N560GTX-Ti OC freeze during CoD4 MP after update VGA BIOS with Live Update

hi
I updated the bios via live update , and i want the stock one back couse cod4 freezes my pc after a few minutes so i cant play
please help me.   
(i am sure thats the problem couse i could play the game before i done that update... i thought it will be useful since it was telling me there was an updat, and updates usually great , right? )
s\n : 602-V238-130B1103125151
thank You in advance.
oh and please tell me the exact right way to update it, i dont want to fry my vga card 

well i reinstalled my x64 win7 after the bios update (full wipe) and the problem remained the same...
also tried older nvidia drivers too( but i played the game with the newest without any errors) and tried the stable one that was with the vga.  still freezing the game

Similar Messages

  • N560GTX-Ti OC problem after update VGA BIOS with Live Update 5 | SPLIT

    Hello there. You people say the latest BIOS version for 560 OC is 201, but mine is totally different: 70.24.0a.00.00.
    And I experience strange stuttering in all of the games. Maybe BIOS upgrade is needed?
    S/N: 602-V238-16SB1101160663

    Could you please give me the password for the attached file (201ti_Svet.rar)? I'm having occassional freezes with my GTX 560 Ti Twin Frozr OC (system completely stops responding while display and sound freeze and it takes around 5 seconds for the PC to respond to reset button). This happens, for example, under Windows 7 in 3DMark11 Deep Sea Demo and in Windows XP randomly, but most often in web browser when watching Adobe Flash content with hardware acceleration enabled? I sincerely hope that BIOS update will help. Thank you in advance.

  • MBOX K9VGM-V after Flashing the BIOS successfully Live Update crashes system

    I recently purchased a barbones computer with the K9VGM-V motherboard.  After installing all the drivers on the disk, updating Windows 2000 competely through Windows Update I decided to try Live Update.  The first thing I updated was my BIOS from Ver. 1.6 to 1.7.  The flash was completely successful.  However when I went back to Live Update(the latest version btw) the minute I executed the program my system completely crashed!  It was like I had hit the reset switch.  I decided to format my HD and reinstall everything.  The BIOS works fine and the system is entirely stable, but even after starting with a clean slate I tried the Online version of Live Update and the same thing happened.  My computer crashed and restarted itself.  This happened after the BIOS flash so it must be related to that.  I am just not sure how or why.  Any suggestions or input?
    J.C.

    Read Moan Guide
    So you have crash only when trying to using LiveUpdate or? If yes just ignore it and do not use LiveUpdate

  • Hi- Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7.

    Hi- My  Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7 yesterday. My phone is dead and wouldnt power up ..have tried resetting using itunes but i doesnt detect the phone and..pressing sleep/home button doesnt do anything

    Update
    I guess that it just had a bad connecting port on the phone itself, no clue why it wouldn't work when plugged in both ways other than there is actually some differentiating between the two sides.

  • My MacBook pro freezes during start up after 30 secs. Any ideas?

    My MacBook pro freezes during startup while the logo is still showing and the moving circle stops after about 30 seconds. Any ideas please?

    On my Mac that DSMOS message appears about 20 seconds into the boot process.  Booting finishes about 30 seconds after that.
    Do those letters "v" really appear on the screen?
    Unfortunately, if those are the last messages on the screen, I see nothing there that explains the hang.  The next message I see after the DSMOS message is one about an AirPort daemon, although I'm not sure I understand any connection there might be between that and your hang.
    Since you don't have a system restore disc you won't be able to do the next thing I was going to suggest, which is to run the diagnostics that came with that Mac.  If you have an OS X 10.6 installation disc, you could try reinstalling OS X over the top of what's on it now.  Right after that finishes use Software Update to apply any missing OS X updates, or download and install the "combo" updater for the version of OS X 10.6 that you want.  If that Mac has a software problem doing that might help.

  • Windows freezing during boot,after vga drivers installation

    System freezes during the boot process,as soon as i install nvidia drivers.i ve tried eliminating the problem with several ways,but nothing seems to solve it.different windows version,different drivers version,different cpus,different memories,nothing attached on the board except the hdd and ram,different psu,manually installing drivers,stopping nvidia services,different vgas(9600gt,9800gt,gts240/250)although it works with pov 9300gs or 8600gt 512.additionally,system boots up normally in safe mode.is there anything you can possibly propose?
    thanks in advance.
    cpu:intel c2d e8500
    m/b:msi p43t-c51  ms7519 latest bios
    memory:2x kingston 2gb 6400
    psu:premier 450w
    vga:point of view 9800gt 512 green edition
    os:windows xp pro 32bit
    hdd:500gb hitachi
    pci:serial port oem card

    guys i have the exact same problem it has nothing to do with psu i have a coolermaster 800W and a msi9800gt vga this m/b has compatibility issues with nvidia graphics drivers and some nvidia vgas. I have two of them. Both have the same problem get an AMD graphic card. Trust me i know what i'm talking about. I tried every possible solution out there nothing worked. I emailed msi technical support they just send me latest bios and latest drivers nothing. I tried to update vga bios nothing. I tried tree different psu all from different vendors guess what nothing. I changed my memory modules nothing. I changed cpu nothing. I tried every bios available nothing.

