N660Ti PE 2GD5/OC BIOS Setup access problem!!

I have some strange problems with my new MSI N660Ti PE 2GD5/OC installed.
One issue is that the system stucks for about 2 minutes at the bios selection screen Press <DEL> or <F2> to enter Setup. Press <F7> to enter boot menu. and after that Windows starts without problem,but if I try to enter BIOS Setup as result I got Blank screen and need reset system.
The second issue is I was also unable to select the boot menu (F7) at the screen Press <DEL> or <F2> to enter Setup. Press <F7> to enter boot menu. but I belive there a connection with the first one.
My configuration:
System: Shuttle XPC SZ77R
Memory: G.Skill [ TridentX ] F3-2600C10D-8GTXD (2x4GB module)
CPU: Intel I5-3570K
HDD: Kingstone SSDNow V100 64GB
GRAPHICS_CARD: MSI N660Ti PE 2GD5/OC (bios 80.04.4B.00.57) (SN 602-V284-050B1209008041)
OS: Windows 7 Ultimate 64Bit
Please HELP ME.

Quote from: newmark on 28-November-12, 02:36:18
Svet,
at the link below you can find the image PSU Label with the info you need
http://www.filedropper.com/psuspecslabel
ok
Quote
The current vbios below:
http://www.filedropper.com/orig660ti
reflash vbios to attached one, then see how its goes

Similar Messages

N660Ti PE 2GD5/OC bios update

Hi,
I recently bought a N660Ti PE 2GD5/OC card , serial number : 602-V284-09SB1208007979
And i tried to update the bios through Live Update 5 but when i tried to check for update using the program, nothing happens.
It does not seem to detect my current bios version or any newer bios version. I'm currently on windows 7 64bit.
Can you please send me the latest bios for this card?
Thanks.

what's current vbios version installed? save it with nvflash http://www.techpowerup.com/downloads/2133/NVFlash_5.118_for_Windows.html
syntax: nvflash -b myrom.rom [enter]
then upload vbios somewhere and give a link to it

MSI 845GVM-V no Bios setup access

Hello.
I bought a MSI Intel 845GVM-V motherboard.
a Celeron 2Ghz 478pin 400MHz Processor (product code BX80532RC2000BSL6VY)
and 256MB DDR400 CL2.5 RAM
Powersuply are marked and tested as aproved for AMD and Intel
I have put toghter quite a few similar motherboards and computers before, but not with this type of motherboard and combination.
I'm stuck in something that might be an intenal error. But it's a good thing to ask here first before i return it as faulty.
I have double checked all the istallations.
When I start power it up then all I can see see is the 8Xtreme series start up info screen.
Pressing Del to enter the bios setup gives no responce. Only ctrl-alt-del to make a reboot works.
And there are No warnings beebs during start up.
Any clues from any one what I can do to trouble shout this problem?
Does any one know where to get or buy some good analyse SW-tools to trouble shout this type or similar type of problems?
Or
Other kind of problems when the Bios seem to work ok but there are other OS or HDD related problems.
Thankfull for answers.
Best regrds
Tony__

One odd thing that i think solved the problem.
I tried to use a boot up CD.
Same behaviour , all freezed at the 8Xtreme series start up info screen.
But when I open up the CD-rom to remove the CD then the Bios screen pops up.
Bios info: IDE primary slave = MATSHITA CR-591 (check strap = slave ok)
I tried to re-connect the CD-rom as master on IDE bus2. No change same behavior.
dis connect it from any IDE bus and power makes bios to be accesable and HD to work as normal.
even if it might be needed , here are some more info.
Matrox MPT-301 power supply
http://www.casing.com.tw/product_files/2_22_MPT-301_spec.pdf
Thanx for your help Danny. Think I need to find another CD-rom.
Still searching ,, so
If you or any one know about some well working trouble shout programs for a varity of PC , bios , Hd or OS related problems please give me a note.
Regards
Tony__

