N5K - commit imported config always failed
Hello al.
I have upgrade a N5K (5010) cluster to SW version 5.0(2)N1(1)
When I want to commit a configuration into a switch profile I always receive the error "Failed: Verify Failed"
Neither I want to commit only one rule I still receive the same error.
Any Idea what I'm doing wrong?
I followed the Release Notes for 5.0(2
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/release/notes/Rel_5_0_2_N1_1/Nexus5000_Release_Notes_5_0_2_N1_1.html
HI16955# configure sync
Enter configuration commands, one per line. End with CNTL/Z.
HI16955(config-sync)# switch-profile SYNC
Switch-Profile started, Profile ID is 1
HI16955(config-sync-sp)# import running-config
HI16955(config-sync-sp-import)# show switch-profile SYNC buffer
switch-profile : SYNC
Seq-no Command
4 vlan 3
4.1 name 3_vlan_3
5 vlan 4
5.1 name 4_mgmt_mon
6 vlan 5
6.1 name 5_tp_router
7 vlan 6
7.1 name 6_int_servers
8 vlan 8
8.1 name 8_vpn_lan
9 vlan 10
9.1 name 10_dmz1
HI16955(config-sync-sp-import)# commit
Failed: Verify Failed
HI16955(config-sync-sp-import)#
Regards
Tom Lauwereins
Hello al.
I have upgrade a N5K (5010) cluster to SW version 5.0(2)N1(1)
When I want to commit a configuration into a switch profile I always receive the error "Failed: Verify Failed"
Neither I want to commit only one rule I still receive the same error.
Any Idea what I'm doing wrong?
I followed the Release Notes for 5.0(2
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/release/notes/Rel_5_0_2_N1_1/Nexus5000_Release_Notes_5_0_2_N1_1.html
HI16955# configure sync
Enter configuration commands, one per line. End with CNTL/Z.
HI16955(config-sync)# switch-profile SYNC
Switch-Profile started, Profile ID is 1
HI16955(config-sync-sp)# import running-config
HI16955(config-sync-sp-import)# show switch-profile SYNC buffer
switch-profile : SYNC
Seq-no Command
4 vlan 3
4.1 name 3_vlan_3
5 vlan 4
5.1 name 4_mgmt_mon
6 vlan 5
6.1 name 5_tp_router
7 vlan 6
7.1 name 6_int_servers
8 vlan 8
8.1 name 8_vpn_lan
9 vlan 10
9.1 name 10_dmz1
HI16955(config-sync-sp-import)# commit
Failed: Verify Failed
HI16955(config-sync-sp-import)#
Regards
Tom Lauwereins
Similar Messages
-
Utils import config command failed on CUCM8.6.1
I've created cucm861sub.flp file and uploaded it to the datastore on ESXi 4.1, then mapped to the floppy, i.e. I followed procedure on cisco wiki to the last letter. Still, after applying command I'm receiving following error: "Cannot locate configuration file"
I've used Winimage to crate 1.44MB floppy that contains only one file, called platformConfig.xml (file was downloaded directly from CCO).
Was anybody able to apply successfully new identity feature?I opened a TAC case and found this is a bug. CSCtx55507 :utils import config" is failing.
these are the call manager versions that has the fix for this issue: 8.6(2.10000.30), 8.6(1.98000.87), 8.6(1.98000.39) or any later version. -
Integrating OID with AD: Import Config/ Synchronization fails
I am trying to integrate OID with AD. The bootstrap is successful. I added a new entry to the AD after the bootstrap. The sync interval in OID is set to 10 seconds. The Synchronization Status in OID changes, but it is not successful.
The updated Synchronization status is "Agent Execution Successful, Mapping/IMPORT operation Failure".
Please help me with the following exception. Here is the text from the trace file:
Changetype is 5
Processing modifyRadd Operation ..
Entry Not Found. Converting to an ADD op..
Processing Insert Operation ..
Performing createEntry..
Exception creating Entry : javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient Access Rights]; remaining name 'cn=test,cn=users,dc=its-ese,dc=local'
[LDAP: error code 50 - Insufficient Access Rights]
javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient Access Rights]; remaining name 'cn=test,cn=users,dc=its-ese,dc=local'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:2996)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_createSubcontext(LdapCtx.java:777)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_createSubcontext(ComponentDirContext.java:319)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:248)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.createSubcontext(PartialCompositeDirContext.java:236)
at javax.naming.directory.InitialDirContext.createSubcontext(InitialDirContext.java:176)
at oracle.ldap.odip.gsi.LDAPWriter.createEntry(LDAPWriter.java:1056)
at oracle.ldap.odip.gsi.LDAPWriter.insert(LDAPWriter.java:409)
at oracle.ldap.odip.gsi.LDAPWriter.modifyRadd(LDAPWriter.java:748)
at oracle.ldap.odip.gsi.LDAPWriter.writeChanges(LDAPWriter.java:335)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:581)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:306)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:186)
DIP_LDAPWRITER_ERROR_CREATE
Error in executing mapping DIP_LDAPWRITER_ERROR_CREATE
DIP_LDAPWRITER_ERROR_CREATE
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:722)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:306)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:186)
DIP_LDAPWRITER_ERROR_CREATE
ActiveChgImp:Error in Mapping EngineDIP_LDAPWRITER_ERROR_CREATE
DIP_LDAPWRITER_ERROR_CREATE
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:741)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:306)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:186)
ActiveChgImp:about to Update exec status
Updated Attributes
orclodipLastExecutionTime: 20080915141948Hi,
you will need to follow Metalink Note
276481.1 Troubleshooting OID DIP Synchronization Issues -> Problem 11
What you see is an ACI issue on OID server, caused by the fact that you are using a different container.
