N560GTX-Ti Twin Frozr II/OC Driver Failure when using Firefox

I just bought this card a couple of days ago. Seems to run good with a minor exception that scares me a little. 3 or 4 times in the last 12 hours I have gotten a video driver error while using Firefox. It even happened once while posting this message...hate when that happens. The screen goes blank for a few seconds and then recovers...Says something like "Display driver stopped responding....recovered..." and it shows my driver version # in the message.
I am using the beta diver 290.36 and will switch back to the latest standard release tonight to see if it's something to do with the beta....but I don't think so...anybody? I'll let ya know how that goes.
I have a few questions:
1) I've read other posts with the same/similar error. One post said that a bios update "seemed to fix" it. Really??..a risky BIOS update to fix a DRIVER error...hmmm. I'll do it if I have to....but is it really necessary?
2) Where do I find the latest bios for my card?
3) What's up with Live Update 5....it doesn't do anything except for launch.
4) What's the safest way to flash the bios (USB Flasher?)
5) What are common idle and load temps for this card?
Rig specs:
Asus P8P67Pro B3 Rev
CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9
Cooler Master GX Series 650W
MSI N560GTX-Ti Twin Frozr II/OC
Windows 7 x64
TIA,
Cap

Well maybe it's driver or I don't know.
But for sure, that I know is this:
1. Was running W7 x32 with latest drivers (or if newer appeared last 1-2 days, I was using former), there was no driver recovery.
2. Now running W7 x64 with 275.33, because latest(as said above), gave me that recovery problem.
3. My friend uses some ASUS GT430(or GTX), also on W7 x64 with latest, also gives him recovery. 275.33 gave him none.
That is why I suspect on drivers when go sudden downclock (adaptive mode in nV CP). As I've noticed from GTX 560 Ti HWK(non-oc model), that clock from 822(850 I oc'd a bit) suddenly go to 50. Memory also, but forgot to how much.
Maybe this sudden downclock (less voltage/amp drain) triggers something in windows (the famous...forgot wat is called - also on Vista) that crashes driver. Or BSOD if that "Windows feature" is disabled.

Similar Messages

New Bios Request For N560GTX-Ti TF II (Artifact and PC Hang when using firefox)

I encountered the problem 3 times for the past three days as I was forced to do a hard reset.
I am surfing flash videos on firefox and suddenly the screen go green, purple and red flickering 'dots and strips', the mouse cursor stay alive for a second, then it stops, i cant do anything except a hard reset.
Display driver : ForceWare 296.10
BIOS : 70.24.0A.00.00 (P1040-0050)
s/n: 602-V238-16SB1101057250
Device ID 1200
Sub vender ID 1462
Sub System ID 2382
880 MHz Core
1024MB GDDR5 4200MHz Memory
Win7 x64
my bios: http://www.mediafire.com/?bi5hu0as2ymr9th
Intel i7-2600
Asus P8P67 LE
2gb Kingston memory X 2
Cooler Master Extreme Power Plus 500W
can Svet get me the new bios?
thanks!

Quote from: magicarshavin on 28-March-12, 06:15:26
After updating to the latest bios 201, the mouse movement feels sluggish, can i revert back using my backup bios GF114.bin (GpuZ) ?
Is it using the same command nvflash.exe -4 -5 -6 GF114.bin in USB boot dos will do?
Thanks.
Yes, that's right.
But the mouse movement feels sluggish is probably caused by something else rathar that vbios.
I suggest you to preinstall VGA drivers.
Remove current one 1st in Safe Mode with >>Driver Sweeper<< before install the new VGA drivers

N560GTX-Ti Twin Frozr II/OC freezes and got a nVidia driver recover

Greetings from Taiwan, issue here, just bought it a week ago, N560GTX-Ti Twin Frozr II/OC freezes and get a lot of glitches, had a black screen and nVidia driver failed during watching a movie or youtube, s/n is as below:
602-V238-16SB1101160284
(Idle)
Core Clock: 880MHz
Shader Clock: 1760Mhz
Memory Clock: 2100MHz
Fan Speed: 40%
# CPU brand: Intel Q6700 2.6GHz OC 3.4GHz
# Motherboard model: ASUS P5K3-Deluxe
# Memory brand: GSkill DDR-3 1333 2G*2
# Video card brand: N560GTX-Ti Twin Frozr II/OC
# Hard drive(s): Seagate 1TB * 3 SATAII-7200RPM
# Sound Card: Creative Fata1ity Platium Pro PCI-E version
# Operating system and version: Windows 7 SP1 64bit
# Power Supply Unit brand and output in watts and DC output: Seven-Team 750W

@drugstocowboy
Do not hijack other people topics! >>Please read and comply with the Forum Rules.<<
Read >>Posting Guide<< then open new own topic.

