N560GTX-Ti OC problem after update VGA BIOS with Live Update 5 | SPLIT

Hello there. You people say the latest BIOS version for 560 OC is 201, but mine is totally different: 70.24.0a.00.00.
And I experience strange stuttering in all of the games. Maybe BIOS upgrade is needed?
S/N: 602-V238-16SB1101160663

Could you please give me the password for the attached file (201ti_Svet.rar)? I'm having occassional freezes with my GTX 560 Ti Twin Frozr OC (system completely stops responding while display and sound freeze and it takes around 5 seconds for the PC to respond to reset button). This happens, for example, under Windows 7 in 3DMark11 Deep Sea Demo and in Windows XP randomly, but most often in web browser when watching Adobe Flash content with hardware acceleration enabled? I sincerely hope that BIOS update will help. Thank you in advance.

Similar Messages

N560GTX-Ti OC freeze during CoD4 MP after update VGA BIOS with Live Update

hi
I updated the bios via live update , and i want the stock one back couse cod4 freezes my pc after a few minutes so i cant play
please help me.
(i am sure thats the problem couse i could play the game before i done that update... i thought it will be useful since it was telling me there was an updat, and updates usually great , right? )
s\n : 602-V238-130B1103125151
thank You in advance.
oh and please tell me the exact right way to update it, i dont want to fry my vga card

well i reinstalled my x64 win7 after the bios update (full wipe) and the problem remained the same...
also tried older nvidia drivers too( but i played the game with the newest without any errors) and tried the stable one that was with the vga. still freezing the game

Problems when scrubbing through timeline with live update on

Hey guys! I have a problem. Sometimes when I scrub through my timeline in AE with live update on and I try to get to a frame that hasn't been rendered yet, AE freaks out. On my windows taskbar, multiple instances of AE seem to populate the taskbar (although none of them are selectable) and the screen flashes in between my desktop BG and AE. Any thoughts? thanks!

Check the Event Viewer for the exact cause of the crashes. sounds like the same old driver crashes, which could be your graphics card or another component on your system like audio devices. Also verify your device manager for any devices that may be flagged and repair their drivers. This can go down to trivial things like your SATA controlelr driver or the temperature monitoring of the chip sending wrong signals when it supposedly gets too hot...
Mylenium

MBOX K9VGM-V after Flashing the BIOS successfully Live Update crashes system

I recently purchased a barbones computer with the K9VGM-V motherboard. After installing all the drivers on the disk, updating Windows 2000 competely through Windows Update I decided to try Live Update. The first thing I updated was my BIOS from Ver. 1.6 to 1.7. The flash was completely successful. However when I went back to Live Update(the latest version btw) the minute I executed the program my system completely crashed! It was like I had hit the reset switch. I decided to format my HD and reinstall everything. The BIOS works fine and the system is entirely stable, but even after starting with a clean slate I tried the Online version of Live Update and the same thing happened. My computer crashed and restarted itself. This happened after the BIOS flash so it must be related to that. I am just not sure how or why. Any suggestions or input?
J.C.

Read Moan Guide
So you have crash only when trying to using LiveUpdate or? If yes just ignore it and do not use LiveUpdate

How do you update smart playlists with live update turned off?

If I create a smart playlist in itunes and deselect live updating then how exactly does the smart playlist load up?
The reason I ask is that started setting up Smart Playlists for all of the artists on my computer and they're all set to live update which is consequently slowing down my itunes. I realize that I may not necessarily need that. My question is though...how exactly would I go about manually updating a smart playlist that has live updating turned off?

Well, the problem is that I have smart playlists for every artist in my library (which is literally hundreds). With every live update turned on, every time I edit tags for a new single or something it'll scan all the smart playlists for matches. The reason I'd like to have smart playlists instead of regular playlists is that I tend to add a lot of singles, and, especially in the hip hop genre, they tend to have a lot of guest appearances so I'd like the smart playlists to do tehir job.....I'd just prefer to not have it set to live update so I can avoid delays during tagging.
Apparently this is a known side efffect of having many smart playlists in your itunes. I realize my way of working with them might be slightly unconventional in comparison to how they are typically used but it's great for me. If I could leave live update on without any performance degregation then I would but it seems I have to pick.
I read somewhere that if you shut down itunes and restart that it'll refresh all your smart playlists (if live update is turned off).