BR,
Octavian -
Getting "File copy Config Sync Failed. Commit unsuccessful! " on CSS-11155
Getting a strange error "FILE copy Config Sync Failed. Commit unsuccessful!" from the following and I am not sure what it exactly means:
cce01-c35-in# sh app
APP CONFIGURATION:
Enabled PortNumber: 5001 MaxFrameSize: 10240
cce01-c35-in# sh app session
App Session Information 'no hostname':
Session ID: 839f0990 IP Address: 10.10.10.2 State: APP_SESSION_UP
css-c09-nz# commit_redundConfig "10.10.10.2"
Verifying app and redundancy configs ... -
Checking local and remote switch versions ...|
Checking Backup app session up.... \
Checking redundancy state.... -
Working /
Waiting for completion signal from remote switch .../
Verifying running-config copy success ...-
File copy Config Sync Failed. Commit unsuccessful!
localconfig: 6238 bytes
remoteconfig : 6150 bytes
css-c09-nz#there is at least one know bug :
CSCdx89818 - config sync fails
I could not check if this applies to you since you did not provide your version.
This bug was fixed in the following release :
006.010(000.004) 05.3(00.18)S 05.0(00.54)S 05.10(01.03)S
Gilles. -
System Image Utility always fails, why?
Hi everyone,
on my clean and fresh install of 10.7.4 Server the System Image Utility always fails to create an image. I want to create a NetInstall image and have put the OS X Lion Installer in /Applications. I can select it in SIU and choose to create a NetInstall image. It asks for the admin pw and always presents an error at the very end: Image creation failed. An unknown error has occured.
If I select to create a NetBoot image instead it fails directly after clicking on the Create button with this slightly different message: Image creation failed. An error has occured. At least it’s no unknown error…
Any ideas what might be causing this? I have succesfully created NetInstall images with 10.6 Server and 10.8 Server, but 10.7 Server somehow won’t play nice.
Thanks
BjörnHi Brian,
I first deleted the Installer and redownloaded it from the App Store, just to make sure there was no problem with it. Even though I now have the 10.7.4 Installer (had 10.7.0 before) nothing has changed. I then went on to set the log level as suggested. I now get different errors based on the chosen log level.
Log level set to debug:
Image creation failed.
*** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
Log level set to verbose:
Image creation failed.
An unknown error has occurred.
I did not see anything helpful in the logs unfortunately. The only noticeable thing mentioned was: Failed to create image from installer media.
Any additional ideas? I will attach both logs here, just in case.
VERBOSE LOG:
Starting image creation.
Workflow Started (2012-09-08 14:08:00 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
Attaching disk image
Copying /Volumes/Mac OS X Install ESD
Preparing the kernel and boot loader for the boot image
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386
/Users/vm/Desktop/NetInstall of Install Mac OS X Lion/i386/x86_64
Copying /Volumes/Mac OS X Install ESD/boot.efi
Copying /Volumes/Mac OS X Install ESD/System/Library/CoreServices/PlatformSupport.plist
Performing post install cleanup
Detaching disk image
"disk4" unmounted.
"disk4" ejected.
Correcting permissions. 501:20 /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Script is done.
Failed to create image from installer media.
An unknown error has occurred.
NetInstall creation failed.
Image creation process finished...
Stopping image creation.
Image creation failed.
DEBUG LOG:
Starting image creation.
Workflow Started (2012-09-08 13:59:22 +0200)
Mac OS X Server 10.7.4 (11E53), System Image Utility 10.7.3 (543)
Starting action: Define Image Source (1.3)
Finished running action: Define Image Source
Starting action: Create Image (1.6.2)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Installer media.
progressPrefix="_progress"
++ progressPrefix=_progress
scriptsDebugKey="DEBUG"
++ scriptsDebugKey=DEBUG
imageIsUDIFKey="1"
++ imageIsUDIFKey=1
mountPoint=""
++ mountPoint=
ownershipInfoKey="501:20"
++ ownershipInfoKey=501:20
destVolFSType="HFS+"
++ destVolFSType=HFS+
installSource="/Volumes/Mac OS X Install ESD"
++ installSource='/Volumes/Mac OS X Install ESD'
dmgTarget="NetInstall"
++ dmgTarget=NetInstall
destPath="/Users/vm/Desktop/NetInstall of Install Mac OS X Lion"
++ destPath='/Users/vm/Desktop/NetInstall of Install Mac OS X Lion'
dmgVolName="NetInstall"
++ dmgVolName=NetInstall
. "${1}/createCommon.sh"
+ . /tmp/niutemp.Yv8Z6Mqx/createCommon.sh
# createCommon.sh
# Common functionality for the Image creation process.
# sourced in by the various SIU scripts
# Copyright © 2007-2011 Apple Inc. All rights reserved.
# Using dscl, create a user account
AddLocalUser()
# $1 volume whose local node database to modify
# $2 long name
# $3 short name
# $4 isAdminUser key
# $5 password data
# $6 password hint
# $7 user picture path
# $8 Language string
local databasePath="/Local/Default/Users/${3}"
local targetVol="${1}"
# Find a free UID between 501 and 599
for ((i=501; i<600; i++)); do
output=`/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -search /Local/Default/Users UniqueID $i`
# If there is already an account dscl returns it, so we're looking for an empty return value.
if [ "$output" == "" ]; then
break
fi
done
# Create the user record
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -create $databasePath
if [ $? != 0 ]; then
echo "Failed to create '${databasePath}'."
return 1
fi
# Add long name
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath RealName "${2}"
if [ $? != 0 ]; then
echo "Failed to set the RealName."
return 1
fi
# Add PrimaryGroupID
if [ "${4}" == 1 ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 80
else
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath PrimaryGroupID 20
fi
if [ $? != 0 ]; then
echo "Failed to set the PrimaryGroupID."
return 1
fi
# Add UniqueID
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UniqueID ${i}
if [ $? != 0 ]; then
echo "Failed to set the UniqueID."
return 1
fi
# Add Home Directory entry
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath NFSHomeDirectory /Users/${3}
if [ $? != 0 ]; then
echo "Failed to set the NFSHomeDirectory."
fi
if [ "${6}" != "" ]; then
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath AuthenticationHint "${6}"
if [ $? != 0 ]; then
echo "Failed to set the AuthenticationHint."
return 1
fi
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath picture "${7}"
if [ $? != 0 ]; then
echo "Failed to set the picture."
return 1
fi
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -passwd $databasePath "${5}"
if [ $? != 0 ]; then
echo "Failed to set the passwd."
return 1
fi
# Add shell
/usr/bin/dscl -f "${targetVol}/var/db/dslocal/nodes/Default" localonly -append $databasePath UserShell "/bin/bash"
if [ $? != 0 ]; then
echo "Failed to set the UserShell."
