N5800 XM V50 issues
Hello!
I've just update my 5800 XM and soon noticed some issues in the firmware.
I'll try to describe the best I can.
Positive Points:
Kinetic menus, improved speed, camera night quality improved, and Maps extremely fast and accurate.
Negative points:
Above all: the touchscreen sensibility decreased.
Rotation screen A little bit more slower
And Homescreen themes completely messed up
In this last point,
ShortCut Theme .
I cant set the shortcut theme like before, in the top part of screen just below clock and operator, bat and network info. When I Try to set it, just appears nothing but the wallpaper distorted, and the keyboard and contacts buttons just disappear. Whats left its a kind of tabs that simply dont work.
Operator Theme: doesnt even work
Contacts Theme: Similar to the shortcut theme problem, but in this case the phone and contact buttons become two tabs in the bottom of the screen, and the Shortcuts to apps appear also in screen bottom just above the keyboard and contact buttons, plus the email bar and add contact buttons are place right in the middle of the screen.
Basic theme: no worries, but honestly I dont even remember if anything's different cause I never used it.
does anyone try this, have anyone noticed? and there's any kind of solution for this?
Hope you help me.
best Regards, Stroumb
I would agreed wit h what Stroumb wrote and have the same thing happened to my n5800, even though i have tried soft and hard reset, take out the sd card, format sd card it is still doesn't help much and the "message eating". screen rotation problem still persist.
@jjegan,
do you mind letting me know what version / custom version exactly are you running on your n5800?
-I'm running on v50.0.005 / 50.0.005.C03.01
Are you running the same firmware code?
@chanchan05 ,
Appreciate you can share some information you may have on this as well.
Thanks.
Similar Messages
-
Hi,
I am using nokia 5235 mobile. While trying to update mobile software using nokia suite it is showing 12052 error.
while I am checking the mobile version using *#0000# .
It is showing the following details:
Software version : v50.9.002
Software version date 24-5-2011
custom version : 50.9.002.562.01
Custom version date 19-07-2011
Model : 5238 ---------------> I guess this is wrong.
Type : RM -588
Can anyone help me how to solve this issue.
Thanks,
Sha.Hello Sir,
Recently my mobile software is corrupted because I downloaded 2 anti virus at a time, so the mobile is not working properly.
I approached Nokia service center for update software, after 2 days they told that some problem is there with my mobile so they are not able to install the software and mobile is switched off.
Then I approached private mobile repair organization , they did something with in a 1 hour span and my mobile is working fine. After that I noticed that they have installed different version of the software,
Nokia service center people said that some mobile mother board is not working.
Is it true. Can I update my mobile to latest nokia 5235 software.
Thanks in advance,
Sha. -
5800 v50 - screen orientation change taking EIGHT ...
When using the keyboard to enter text, if I switch from vertical to horizonal it is taking up to 8 seconds for the change to occur
It seems that "upgrading" to v50 has been a complete waste of time.
The performance is far worse than any other update I have applied v2x,v3x
How can I stop this from happening?
Bizarrely, whenever I tried to do a firmware update from v3x, it said none were available.
I did a hard factory reset [red green camera], then suddenly I am allowed to update to v50
This is pretty poor behaviour.There are several possible reasons for this, possibly RAM issues for instance. Many people have reported varying things about v50, ranging from it stabilized the phone to slowing it down to the point that it needs a format of either phone, memory card, or both depending on the nature of the problem. One of the most possible causes are the previous applications and settings we had.
My first advice would be to try removing your memory card to see if the current behaviour still would continue. If it works better after removing the card and rebooting (and using without card), then the problem lies in the card.
If it doesnt, you may have to do a hard reset. A hard reset is advisable if you encounter problems after update since we have to take into account new settings data and features which the firmware adds that may come into conflict with old settings and apps.
If you find my post helpful please click the green star on the left under the avatar. Thanks. -
Server 2012 R2 VM packet loss issue
Hi all,Looking for opinions on a tricky issue. Working on a client job to add 2X Server 2012R2 VMs for DC and file server duty.Environment is as follows: 2 HP Proliant DL380p G8 hosts.
VMware vSphere 5.1 (Build and Update 5.1.0 build=build-1483097 (Update 2)Network adapters broadcom netXtreme BCM 5719. Driver Version: 3.135b.v50.1Both hosts are already running a mix for Windows 2003 and 2008 servers with general workloads like DCs, SQL, virtual applicances. they are having no issues with any of the current setup.However, the new 2012 R2 VMs I have added are experiencing packet loss. its random maybe every 5 minutes 3 or 4 packets are dropped and then the connection returns. A ping plotter trace over an hour will show red spikes dotted across it. Bare in mind these servers are of yet not doing anything, just been installed, patched. One...
This topic first appeared in the Spiceworks CommunityI have two clustered hosts running Server 2012 R2. I have a NAS setup with iSCSI targets that I'm using for storage. I would like to setup a second NAS and replicate my VM's to the second NAS in case my primary NAS device fails. Is there anyway
I can have Hyper-V or VMM perform the replication?
