt an install, and it comes back with "you are running Windows 7 64-bit. This driver is for Vista only. Installer closing." I went back and tried 4 other Win-7 x64 drivers, all reported the same thing, even though they state on the site they are for Win7 x-64. I then went to the Device Manager and tried to update the driver, but it reported using 'the most current driver available'. So I uninstalled the current Nvidia driver, which put me into VGA mode. I then went to Windows Update and did a search for updates. It found a missing Nvidia driver and called it 'Nvidia Driver for Win7 x64'. I downoaded and installed it and my system returned to normal 1440 x 900 display. I checked the driver info and it is the same driver as the original, including the release date, so apparently the original driver was in fact x64 compatible, and there does not appear to be an updated driver for it.
Also, for laptops... if that is what you have
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modul es.html
-http://forums.adobe.com/thread/1001579
It is not a laptop, but as it uses many laptop softwares and hardware, I will check these and see if they help. I will post the results.
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
There are no DISPLAY options in my BIOS setup. There is also no update available for the BIOS from HP
Thanks for the help.
DN -
Hi,
My SD card reader is not able to write or delete and format sd cards.
WIN7 x64 Home Basic, 0x80070013 when I trying to write or delete files. When I trying to format I can see a message that disk is write protected.
The card is not locked, it's work in Lenovo Idea Pad s10 without any problem, It's also work in my Pentax camera.
I'm almost sure that the problem is software, but can't find solution.
Could Any one help me please?
Laptop is new, 8 days in use.I have network shutdown 2.0.1 installed and the pcns process normally would be abend in 1 or 2 minute's time. What could be the problem ? Consider to upgrade the network shutdown to 2.2.1 version. Could the problem be resolved in new version ? Any precaution needs to be taken when installing the new version ?
Terence. -
Freezing issues with MSI 970A-G43 and AMD FX 8320
Hey all,
I bought my brother a new system a few days ago, but he has had serious issues with the machine crashing ever since.
The machine has had a fresh installation of Windows 7, it has all the latest drivers for both motherboard, sound, chipset and video card (Latest VGA driver tested as well as the latest Beta version)
I thought the problem might be with the VGA card, as the computer would just shut off during 3d Gaming, but it also seems to happen when surfing the internet or doing normal "2d" activities
What happens is the computer will just seemingly shut off, the LED lights on the front of the case, around the dials, start blinking and the only way to get it back up again, is to turn if off at the power supply unit and then turn it back on again.
I'll paste in what my brother sent me (As I live in the UK and can't see the machine crashing myself), he said:
I dunno what the issue is but, last night the comp just shut off in middle of game play on 3 different games, and the lights were flashing, I had to turn complete power off to the power box and back on to restart comp, I kept checking all my temps with speccy and speed fan and nothing seemed high at all, also when it shuts off and I re start it, a lot of my desktop icons move around to different spots,
Update: crashed a few times on me, once playing euro, once just browsing Internet 5 min after the first one, changed out ram just for shots and giggles and ran euro on ultra for about 5 min and crashed. I dl a gpu monitor gadget, was accurate on temp but said the gpu was 0% but with just Internet would randomly jump to 99% or 40% then back to 0 and would stay and eventually crash
Spec is:
AMD FX-8320 3.5GHZ EIGHT CORE
500GB SATA III 6GB/S 7200RPM 16MB
COOLERMASTER SEIDON 120M WATER COOLER
4Gb DDR3 / 1600 MHZ MEMORY
MSI 970A-G43 AMD 970 CROSSFIRE AM3+ DDR3 USB 3.0 SATA
CORSAIR 500 WATTS CX500 V2 80 PLUS POWER SUPPLY
ASUS XONAR DG 5.1 CHANNELS PCI XONAR DG SOUND CARD
AMD RADEON 7750 2GB PCI-E
There was a concern I did have when I did search earlier, via a thread on Tomshardware in which a similiar board had issues with the FX8350's wattage going above the stated 125 watts and causing the board to freeze.
It's a different board/chip, but I wonder if the wattage of the CPU goes above 125W and causes problems on the board? Hmm
I feel really guilty right now, because I bought this for him as a present, it was $700ish plus shipping etc and it's been nothing but problems ever since.
I'm going to see what version of Bios he's running when he gets out of bed, but the Live Update software said there were no updates, but I'll have him check manually.
