N70-1 Memory Problem[Help!!]

hi.. i just bought N70-1, FirmWare :
v5.0609.2.0.1
01 March 2006
RM-84 MCU SW
everything is fine & excelent, but i got a problem with my memory, after i remove my memory card, then insert it again, my phone can't go to menu any more. how can i solve this matter? can any one tell me? thanks in advance...

lol... dare I suggest that you just don't remove the card?
Have you tried formatting the card and starting from scratch with it... not sure how that will help, but worth a try... make sure everything's backed up from it first as you'll lose everything.
The only other things I'd suggest are resetting the handset (make sure it's all backed up first), and if that doesn't work, take it to your nearest Nokia Service Centre and see if they can help.
This isn't something I've experienced on mine, so it could be something that's fixed with a Firmware update - if that's what you need make sure everyhing's backed up before you go, as you'll lose everything again.
Also, if you go for the firmware update option - get things backed up individually rather than a backup to memory card, as restoring that can restore some problems too. So get your contacts, images, tones, tracks etc, then put them back on seperately once it's done.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

Memory Problem Help Pls

hello i have problem with my memory i have this matherboard p4 MSI 875P NEO - FIS2R <SK-478> i have 3 memorys 2X 256 <pc3200> and 512mb <pc3200>
i poot them in the sllots starting from left
1> 256mb
2> 512mb
3> 256mb
4> ------
coz dual ddr
i open the pc... after 2-3 howrs it crush... when i remove 512 it stop crushing... what is the problem? a friend told me to buy 1 more 512
1> 256
2> 512
3> 256
4> 512
or must be all 256 mb?
1> 256
2> 256
3> 256
4> 256
HELP ME PLSSSSSS < my english is not very good >

Set your DDR power voltage to somewhere between 2.65 and 2.8.
Test your ram with Memtest86
You don't need to put ram in all slots.
If this doesn't solve your problem, post complete details on your system, including power supply info. See the Moan Guide

Memory problem please help Idmediently

Hey guys, Ive got an ipad 3 (16gb) and I had a look on my memory i have a few games and apps (GarageBand, keynote, imovie, pages, monoply, game of life and a few others) and it said 12.2 gb used and 1.2gb available i think that's counted wrong and I know approx 1000mb is 1gb it's impossible what do I do to get it accurate, even my brain holds more memory than that! Please help ASAP also I've tried restarting it
Here is a list of apps:
GarageBand 696mb
Imovie 531mb
Ibooks 366mb
Keynote 362mb
Numbers 336mb
Pages 311mb
And 52 apps are 150mb and under
I know that I had the same number of apps yesterday and the memory was 8.2gb I want it to be accurate.
Reply ASAP.

Centipedee, No memory problem, you don't have enough room. It can take at least 2 times the required memory to load an app to the iPod. Once it loads it only requires 1.8GB of memory space but to get it there you'll need at least (maybe more) 3.6GB of space, I know it sounds screwy but it's how it works. Hope this helps, Good luck.

Help with 655 Max and Possible Memory Problems...

Just recieved my 655 Max and have put my system together, but when I turn it on it makes a constant beeping sound. I tried taking out both memory sticks, lol, and turning it on and the sound stops, I tried putting in one memory stick and the sound starts again.
I suppose this is a memory problem.
by the way I am using Corssair 256mb CMX256a-3200C2 memory.

[The alarm that you are getting is the CPU Fan Alarm you will have to diable it in the Bios. I am using a Vantec Aeroflow heatsink and my CPU alarm also is constantly on and was very annoying till I disabled it. My system still doesn't boot to XP yet as I have RMA'd bothe the MB and Ram. QUOTE]Originally posted by TritonB7
Hey Kaiguy the comp does continue to make sounds till I shut the system off. And I'm not sure how a standard pc tone sound would sound like, :(. But it does make beep followed by a lower pitched beep, and it repeats this till I shutdown the system.
(1) I cannot Access Bios.
(2) I have two sticks of Corsair 256mb CMX256a-3200C2 memory. I do not have any other ram available that will be compatible with this motherboard. Ive tried using one stick at a time in each of the slots. No Luck.
I highly think that both sticks not working is very unreal.
(3) and reseting bios by the jumper isnt working either.
I can probably try buying some diffrent memory, or returning the whole mobo and exchanging it for the same one.
By the way on my monitor when i turn the comp on it says 8x Extreme or something close to it while the comp is beeping. I doubt that, that has anything to do with it. This is my first MSI board :( , I've always been an Asus person but Im still open for MSI i'm sure I just recieved a faulty board.
[/QUOTE]

