N580GTX Lightning XE VBIOS Request

Could I please get both of the VBIOS', LN2 and Original, for both of my GPU's?
N580GTX Lightning XE GPU1 S/N: 602-V256-040B1108059258
N580GTX Lightning XE GPU2 S/N: 602-V256-040B1111021940
Thanks

we figure that vram mess for those cards are caused by vbios issue,
if you still has interest, let me know to provide 1st vbiosses where all 3GB VRAM are usable.

Similar Messages

UEFI/GOP Vbios Request: MSI N580GTX Lightning

Hello,
it was updated to Windows 8.1, please report as it is possible to receive the VBIOS updating for the video card of your production, with support of GOP and where to take tools for the VBIOS updating.
Model: N580GTX Lightning
S/N: 602-V256-02SB1105035776
BIOS Version Graphic Card: 70.10.17.00.06

There is no GOP vbios for any Fermi based GeForce vga (no matter what manufacturer). Only for Kepler based GeForce GTX6xx vgas and newer models are GOP compliant vbios versions available. There is no way for UEFI booting with a GTX5xx or older.

N580gtx lightning xe/std - why?

Question to the MSI.
I bought a video card "MSI n580gtx lightning xtreme", but it is not the declared default frequencies 832/4200 - it is the frequencies 772/4008 and is listed on the label "MSI n580gtx lightning xe /std"(!!!). What is this, some kind of a product which is not mentioned in the official sources? That is, buy a sports car, but that's just the engine it will have on the sports bike, and for almost the same money? This card is not held for some parameters in a class "832/4200" and was demoted to a "standard class - STD"? Explain please, preferably with competence, and not based on speculation - I have enough of their own!
Thank you.

Quote from: viiv
Well ... Your response is predictable. On the other hand assiduous avoidance of the answer to this question shows that there is an unofficial selection. And the buyer should not rely on the exceptional opportunities card N580 GTX LIGHTNING EXTREME (XE / STD!!!). Most harm the brand image that you are trying to fog to hide the reason - you can lose consumer confidence, and he votes with money.
This is a Users-to-Users Forum and your last post is considered being more than just inpolite. It's the reseller who sold the card and he's the one to contact. You may also contact MSI and complain:>>How to contact MSI.<< but stop this attitude on this forum.

APS for MSI N580GTX Lightning

Please help me with APS utility! How to make it to turn the Auto PWM Switch on automatically when it launches?
I'm just sick and tired of turning this PWM Switch on by my self every time OS starts.

Ask msi here: http://support.msi.com
as i'm not familiar with this tool and his function.[don't have N580GTX Lightning card to run the tool either]

N580GTX Lightning Xtreme Edition Stock & LN2 BIOS

Could someone with a N580GTX Lightning Xtreme Edition GPU please post or share both the Stock Original BIOS and LN2 BIOS files? I think that the Stock Original BIOS on my card is corrupt because after formatting my system and installing the GeForce drivers, my monitor shuts off after the Windows 7 boot screen. But when I switch to the LN2 BIOS, my system starts up normally.
I want to try using nVFlash and flash over the Stock Original BIOS with a non-corrupted version and see if that'll solve my issue.

Quote
ould it be possible that MSI didn't replace my video cards, and simply stuck on a different serial number sticker on them?
No
Quote
Because the replaced one's that I received do the exact same thing as the one's I sent in the first place.
Sound logical if the problem is not in the video card.
2 video cards to broke in the same time is highly unlikely, even replaced card is still doing the same,
its one more conformation that its not the video card

Recently RMA'ed N580GTX Lightning XE

When I recently RMA'ed both of my N580GTX Lightning XE video cards, I realized that one of them had the stock 772/4008MHz for AUS Only and the other one had the original 832/4200MHz clocks. When I tried to flash the AUS Only N580GTX Lightning XE with the BIOS from the original one with nVFlash, I got an error indicating a PCI Subsystem ID Mismatch. Which in this case, I can't run both of my N580GTX Lightning XE's in SLI. Because the SLI Configuration option is not available on the nVidia Control Panel at all. Why would MSI send me a totally incompatible N580GTX Lightning XE with the other one?