Another issue I noted, was I sent him some ram before the PC arrived, which was:
XMS3 — 8GB Dual Channel DDR3 Memory Kit (CMX8GX3M2A1333C9)
He originally put that ram in with the existing 4gb of ram, so I thought it "Might" be a conflict, due to them having a different Mhz value
So I had him remove the 4gb stick that came with the PC
As soon as he entered the bios, it froze and did so twice
So he removed that ram and put back the original 4gb stick and the bios worked
No idea if the two are related.I hope this doesn't count as necro-ing a thread (last post was in October), but it's the one closest to my situation.
I have the following setup:
MSI 970a-g43 motherboard
AMD FX-6300 cpu
ATI Radeon HD 4550 graphics card
4x 2GB RAM sticks
2x 500 GB 3.5" SATA hard drives
CoolMax 700W psu
16x r/rw DVD burner
cheapo SD and others card reader that fits in the floppy drive bay
Older PC tower that has a temperature sensor built into it
I built it around November 15th, and it worked until a couple days ago (December 12th I think), when it started doing the sudden shut-off thing. Same as Adresch described: shuts off, tower light blinks, have to flip the i/o switch off and back on to boot again. I consulted a friend for some suggestions, and he said I should put a water cooler in there, because the stock heatsink that comes with most processors are junk. So I went out and bought a Corsair H55 water cooler and installed that.
The computer seemed to run for a bit longer before shutting off. I loaded up the BIOS software, SpeedFan, and HWMonitor. SF said the CPU was running average of 48*C, and GPU was averaging 51*C. The CPU's highest was at 61*C and its lowest was 36*C. BIOS software said CPU was at 35*C the whole time. HWMonitor listed the GPU at 51*C, and the CPU at 7*C. These are all very inconsistent with each other as far as I can tell, so I don't know what to make of these readings. Didn't seem to much matter as the computer continued shutting off.
My options then being replacing the PSU or the motherboard, I decided to replace the power supply, since I was just within the 30 days. Switched for a ThermalTake TR2 700W. Before installing it, I pulled the tower's CPU temperature sensor wire from between the water cooler heatsink and the CPU, just in case. Then I installed the PSU, checked and rechecked all of the connections, and turned it on.
Nothing.
I then spent the next two hours rechecking everything, even unplugging everything and putting it back together. Still nothing. The best I could get was a flicker of the tower light and the fans doing a quarter turn before ceasing movement. The red LED on the front of the SD card reader stayed on the entire time, though, so I guess it was getting at least a trickle of power. I also removed everything but the PSU, motherboard, CPU, and one stick of RAM. Still no power. I think the new PSU may have been open box, so I'm returning it today for a different one, and even bumping it up to 850W.
I'm not sure that will solve my original issue though, so I'll be looking for a heatsink to put on the VRMS as mentioned. Just thought I'd get this down in a relevant thread in case anyone had other thoughts on what could be going on.
Maybe you are looking for
-
Is it possible to change the font size and weight in an ADF table?
Is it possible to change the font size and weight in an ADF table? I have tried to change the various font size and weight settings for a table and its columns and they seem to have no effect on the font size or weight in a table row.
-
Dynamic variables: SELECTION-SCREEN PUSHBUTTON
hi, how I can create 100 buttons on a cycle so dynamic? example: SELECTION-SCREEN BEGIN OF LINE. SELECTION-SCREEN PUSHBUTTON (4) TEXT-001 USER-COMMAND but1. SELECTION-SCREEN PUSHBUTTON (4) TEXT-002 USER-COMMAND but2. SELECTION-SCREEN
-
IPhone doesn't rings in sleep mode, it shows missed calls everytime
my iPhone only rings while using it or it's not in sleep mode. whenever i put it to sleep mode it doesn't ring. i've checked the silent switch. i've tried resetting network settings. ipod is still playing Please Help! Thank You!
-
Hi, i would like to know if it's possible to have a parameter with more then one value. SELECT DISTINCT IPESSOA FROM TGTPESS0 WHERE IPESSOA IN (:PARAM); Where the PARAM parameter have the value 'DAVE,LEWIS' and i obtain two rows IPESSOA DAVE LEWIS Th
-
Getting static member from Field
Hello, I have a 'static type safe enum class' and I want to use reflection to implement its toString() method, the String returned should be the name of the field. (Note that the static instance variables themselves do not have String fields that cou