Nokia C5-03 Low memory problems ( Other Files )

Please help. I have a nokia C5-03 the handset is showing phone memory is full. I have checked and uninstalled all unecessay applications. But problem is still there. when i check the phone memory it indicates that i have other files of 42mb installed and using phone memory. however i am unable to check what other files are installed or classfied as other files. Can you please assist me so i can know what these other files consist of or where they are located.

Hi Thetao,
I typed a more extensive reaction before, but it got lost when I pressed "post". Therefore I just respond to the main points that you mentioned (and some I found out myself).
Strange: I can't find the 40 MB Maximum User Storage on the Nokia website anymore (nor the 75 MB). But it sounds very familiar to me. It looks to me as if they removed this from the phone specs, also of other Smartphones by the way.
Yesterday, I deleted some small apps that I don't use (anymore) such as InternetRadio and I also removed Nokia email. Although the apps were below 2 MB together, this freed up over 7 MB of Phone memory (24 MB free now)! I think there were still some old emails stored in C: which I couldn't delete any other way. This helped me a great deal already but I tried your suggestions as well.
1. No map data or CITIES folder on C: 2. Switched messages memory to phone (and phone to offline mode) and I did indeed find a forgotten email account with 30 email messages. Not much but I had 24,7 MB free after that. Of course, I put messages memory back to the memorycard. 3. Used the free edition of Y-Browser to manually delete the cache folder. Not much data in that, but 25,1 MB free after that. Nice tool, with which you can reach folders that normally stay hidden! Used YBrowser to search all C: for files over 300 kB. Only 2 files: boot_space.txt in C:\ (500 kB, contains only the X repeatedly as far as I see, but is probably essential for the operating system) and C:\resource\python25\pyton25.zip (1 MB). It looks like an installation package, but I'm not sure if I can delete it. By the way: YBrowser hasn't made a shortcut in one of the menus. Only way that I found to start it was to look for it using the Phone's search function. Is there a way to make this shortcut myself?
4. Yes I did. No Images folder on C: anymore, nor other big files (see point 3)
5. I use Bluetooth for file transfer sometimes, mainly for installation files (such as YBrowser.sis, but I did this one via USB-cable). However, no big files are left on C: so I don't think I have this problem.
6. I tried to delete Nokia Chat yesterday as well (with the other apps), but it won't be uninstalled the normal way as it says "Uninstall cancelled" (not sure about the exact translation since my phone 'speaks' Dutch) Do you know if there's another way to get rid of this 3 MB app that I don't use at all?
I think I may have found an explanation and a solution for the memory problem while navigating. You mentioned the "memory in use" in the map settings. Above that option there's a slide bar for the % of memory that the navigation can use. Standard is 70%. I always thought this was about storage memory on (in my case) the memorycard. Another topic mentioned that this the working memory (so the RAM) that the navigation may use. Setting it to 70% means there's only 30% left for other apps that run in the background. The other topic states that this is nog enough so the slider should be set to for instance 30% for navigation leaving 70% free for "the phone". From behind my computer, navigation seems much more stable. I'll try this setting in my car soon and let you know how it works.
Thanks a lot for thinking along with me so far! There's already 25,1 MB of space, which is great since it was only 7 MB last Sunday. And navigation looks more stable. I'd appreciate if you have some more answers to my latest questions, but if not I think my phone will work a lot better already!
Regards, Paul

Memory problem with 5330 XpressMusic

Hi,
I seem to have a memory problem with my 5330, I have a 1Gb micro disc installed. My son sent me a photo from his phone, when it arrived I got a warning on the scren that 'there is not enough memory to receive messages', I have tried to delete as much as I can, a lot tells me I can't delete it, but I still get the same warning. This warnig shows up each time I switch on the phone. How can I get myself more space? Can I move things from the phone memory to the memory card?
Gerald
Message Edited by warmbells on 01-Nov-2009 06:19 PM