Driver for N560GTX-448 Twin Frozr III Power Edition/OC -l- split

I bought the card about four weeks ago and just now I had the opportunity to test it.
When I installed the video card in my PC, the device manager appears only a standard VGA video card. When I installed the driver, Device Manager showed a yellow exclamation on Nvidia's GeForce GTX 560 Ti saying "Windows has stopped this device becouse encounter some problems (error 43). I tried running some games but I could not open them, and with some drivers the screen was filled with artifacts
I tried various drivers on my two PCs, from one that comes with the video card to the 295.73 driver, and each time the same warning on device manager. Can anyone help solve this or may I do a RMA to MSI?
My systems:
AMD A3500
Gigabyte A75M-D2H
4Gb RAM Kingston DDR3
SevenTeam 550W.
Intel Core2Quad 9400
Gigabyte EP43-DS3L
8Gb RAM Corsair
SevenTeam 750W
Thank you.

Quote from: Bernhard on 20-March-12, 00:42:10
You sure your PSU has enough amps on the 12V rail and you connected the PCIE power connectors properly ?
Have you checked your Motherboard's BIOS revisions for updates regarding the later video cards ?
Your PCIE Bus interface should be 2.0 X 16. Have you reseated the card properly and disabled the on board graphics in your BIOS ?
My PSU is a SevenTeam 750ZAF with 750W. I used it to do SLI of my 9800GTX+ in the other computer and never had problems with it. I doubt that this could be my problem.
The GA-EP43-DS3L already has the ultimate BIOS and I did the update on the GA-A75M-D2H BIOS. Nothing new, the problem persist.
Anyone of my boards does not support PCI-Express 2.0 but this is not a requisites for work of the video board like said the MSI page:
http://www.msi.com/product/vga/N560GTX-448-Twin-Frozr-III-Power-Edition-OC.html#?div=Feature
"PCI Express 2.0 doubles the bandwidth of previous generations of PCI express up to an astonishing 16Gb/s. This maximizes the performance of current graphics cards in today's most demanding games and applications. PCI Express 2.0 products are fully compatible with mainboards with other versions of PCI Express."

MSI N560GTX-Ti Twin Frozr II/OC: Graphical Glitches/Corruption

Hello, I bought and installed an MSI N560GTX-Ti Twin Frozr II/OC video card one week ago. For the last week, it has been running perfectly, but today when I started up a game the 3D graphics began glitching and showing random stretched triangles and distorted models. While the 3D graphics are running, the monitor randomly loses signal from the video card and occasionally the program will crash with a popup bubble stating that the NVIDIA driver has recovered from a problem.
After reading through some posts here, I downloaded the MSI Afterburner program, enabled voltage monitoring, and set everything to defaults.
The defaults are:
Core Voltage: 1000 mV
Core Clock : 880 MHz
Shader Clock : 1760 MHz
Memory Clock : 2100 MHz
When I click the button to run a Kombuster stability test, the 3D has the same graphical glitches that I saw in my games. Here is a screenshot:
http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_880.jpg
I tried lowering the Core Clock speed and retrying the test. It appears that the level of corruption is proportional to the clock speed. At the minimum clock speed of 440 MHz, the graphics are almost perfect, however a glitch or two will still occasionally show up.
Here is the test at Core Clock = 705 MHz: http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_705.jpg
and at 440 MHz: http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_440.jpg
- I've tried bumping up the Core Voltage a little to around 1020 mV, but it doesn't seem to have any effect.
- Lowering the Memory Clock also reduces glitches, but they never go away completely.
- Even at the absolute minimum clock settings, my games still glitch and crash.
- I do not have access to another system that I can try the video card in.
System Info
CPU: Intel Core 2 Quad Q9450 2.66GHz
MoBo: Abit IP35 Pro - LGA775, Intel P35, FSB1333
RAM: G.Skill 4x2GB DDR2 800 (PC2 6400) Dual Channel (Total: 8GB)
Video Card: MSI N560GTX-Ti Twin Frozr II/OC
Video S/N: 602-V238-130B1103126135
Video BIOS: 70.24.11.00.00
NVIDIA Driver: 266.66
Hard Disks: 2x 640GB Western Digital WD6401AALS
OS: Windows 7 Ultimate 64-bit
Power Supply:
OCZ GameXStream OCZ700GXSSLI 700W
+3.3@36A,+5V@30A,+12V1@18A,+12V2@18A,+12V3@18A,+12V4@18A,[email protected],[email protected]
As I type this I'm starting to get corruption right on my desktop too, with random pixels changing color and black rectangles appearing on applications.
From what I've read in other threads, it seems like my power supply may not be sufficient since it has multiple 12V rails, but before I spend ~$100 on a new one I thought I'd see if anyone had any other thoughts.