Manually and quickly updating smart playlists with 'Live Updating' off?

Hi,
I have a quite large music library (13,000 songs) and use a multitude of nested smart playlists that change often because I don't want to listen to the same song every day and I want to listen to good songs more often than bad songs. I'm also splitting up by genre, because not all my friends appreciate all of my musical tastes, and I myself am not always in the mood for every genre.
The consequence of this is that from time to time, iTunes stutters when playing a new song, presumably because it's updating all the smart playlists when the previous song ended.
Now, I had hoped that turning 'Live Updating' off would cause iTunes to update the smart playlists at startup instead of updating continuously. However, it turns out that though the performance improved dramatically, turning off 'Live Updating' caused the smart playlists to never update. Obviously I don't want that, since that means all my smart playlists are static.
Is there a way to have both good performance and easy updating of the playlists? There are a bit too many playlists to manually update very day by forcing iTunes to update the playlist.
An 'Update all smart playlists now' button or a 'Update all smart playlists at startup' feature would be nice...
Any hints, tips, help, suggestions?
Thank you so much.
Greetings,
Tijl Kindt
Athlon64 3800+ 2GB RAM Windows XP iPod Nano 4GB Black

Using the SDK, you (well, I) would do something like this:
1. Get a list of all the playlists in the iTunes Library.
2. For each playlist, test if playlist is a Smart playlist (Playlist->Smart() returns a boolean)
2a. If it is a smart playlist, select it by setting a property value for the BrowserWindow object (basically BrowserWindow->SelectedPlaylist(playlist object)) (for example perl code, see http://groups.google.com/group/comp.lang.perl.misc/browse_thread/thread/1248563d 743795d8/be1a88fc6eeab0e4?lnk=gst&q=itunesperlselectedplaylist&rnum=1#be1a88fc6eeab0e4)
2b. Using keystrokes (Alt-F,G), select "File..Get Info". Then keystroke Alt-U to toggle live updating, then Enter to click OK.
2c. Repeat above, which should toggle live updating off again. (unfortunately there is no way to be sure whether the starting state was off or on -- I'm assuming it will always be off)

When updating vga bios nothing happens

Hi,
i've got MX440-8X on Athlon XP 1800+
I'm trying to update the bios using Live update. This could be necessary for the drivers to run under linux. (also problems there )
While running the utility everything apears to go well except the screen does not go blank like stated.
Afterwards it ask to restart the system, and when I run Liveupdate again it looks like nothing has happened because it offers the same update over again.
Does anybody have any idea what goes wrong?
Any help is greatly appreciated,
Thanx!

Is the BIOS Rev. of the card the same as what live updates has to offer. I bet that it is. Anyway there should not be any reason to update the BIOS on your video card unless you want problems. live update Suck's allways has allways will.

Cannot finish update with live update

Every time I try to update my drivers with live update 2 (latest version), It starts downloading and then just stops and NEVER finishes the download.
Anyone got any suggestions?
MSI NFORCE
512 MEGS RAM
AMD 1700+
40 GIG WD HD
CABLE MODEM (ATTBI.COM)

JErnst,
I didn't use the MSI WHQL'd 2920 driver, but i suspect it's the same as the one I did use, as it doesn't come with a Setup.exe
However, all you've got to do is to go into the Control Panel...System...Hardware....Device Manager. Select your Display Adapter (graphics card), rt-clk and select properties
On the Driver tab, select update driver, and select the location where you unzipped the drivers. It should require a reboot.
HTH
BIM2k