[Z68MA-G45 (B3)] Gaming Rig - Overclocking and UEFI/BIOS Setup access

hey guys i just had a new game rig.
MSI Z68MA-G45 (B3)
INTEL CORE i5 2500k
Cooler Master silent pro modular 80plus 1000w
Cooler Master V6GT
Cooler Master 690 II advance ( USB 3.0 version )
G. Skill Ripjaws 1600 (4x2) 8gb
EVGA GTX 580 SC
just wondering how can i overclock my CPU w/ this rig coz i cant see any threads regarding this mobo, also i cant open up the BIOS of my system i have a windows 7 64 bit ultimate. hoping for some good advise.

Recommend to do all the bench tests at the original auto/stock/default settings, then you have something to compare later results with. In Reply #10, I have given some basic pointers at which to start. Soon as CPU V. is taken out of auto, you will lose any power saving advantages at low use & idle. Another quick & dirty way to do it is to set the CPU V. at the industry recommended maximum of 1.400v's, & start to increase the CPU Ratio up one step at a time until it fails to boot the OS. Keep in mind, load overshoot will usually spike the VCore past the 1.400v's at times in varying amounts. For gaming, OC'ing RAM is a wasted effort. After extensive testing, it made almost zero change in gaming performance on it's own.
https://forum-en.msi.com/index.php?topic=147704.0
There is a lot of information in this thread that may be of use. This is basically one of the alternative ways to OC;
https://forum-en.msi.com/index.php?topic=146272.0

N660Ti PE 2GD5/OC fans @ full throttle at startup

Since a few days I have the N660Ti PE 2GD5/OC and all is running very well
But I have used MSI cards for years and the is the first one that is at full fan throttle when my system starts up. Only when Windows 8 Pro 64bit is running, the fans throttle down. It's not really a big issue I think, it's just a bit louder when starting up and then it gets quiet.
But just to make sure I want to find out if this is normal for this card?
MSI N660Ti PE 2GD5/OC
BIOS according to GPU-Z: 80.04.4b.00.16 (P2400-0001)

Quote from: badboy2k on 27-May-13, 22:00:18
the dust removal spins the fans in reverse at full speed for 30 seconds to pull any dust out the fins to keep then clean then it reverts to normal direction operation after that and runs on the standard temperature Dependant curves... just so you know how it works!
Yep, that info is what I found hidden below the flap on the box. Found that by accident. Think it's also info that should be mentioned on the MSI site with the specs of the card? Can imagine that more people are not aware of the hidden info under the flap (I never thought of looking there) and are wondering why that sound of the fans is there when starting up.