return 1
fi
# Create Home directory
if [ -e "/System/Library/User Template/${8}.lproj/" ]; then
/usr/bin/ditto "/System/Library/User Template/${8}.lproj/" "${targetVol}/Users/${3}"
else
/usr/bin/ditto "/System/Library/User Template/English.lproj/" "${targetVol}/Users/${3}"
fi
if [ $? != 0 ]; then
echo "Failed to copy the User Template."
return 1
fi
/usr/sbin/chown -R $i:$i "${targetVol}/Users/${3}"
if [ $? != 0 ]; then
echo "Failed to set ownership on the User folder."
return 1
fi
# Copies a list of files (full paths contained in the file at $1) from source to the path specified in $2
CopyEntriesFromFileToPath()
local theFile="$1"
local theDest="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
/usr/bin/ditto $opt "${FILE}" "${theDest}/${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Copies a list of packages (full path, destination pairs contained in the file at $1) from source to .../System/Installation/Packages/
CopyPackagesWithDestinationsFromFile()
local theFile="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
local leafName=`basename "${FILE}"`
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Copying ${FILE}."
fi
read SUB_PATH
/usr/bin/ditto $opt "${FILE}" "${mountPoint}/Packages/${SUB_PATH}${leafName}" || return 1
fi
done < "${theFile}"
return 0
# Create an installer package in ${1} wrapping the supplied script ${2}
CreateInstallPackageForScript()
local tempDir="$1"
local scriptPath="$2"
local scriptName=`basename "${scriptPath}"`
local entryDir=`pwd`
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Create installer for script ${scriptName}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# shouldn't exist on entry...
if [ -e "${tempDir}/emptyDir" ]; then
/bin/rm -rf "${tempDir}/emptyDir"
fi
# make some directories to work in
/bin/mkdir $opt -p "${tempDir}/${scriptName}.pkg/Contents/Resources" || return 1
/bin/mkdir $opt "${tempDir}/emptyDir" || return 1
# Create Archive.pax.gz
cd "${tempDir}/emptyDir"
/bin/pax -w -x cpio -f "${tempDir}/${scriptName}.pkg/Contents/Archive.pax" .
/usr/bin/gzip "${tempDir}/${scriptName}.pkg/Contents/Archive.pax"
cd "${entryDir}"
# Create the Archive.bom file
/usr/bin/mkbom "${tempDir}/emptyDir/" "${tempDir}/${scriptName}.pkg/Contents/Archive.bom" || return 1
# Create the Info.plist
/bin/cat > "${tempDir}/${scriptName}.pkg/Contents/Info.plist" << END
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.server.SystemImageUtility.${scriptName}</string>
<key>CFBundleShortVersionString</key>
<string>1</string>
<key>IFMajorVersion</key>
<integer>1</integer>
<key>IFMinorVersion</key>
<integer>0</integer>
<key>IFPkgFlagDefaultLocation</key>
<string>/tmp</string>
<key>IFPkgFlagInstallFat</key>
<false/>
<key>IFPkgFlagIsRequired</key>
<false/>
<key>IFPkgFormatVersion</key>
<real>0.10000000149011612</real>
</dict>
</plist>
END
echo "pkmkrpkg1" > "${tempDir}/${scriptName}.pkg/Contents/PkgInfo"
echo "major: 1\nminor: 0" > "${tempDir}/${scriptName}.pkg/Contents/Resources/package_version"
# Copy the script
/bin/cp "$scriptPath" "${tempDir}/${scriptName}.pkg/Contents/Resources/postflight"
# clean up
/bin/rm -r "${tempDir}/emptyDir"
return 0
# Validate or create the requested directory
CreateOrValidatePath()
local targetDir="$1"
if [ ! -d "${targetDir}" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Creating working path at ${targetDir}"
fi
/bin/mkdir -p "${targetDir}" || return 1
fi
# If any exist, apply any user accounts
CreateUserAccounts()
# $1 volume whose local node database to modify
local count="${#userFullName[*]}"
local targetVol="${1}"
if [ $count -gt 0 ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding $count user account(s) to the image"
fi
for ((index=0; index<$count; index++)); do
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Adding user ${userFullName[$index]}"
fi
#lay down user here
AddLocalUser "${targetVol}" "${userFullName[$index]}" "${userUnixName[$index]}" "${userIsAdmin[$index]}" "${userPassword[$index]}" "${userPassHint[$index]}" "${userImagePath[$index]}" "${userLanguage[$index]}"
if [ $? != 0 ]; then
echo "Failed to create the User '${userUnixName[$index]}'."
return 1
fi
done
# "touch"
/usr/bin/touch "${targetVol}/private/var/db/.AppleSetupDone"
/usr/bin/touch "${targetVol}/Library/Receipts/.SetupRegComplete"
fi
# retry the hdiutil detach until we either time out or it succeeds
retry_hdiutil_detach()
local mount_point="${1}"
local tries=0
local forceAt=0
local limit=24
local opt=""
forceAt=$(($limit - 1))
while [ $tries -lt $limit ]; do
tries=$(( tries + 1 ))
/bin/sleep 5
echo "Attempting to detach the disk image again..."
/usr/bin/hdiutil detach "${mount_point}" $opt
if [ $? -ne 0 ]; then
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${mount_point}"
fi
if [ $tries -eq $forceAt ]; then
echo "Failed to detach disk image at '${mount_point}' normally, adding -force."
opt="-force"
fi
if [ $tries -eq $limit ]; then
echo "Failed to detach disk image at '${mount_point}'."