Quote from: MP64 on 22-April-11, 03:46:20
I have an interesting update on my original problem.
A week after I reseated the card, the graphical glitches returned. I turned the computer off, reseated the card again, turned it on, and it began working fine.
Another week goes by with no problems, and then a couple days ago the glitches came back. Thinking it strange that the card could somehow take approximately the same amount of time to cause the same kind of bad connection, I wondered if there was something else that was causing the glitches to temporarily disappear.
I tried rebooting my computer, but the glitches remained.
I then completely turned off my computer and pulled out the power cord and left it for a couple minutes. I didn't open the case at all and made sure not to do anything that would bump any components. I turned the computer back on - glitches are gone once again.
So, it would seem that it may in fact have something to do with the power supply and not any bad connections with the card itself - at least, that's the best guess I have at the moment. I leave my computer on 24/7 so it seems like it doesn't like being left on for an entire week with this new video card installed.
Does this sound sensible? Is it possible for a power supply to slowly fail over several days, only to start working again after being powered down for a couple minutes?
Did you ever figure your issue out? I have the exact same issue. My system runs fine for almost a week...and then my desktop starts artifacting. The only way it goes away is to unplug my pc (or flip the switch on PSU). Then it runs again perfectly for nearly a week again and I start getting artifacts and the message stating that the graphics driver has stopped working and then recovered.
I also run my pc 24/7 and this problem is getting very annoying! My PSU shouldn't be a problem as I have the PC & Cooling 750W...
Oh...almost forgot. I've seen the same issue on 2 video cards now. RMA'd the first one and the second one does the exact same thing...

Do I need another RMA? N560GTX Ti Twin Frozr II/OC

Hey folks. Hi Svet.
Question: So, uh, is there something wrong with 560 GTX Ti based cards?!
I bought the card in February. It went flaky and was RMA'd in June.
Thread here: https://forum-en.msi.com/index.php?topic=149374.msg1109239#msg1109239
They sent me someone elses' repaired card, or a new card, but it hasn't lasted even 5 months of near zero use! I put in the replacement, and it seemed to work fine; ran all benchmarks and tests when I first installed it. And never gave it another thought.
I haven't had much need for 3D or gaming, I certainly haven't had time to game all summer. I mostly web browse and photo edit, and for that it's working fine. I'm mostly in linux and the only OpenGL work I do is rendering/modelling in Blender. In case you don't know, consumer 3D like 3D Vision doesn't work under linux.
Fast forward to today. Some family were over, the kids wanted to play with the cool 3D glasses, so I fire up Win7x64 and an OLD game (TOB: HL2 & Portal) and it looks horrible!
The white "fire flies" are everywhere, it looks kind of like a sports stadium filled with camera flashes going off. The textures are not only tearing, but the colors are freaky (mostly primary colors - white, magenta, blue) and tons of flickering. The textures are flickering individually. 3D or non-3D it's the same. You can still play, but of course you can't see. And eventually, it locks, and you have to reboot.
Trying to run Kombustor at just 1280x720 results in garbled video and finally the app crashes or hangs. The "furry" text is all interconnected, like there's extra faces or something.
The card has never been overclocked (beyond factory OC)... 880/1760/2100 MHz. Re: temps, in 2D it's always around 34C (and it never gets over 54C before crashing.)
The system is stable and runs just fine, until you throw something graphically-intensive at it, like gaming. Then the card goes boom.
This is with the 285.62 driver, I've also tried the 280.26 from the MSI site with the same results.
I'm pretty sure this is a hardware issue, the reason I'm posting before RMAing is, what should I do here? I do NOT want to RMA this thing just to have it die again. I want a stable system, period. The card should last indefinitely, at least until it's so old no one would bother using it! And with solid caps replacing that first-to-fail point of electrolytics, this should be easily attainable! I know MSI won't ever say if there's a design flaw with the chip nor the card, but you guys are another story. Could I, for example, get an RMA unit and then flash it so it will be a slower, ordinary 560GTX? Obviously I could, what I mean is, would this make the card survive longer? I'll take stable over speed any day of the week.
As you can imagine, I'm frustrated. And POOR, which makes matters worse - I can't swap it out even if I wanted to.
Well, thanks for reading. Any help appreciated.
System
Mob: MSI P67A-GD65 (B3) BIOS 1.F0
CPU: 2600 Non-K (no overclocking)
Vid: MSI N560GTX Ti Twin Frozr II/OC BIOS 70.24.11.00.00, add. power from separate 18A rails.
RAM: 4x 4G CORSAIR Vengeance PC3-12800 (XMP 1600), 8-8-8-24
PSU: Sparkle SCC-850AF +3.3~24A /+5V~30A /+12V: 16A/16A/18A/18A/18A ~86A total
OS : Win7Pro SP1 x64 w/ 285.62 / linux x86_64 w/ 290.10
Drives:
OS: 2x RAID0 OCZ Vertex2 240G
Data: 5x Hitachi 2TB array on LSI MegaRAID SAS MR9240-8i
Optical: 2x BD-RE DL (Sony Optiarc 5730S & LiteOn iHBS212)
UPS:
Tripp-Lite Smart Pro 2.6KVA
(not that a UPS matters, just making the point that it's always fed nice, clean power.)