HP Pavilion DV6-3029tx Cannot Access BIOS Setup

Hello there, I have used this laptop for nearly two years, if I remember correctly.
Basically, the problem is that I want to disable Function key, but I cannot access BIOS setup.
I have tried every combination of keys at start-up screen, from ESC to F10, none of them worked.
So I thought maybe an BIOS update can solve the problem (My current version is F.07), I downloaded firmware from HP support site and run it, know what, the screen flashed and system get restarted, but nothing had changed, I didn't get even an error message.
The problem is actually found by a HP supporter when I send my laptop for cleaning last year, he didn't manage to fix it at the time and problem became devastating for me lately because certain software I am using rely heavily on function keys. The only things "big" I have ever done to my laptop were updating windows 7 Home to Ultimate (32-bit) and partition, I am not sure if they were the reason.
The following is InsydeFlash log, I searched the error code and find somebody with similar problem here: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Pavillion-DV6-3125er-BIOS-UPDATE-Error/t...
--- Log started: 2012/04/18 17:30:15
Initializing...
Log file       : I:\SwSetup\SP55299\InsydeFlash.Log
Settings file : I:\SwSetup\SP55299\platform.ini (found)
Executable     : I:\SwSetup\SP55299\InsydeFlash.exe
    Version    : 4.0.4.0    Build      : InsydeFlash
    Date       : Fri Oct 15 14:25:12 2010
Resource file : I:\SwSetup\SP55299\iscflash.dll (loaded)
App name       : InsydesFlash
OS Information : Microsoft Windows 7 Service Pack 1 - supported
Preparation stage
IHISI Version : 193
    Error code : 3010(0x00000BC2)
Cleanup Stage
    Stage Completed
--- Log Stopped: 2012/04/18 17:30:16
--- Log started: 2012/04/18 17:38:11
Initializing...
Log file       : I:\SWSetup\SP55299\InsydeFlash.Log
Settings file : I:\SWSetup\SP55299\platform.ini (found)
Executable     : I:\SWSetup\SP55299\InsydeFlash.exe
    Version    : 4.0.4.0    Build      : InsydeFlash
    Date       : Fri Oct 15 14:25:12 2010
Resource file : I:\SWSetup\SP55299\iscflash.dll (loaded)
App name       : InsydesFlash
OS Information : Microsoft Windows 7 Service Pack 1 - supported
Preparation stage
IHISI Version : 193
Device Name:\Device\HarddiskVolume1
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume3
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume4
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume5
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume7
SearchVolumeFileAndCreateDirectory
Sign File Name:\\?\Volume{5ab76131-9b4b-11df-90b9-c80aa990af36}\\Hewlett-Packard\BIOSUpdate\HpBiosUpdate.sig
Sign File Name:\\?\Volume{5ab76131-9b4b-11df-90b9-c80aa990af36}\\Hewlett-Packard\BIOSUpdate\HpBiosUpdate.EFI
Device Name:\Device\HarddiskVolume2
SearchVolumeFileAndCreateDirectory
Device Name:\Device\HarddiskVolume6
SearchVolumeFileAndCreateDirectory
Device Name:\Device\CdRom0
Device Name:\Device\CdRom1
Allow Version: B.0D, Dex: 2829
Current Version: F.07, Dex: 3847
Current BIOS version is bigger than the version setted in Ini.
Partition : 1 WMI 0x0D: 1
Check Package : 1
BIOS sign : 1
File sign : 1
    Processing parameters...
        Image file     : I:\SWSetup\SP55299\01448F29.bin
        Backup file    : No Backup file
          OEM ID       : 0x103C
    Loading new BIOS image file...
        Opening file I:\SWSetup\SP55299\01448F29.bin
Not sign file
g_dwEcSize : 0x00080000
Reading 4194304 bytes from file starting at      0 ...
        BIOS image size : 4194304 (0x00400000)
ECSize : 0x80000
    Error code : 3010(0x00000BC2)
Cleanup Stage
    Stage Completed
--- Log Stopped: 2012/04/18 17:38:20
Thanks for your help.

Nevermind, I deleted the HP_TOOLS partition and problem solved, this may help those who have similar problem.

Satellite 1400-103: Cannot access the BIOS Setup

I'm having problems getting into the BIOS setup. At the 1st bootup screen I press ESC key then message appears Check system. Then press F1 key. Once key is pressed it doesn't take me to BIOS setup and laptop reboots. Any help will be much appreciated.
James

No it doesn't. There is a problem with the OS and I was gonna do a repair using an XP disk. I have been trying to boot from cd rom by pressing C button and I've also tried pressing F12 key to change boot device. The teacher whose laptop it is has put a bios password on bootup but I'm assuming this shouldn't affect bootup or accessing the bios setup. I'm not sure if it's a supervisor password or administrator password.