exit 1
fi
else
tries=$limit
fi
done
# Create the dyld shared cache files
DetachAndRemoveMount()
local theMount="${1}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Detaching disk image"
# Dump a list of any still open files on the mountPoint
if [ "${scriptsDebugKey}" == "DEBUG" ]; then
/usr/sbin/lsof +fg "${theMount}"
fi
fi
# Finally detach the image and dispose the mountPoint directory
/usr/bin/hdiutil detach "${theMount}" || retry_hdiutil_detach "${theMount}" || return 1
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexec/PlistBuddy -c "Delete :com.apple.NetBootClientHelper" "${targetVol}/var/db/launchd.db/com.apple.launchd/overrides.plist" > /dev/null 2>&1
fi
return 0
# If any exist, install configuration profiles to the install image
InstallConfigurationProfiles()
local tempDir="${1}"
local targetVol="${2}"
local profilesDir="${targetVol}/var/db/ConfigurationProfiles"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/configProfiles.txt" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Configuration Profiles"
fi
/bin/mkdir -p "${profilesDir}/Setup" || return 1
# Make sure the perms are correct
/usr/sbin/chown root:wheel "${profilesDir}"
/bin/chmod 755 "${profilesDir}"
/usr/sbin/chown root:wheel "${profilesDir}/Setup"
/bin/chmod 755 "${profilesDir}/Setup"
/usr/bin/touch "${profilesDir}/.profilesAreInstalled"
CopyEntriesFromFileToPath "${tempDir}/configProfiles.txt" "${profilesDir}/Setup" || return 1
# Enable MCX debugging
if [ 1 == 1 ]; then
if [ -e "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" ]; then
/usr/libexec/PlistBuddy -c "Delete :debugOutput" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Delete :collateLogs" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
/usr/libexec/PlistBuddy -c "Add :debugOutput string -2" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
/usr/libexec/PlistBuddy -c "Add :collateLogs string 1" "${targetVol}/Library/Preferences/com.apple.MCXDebug.plist" > /dev/null 2>&1
fi
fi
# Converts a list of scripts (full paths contained in the file at $1) into packages in $3
InstallScriptsFromFile()
local tempDir="${1}"
local theFile="${2}"
local targetDir="${3}"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Converting scripts into install packages"
fi
while read FILE
do
if [ -e "${FILE}" ]; then
# make an installer package out of the script
CreateInstallPackageForScript "$tempDir" "${FILE}" || return 1
# copy the resulting package to the Packages directory
local leafName=`basename "${FILE}"`
/usr/bin/ditto $opt "${tempDir}/${leafName}.pkg" "${targetDir}/${leafName}.pkg" || return 1
# clean up
/bin/rm -r "${tempDir}/${leafName}.pkg"
fi
done < "${theFile}"
return 0
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PostFlightDestination()
local tempDir="${1}"
local destDir="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Performing post install cleanup"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
# delete the DS indices to force reindexing...
if [ -e "${mountPoint}/var/db/dslocal/indices/Default/index" ]; then
/bin/rm $opt "${mountPoint}/var/db/dslocal/indices/Default/index"
fi
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
if [ $? != 0 ]; then
echo "Failed to detach and clean up the mount at '${mountPoint}'."
return 1
fi
echo "Correcting permissions. ${ownershipInfoKey} $destDir"
/usr/sbin/chown -R "${ownershipInfoKey}" "$destDir"
# Prepare the source by deleting stuff we don't want to copy if sourcing a volume
PreCleanSource()
local srcVol="$1"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
opt="-v"
fi
fi
if [ -e "$srcVol/private/var/vm/swapfile*" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Removing swapfiles on $1"
fi
/bin/rm $opt "$srcVol/private/var/vm/swapfile*"
fi
if [ -d "$srcVol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for t /bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > "${mountPoint}/etc/sshd_config" << END
HostKey /private/var/tmp/ssh_host_key
HostKey /private/var/tmp/ssh_host_rsa_key
HostKey /private/var/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libexmountPoint=`mktemp -d "/tmp/mnt.XXXXXXXX"`
errExit()
echo "Execution of '`basename ${0}`' failed. Cleaning up."
# detach the disk and remove the mount folder
DetachAndRemoveMount "${mountPoint}"
/bin/rm -r "${destPath}"
exit 1
# Set up for script debugging
debug_opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
debug_opt="-v"
fi
# Prepare the destination
CreateOrValidatePath "$destPath" || errExit
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and kext cache for tPERCENT:0.000000
PERCENT:4.332841
PERCENT:8.985722
PERCENT:12.358444
PERCENT:14.524864
PERCENT:16.617430
PERCENT:19.522402
PERCENT:21.614967
PERCENT:23.535204
PERCENT:26.070902
PERCENT:29.271296
PERCENT:33.111767
PERCENT:38.847858
PERCENT:42.343674
PERCENT:44.707043
PERCENT:46.578041
PERCENT:49.138355
PERCENT:51.772526
PERCENT:55.563763
PERCENT:58.567207
PERCENT:62.210735
PERCENT:64.795670
PERCENT:69.719353
PERCENT:74.741508
PERCENT:77.055641
PERCENT:79.591331
PERCENT:83.013290
PERCENT:85.548988
PERCENT:88.010834
PERCENT:91.728210
PERCENT:97.710487
PERCENT:100.000000
PERCENT:-1.000000
Finalizing disk image.
created: /Users/vm/Desktop/NetInstall of Install Mac OS X Lion/NetInstall.dmg
/bin/rmdir "${theMount}" || return 1
return 0
# If the pieces exist, enable remote access for the shell image
EnableRemoteAccess()
local srcVol="${1}"
local opt=""
if [ -e "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Enabling shell image remote access support"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
fi
# install some things (again which aren't part of BaseSystem) needed for remote ASR installs
/usr/bin/ditto $opt "${srcVol}/usr/lib/pam/pam_serialnumber.so.2" "${mountPoint}/usr/lib/pam/pam_serialnumber.so.2" || return 1
if [ -e "${srcVol}/usr/sbin/installer" ]; then
/usr/bin/ditto $opt "${srcVol}/usr/sbin/installer" "${mountPoint}/usr/sbin/installer" || return 1
fi
# copy the sshd config and add our keys to the end of it
if [ -e "${srcVol}/etc/sshd_config" ]; then
/bin/cat "${srcVol}/etc/sshd_config" - > Creating working path at /Users/vm/Desktop/NetInstall of Install Mac OS X Lion
Creating disk image (Size: 4062 MB)
/tmp/ssh_host_dsa_key
END
fi
fi
return 0
# If it exists, install the sharing names and/or directory binding support to the install image
HandleNetBootClientHelper()
local tempDir="${1}"
local targetVol="${2}"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
opt="-v"
fi
if [ -e "${tempDir}/bindingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Directory Service binding information"
fi
/usr/bin/ditto $opt "${tempDir}/bindingNames.plist" "${targetVol}/etc/bindingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/bindingNames.plist"
/bin/chmod 644 "${targetVol}/etc/bindingNames.plist"
fi
if [ -e "${tempDir}/sharingNames.plist" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Installing Sharing Names support"
fi
/usr/bin/ditto $opt "${tempDir}/sharingNames.plist" "${targetVol}/etc/sharingNames.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/etc/sharingNames.plist"
/bin/chmod 644 "${targetVol}/etc/sharingNames.plist"
fi
if [ -e "${tempDir}/NetBootClientHelper" ]; then
/usr/bin/ditto $opt "${tempDir}/NetBootClientHelper" "${targetVol}/usr/sbin/NetBootClientHelper" || return 1
/usr/sbin/chown root:wheel "${targetVol}/usr/sbin/NetBootClientHelper"
/bin/chmod 555 "${targetVol}/usr/sbin/NetBootClientHelper"
/usr/bin/ditto $opt "${tempDir}/com.apple.NetBootClientHelper.plist" "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist" || return 1
/usr/sbin/chown root:wheel "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
/bin/chmod 644 "${targetVol}/System/Library/LaunchDaemons/com.apple.NetBootClientHelper.plist"