Thanks, I've fixed it up.
I've tried to update the bios cux since a few days, the vga doesn't keep 60 fps in game when recording with fraps. Sometimes it goes to 55 and then it is hard to play. The game is NFS Hot Pursuit 2010 and up to now I could play it while recording at 60fps fix.
I use AB profile overclocked to 938 (core) and 2205 (memory) with voltage at 1.012

BIOS request for 2×MSI N560GTX-Ti Twin Frozr II/OC V238-059R

Dear sir or madam,
Please provide me the BIOS for the MSI N560GTX-Ti Twin Frozr II/OC V238-059R. I have two of them. My system now sees them as NVIDIA GeForce GTX560 Ti (no OC). I can't update drivers anymore.
The serial numbers are:
S/N:602-V238-35SB1201030210
S/N:602-V238-35SB1201030151
The NVFlash output is:
NVIDIA Firmware Update Utility (Version 5.190)
Simplified Version For OEM Only
BIOS Versions of NVIDIA display adapters present in system:
<0> GeForce GTX 560 Ti (10DE,1200,1462,2382) --:NRM 70.24.2E.00.02
<1> GeForce GTX 560 Ti (10DE,1200,1462,2382) --:NRM 70.24.2E.00.02
Thank you in advance!
Sebastiaan Smit

latest vbios version attached below
Quote
I have two of them. My system now sees them as NVIDIA GeForce GTX560 Ti (no OC).
there is no OC driver, it just detect the name.
this is not issue

MSI N560GTX-Ti Twin Frozr II/OC and TRUST PSU 570W

I want to buy the MSI N560GTX-Ti Twin Frozr II/OC and I have the TRUST PSU 570W. It has two rails having +12V with 16A and 192W each. Also I have two SATA2 HDD and five 120mm fans. Do you think there is enouph power supply for the GPU to run smoothly or do I have to buy a better PSU and what do you suggest?
Thanks.

I have the following system configuration:
Intel Core 2 Duo E8400, Windows 7/SP1 64 bit
Kingstone Hyper-X Dual Channel 2x2GB 800Mhz
TRUST PSU 570W
Gigabyte X38-DQ6
WD Caviar Black 1 TB SATA Hard Drive (WD1002FAEX)
WD Caviar Black 320 GB SATA Hard Drive (WD3200KS)
LG DVD/CD R-W w/LightScribe combo drive
The MSI N560GTX-Ti have two power connectors, the Corsair VX550 you suggested it has two rails of +12V and 41Amps each?
I was looking for the Corsair CX600 V2 Power Supply (CMPSU-600CXV2) is it better than VX550?

N560GTX Ti Twin Frozr II artifacting and crashing issues.