Bios Request N660Ti PE 2GD5

I just noticed this perhaps after having my PC for 3 years. I don't know when this problem started but I need it fixed. Only one of my fans are working unless I use Afterburner and change fan speeds to 85% or higher. I read somewhere that updating my bios might fix it but Live Update 6 isn't working.
N660Ti PE 2GD5
S/N: 602-V284-10SB1208058673
Also I don't know how to Flash the Bios so please give me some instructions.

there is no updates.
only GOP UEFI vbios is available, attached below if you wanna flash it
220.rar (114.95 kB - downloaded 10 times.)
for flash guide:
Quote
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash

Statellite C850-F0055 F12 key doesnt access Bios setup

Statellite C850-F0055 was failing to boot.it was saying check media (fail).
i then change the boot from normal to fast boot.Since then, its saying
"NO bootable device---- please restart system"
When i press F12 key at booting it doesnt bring the bios setup.
how do i change it back to normal from fast boot so it can bring bios setup. please help.

>When i press F12 key at booting it doesnt bring the bios setup.
This is wrong key. You have to press F2 in order to access the BIOS.
By the way: even if the fast boot would be enabled, the unit should find the HDD and should be able to boot up the Windows system. So I guess its not a problem with the fast boot switch but probably the HDD isnt OK.
I recommend you to access the BIOS (F2) and to check if HDD is visible on the first BIOS page.

Can't access BIOS Setup on my Satellite C660-24F

I cant access my laptop Bios Setup - when I pres F2 , F11 or F12
*Satellite C660-24F PSC1NE*
It only statup Windows I cant access BIOS startup menu. I searched for BIOS updat for my model Satalite C660-24F - PSC1NE - and I didnt find on this web.
Can anyone help me please?

Hi
The BIOS for this unit can be found on Toshiba EU driver page:
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
Currently it looks like the BIOS 1.50-WIN is the newest one.
According to BIOS access:
Press F2 while powering on the unit. This is the right and only method to access the BIOS. Press F2 several times in the row

Problem with new MSI GTX660Ti N660TI-PE-2GD5/OC

Hi , I've just bought a new MSI GTX660Ti GPU from amazon , i was previously running the on board HD4000 graphics from the Intel I7 3770K CPU.
When i plug the new GPU in and reboot - i get the 'GIGABYTE' splash screen on my monitor , and it just hangs there -I am unable to enter any of the options and pressing DEL , F8 , F12 etc gives no response.
I've installed all the drivers , and i simply switch off the PC , installed the graphics card , take the DVI cable out of the mobo socket and plug it into the GPU socket then switch on.
The bios beeps once , the display remains frozen on the splash screen for about 3 minutes , then another single beep from the bios and the display remains frozen on the splash screen for another4 or 5 minutes , then eventually the screen goes black , with just a single flashing underscore. No keyboard inputs make any difference.
re-booting just gives the same result.
BIOS settings are all at default Including > Init Display First - Auto , Internal Graphics - Auto
So , is there something that i'm doing wrong or is the new graphics card DOA ?
Please help
Many thanks
Lee
MoBo: GA-Z77X-UD5Hv1.0 Bios version - F8
CPU: CORE I7 3770K
Power Supply:Coolermaster Pro 600W modular PSU
Ram: G.SKILL Ripjaws Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333
Samsung 256GB SSD + 2 x Seagate 2TB HDD's
Video Card: MSI GTX660Ti N660TI-PE-2GD5/OC

Success !!
That seems to have done the trick , New GPU installed & everything appears to be working as it should now. I feel such a squid for not checking for BIOS updates !
oh well , all's well that ends well . Thanks very much for you help (and your patience !)
I really appreciate it.
Lee
MoBo: Gigabyte GA-Z77X-UD5H Wifi. Bios version - F14
CPU: Intel Core i7 3770K 3.4GHz Socket 1155 8MB Cache
PSU:Coolermaster Pro 600W modular PSU
GPU MSI GTX660Ti N660TI-PE-2GD5/OC Driver 314.07
Ram: G-Skill 16GB (4x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V
Samsung 830 256GB SSD + 2 x Seagate 2TB HDD's