Are you sure you're using a 5330 XpressMusic? Or is it a 5320 XpressMusic? The former is yet to be released, AFAIK.
Assuming that you are using a 5320, try these steps:
-> Move all photos, music, videos stored in the phone memory to the memory card. You can use the built-in File Manager to accomplish this.
-> Delete all files that you would've received via bluetooth, present in your Inbox. You can save them to the mass storage.
-> Clear the browser cache.
-> Clear the Sent Items folder.
-> Make sure you don't have too many messages in your inbox.
Hope this helps
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Memory problem with my Nokia 3220

Hi,I am new here and I have a memory problem with my Nokia 3220.I deleted all of my stuff in galery exept the BlueSquare theme and Nokia Tune but it says that i only have 483kb free memory and galery has 1,7mb memory taken. What should i do ?...I hope you understood my problem and i hope you can help me!
Shibuy
Thank You!!

I have the same problem recently. I bought my nokia 3220, 3 years ago and all was ok but now I download some free themes from a web site and suddenly I realized that my cellphone has less memory. In the phone options says that I have 2,2 MB in my Gallery when actually I have only 800 KB in my Gallery. I don't know what happen!! Maybe it's a virus or what is the solution?? Can I restart the cellphone ?

An error occurred when processing the spool request. (Possibly due to memory problems)

Hi SAP,
My backgroud job is failing with log as shown below
Job started
Step 001 started (program ZMRS0065, variant SUS
Step 002 started (program ZDRS0090, variant SUS
Step 003 started (program ZFRS0305, variant SUS
Step 004 started (program ZFRS0300, variant SUS
Access error
Job cancelled after system exception ERROR_MESSAGE
An error occurred when processing the spool request. (Possibly due to memory problems)
Kindly help out in this issue
Regards
Mohammed

Hello Mohammed,
Have you seen any error in your SM21 system log and developer trace of spool work process
during that time?
The maximum size when create spool is 2GB.Pls also check if you are creating a spool
larger than it.
Best Regards
Jie Bai

R9.2.0 on RH 7.3: Memory problem: Linux or the Installer?.

Having the following problem. Perhaps someone had the same. In that case, please help.
I have P4 with 1GB of RAM and 2GB of SWAP. No disk space problem. No shared memory problem. I installed the Client of Oracle9i (9.2R2) on redhat 7.3 (standard installation as Server). I have already noted here that with the Oracle installer running, the system uses almost all the RAM available (99.5% of the total), but at least it can conclude the installation. However it never uses the SWAP (100% free).
When tried to install the Database (enterprise or standard), the installation continues as long as there is RAM available. When reached 99.6% of the total used, it does not give any response (it hangs at 41% of the installation). Even here no SWAP portion is used.
Is there a problem of the kernel dispached with Rh7.3 in using the swap? does Oracle Installer really needs so much RAM? or am I missing something in the installation process of the Database? I am using jdk-1.3.1_04 downloaded from the sun website.
I would appreciate if you cc your response also to [email protected] I may have problem to access the Forum in the coming two days.
Thank you in advance.
Jama Musse Jama.

Check the Support Matrix (if you can find it) and it will tell you that Redhat and most Linux are not supported. I bought Redhat 7.3 Professional , a WinBook with lots of disk and speed and tried to get 9.2 to run on it. no way. It's not certified so it's not supported. Even though I explained that what I was trying to do was get rid of Windows XP and move to RedHat 7.3 and would they send me Oracle 9.2 when it was available. I got the CDs 3 days later. but it won't work. Now I am left with the choise of buying the 9AS package or going backt to XP.
I do not thing that Oracle is living up to the spirit of LINUX. They say Linux but they mean a very specific subset. Who do they think they are, Bill Gates?

Apex Memory Problem

Sometimes, when I open page with report I receive the next error.
report error:
ORA-04030: out of process memory when trying to allocate 123404 bytes (QERHJ hash-joi,kllcqas:kllsltba)
After redirecting, everything looks correct.
It makes some troubles for end users.
Any ideas.
Best Regards, Kostya Proskudin!

Kostya,
Do a Google search for the error message (ORA-04030). You get a ton of hits, all dealing with memory problems. Perhaps one of those will describe your environment so you can allocate more memory.
Hope this helps.
Bill Ferguson

X3-02 Memory problem!!! URGENT!!!