# finally, make sure it isn't disabled...
/usr/libex
# update progress information
echo "${progressPrefix}_creatingImage_"
if [ -e "${installSource}/BaseSystem.dmg" ]; then
size=$2
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Creating disk image (Size: $size MB)"
fi
/usr/bin/hdiutil create "$destPath/$dmgTarget" -megabytes $size -volname "${dmgVolName}" -uid 0 -gid 80 -mode 1775 -layout "SPUD" -fs "$destVolFSType" -stretch 500g -ov -puppetstrings || errExit
echo "${progressPrefix}_copyingSource_"
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ] ; then
echo "Attaching disk image"
fi
/usr/bin/hdiutil attach "${destPath}/${dmgTarget}.dmg" -owners on -nobrowse -noautoopen -mountpoint "${mountPoint}" -quiet || errExit
# Copy source Volume base system to
/usr/bin/ditto $debug_opt "${installSource}" "${mountPoint}" || errExit
else
echo "This does not appear to be a Mac OS X Install DVD."
errExit
fi
# If adding any additional packages or scripts
if [ -e "${1}/OSInstall.collection" ]; then
/usr/bin/ditto $debug_opt "${1}/OSInstall.collection" "${mountPoint}/Packages/OSInstall.collection" || errExit
/usr/sbin/chown root:wheel "${mountPoint}/Packages/OSInstall.collection"
# If adding any additional packages
if [ -e "${1}/additionalPackages.txt" ]; then
CopyPackagesWithDestinationsFromFile "${1}/additionalPackages.txt" || errExit
fi
# If adding any scripts
if [ -e "${1}/additionalScripts.txt" ]; then
InstallScriptsFromFile "${1}" "${1}/additionalScripts.txt" "${mountPoint}/Packages" || errExit
fi
fi
# If it exists, install the partition data onto the install image
ProcessAutoPartition "${1}" || errExit
# If it exists, install minstallconfig.xml (AutoInstall data) onto the install image
ProcessMinInstall "${1}" || errExit
# update progress information
echo "${progressPrefix}_buildingBooter_"
# Copy kernel and boot loader
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Preparing the kernel and boot loader for the boot image"
fi
# make sure this doesn't exist
if [ -e "${destPath}/i386" ]; then
/bin/rm -rf "${destPath}/i386"
fi
/bin/mkdir -p $debug_opt "${destPath}/i386/x86_64" || errExit
# copy these directly off the install media
/usr/bin/ditto $debug_opt "${installSource}/boot.efi" "${destPath}/i386/booter" || errExit
/usr/bin/chflags nohidden "${destPath}/i386/booter"
# Grab the relevant portion of the com.apple.Boot.plist
kernelFlags=`/usr/libexec/PlistBuddy -c "print :'Kernel Flags'" "${installSource}/Library/Preferences/SystemConfiguration/com.apple.Boot.plist"`
/usr/libexec/PlistBuddy -c "add :'Kernel Flags' string ${kernelFlags}" "${destPath}/i386/com.apple.Boot.plist" > /dev/null 2>&1
/usr/bin/ditto $debug_opt "${installSource}/System/Library/CoreServices/PlatformSupport.plist" "${destPath}/i386/PlatformSupport.plist" || errExit
# extract the kernel & kernelcache for the boot shell
/usr/bin/lipo -extract i386 "${mountPoint}/kernelcache" -output "${destPath}/i386/kernelcache" || errExit
/usr/bin/lipo -extract x86_64 "${mountPoint}/kernelcache" -output "${destPath}/i386/x86_64/kernelcache" || errExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
rrExit
# Apply choice changes, if any
if [ -e "${1}/MacOSXInstaller.choiceChanges" ]; then
echo "Copy over package choice selection."
/usr/bin/ditto $debug_opt "${1}/MacOSXInstaller.choiceChanges" "${mountPoint}/Packages/Extras/MacOSXInstaller.choiceChanges"
fi
# update progress information
echo "${progressPrefix}_finishingUp_"
# perform the final cleanup
PostFlightDestination "${1}" "$destPath" || errExit
tDestination "${1}" "$destPath" || errExit
errExit
Vol/private/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/tmp/*"
fi
if [ -d "$srcVol/private/var/tmp" ]; then
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out /private/var/tmp on $1"
fi
/bin/rm -r $opt "$srcVol/private/var/tmp/*"
fi
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
echo "Cleaning out devices and volumes on $1"
fi
if [ -d "$srcVol/Volumes" ]; then
/bin/rm -r $opt "$srcVol/Volumes/*"
fi
if [ -d "$srcVol/dev" ]; then
/bin/rm $opt "$srcVol/dev/*"
fi
if [ -d "$srcVol/private/var/run" ]; then
/bin/rm -r $opt "$srcVol/private/var/run/*"
fi
# Copy kernel and build the kext cache on the boot image
PrepareKernelAndKextCache()
local srcDir="$1"
local destDir="$2"
local opt=""
if [ "${scriptsDebugKey}" == "VERBOSE" -o "${scriptsDebugKey}" == "DEBUG" ]; then
Stopping image creation.
Terminating script!