[Help] UEFI BIOS For N660Ti PE 2GD5/OC

Hi, I need help !
can you give me UEFI/GOP bios.
Thank you !!!!
Model: N660Ti PE 2GD5/OC
S/N: 602-V284-050B1304011912
bios link: ***http://pan.baidu.com/share/link?shareid=666279&uk=1343606442***

Done. Thanks

Request BIOS for N660Ti PE 2GD5/OC

Please, I would like to request GOP/UEFI BIOS for N660Ti PE 2GD5/OC
SN: 602-V284-09SB1208159221
BIOS: h_ttps://www.dropbox.com/s/kqpsvvj81vqp1kx/GK104.rom
Thanks in advance.

Use this one: https://forum-en.msi.com/index.php?action=dlattach;topic=165133.0;attach=10668

Problems with BIOS setup in Supervisor Mode

QuestionI can't seem to change any of my BIOS settings - even though at one point I had set a bootup password.
If I press the Access IBM mode and F1 consecutively, I can enter the BIOS Setup. Yet it seems that I can't change anything - not even date or time. All menus say "If any items require changes, please consult your system Supervisor." on the right, but who would that be?
In all (sub)menus, up/down buttons have no effect, all else beep, only Esc works. Just in long menus, such as Config/Power, do up/down have some effect: They scroll, but won't select anything. In the Restart menu, I can only confirm "Exit Discarding Changes" but choose none of the other options.
AnswerTo unlock the BIOS, power off your laptop or system, then switch it on again.
Press F1 when you see the message about pressing the Access IBM button, and enter the Supervisor password, followed by the Power On password, if they are different.
Tip: If your bootup password is more than seven characters long, type only the first seven to acces Supervisor mode.

Where do i get a password from?

Accessing RAID BIOS Setup on K7N2 Delta-ILSR

Dear All,
OK, OK, OK, so the message title does not make much sense... I wanted to include all the useful words.
I have a brand new motherboard, as above and I have put a drive onto IDE 3 (yes, you can do this - just have one drive on the SATA RAID, I have found that much out - it is described as a 0+1 RAID set) and I want to set it up to work!
All that happens at the moment, is that the SATA BIOS scans the channels for the RAID and does not find it. Then it goes on, saying that the BIOS is not installed.
I am supposed to press Ctrl-F to go into the BIOS setup, but when I do this, it ignores me - have tried pressing from just after the POST and I have tried resetting the BIOS, to no avail!
In the manual, it says that when you start the machine up first time, it will tell you to press Ctrl-F to go into the setup or Esc to continue. I cannot believe that you can ONLY setup the SATA once, at first startup?
If it is ONLY at first startup, then when is the definition of "first startup"? I have tried all things to reset the motherboard and they do not work:
1. Shutting down the machine
2. Removing the power supply connectors
3. Reset the BIOS w/J11
4. Removing the backup battery
5. Removing the backup battery and resetting the BIOS w/J11
6. Removing memory
7. Removing drive cables
8. Reflashing the BIOS
Anyone got any other ideas?
Thank you all, in advance.
Leni

Thanks for the help, guys...
The RAID setup was OK. I was advised to backup all the data on the drive before doing this, which I did. I just used "Auto" to include this drive as an ordinary drive on IDE 3. After, I had a look at the drive and nothing seemed to be different. I have used a RAID card (it was cheap) - HPT370 - as an ordinary IDE card and that was a bit simpler. The HPT370 just scans and finds the required drives and they are there.
Incidentally, I did look at the diag's on the top of the drive and I do not remember it saying anything about differences between Master and Single drives. No harm done(except losing 4 hours of MY LIFE)!
Incidentally, drunken_rice I am not using the RAID as a bootup drive. Although I did not lose any data myself, I would suggest that you backup your data before adding your drive into the RAID (I was advised of this before) - just in case!
Regards,
Leni

N660Ti PE 2GD5/OC BIOS Setup access problem!!

Similar Messages

Maybe you are looking for