Quote from: Svet on 27-September-12, 07:10:53
Reinstall VGA drivers.
Remove current VGA drivers in Safe Mode with >>Driver Fusion<<,
then boot to normal mode and install MSI VGA drivers:
http://www.msi.com/product/vga/N580GTX-Lightning-Xtreme-Edition.html#/?div=Driver&os=All
then retest
I just tried that. Uninstalled VGA drivers in Safe Mode, rebooted back into Safe Mode, used Driver Fusion to remove any remnants of VGA drivers, rebooted and re-installed VGA drivers v301.42 from the link you provided. But the SLI configuration option is still not visible in the nVidia Control Panel. :(

N580GTX Lightning coming out?

I'm just wondering. Is there an N580GTX Lightning coming out anytime soon? I like the N480GTX Lightning but I really want to see what the GTX 580 would be with all of the stuff the N480GTX Lightning has.

I think there's no need to contact tech support for that cause of a high possibility that N580GTX Lightning will be released later on Q1 2011, Just count the time span based on their N480GTX Lightning, when was the time gtx 480 was released and the time when N480GTX Lightning is released, GTX 480 lets say mar. 25 & later on N480GTX Lightning released sept. 13, then that's 6 months time before the N580GTX Lightning will be done based on their gtx 480 lightning, if GTX 580 was released this November 2010 then N580GTX Lightning will be released May 2011
I myself registered in MSI forums just to know if there will be an early release of N580GTX Lightning cause I'll be buying their N480GTX Lightning this Dec hoping they'll cut the price because of gtx 580 launch, I mean I LOVE their "military class" components! I hope they improve their cooling in N580GTX Lightning like Arctic Cooling Xtreme Plus for GTX 580

N580GTX Lightning "Tweaker" utility?

Hi, I'm wondering where I can download the "Tweaker" app (with PWM control) for my N580GTX Lightning? I just checked the CD that came with the card and it's not on there (only driver and afterburner).
For that matter, how do I find out if there are any new BIOS for the Lightning?

Yes, that's the one; it's called "Tweaker" when the app is run (simply says "LIGHTNING TWEAKER" at the top). I had been using it *with* Afterburner voltage control at the same time for the last several days...
Don't need it now I guess, but glad to see the download section for this great card is finally up.

N770 TF 2GD5 VBIOS request

VBIOS request for two cards
S/N: 602-V282-20SB1305091602
S/N: 602-V282-20SB1307057656
both have same VBIOS
Code: [Select]
NVIDIA Firmware Update Utility (Version 5.141)
BIOS Versions of NVIDIA display adapters present in system:
<0> GeForce GTX 770 (10DE,1184,1462,2825) --:NRM 80.04.C3.00.1F
<1> GeForce GTX 770 (10DE,1184,1462,2825) --:NRM 80.04.C3.00.1F

Thank you.

VBIOS request R9 270X

VBIOS request for MS R9 270X 4G TWIN FROZR Edition
Serial: 602-v303-09sb1402066147
windows screenshot

https://www.mediafire.com/?3i44aciz9agqvnz for bios

Recently RMA'ed N580GTX Lightning XE GPU's

I recently just RMA'ed both of my N580GTX Lightning XE GPU's because I wasn't able to enable SLI. The nVidia Control Panel kept notifying me that the SLI connector is missing, but it was installed a fully seated properly along with both pairs of 8-pin PCI-E power cables and I also tried both pairs of SLI bridges that originally came with my GPU's. I just received both of the replacements and the nVidia Control Panel is still giving me the same message.

Almost impossible to have the same problem with that many vgas. Either something is done wrong or another component but the GTX580s is faulty. Tried another bridge?

Need help overclock the MSI N580GTX Lightning Xtreme Edition !