Image creation failed. -
Always fail to deploy to server when (Create a Simple EJB Session Bean )
Hi,
I'm trying the "Oracle JDeveloper 11g Tutorials" - "Create a Simple EJB Session Bean", I just follow the instructions in that page. But when I tried to run it, it always failed. Can anyone help me to have a look. I paste the log below. thank you.
There's an error in the log "java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener". but I don't know what's that meaning.
E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;e:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;e:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;e:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;E:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;e:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;e:\Oracle\MIDDLE~1\JDK160~1\jre\bin;e:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\D\JACKYH\Installed\apache-ant-1.7.1\bin;C:\Program Files\TortoiseSVN\bin;C:\Program Files\CollabNet Subversion;U:.;V:.;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
e:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<12/11/2008 10:54:31 AM EST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
E:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<12/11/2008 10:54:32 AM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<12/11/2008 10:54:32 AM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<12/11/2008 10:54:33 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<12/11/2008 10:54:33 AM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<12/11/2008 10:54:34 AM EST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<12/11/2008 10:54:36 AM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<12/11/2008 10:54:38 AM EST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<12/11/2008 10:54:38 AM EST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<12/11/2008 10:54:39 AM EST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<12/11/2008 10:54:39 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<12/11/2008 10:54:39 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.12.54:7101 for protocols iiop, t3, ldap, snmp, http.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<12/11/2008 10:54:39 AM EST> <Warning> <Server> <BEA-002611> <Hostname "jackyh.dst.com.au", maps to multiple IP addresses: 192.168.12.54, 127.0.0.1>
<12/11/2008 10:54:39 AM EST> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 192.168.12.54, 127.0.0.1>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 13829 ms.
DefaultServer started.
[Running application SessionEJB on Server Instance DefaultServer...]
---- Deployment started. ---- 12/11/2008 10:54:43
Target platform is (Weblogic 10.3).
Running dependency analysis...
2008-11-12 10:54:43.882: Writing EJB JAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB\SessionEJB-Project1-ejb
2008-11-12 10:54:43.914: Wrote EJB JAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB\SessionEJB-Project1-ejb
2008-11-12 10:54:44.148: Writing EAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB
2008-11-12 10:54:44.164: Wrote EAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB
Deploying Application...
<12/11/2008 10:54:46 AM EST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1226447686226' for task '0'. Error is: 'weblogic.management.DeploymentException: '
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
Truncated. see log file for complete stacktrace
>
<12/11/2008 10:54:46 AM EST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SessionEJB'.>
<12/11/2008 10:54:46 AM EST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application SessionEJB on DefaultServer.: .
weblogic.management.DeploymentException:
#### Deployment incomplete. #### 12/11/2008 10:54:46
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$4$1.run(AdrsStarter.java:1316)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
... 12 more
#### Cannot run application SessionEJB due to error deploying to DefaultServer.
[Application SessionEJB stopped and undeployed from Server Instance DefaultServer]Steve,
I'm facing the same issue as user#####.
Your workaround does not work ; when I deploy manuelly the ear file, with a new weblogic-application.xml, I get the same error.
Does that happen a lot ? :p
Edit :
my web.xml :
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<description>Empty web.xml file for Web Application</description>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<context-param>
<description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
<param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
<param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
<param-value>false</param-value>
</context-param>
<filter>
<filter-name>JpsFilter</filter-name>
<filter-class>oracle.security.jps.ee.http.JpsFilter</filter-class>
</filter>
<filter>
<filter-name>trinidad</filter-name>
<filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter>
<filter-name>adfBindings</filter-name>
<filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>JpsFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>trinidad</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<servlet-name>Faces Servlet</servlet-name>
<dispatcher>FORWARD</dispatcher>
<dispatcher>REQUEST</dispatcher>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
</web-app>Luc-
Edited by: Lucas Ismag on 4 déc. 2008 05:33 -
First flexunit test is always failing with Error Error #1009: Cannot access a property or method of
Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
test:
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
[flexunit] Setting up server process ...
[flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Client connected.
[flexunit] Setting inbound buffer size to [262144] bytes.
[flexunit] Receiving data ...
[flexunit] Sending acknowledgement to player to start sending test data ...
[flexunit]
[flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
[flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
[flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
[flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
[flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
[flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
[flexunit] at org.flexunit.listeners::CIListener/dataHandler()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
[flexunit] <endOfTestRun/>
[flexunit] Analyzing reports ...
[flexunit]
[flexunit] Suite: Tests.Classes.DummyASyncTest
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
[flexunit] Results :
[flexunit]
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
BUILD FAILED
/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:390)
at org.apache.tools.ant.Target.performTasks(Target.java:411)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.Main.runBuild(Main.java:809)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something.Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
test:
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
[flexunit] Setting up server process ...
[flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Client connected.
[flexunit] Setting inbound buffer size to [262144] bytes.
[flexunit] Receiving data ...
[flexunit] Sending acknowledgement to player to start sending test data ...
[flexunit]
[flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
[flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
[flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
[flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
[flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
[flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runners::Suite/runChild()
[flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
[flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
[flexunit] at org.flexunit.runners::ParentRunner/run()
[flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
[flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
[flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
[flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
[flexunit] at org.flexunit.listeners::CIListener/dataHandler()
[flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
[flexunit] at flash.events::EventDispatcher/dispatchEvent()
[flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
[flexunit] <endOfTestRun/>
[flexunit] Analyzing reports ...
[flexunit]
[flexunit] Suite: Tests.Classes.DummyASyncTest
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
[flexunit] Results :
[flexunit]
[flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
[flexunit]
BUILD FAILED
/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:390)
at org.apache.tools.ant.Target.performTasks(Target.java:411)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
at org.apache.tools.ant.Main.runBuild(Main.java:809)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something. -
Redeploy process with HumanWorkflow always failed
Hello,
I need urgent help with OracleBpel server. The problem is when I try to redploy process with HumanWorkflow - deployment always failed with message:
Caused by: oracle.oc4j.rmi.OracleRemoteException: An exception occurred during transaction completion: ; nested exception is:
javax.transaction.RollbackException: Timed out
at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:141)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
... 25 more
Caused by: javax.transaction.RollbackException: Timed out
at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:582)
at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:244)
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:130)
at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:433)
at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:132)
... 33 more
There are no instances running of this process, restarting server, database does not resolve problem. Other processes deployment ok - no problem.