  • Atv freezes during screensaver

    Recently my atv has been freezing periodically after the screensaver kicks in. It shows a number of pictures and after a few minutes just hangs. I am able to hit the menu button which then takes it to a black screen where it sits for about 2 mins until the atv reboots. Anyone else having this issue?

    My ATV2 also freezes during screensaver. It seems to happen with origami and floating, but I have not noticed it with Ken Burns. In the case of Origami, the pictures just froze. Then I hit menu, and the screen went black. The music kept playing. However, I could not use the menu button anymore after that. I had to unplug the ATV2 to force it to reboot. In the case of floating, the screen went black, the music kept playing, but the behavior was different. The first time this happened, I just waited a while. Then the music stopped. I suspect it must have rebooted on its own. After that I was able to use the menu button and restart the music and screensaver. The second time it happened, I immediately used the menu button and was able to navigate back to the settings menu for screensaver. I then hit preview, and was back in business. So, coupled with the problem of the screensaver repeating photos, the ATV2 has some real problems. I hope there is a new release soon.

  • P67a-gd53 wont boot after live update

    my computors been fine for the last 12 months but for some daft reason i downloaded live update 5 last night and set it off
    today the computor was on when i came to it (after i turned it off last night)
    blank screen
    i pressed reset and it started looping initial boot
    comes on 2 beeps waits a few seconds fans running and shuts off
    few seconds later and it repeats
    comes on 2 beeps waits a few seconds fans running and shuts off
    all 6 aps leds are on during the boot
    im guessing something in the live update has killed my motherboard?

    Try pulling the PSU power cord, removing the battery for awhile, clear CMOS. If it will then get to the UEFI/BIOS screen, reset and see how it goes. If the OS was loaded under AHCI, be sure to remember to set the SATA controller mode again and also set the correct boot order.
    Added: And remove Live Update from your computer.

  • Start up problems after Safari 3.1 and Security update

    Updated safari and security update last night.
    Safari downloaded and installed but there was an error downloading or installing the security update, I forgot.
    After I restarted everything booted up fine, but was stuck on "Starting Mac OS X" screen.
    Did a fsck and zap the pram, still stuck.
    Today I tried booting up in safe mode, stuck on the gray screen with the apple logo.
    Then I tried booting up from an external firewire dvd drive. Repaired permissions, repaired the disk, but it is still stuck on "Starting Mac OS X" screen. Help please...
    Thank you

    Ok i had a similar problem, with all the recent updates for Leopard, including the 10.5.2 combo update... the 12" PowerBook G4 kept getting stuck on the grey apple and spinning wheel... if it managed to get past this it would get stuck on the blue screen!!!
    The way i got around this, after trying all these other tips was: Archived & Installed 10.5; restarted, waited; downloaded 10.5.2 Combo update, installed; restarted, waited; waited; waited; after getting back to desktop, restarted, waited; then ran Software Update only installing one at a time, and after each install, restarted, waited; when all Software updates completed, proceeded with iLife updates etc... It took a while (still quicker than the 3 days of failed installs and updates) with a lot of waiting on the blue screen (5-20mins) but we got there in the end. Disks where checked with Leopard Disk Utility before and after, permissions where checked before and after completing all installs, also with a DW 4.1 optimization. Also note worthy is the RAM was upgraded from the initial 256Mb (!!!) with an extra Gb.

  • No sound on K8N Neo after upgrading to BIOS 1.9

    Hi,
    I cannot get the internal sound to work through the digital outputs (SPDIF or optical) after upgrading to BIOS 1.9. The analog aoutputs work fine as did the digital prior to upgrading to 1.9 (don't remember exactly but I think I had 1.7 before).
    I have connected my speakers (with internal DA converters) with both SPDIF and optical cables.
    I have tried every combination of speaker settings and outputs in the Realtek audio manager to no avail.
    As a sidenote my other, external, soundcard (M-box MobilePre works fine) connected to my speakers.
    The mobo is a K8n Neo (7030) and audio drivers latest Realtek AC97.
    What can I do?
    Regards,
    Henkan

    Henkan,
    Welcome to our forum.
    What method did you use to update to v1.9?
    From what you posted the BIOS update caused your sound problem, so you need to either re-flash BIOS 1.9 or go back to the previous one that worked for you.
    Read these thread about flashing BIOS:
    1- using WINflash https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
    2- using DOS https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
    DO NOT USE LIVE UPDATE - DO NOT USE LIVE UPDATE
    Good luck,

  • After installing Lion, the Software Update "can't check for updates because of a network problem.But I've no network problem. My internet is working properly. could you help me?

    After installing Lion the Software Update "can't check for updates because of a network problem". But I've no network problem. My internet is working properly. Could yoy help me?