I want to overclock this card MSI N580GTX Lightning Xtreme Edition (MSI N580GTX Lightning Xtreme Edition GeForce GTX 580 (Fermi) 3072 MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card), but I don't know how far I can get. Can you help me overclock this to get a maximum performing? and how can I do that? can you guide me?
what is temperature should be consider over heat and might damage card?
After overclock, can I keep that always in 3-5 days without shutdown computer?
Here is default Corelock 832, Shaderlock: 1664, memory clock 2100
Also, when I click the "K" to show MSI Kombustor: I see Core: 416, and GPU Throttling -416Mhz. What is happening? is that graphic card has problem? it doesn't run fully 832mhz.
Here is information of my computer:
Motherboard   Asus Maximus IV Extreme-Z
Processor   Intel Core i7 2600K
Memory   Corsair Dominator Platinum 32GB (4x8GB) DDR3 1866 MHz (PC3 15000)
Video Card # 1   MSI N580GTX Lightning Xtreme Edition GeForce GTX 580 3072 MB
Hard Drive # 1   Corsair Force Series GT 120 GB
Hard Drive # 2   Western Digital Caviar Black 1 TB
Power Supply   Corsair HX1050W
Case   Corsair Graphite Series 600T
Monitor   Acer HN274H BMIIID 3D 27-Inch LED Monitor - Black
Operating System   Windows 7 Utimate (64 bit)

Quote from: flobelix on 02-December-12, 01:03:03
Playing aan entire level of Crysis or Crysis2 with extreme settings is a very sure way to test. A multiplayer round of BF3 at max settings is also a good test.
If you got the max stable clockrates without overvolting and temps are fine. Go on adding voltage in small steps and agin try the highest max clockrate of any voltage step. That way you'll find the total max clockrate. At some point adding voltage will have no effect anymore and that is the highest clockrate. Remember that voltage unlike just higher clockrates will increase the temps massively.
Agreed with flobelix
Crysis 2 with ultra setting and set Vsync to Disabled is a very hard test in real life application, I don't use furmark or kombustor. To test stability first I run Vantage and 3DMark2011 then playing Crysis 2 about 2 - 3 hours every day for aweek or 2 weeks and if pass then I call it stable
I use GTX580 Lightning and at stock volt I can do 920/2200 with all little DIP switches turned ON/Enabled/Unlocked excluding Xtreme cooling LN2 DIP switch since I use normal air cooling and not LN2. If I let all DIP switches to their stock/OFF even at 900MHz I can't pass Vantage.
For safe daily OC better stay under 80c for your core temp and under 70c for your VRM & Memory temp also do not use beyond +200mv for your core voltage (+200mv is the max value)
Note : For 24/7 I use 980/2300 with +112mv/+40mv. VRM and memory temp are under 60c and Core temp is under 80c.

N580GTX Lightning Extreme running too hot?

I have had this GPU since Nov,2011. It really is a great card. Lately though I have been having some strange problems. Just last night during a 3 hour session of BF3 my screen just went black on me. No BSOD or anything, just black. Like there was no video being output to the monitor. The system was still running. All the fans(CPU cooler and 8 case fans). I have an Antec 1200 case so airflow is not an issue. I tried to push the reset switch on the front panel, but that did nothing. Holding down the power button did nothing as well. I had to actually turn my PSU off to get the system to shut off. I waited a few min and turned it back on and my PC booted up just fine (other than the expected warning saying the system was not shutdown properly). I am using the same PC to type this post. This is the 3rd time same exact problem has happened. At first I thought it was my PSU. I have a Corsair HX750 Pro Series. This PSU should be sufficient right? The box for the GPU says minimum 700W or greater with a 12v current amp rating of 42Amps. This PSU has a 12v current amp rating of 62amps. Is my GPU overheating or something? I have the MSI Afterburner running right now, and at idle, the temp of the GPU is 50. Shouldn't it be lower than that at idle?? Also another thing I just noticed is the LED's on the PCB for the voltages are showing all green and red. Isn't it supposed to be all green when on idle or running day to day tasks? I am running the latest Nvidia drivers that were released the other day (301.42). If anyone has any clue as to why this is happening, I would really appreciate any feedback. I beginning to worry that my beast of a card is dying on me!!
Oh btw...I am not overclocking this card at all. The only thing I adjust in afterburner is the fan speed. I keep it at 100% during gaming and the temps stay at 65. I have overclocked it before (when I first started using it), but not by much. I didn't really see any difference so I just left it at stock.
SPECS
MSI 890FX-GD65 MOBO
MSI N580GTX LIGHTNING EXTREME
AMD PHENOM II 945 QUAD CORE 3.0GHZ
8GB DDR3 RAM (4X2GB DIMMS)
CORSAIR FORCE SERIES 3 SSD 120GB
CORSAIR HX750 PRO SERIES PSU(MODULAR)
7X120MM FANS
1X200MM FAN
1 ZALMAN CNPS12X ULTRA QUIET CPU COOLER
2X1TB 7200 HDD'S
1XLITE ON DVD-RW