I have been fighting with these cards since I bought them. The will crash the driver lockup the machine or artifact in games. I have tried to increase the voltage leave them underclocked. I am at a loss on what i should do next. Any help would be appreciated.
S/N 602-V238-130B1103221587
S/N 602-V238-130B1103266752
Display device : MSI N560GTX Ti Twin Frozr II on GF114 GPU
Display driver : ForceWare 306.97
BIOS : 70.24.11.00.00
GUID : VEN_10DE&DEV_1200&SUBSYS_23821462&REV_A1&BUS_1&DEV_0&FN_0
Multi-GPU role : master
GPU2
Display device : MSI N560GTX Ti Twin Frozr II on GF114 GPU
Display driver : ForceWare 306.97
BIOS : 70.24.11.00.00
GUID : VEN_10DE&DEV_1200&SUBSYS_23821462&REV_A1&BUS_2&DEV_0&FN_0
Multi-GPU role : synchronized with master

Board: MSI LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard P67A-GD80 (B3)
Bios: A.50
VGA: N560GTX Ti Twin Frozr II SLI
PSU: Antec High Current Gamer HCG-900, 80 PLUS BRONZE, 900 Watt Power Supply 40A Rail
PROC: Intel Core i7 Processor i7-2600K 3.4GHz 8MB LGA1155 CPU BX80623I72600K
MEM: Corsair Memory Vengeance 16 Quad Channel Kit DDR3 1600 MHz (PC3 12800) 240-Pin DDR3 SDRAM CMZ16GX3M4A1600C9
HDD: OCZ Technology 120 GB Agility 3 SSD- 3G SATA 6.0 Gb-s 2.5-Inch Solid State Drive AGT3-25SAT3-120G
OS: Windows 7 64bit Professional

GOP / UEFI Vbios request N560GTX-Ti Twin Frozr II/OC

Hi! I have this card > msi.com/product/vga/N560GTX-Ti-Twin-Frozr-II-OC.html
S/N: 602-V238-17SB1102192137
BIOS > fileshare.ro/e30001625
Please give me latest bios uefi and non-uefi. And please tell me what are the advantages of uefi bios, what's new?
I am also having problems with nvidia drivers, any newer driver than 314.22 (latest stable for my card) would make my system hang, freeze, etc. The problem is debated on nvidia forums > forums.geforce.com/default/topic/621899/geforce-drivers/desktop-internet-browser-freeze-or-tdr-thread-w-geforce-460-560-gpus-updated-10-29-13-see-page-17-/
Would a bios update fix this problems with drivers?
Thank you!

Ok, thanks Svet! But for the problem with drivers what do you think?
It's annoying because i can't play Battlefield 4 because i have an outdated driver, and many new games that are optimized in new drivers, i can't benefit for that extra fps.
Maybe if some big company like Msi would talk to nvidia they will listen and repair the bugs. I know gtx 560 ti is old, but for me is enough and i don't want to change my card because they can't make a good driver.
I have no overclock on the card, everything is stock.
Thanks!
Quote from: stargate20 on 18-November-13, 18:14:14
I am also having problems with nvidia drivers, any newer driver than 314.22 (latest stable for my card) would make my system hang, freeze, etc. The problem is debated on nvidia forums > forums.geforce.com/default/topic/621899/geforce-drivers/desktop-internet-browser-freeze-or-tdr-thread-w-geforce-460-560-gpus-updated-10-29-13-see-page-17-/

Requesting New BIOS for N560GTX-Ti Twin Frozr II

Hello, forgive me if i'm a bit slow, but this stuff is all a bit new to me. I've read that a lot of crash issues with this card (the ones i seem to be having) are video BIOS related?
So I figured I'd give this a try.
Card Serial Number: 602 - V238 - 370B1203014155
GPUZ info:
My current BIOS i have a mediafire link, but it wont allow me to post it, if you have another way for me to do so I'll get right on it.
EDIT: nvm i found it here when i tried to upload it from GPUZ: http: //www.techpowerup.com/vgabios/120003/msi-gtx560ti-1024-120222.html
Thank you in advance for any assistance