Hi.My XX3-02 is facing very serious memory problem.
After i changing the memory status of my phone,my frens all can't sms to me.They all found tat my msg memory is full and they couldn't send msg to me.
Wat's wrong wif my phone?
can anyone help me wif tis??

Can't seem to solve this with my X3-02. Just got myself an iPhone4. No more Nokias for me this time on.

Sound Problem Plus Memory Problem

I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't break any rules, didn't see anything in the listed rules thread. So here it goes.
Ok I'm having a few minor but very perplexing and annoying problems. I have recently built a new rig to include the following.
Windows 7 64 bit Home Edition
EVGA P55 FTW Intel P55 Socket LGA56
Intel Core i5-750 2.66Ghz 8M LGA56 CPU
Corsair Dominator 4GB DDR3 PC2800 (2 x 2 GB sticks)
Ultra LSP750 750w Power Supply
Seagate TB Serial ATA HD 7200/32MB
Cooler Master HAF 932 Full Tower Black Case
Galaxy GeForce GTS 250 52MB PCIe x2 (SLI Setup)
BFG - NVIDIA GeForce 9800 GT GB GDDR3 PCI Express Graphics Card (Physx Setup)
PROBLEM ONE:
This one I had a lot less that I was able to actually try because it just confused the crap out of me. So I started by going to test my sound. I'm running an optical cable from the on board sound port to back of my sony surround sound system. I get sound from my left and right channel but nothing from the center, rears or sub. So figure no biggie just need to change the configuration from 2 speaker stereo to 5. surround sound. Guess what... the option isn't there? WTF? A sound card with an optical port with no 5. support? So went online found the drivers for the sound on the mother board and tried reinstalling thinking maybe somthing was wrong with the drivers on the CD. Well it still didn't work. So I figured what ever, I got an external sound card that I know works with Windows 7 since it was on other desktop and hooked it up. Its a Creative - Sound Blaster X-Fi Surround 5. External USB Sound Card. Well it installs fine and I go to test it. Yep you guessed it! Still only sound from the left channel and the right channel with no option for surround sound. So I was able to find updated drivers for that and ran em. Well now I have an option for Surround sound with side speakers only no rear. Oh but it doesn't really matter because the left and right channel are still the only ones able to produce sound. And yes the speakers work I turned on my X-Box 360 hooked up to the same speakers and LCD tv and played COD4 with full sound working fine. So something else has to be happening I just have no idea.
PROBLEM TWO:
The second problem was with the memory. Everything booted fine but it initial only detected 2 GB. By the way I had them installed in slots and 3. So I shut down and popped em out checked the copper connectors everything looked fine and reseated the chi
ps.
This time during the boot up I checked the BIOS. It saw all 4 GBs of memory. Continued into Windows. Windows now saw all 4 but only .99 GB was available. Now the only other time I've seen anything like this was with on board video sharing the memory, and even then it wasn't half of the systems total memory. I then tried shutting down and putting the chips in 2 and 4 just see what would happen. Well I got an EA post error on the LED, couldn't even boot. So I figured o'well power down completely and tried to run the memory in 2 and 3 to run it out of dual channel. I was able to boot but still had the same issue. .99 GB available and still saw all 4. At this point it was just getting silly so I figured ok I'll download the new BIOS with my laptop, burned it to a CD. Booted the desktop and ran the BIOS flash. Update seemed work fine, honestly the BIOS didn't look much different and I didn't take note of the previous version before I did it so I can only assume it worked. However it did not fix my problem. So I'm still stuck at windows seeing 4 GB of memory with only .99 available.
Anyway... I'll keep trying to get this working and hunting around online, but I'm really hoping you all have some ideas. I'll be trying to call EVGA today for some help too and possibly Corsair. Thanks in advance for the help!

Hello,
cannot help with the sound problem.
For memory, I've got almost the same thing but with 4 sticks of 2gb and only 2 detected on an ASUS P7P55D deluxe.
Bios was my issue but I needed to do this (but with pairs of sticks instead of sticks) after the bios update to finally get my 8gb under windows:
Make a clear cmos. Then boot the computer with only one stick of ram in the port .
If everything is fine, turn off and add the other port of the same color for dual channel.
If it does not boot with the 2 sticks in the port of the good color, try to switch ports again. Maybe one stick is dead?