Quote from: Svet on 25-May-12, 15:28:37
if you use another video card does it works stable?
So this issue is recently introduced?
Can you test the VGA in another computer to isolate the issue?
At thsi point it coulbd anything, CPU overheating, PSU problems and so on
It seems to be a BF3 related issue. I tested the GPU with furmark and everything seemed fine. Also played Crysis 2 and it ran good as well. It never crashed out. I also moved my case to the floor under my desk. I have wooden floors so no worry about ESD. The idle temps dropped to 41C. When it used to be 50C. I was thinking about disassembling the card and applying some arctic silver to the heat sink. Is this an easy process? I work on computers at work all the time, changing out heat sinks on CPU's all the time. I have never performed this on a GPU though. This is a very expensive card and I don't want to damage it. Is there a guide that you can point me to for this specific card? Will it void my warranty if I do this? Thanks again for your help!

GOP / UEFI Vbios request for R9 270X GAMING 2G

GOP / UEFI Vbios request for R9 270X GAMING 2G
My vbios is here-- "www. techpowerup .com/vgabios/146850/msi-r9270x-2048-131007.html"
version:015.040.000.000.002887
Thanks!

Quote from: zx1239856 on 19-October-13, 11:19:36
GOP / UEFI Vbios request for R9 270X GAMING 2G
My vbios is here-- "www. techpowerup .com/vgabios/146850/msi-r9270x-2048-131007.html"
version:015.040.000.000.002887
Thanks!
h**p://www.techpowerup.com/vgabios/146850/msi-r9270x-2048-131007.html is the bios from techpowerup
my bios--------- h**p://www.rayfile.com/files/b4588742-3896-11e3-b688-0015c55db73d

MSI N580GTX Lightning Extreme Edition (Black Screen / Reboot)

Hi everyone !
Here's my computer specs :
CPU: Intel I7 870 (2.93 Ghz)
MoBo: Micro ATX from my Dell XPS Studio 8000
Memory: 6Go DDR 667 Mhz
PSU: Corsair HX750(w)
Windows 7 Pro 64 Bits
My problem :
80% of my games (Crysis 1 & 2, Bulletstorm,...) & benchs (3DMark 11, MSI Kombustor, ...) crashes after few seconds. My graphic card goes off, black screen, and then my computer automatically reboot. I've tried another PSU, same pb, and my Corsair HX750 is new. So I wonder if the problem is from my graphics card or my (dell) motherboard ? But my config has the minimum required by MSI.
My temporary solution
After few tests with differents drivers, I've try to change the Core Voltage, no result... So I decided to downclock the GPU freqs.
In order to have something stable to 100%, and be able to run all the games and benchs, i've to downclock the GPU like :
Core Clock : 600 Mhz (Original : 772 Mhz)
Shader Clock : 1200 Mhz (Original : 1544 Mhz)
Memory Clock : 1730 Mhz (Original : 2004 Mhz)
Its a big loss frequency!
Hope a new bios will come out to fix the bug.

Quote
Display driver : ForceWare 280.26
have you tried MSI's drivers for your card?
==> http://www.msi.com/product/vga/N580GTX-Lightning-Xtreme-Edition.html#/?div=Driver&os=All
Remove current driver with >>Driver Sweeper<< in 'Safe Mode' before install the new one
Quote from: Frakatchoo on 07-September-11, 22:13:04
It's only unstable when i'm use the GPU (Games & benchs), not HD videos.
Most games/bench crashes with default clock @ 1.031v. I tried to overvolted & undervolted the GPU, but my tests were not conclusive. The only way i've found to have all games/benchs stable is to downclock the GPU as I explained in my first post.
Maybe i need a more accurate GPU voltage ? Is it important to change Memory & Aux voltage too ?
have you tested with 1050mV for core?
Quote
Is it important to change Memory & Aux voltage too ?
normally not, but depend what exactly is unstable
But it should work fine by default as is

N580GTX Lightning XE VBIOS Request

Similar Messages

Maybe you are looking for