Quote from: Svet on 28-April-14, 20:51:46
how do you know that's your vbios?
opposite. in very rare cases the vbios can help with such.
is this a new card? or used one? if yes does it worked before?
what are your computer specifications? list full PC specifications , see >>Posting Guide<<
I only mention that i thought it was a vbios thing because i read a thread that had multiple people having problems with the same card (although it really does seem to have problems with the nvidia drivers). I have tried all number of different freshly installed driver versions, but to no avail.
I know its my vbios because when i tried to upload it to the GPUZ database it said it already existed and gave me that exact name.
the card was new when i got it about a year ago, these problems have been occuring since then (mostly with the driver updates) and I've permitted it up till now, I'm sick of my pc rebooting and getting no video output.
System specs:
Board: Gigabyte Z77-D3H
Bios:1.0
VGA: N560GTX Ti Twin Frozr II 1024
PSU: (this info will come later when i have time to check)
CPU: Intel Core i5-3570k @3.40GHz 3.80Ghz
MEM: Corsair (s/n 25855899) 2x4G CMz8GX3M2A1600C9
HDD: ST500DM002-1BD142 ATA
OS: Win 7 x64 Ultimate

N560GTX - Ti Twin Frozr II 2GD5

Just got a N560GTX - Ti Twin Frozr II 2GD5 for a custom computer.
When everything was plugged in and ready to go, I turned the computer on and everything seemed normal. However, a few seconds after the BIOS screen popped up the monitor went black.
I turned it off, then turned it back on, the screen just stays black.
The light on the power button to my monitor usually goes green when there's something on the screen, and orange when it's idling. The light stays orange when I turn on the computer.
Does this mean I need to replace my videocard?

Sorry, here's some more information:
CPU - Intel i5-2400 3.1GHz
Motherboard - GIGABYTE GA-Z68XP-UD3 Intel motherboard
Memory - G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Videocard - MSI N560GTX-Ti Twin Frozr II 2GD5/OC GeForce GTX 560 Ti (Fermi) 2GB 256-bit GDDR5 PCI Express 2.0 x16
Hard Drive - Western Digital Caviar Blue WD5000AAKX 500GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive
Power Supply - CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Also, both power cables were plugged in.

MSI N560GTX-TI Twin Frozr II Whining?

Yeah when i started my first try on Warhammer 40k Retribution the card starts to give this high pitched squeal or whine out somewhere
The weird thing is that the noise changes when i put my cursor over texts in the game and the sound won't come out when i'm normally on windows?
So what is my workaround here? Should i just send the card back to the shop i bought it or what?
System specs
OS: Windows 7 64bit
CPU - i7-2600k @ 4000MHz
MEM - 2x2GB Corsair DDR3 XMP @ 1600 MHz
GPU - MSI N560GTX-TI Twin Frozr II/OC
MB - MSI Z86MA-G45 (B3)
PSU - Corsair GS 800
HDD1 - Corsair Force Series™ 3 60GB SATA 3 6Gb/s Solid-State Hard Drive
HDD2 - Western Digital's Caviar Green SATA 3 6Gb/s 2TB 5400RPM 64 MB Buffer

Civilization 5 seems to work somewhat better -> Can't hear the voice and it has lasted longer without crashing to OS, but there is also vertical lines in the top area of the screen =/
UPDATE1 -> But the lines seem to have disapeared now that i have been ALT+Tabbing to Windows?
UPDATE2 -> The lines returned after the second time alt tabing
UPDATE3 -> In Mass Effect 2 i noticed the going through Resolution Settings the volume of the Pitch changed and by disabling Dynamic Shadows the weird pitch went away???
Uploaded with ImageShack.us
I highly doubt this is any power fault since GS 800 should give enough Amps:
Uploaded with ImageShack.us
Should i try to update that cards BIOS and take othe PCI-E connectors to the card?

[Request] GOP / UEFI Vbios: N560GTX-Ti Twin Frozr II

Hi,
It would be nice to have GOP / UEFI Vbios for my N560GTX-Ti Twin Frozr II
S/N: 602-V238-19SB1102197868
My VBios: dropbox.com/s/4s19x04gxgu2ym5/GF114.rom?dl=0
Thanks in advance!

5xx card series don't support UEFI

MSI N560GTX-Ti Twin Frozr II/OC bios

Hi can you check my vbios?
Model: N560GTX-Ti Twin Frozr II/OC
Vbios: https:// w w w.dropbox.com/s/v7nd8a7f0t0e1nt/GF114.rom
BIOS: 70.24.0a.00.00
s/n 602-v238-16sb1101058046
Can you also reduce the fan speed to the minimum of 30%?
Thanks a lot

thank you very much

N560GTX-Ti Twin Frozr II/OC Driver Failure when using Firefox

Similar Messages

Maybe you are looking for