    Hi All
    Same problem this morning but now resoloved.
    Update require using the following url  support.apple.com/kb/DL1437 update for lion 10.7.1
    updates now work with this update
    Hope this helps
    Thanks

  • My 4th gen ipod won't backup after it froze during a software update to 4.3.5. I had to cancel the backup at the start of the update and now it won't let me backup to my computer, freezes during backup or says my backup is corrupted.

    I pressed 'X' during a backup after it froze during an update to software 4.3.5 and now it won't let me backup on my computer. Does anyone have any ideas? It either freezes during backup or says my 'backup is corrupted' or 'I cannot backup on my computer'. I have had to abort quite a few attempted backups since the initial problem, which I think has made it worse. I have already tried restoring my ipod, deleting the aborted backup from my preferences/devices in itunes and deleting it from my user/appdata/etc on my PC hard drive. Any ideas what to try next?

    After hours of frustration I eventually decided to restore. I lost my apps, but i didn't have many and was able to reinstall them for free. During the restore it updated my ipod to the latest software 4.3.5, which i think may have caused the initial problem, but the backup issue remains. Sometimes it stops me from syncing and other times it allows me to skip the backup, but still says that i can't backup on my computer. I'm worried that it has done something to my computer as it took me six hours to do a Bullguard scan, which only normally takes about an hour. The scan didn't come up with any viruses, but it stalled at system32 for ages. The only other thing that i can think of is that a demo CD I uploaded may have caused a problem. iTunes couldn't find a track listing for it but gave me a few different options. i thought I had to choose one to continue, so did that then changed the track details to the correct tracks. I'm now worried that may have introduced an issue or caused a glitch in iTunes. How paranoid am I sounding?  

  • Freeze during startup after SW update from 10.4 - 10.4.8

    After updating to 10.4.8, my machine would freeze during startup (at the gray screen with the apple and spinner) and give me the "Please restart your computer" message in a few languages.
    I thought it might be a RAM issue, so I removed all third party RAM - same problem.
    I replaced all of the RAM with RAM from another G5 that I know worked - same problem
    I moved the HD from my G5 to another G5 that was working - same problem (I believe that eliminates the motherboard and any other components from being the problem).
    I thought that the HD might be bad, so I replaced it with a brand new SATA drive, installed 10.4 and it worked perfectly, ran all of the SW updates (including the combined 10.4.8 update) and I get the same freezing again when I reboot.
    Any suggestions are appriciated!

    Hi Joe,
    Welcome to the only place where you can get friendly advice.
    Ok have you tried starting up from the installer / restore CD that came with the mac and run disk utility??
    Try hardware test doing the extended test in a loop to try and find the base of the Kernel panic (thats what the "you need to restart your computer" image indicates)
    For info and guidance on Kernel panics see:
    http://docs.info.apple.com/article.html?artnum=106227
    and trouble shooting info:
    http://docs.info.apple.com/article.html?artnum=25392
    for extensive advice on solving the kernel panics see:
    http://www.thexlab.com/faqs/kernelpanics.html
    Worst case senario it could be the G5 processors, make sure you have applecare; just in case it gets expensive!!

  • Freezes during "starting windows" message even after factory reset.

    I've gone through diagnostic tests and they've shown it wasn't a hardware error. After a failed update to windows 10 my computer rolled back to windows 7. After the rollback when attempting to boot win 7 It froze and hung on the starting windows screen.  At first i was able to boot in safe mode and navigate the desktop and drivers, but after plenty of failed fixes i had to result to a factory reset with alienrespawn. After the factory reset the issue still persists, and i can no longer boot up in safe mode. When i do, it tries to do first time installation and says that i has to reboot in normal mode to complete first time config. My computer didn't come with a disk so i can't re-install windows 7, and factory reset dosen't seem to fix the issue. All I need is to resolve this issue so i can get back with a clean slate to upgrade to windows 10. Any ideas?

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer freezes during the "Starting Windows" message on your desktop, and I would be happy to help! Since your Alienware X51 computer is a Dell product, I recommend contacting Dell Technical Support for further assistance in this matter. Best Regards

  • Freeze during boot after enabling Hyper-V feature in Windows 8

    Good day.
    I'm using AMD FX 8320 with 990FXA-GD65. After enabling hyper-v my pc freezing during boot.  Google told me that it might be issue with USB 3.0 controller, so i disabled it in bios, but result still the same.
    Can you please tell me where should i look at?

    Hi,
    Please try to boot into WinRE and run the Startup Repair option.
    Generally speaking, when you add feature like Hyper-V, system would take a long time to get this feature configured. if your computer still stay updates configuration steps, you can use Windows 8.1 installation image to repair system. In system repair mode,
    you can access into Command Prompt mode, and check CBS.log under C:\Windows\logs\CBS.
    This log file would record Windows installation process, we may find the problem of Hyper-V installation.
    Kate Li
    TechNet Community Support

Maybe you are looking for