MS-6215 Video Standby problem - need new VGA BIOS

MSI Tech Support please respond to this----
I have issues with the Video on the MS-6215 (MS-6351) board. I originally had a version 1 PCB that had numerous stability issues, BUT it worked just fine when connect to the Composite Video Out only and NOT the VGA out. In other words, I had it connected to a TV for a HTPC-type setup. But, they finally fixed some of the issues and I updated the BIOS, well, with that BIOS they included a new Intel i815 VGA BIOS. It only now occurs to me that is important. Well, So now I can turn the computer on and use it on the TV, but once I have it go to standby (any form S1, S3, etc), the video will not return on wake up and the system is completely unresponsive.
MSI graciously *after 5 months of fighting to hear back from them* RMA'd the board and provided me with a Ver 5 PCB. Still the same Video problem. THe latest BIOS still includes a VERY old, and perhaps very buggy VGA BIOS.
There is a much more recent (and have been SEVERAL since the one included in your downloadable mobo BIOS) of the VGA BIOS available at intel's website.
I am convinced that it is simply the VGA BIOS that needs to be updated. COULD YOU PLEASE Integrate Intel's newest 815 VGA BIOS into an update so that the system is usable. Its a pain to have to leave it on 24x7. when I only really need it to wake up when I need files off it or want to use the HTPC functions.
The latest version intel has is 2682 dated 7/18/2002
The version you included is 2462. mobo bios dated 10/23/2001
link to Intel's version - http://ftp://aiedownload.intel.com/df-support/4657/a08/win2k_xp67.zip
it is found in the vbios folder.
THANK YOU!!!
JIm Depew
jdepew [at] bigfoot.com

Thank you wonkanoby - maybe this will finally clear up the issue. I can't imagine it is all that hard to integrate the new Video BIOS and up the version number to 2.1
Please, someone in MSI's BIOS building dept, take 15 minutes out and fix a very blatant problem - it will make me and perhaps many other users VERY HAPPY!

Start up problems after Safari 3.1 and Security update

Updated safari and security update last night.
Safari downloaded and installed but there was an error downloading or installing the security update, I forgot.
After I restarted everything booted up fine, but was stuck on "Starting Mac OS X" screen.
Did a fsck and zap the pram, still stuck.
Today I tried booting up in safe mode, stuck on the gray screen with the apple logo.
Then I tried booting up from an external firewire dvd drive. Repaired permissions, repaired the disk, but it is still stuck on "Starting Mac OS X" screen. Help please...
Thank you

Ok i had a similar problem, with all the recent updates for Leopard, including the 10.5.2 combo update... the 12" PowerBook G4 kept getting stuck on the grey apple and spinning wheel... if it managed to get past this it would get stuck on the blue screen!!!
The way i got around this, after trying all these other tips was: Archived & Installed 10.5; restarted, waited; downloaded 10.5.2 Combo update, installed; restarted, waited; waited; waited; after getting back to desktop, restarted, waited; then ran Software Update only installing one at a time, and after each install, restarted, waited; when all Software updates completed, proceeded with iLife updates etc... It took a while (still quicker than the 3 days of failed installs and updates) with a lot of waiting on the blue screen (5-20mins) but we got there in the end. Disks where checked with Leopard Disk Utility before and after, permissions where checked before and after completing all installs, also with a DW 4.1 optimization. Also note worthy is the RAM was upgraded from the initial 256Mb (!!!) with an extra Gb.

Still the same problem with Live update 2

I still have the same problem with Live update 2.
I've downloaded newer Bios update but it's 13 MB... it's obvious that I can not have
in floppy disk and I'm a little bit uncomfortable of updating bios from CD-rom .
But what else can I do, besides updating Bios to get out of this Live update from start-up.
Should I clear CMOS?

13mb are you really sure ?
go here instead.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436&kind=1
the download file is around 300kb.
make sure you get the right file.
you did not specify if you got L or ILRS.
also dont use live update.
get drivers from http://www.nvidia.com instead.