BPEL version 10.1.3.1.0 on Windows machine.
Please help !!!
Regards
TomIn SRM
see inbound queue
queue 1 failed
queue 2 waiting
queue 3 waiting
now you have to click the queue 1 and see what is the PR number and delete only
queue 1 only
and remaining queue 2 and queue 3 you
can reprocess and it will be disappeared.
you need to explore what caused on that noted PR and inform the failure of the PR so sthat he can correct the data and it can be processed and transfered to SRM. -
Can't import config to anything beyond 6.01 - say it isn't so
Hi all
Just downloaded, burned, and delivered MARS 6 image to one of our sites last week. Target box reimaged from 4.3.6. Exported config from 4.3.6, etc. according to the Cisco documents.
After the re-image, on the config import, i hit this error
File from_04_3_60_to_06_0_60.sql missing from schema.
Configuration import failed with error code: 1
Configrestore failed!
Error: failed to import config data.
A bit of digging - turns out apparently I have to reimage specifically to v 6.01, import the original config to that version, then update the 6.01 image with each sequential 6.x point release individually.
Is this correct?
OK - you got me on a technicality - the upgrade docs do refer to 6.01, but silly me, I just assumed that subsequent point releases of MARS would maintain / preserve the same functionality so I used the latest available 6.06 image.
Is there a quick fix? otherwise this looks like a do-over -and if that works, then a lot of incremental updates.
<sigh>....Yes, unfortunately migration from version 4.3.6 only works to version 6.0.1, and you would need to perform incremental upgrade from version 6.0.1 onwards. Sorry, no easy and quick way unfortunately.
-
Import/Export Jobs Fail - ORA-01017 Invalid UserName/PW - Solved!
Every time I try to run either an Import or Export Job from OEM it always fails with ORA-01017 Invalid UserName/PW.
I have read numerous posts in this forum on related topics.
Suggestion have been;
1. Make sure OS login is a member of the ORA_DBA group.
2. Make sure the OS user has the ability to logon as batch job.
3. Make sure the ORACLE_SID and ORACLE_HOME are set.
4. Make sure to set up Preferred Credentials on the Preferences page.
4. On and on and on.
I am using Oracle Version 10.2.0.1.0 On Windows 2003 Server Enterprise SP1.
When I installed the DB using Oracle Universal Installer it asks what Password you would like to assign to SYS, SYSTEM etc. I used the following password "AvT_$651#JK" which it accepted without problem. The installation completed and I am able to log into OEM using SYS/AvT_$651#JK (SYSDBA) or SYSTEM/AvT_$651#JK (Normal).
I then proceed to "import from export files" a schema from a previously "export to export files" that was created on another host using the same Oracle Version 10.2.0.1.0 On Windows 2003 Server Enterprise SP1. This job always fails with "ORA-01017 Invalid UserName/PW" even though the username and pw are correct!
Turns out the password itself is the problem, apparently some part of the process (RMAN??) does not like the special characters in the PW. Changing the PW to "testpw1" worked.
Using Oracle Universal Installer should have prevented me from using a password that violated this policy.
BG...Does you provide username under local security policy along with domainname like
abc\uo.cok ? If not, please enter username along with domainname and let me know the result. If possible aste eventviewer log for this connection -
Zfs-import-cache.service fails on startup
I have been using zfs for a couple of days now.
It's only for storage purposes, not for root system.
I installed it, and enabled zfs.target for startup, but since a couple of reboots ago, I noticed zfs-import-cache.service fails resulting in sometimes, the pool not getting mounted.
● zfs-import-cache.service - Import ZFS pools by cache file
Loaded: loaded (/usr/lib/systemd/system/zfs-import-cache.service; static)
Active: failed (Result: exit-code) since sáb 2014-07-05 23:42:21 CEST; 44min ago
Process: 174 ExecStart=/usr/bin/zpool import -c /etc/zfs/zpool.cache -aN (code=exited, status=1/FAILURE)
Main PID: 174 (code=exited, status=1/FAILURE)
jul 05 23:42:21 7thHeaven zpool[174]: Unable to open /dev/zfs: No such file or directory.
jul 05 23:42:21 7thHeaven zpool[174]: Verify the ZFS module stack is loaded by running '/sbin/modprobe zfs'.
jul 05 23:42:21 7thHeaven systemd[1]: zfs-import-cache.service: main process exited, code=exited, status=1/FAILURE
jul 05 23:42:21 7thHeaven systemd[1]: Failed to start Import ZFS pools by cache file.
jul 05 23:42:21 7thHeaven systemd[1]: Unit zfs-import-cache.service entered failed state.
Any idea why would this happen?
Thanks.Xi0N wrote:BTW, I'm trying to setup zed so it would send me an email on every event, but I don't seem to get it working. I installed and started postfix, but I still don't really know how to configure it so the mails get sent. Any tips?
You need to create a script in /etc/zfs/zed.d/ - see the zed man page.
Use the existing scripts in that dir for examples (e.g. scrub.finish-email.sh).
The existing scripts use /etc/zfs/zed.d/zed.rc; in that you need to set “ZED_EMAIL” to the email address to mail to in order to make the existing mailer scripts do something. Your script could instead hard code the email address.
cmtonkinson wrote:I've got a related problem I just posted about yesterday, I wonder if this busywait tactic would work in my scenario as well - although isn't there a way to do this with Require/After instead of an ExecStartPre wait script?
If you look at zfs.target et al, you'll see they already use Require/After/Before to order things. Xi0N's problem is not the ordering, but that the kernel module hasn't always created the zfs device when systemd runs the .service.
I use ZFS as my root, and the zfs hook runscript has a similar wait in it - so for me the zfs device exists by the time systemd runs the .service.
I don't know if your problem is the slowness of the zfs kernel modules or something else. My first port of call would be to check the journal for errors. -
Hello everybody.
I've a a problem when I want to apply the security changes to a community and all his sub-objects.
The "Async operation for ..." always fails.
That's what the log says :
Nov 7, 2006 10:23:52 AM- Starting to run all 1 operation(s) for job 'Async operation for Communication-Evénements'. Will continue on errors.
