N660 TF 2GD5/OC and DOS mode
I have Dell U2311H 23" FullHD monitor. With N660 TF 2GD5/OC in DOS mode (BIOS setup an so on) I don't have image extension to whole screen - there is 1.5-2cm black border around it. It is very strange because monitor shows 1920x1080x60Hz mode in menu.
Monitor is connected to video card by DVI-D. I tryed both DVI ports on card without difference.
Before I have used MSI NX8800GT-T2D512E-OC on the same system without such problem - there was full screen image for all video modes.
Video card BIOS v80.06.10.00.5E. I made BIOS backup - it is absolutely the same as can be downloaded now from MSI download page for this videocard (NV287MS222.ROM). Under Windows 7 card works fine.
Could you explain such behaviour?
Board: Asus P8H77-V bios v1103
CPU: Core i5 3470 (i don't use intel graphics at all)
contact msi at >>How to contact MSI.<< and see what they would say about it
Similar Messages
-
MOVED: N660 TF 2GD5/OC and Gaming APP error
This topic has been moved to Graphics Cards.
https://forum-en.msi.com/index.php?topic=256162.0N660 TF 2GD5/OC is no Gaming series vga and therefor does not support the Gaming APP. Only Gaming series vgas which provide the required profiles (like N660 GAMING 2GD5/OC) are supported. It is therefor normal that the APP reports an unsupported platform.
As no Gaming series vga is used thread was also moved to Graphic Cards section (from wrong section GAMING Graphics Cards). -
N660 TF 2GD5/OC and Gaming APP error
Hello!
I tried running the gaming app but it keeps giving me error "not supported in this platform". I have reinstalled it three times and I have also upgraded my graphic drivers.
On the graphic card box the sticker says as the title suggests "N660 TF 2GD5/OC". I can confirm it's the TF edition as the card has two cooler fans.
Windows display settings says my current BIOS version is 80.6.28.0.39.N660 TF 2GD5/OC is no Gaming series vga and therefor does not support the Gaming APP. Only Gaming series vgas which provide the required profiles (like N660 GAMING 2GD5/OC) are supported. It is therefor normal that the APP reports an unsupported platform.
As no Gaming series vga is used thread was also moved to Graphic Cards section (from wrong section GAMING Graphics Cards). -
Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.
Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox -
i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?
You run Windows in Parallels or Fusion. Then in Windows you install the program.
-
when i try to download a file from the internet it starts to download but when its finished it opens up in the app "text edit" and it says this file cannot open in DOS mode.
Can anyone help?It sounds like perhaps the file doesn't have an extension that the system recognizes. Is this all files, or just one specific one, and if so, which? What is the name (and extension, if it has one) of the downloaded file? What kind of file do you *expect* it to be? (PDF, or whatever). Renaming a file with the appropriate extension can often fix that kind of problem.
Matt -
How can I get my system in and out of DOS mode?
How do I get my system in and out of DOS mode?
There is no "Dos-Mode" in OSX.
Guessing that you tried to run an .exe file while in OSX ?
These are meant to be run in Windows.
Stefan -
I am trying to reinstall Windows (would not launch). I removed the partition and started over. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode." I was successful before, what am I doing wrong this time?
Try a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac -
I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help
What exactly are you trying to do? PVRs are for recording from TV not computers.
Either way, if it's complaining about DOS mode, it's Windows oriented software and not Mac compatible. -
GOP VBIOS for N660 TF 2GD5/OC
Hi,
Can you send me a GOP VBIOS for my graphic card ?
Model : N660 TF 2GD5/OC
S/N : 602-V287-04SB1210110609
ROM : mega.co.nz/#!Op1VAIIZ!-EUwNlX1IuYF2KP085NzxYxf6xMmOXzwDCMorrqeE0M
Thank you.Use the attached.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash. -
N660 TF 2GD5 UEFI Compliant VBios
Hi,
I have an issue with my N660 TF 2GD5 since I installed Windows 8.1 in UEFI mode, once I install the official Nvidia driver (whatever the version) I have a dark grey (~black) screen at boot; instead of login screen, sometimes I can see the cursor but I'm completely blocked. For bein able to login I have to uninstall the driver.