Updated bios via Live Update and now my Network card isn't detected

I have an msi Z87-GD65 Gaming Motherboard and I updated some drivers and the bios via msi Live Update 6 last night and now my computer refuses to recognize my network adapter. The adapter is a TRENDnet N600, plugs into PCIe if I'm not mistaken. Wifi if my only option with this computer, I can't use ethernet, so it's really important I get the network card working again. I have had zero issues with it until this.
The reason I was updating was to try to get my third monitor to work when plugged into the mobo, while my other two were plugged into the graphics card (which I also installed yesterday, but it's working fine). Note that it still was not working, but I had enabled the IGD Multi-Monitor from bios.
Any suggestions would be appreciated. I did try uninstalling the drivers but it still won't detect the network card. I also tried disconnecting and reconnecting the network card (and I cleaned the port for good measure).
I've only been using Windows computers for a year, so bear with me if there's stuff I don't know. Thanks in advance. I can try to get a full list of what was installed later tonight, but all of it that I can find has been uninstalled at this point.
Note: I did not flash the bios when I installed, which I have now heard is a bad idea, apparently. l:

what OS you are running?
Quote
Note: I did not flash the bios when I installed, which I have now heard is a bad idea, apparently. l:
you said you've updated drivers & BIOS:
Quote
I updated some drivers and the bios via msi Live Update 6 last night and now my computer refuses to recognize my network adapter.
can you clarify is you update BIOS too or not?
and what is your current bios version?
Quote
and I updated some drivers
what kind of drivers?
Quote
I did try uninstalling the drivers but it still won't detect the network card. I also tried disconnecting and reconnecting the network card (and I cleaned the port for good measure).
have you tried to load last good known configuration or the last windows restore point?
or to reinstall OS?

Problems after transfering Cost centers with LSMW

Hi,
I have a problem after transfering Cost Centers with LSMW.
The first Batch input run created all cost centers in one CC Group erroneously - cause they should be placed in different CC groups.
I changed LSMW settings and made another batch input run - now the Cost centers were created in proper groups. I think that I deleted all CC's created in previous batch input run, but now I am not too sure, because there is a problem...
Cost centers exist both in their proper groups and in the one group mentioned by me before. So there is such situation that Cost center appears in Standar hierarchy twice at the same time.
When I delete cost centers - they are removed from their proper groups but the CC entry remains in that one group - all CC are there inactive.
How can I get rid of them. I tried deleting them - but it's impossible - the system doesn't see them.
When I run the batch input again - the same cost centers appear in proper groups and at the same time they become active in the one group. The standard hierarchy group is not UNIQE.
Please advice me how to delete these entries from standard hierachy.
Best wishes,
Karol

Hi,
Always recommended before loading into live system: upload in test system and check. check again just to make sure all is correct before real load.
In your case you probably would have been best to do a group change after incorrect upload.
Do Ambiguity check in stadnard hierarchy to explore all incorrect entries. Depending on your version yo ucan change in that function (ECC6) ore need to run a report. Before running the report check that CC master records have correct entry. The report is RKCORRH1
Again, try in QA first and run in Test Run
Good luck
Hein

Hi- Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7.

Hi- My Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7 yesterday. My phone is dead and wouldnt power up ..have tried resetting using itunes but i doesnt detect the phone and..pressing sleep/home button doesnt do anything

Update
I guess that it just had a bad connecting port on the phone itself, no clue why it wouldn't work when plugged in both ways other than there is actually some differentiating between the two sides.

K8MM-V 7142 updated vga bios

i have a couple of system using k8mm-v board which has VIA/S3 UnichromePro IGP, recently we have upgraded most monitor to 17"/19" Wide screeen LCD, here the problem come, the onboard vga bios does not support those wxga resolution like 1440x900 or 1650x1024, google around found this is related to vga bios issue, not driver. i have updated those system to ver 1A bios, vga bios seems remain the unchanged. is there any service/beta bios available to fix this problem? tq.

these are only low end sempron powered (tats the whole point for all-in-one board) office station which only do basic office documents/spreadsheets work & internet browsing, nothing more nothing less. pretty no point buying new display card for this. even a 5 years old 845g onboard display driving the wide screen lcd without any problem (their vga bios updated with driver though).

N560GTX-Ti OC problem after update VGA BIOS with Live Update 5 | SPLIT

Similar Messages

Maybe you are looking for