You cannot do that AS IS. You do Hyper-V Replica between Hyper-V hosts and not using same on-site hosts and remote storage. Making long story short: you'll need another Hyper-V outside of your current cluster and it can store data (VMs) anywhere (including
that extra NAS, make sure it's actually an iSCSI SAN capable as there are no low-end models that support SMB3 and Hyper-V cannot use NFS for VM hosting). See:
Automated Disaster Recovery with Hyper-V Replica
http://blogs.technet.com/b/keithmayer/archive/2012/10/05/automate-disaster-recovery-plan-with-windows-server-2012-hyper-v-replica-and-powershell-3-0.aspx
"Hyper-V Replica enables Hyper-V hosts or clusters to enable distance replication of running VMs to
remote Hyper-V hosts over a standard IP WAN connection."
Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
I just updated my firmware to v51 n already having helluva problems.
Firstly battery doesn't last for more than 6 hours on full charge(i used to get 3 days with v50 with similar usage)
Whenever i click on settings,phone hangs
Apart frm these,front camera quality is damn good now and diplay rotation is also fastYou can discuss firmware issues in the Software update section of this forum. What you describe is not normal. I updated to v51 via FOTA and the phone works flawlessly. I think that some background processes are draining your battery. My advice is to hard reset the phone.
-
After updation to v50 from nokia my menu animation...
i purchased nokia 5800XM 2months back .. i updated it from v40 to FW v50 ...
it was working fine ...but just 2 days back my battery became hot .. i was not calling or dong anything ...
then i went to nokia care .. they told me that it has virus which makes the battery hot !!
is it possible ??
then they said that there are issues with downloading it directly from internet ...
then they formatted and updated my mobile to v 50 ... but now there was many things changed ...there is no animation when i press the middle button to menu... it opens directly !!
moreover for dialing also no animation and for phone book entry also .. then i said this to nokia care but they said the animation is not there in v50...
plzzz help me out .. i liked that animation so much ...
is it because they might have deleted system files from my mobile !!! plzzz help !!
Love will Find a way ...
Solved!
Go to Solution.don't say sir. just call me as dude.
never mind. sorry mate i don't have any experiences about GPS system. but would like to give you some advices. you must go outside to use GPS. satellites will not detect indoor device. make sure that your not covered GPS receiver. see the attachment. it shows GPS internal area of the phone.
Glad to help
Attachments:
mapsgpsreceiver.jpg 100 KB -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani -
Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampathHi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath -
HP LaserJet Enterprise 600 M602 driver issue
Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
AnatolyI am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Windows 7 displays error message when exiting +cursor issue
Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Dougfunction(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel -
Issue in Creation of Periodicals for Contracts in CRM7.0
Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
DedeepyaHi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C -
Issue in creation of plant related data at receiving server using BD10
Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05 matmas05
E1MARAM Master material general data (MARA)
Z1KLART KLART----
My extention
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT)
E1MARCM Master material C segment (MARC)
Z1AUSPM E1AUSPMDistribution of Classification:----
My extention
E1MARC1 Additional Fields for E1MARCM
E1MARDM Master material warehouse/batch segment (MARD)
E1MFHMM Master material production resource/tool (MFHM)
E1MPGDM Master material product group
E1MPOPM Master material forecast parameter
E1MPRWM Master material forecast value
E1MVEGM Master material total consumption
E1MVEUM Master material unplanned consumption
E1MKALM Master material production version
E1MARMM Master material units of measure (MARM)
E1MBEWM Master material material valuation (MBEW)
E1MLGNM Master material material data per warehouse number (MLGN)
E1MVKEM Master material sales data (MVKE)
E1MLANM Master material tax classification (MLAN)
E1MTXHM Master material long text header
E1CUCFG CU: Configuration data
E1UPSLINK Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PMCREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ? -
Issue in Creation of new Value Field in CO-PA
Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
SafiThanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi -
Dear All
I have some is my current assignment-Customer is buying some material say "A" want "B,C" as exclusive free goods
is it possible to give two free at a time in same order ?
I only know one exlusive free good can be give to one material with combination of customer ( Customer/Material)
Looking for some inputs regarding the issue.
Can you plz suggest me if there is any possiblities for BOM?
Many Thanks
Rakesh NaveenDear Rakesh,
Be informed that free goods is not currently supported in combination with material structures (e.g. product selection,
bills of material, variants with BOM explosion), see note 796926.
Determination of free goods is performed in include FV45PF0N_NATRAB_SELECTION and the check is hardcoded. You will have to modify the program to get that functionality, but be carfull that any modification won't be supported by SAP, see note 170183.
I hope it can help you.
Ruy Castro
Maybe you are looking for
-
What is the use of dropdown box in wad in bi-7
what is the use of dropdown box in wad in bi-7
-
hi, I got a war and ear that share common classes. I would like to deploy both of them on the same application server. I started with weblogic and it worked fine. Now I am running it on Websphere - the problem is the ear application failed to start -
-
Can any one lpz explain me how to determine the tables for the segments/fields of a purchase order (Orders05) iDOC?
-
How do I undue the firefox "Remember me" for me E-mail passwords?
When it comes to logging in using your username and password, Firefox ask do you want firefox to remember your password, and if you say yes it always remembers your password. How do I tell firefox I do not want the little fox to remember my password
-
How to create a tool pane for apps in SharePoint using SharePoint hosted app model 2013..I mean i m looking for something like webpart propeties to be given to the user for selecting desired content.Can someone provide help code for this functionalit