I guess that the root cause is that the VBios is not UEFI compliant, is it correct?
Moreover I have an issue when I try to dump the firmware:
NVIDIA Firmware Update Utility (Version 5.164)
Adapter: GeForce GTX 660 (10DE,11C0,1462,2871) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the
EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
My SN: 602-V287-050B1302041719
Any help is welcome!
GPRQuote
I guess that the root cause is that the VBios is not UEFI compliant, is it correct?
Doubtful as the machine would not even post if being set to UEFI mode but vga is not using a GOP compliant vbios.
Quote
Moreover I have an issue when I try to dump the firmware:
And what problem is it? Doesn't it continue saving? If Windows works without driver use gpu-z to save the vbios: http://www.techpowerup.com/gpuz/ -
[REQUEST UEFI GOP vBIOS] MSI N660 TF 2GD5/OC
Dear Svet,
Is there a ROM for my video card?
Model: MSI N660 TF 2GD5/OC
SN: 602-V287-050B1302029749
NVFLASH report below
NVIDIA Firmware Update Utility (Version 5.118)
Adapter: GK1xx (10DE,11C0,1462,2871) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
Image Size : 98816 bytes
Version : 80.06.28.00.39
~CRC32 : F75220C8
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK106 Board - 20300000
Product Revision : Chip Rev
Device Name(s) : GK1xx
Board ID : E307
PCI ID : 10DE-11C0
Subsystem ID : 1462-2871
Hierarchy ID : Normal Board
Chip SKU : 400-0
Project : 2030-0000
CDP : N/A
Build Date : 09/17/12
Modification Date : 11/01/12
Sign-On Message : GK106 P2030 SKU 0 VGA BIOS
MSINV287MS.204Use >>this<<
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash. -
[REQUEST] vBIOS for MSI N660 TF 2GD5/OC
nvflash doesn't like the backup of my original vBIOS for some reason.
Can I get a copy of either the original or latest vBIOS for the following please?
MSI N660 TF 2GD5/OC
S/N is 602-V287-190B1312000547
Thanks!Use >>this<<
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash. -
UEFI GOP BIOS - MSI N660 Gaming 2GD5/OC
Hello Guys,
Is there any chance for a UEFI GOP bios for:
MSI N660 Gaming 2GD5/OC)
SN: 602 - V287 - 35SB1311066671
BIOS: https://dl.dropboxusercontent.com/u/12123803/GK106.rom
Thank you,Quote from: flobelix on 13-March-14, 02:08:59
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash. -
Uefi Request for N660 Gaming 2GD5/OC
Hello and thank you for your support.Can i have a Uefi bios for my card please?
Model : N660 Gaming 2GD5/OC
Serial : 602-V287-35SB1311047893
Bios : http://speedy.sh/FQJw2/GK106.romOf course you can, use the attached:
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.
Maybe you are looking for
-
Adobe Premiere Pro 2.0 is unable to uninstall? 64 bit windows 8 laptop
I have Adobe Premiere Pro 2.0 on a 64 Bit Asus laptop running Windows 8 and I've been trying to uninstall and reinstall the program as it's been having trouble starting up. However, when I go to uninstall it, the wizard is interrupted and I get a mes
-
Please help - Photoshop won't open
Hi, I just bought photoshop elements, installed it and everything was fine. Like a dope, I downloaded a graphic from a website, and tons of adware/malware was also loaded on my computer. I couldn't stand all the popups and junk, so i used the Dell
-
How to recover "Recovered Items" after upgrade to Mavericks
After upgrading to Mavericks (from Mountain Lion), I had to create a new user. Then, after logging in, I noticed my Applications and users were missing. After some searching in the Terminal, it seems all the items are in "Recovered Items". It's as if
-
WorkFlow for Training & Event Mgmt .
Hi SAP-HR Experts . I am badly stuck in a issue regaring Event & Training Mgmt . Issue is : There is training calender for a whole year , different - different training programs are schedules there . Employees Books himself/herself for a traing progr
-
Hello, I am using an NI-1433 board and can communicate with my JAI camera and use power over cameralink (PoCL) to power the camera. I would like to turn this on / off so that the camera is only powered when the software is running. Can this be done?