Nov 7, 2006 10:23:52 AM- *** Job Operation #1 of 1 with ClassID 20 and ObjectID 359 cannot be run, probably because the operation has been deleted.
Nov 7, 2006 10:23:52 AM- Done with job operations.
What is the problem ? I didn't delete the operation.
Thanks for your help.
Kind regards.ghxin wrote:
Hi. I had the same problem for the last few days. I just figured out that it seemed that something went wrong (didn't complete) in the 'Install Packages' step. Rerun this step immediately after the error and the install could continue normally.
Update:
I just realized that doing the above will NOT for sure solve the problem, but it's something to try. Anyway, you should see a lot of:
Installing a ...
Installing b ...
Parsing hook [...]
Parsing hook [...]
after the packages you select finish downloading. When the error in this post happens, I'm guessing you don't see these.
Correct, I read somewhere else that the packages not installing correctly (ie at all) is having the arch kernel already installed in /boot, although not the best solution, during the install I reformated my /boot partition and it fixed my error of none of the packages installing correctly. However if you do get the "failed to import network settings" and some of the packages have already been installed, try redownloading the packages again, and try a different mirror. -
Clip Proxies always Fail - move FCS to another Computer
I moved FCS to another new Mac Pro. Restore and UID conflict resolved with Terminal. Now all looks like here but when we start to Regenerate Proxies or Analyze we get the pictures (Poster Frames, Thumbnail Proxy but not the important Clip Proxy. Always FAIL, but compressor encode the File, but I can never see as a Clip Proxy. The logs shows the follow Error Message and I could not find here any answer.
Thanks for helping me.
ERROR: EREQERROR
Encountered error using Compressor: Error loading /Library/QuickTime/Motion.component/Contents/MacOS/Motion: dlopen(/Library/QuickTime/Motion.component/Contents/MacOS/Motion, 262): Library not loaded: /Library/Application Support/ProApps/SharedA/Frameworks/ProCore.framework/Versions/A/ProCoreHere's the fix.
On the Final Cut Studio 3 disk 1 find the following file:
/Volumes/Final\ Cut\ Studio\ Install/Installer/Packages/ProCoreA.pkg
this will reinstall the file you have missing and should restore the ability to regenerate proxies.
Hope this helps.
Nicholas Stokes
XPlatform Consulting -
FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
ThanksHi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) -
Find All Occurrences always fails within loop
Dear forumers,
There's this strange problem that requires a fix.
Finding all occurences of '#' works fine here:-
REPORT zz_test.
DATA: lv_text TYPE string,
ls_result TYPE match_result,
et_release type table of yytc_release,
lt_result TYPE match_result_tab.
lv_text = '"RFC-1234#Create ""Payroll"" under NL directory"'.
FIND ALL OCCURRENCES OF REGEX '#'
IN lv_text
RESULTS lt_result IGNORING CASE IN CHARACTER MODE.
IF sy-subrc = 0. " SY-SUBRC is always 0
READ TABLE lt_result INTO ls_result INDEX 1.
WRITE :'Offset: ' .
WRITE: ls_result-offset .
WRITE: lv_text+00(ls_result-offset).
ENDIF.
But it always fails here, within a loop at an internal table:-
SELECT * .... INTO TABLE it_jira ...
LOOP AT it_jira ASSIGNING <jira>.
<release>-summary = <jira>-summary.
IF <release>-type CS 'Subtask'.
" <release>-summary is of data type CHAR255
PERFORM get_subtask USING <release>-summary.
ENDIF.
ENDLOOP.
FORM get_subtask USING pv_summary TYPE yytc_release-summary.
DATA:
lv_string TYPE char255,
lv_final TYPE char255,
lv_summary TYPE string,
lv_strlen TYPE i,
lt_result TYPE match_result_tab.
lv_string = pv_summary. " LV_STRING = '"RFC-1234#Create ""Payroll"" under NL directory"''
CONDENSE lv_string.
lv_strlen = STRLEN( lv_string ).
lv_strlen = lv_strlen - 1.
IF lv_string+0(1) = '"' AND lv_string+lv_strlen(1) = '"'.
lv_strlen = lv_strlen - 1.
WRITE lv_string+1(lv_strlen) TO lv_final+1(254).
ENDIF.
lv_summary = lv_final.
" FIND ALL OCCURRENCES OF '#'
" IN lv_summary
" RESULTS lt_result IGNORING CASE. * SY-SUBRC is always 4 here too
FIND ALL OCCURRENCES OF REGEX '#'
IN lv_summary
RESULTS lt_result IGNORING CASE IN CHARACTER MODE.
IF sy-subrc = 0. " SY-SUBRC is always 4 here - why?! :(
ENDIF.
CLEAR: lv_string,
lt_result.
ENDFORM. " GET_SUBTASK
Only when the string LV_SUMMARY is edited from within the debugger (add space to the string prefix, etc), the SY-SUBRC will be 0 and there'll be data found in LT_RESULT.
How can I resolve this issue? Please do help. Thanks.I think the subtle difference is that in your first example the character is actually '#' whereas in the second example it is actually another (unprintable)value such-as line-feed and only APPEARS to be '#'.
You must find out what the value in question is(will it always be the same value?) and then replace that instead of '#'.
Maybe you are looking for
-
What is the line with a red marker on its left-hand end, in iCal's weekly view????
-
How do I add text to an output of a formula?
I've tried various scripts to get it work in "Simplified Field Notations". The script below is the only one that doesn't return an error, but I get no output. This one is without a formula script, but I would like to know how to add text to a formuls
-
Hi Guru! Need some help. My problem is to start MR22 with mass Materials and Amounts using also field KONGR-Revaluation Reasn. 1. I Was trying BDC, but it can be used maximum wtih 9 materials. When i try to put f.e. 13 materials, call transaction ret
-
Can you block private phone calls?
Im being harassed by a private number, if i change my number he finds it again. Can you block private phone calls
-
Constantly getting error 302 when trying to export release build
As the title says, I can't export a release build (any more) with Flash Builder 4.7 using AIR 3.5 (or 3.6 beta for that matter). The compilation process is immediately interrupted with error 302: Root content ... is missing from package. What can I d