Out of memory problem using the API

Hi all,
I need your assistance, we are working with CDB 10.2 making searches and retrieving the documents with all their attributes.
In our actual scenario we have a single user (which represents an application) accessing CDB. This user use several persistent sessions simultaneously. I mean, several thousands of final users connect to an application that uses one user of CDB to connect to CDB with several persistent sessions.
To simulate this scenario we wrote java code that open five threads and make several searches (requesting all the attributes) using the same user on cdb.
Retrieving a considerable amount of data found on the search (~5000), we found a “Out of memory” problem when we made these tests:
-     5 threads obtaining 100 documents (and all their attributes) / search
-     1 thread obtaining 500 documents (and all their attributes) / search
-     Also we have same problem if we make several searches with less results
We suppose it’s a configuration or code issue so we ask for your assistance and experience to solve it.
Thanks for your help,
Dani
import java.sql.Connection;
import oracle.ifs.examples.api.constants.AttributeRequests;
import oracle.ifs.examples.api.util.CommonUtils;
import oracle.ifs.fdk.Attributes;
import oracle.ifs.fdk.ClientUtils;
import oracle.ifs.fdk.FdkConstants;
import oracle.ifs.fdk.FdkCredential;
import oracle.ifs.fdk.ManagersFactory;
import oracle.ifs.fdk.NamedValue;
import oracle.ifs.fdk.Options;
import oracle.ifs.fdk.SearchExpression;
import oracle.ifs.fdk.SearchManager;
import oracle.ifs.fdk.SimpleFdkCredential;
import oracle.jdbc.pool.OracleDataSource;
public class Prueba {
     public static void main(String args[]) {
          Thread thread = new BasicThread1();
          Thread thread1 = new BasicThread1();
          Thread thread2 = new BasicThread1();
          Thread thread3 = new BasicThread1();
          Thread thread4 = new BasicThread1();
          thread.start();
          thread1.start();
          thread2.start();
          thread3.start();
          thread4.start();
class BasicThread1 extends Thread {
     public void run() {
          ManagersFactory session = null;
          try {
               System.out.println(this.getName() + "-->init");
               session = getSession();
               SearchManager sManager = session.getSearchManager();
               SearchExpression srchExpr = new SearchExpression(Attributes.SIZE,
                         new Integer(20000000), FdkConstants.OPERATOR_LESS_THAN);
               NamedValue[] res = null;
               for (int i = 0; i < 100000; i++) {
                    res = sManager.search(srchExpr, basicSearchOptions2,
                              AttributeRequests.DOCUMENT_CATEGORY_ATTRIBUTES);
               System.out.println(this.getName()+" --> fin sin error: " + res.length);
               } catch (Throwable t) {
t.printStackTrace();
System.out.println("<--"+this.getName());
          } finally {
               CommonUtils.bestEffortLogout(session);
     static NamedValue[] basicSearchOptions2 = new NamedValue[] {
               ClientUtils.newNamedValue(
                                   Options.MULTILEVEL_FOLDER_RESTRICTION,
                                   Boolean.TRUE),
               ClientUtils.newNamedValue(Options.SEARCH_FOR_DOCUMENTS,
                         Boolean.TRUE),
               ClientUtils.newNamedValue(Options.SEARCH_FOR_FOLDERS,
                         Boolean.FALSE),
               ClientUtils.newNamedValue(Options.RETURN_COUNT,
                         new Integer(500)) //<<Maximo nº de elementos
     private static ManagersFactory getSession() throws Exception {
     OracleDataSource ods = new OracleDataSource();
     ods.setURL("URL");
     Connection conn = ods.getConnection();
     FdkCredential credential = new SimpleFdkCredential("USER","PSW");
     ManagersFactory session = ManagersFactory.login(credential,
     "SERVER");
return session;
}

re-Post

Report (uses LDB's) giving dump due to memory problem

Hi,
I have a report which is giving dump in production due to memory problem.
Memory is increased from basis part,but still getting same error.
the report uses Logical DataBases.
Can anyone suggest solution to solve this problem.
regards
Mallik

Hi Amit,
thanks for ur quick reply and ur idea "make changes in development and write the logic to read records in chunks".
I have n't worked on LDB's till now.So i Don't know how I can read the data in chunks from LDB's.
Can u Plz give some idea how to read data in chunks.
Iam also sending the code,if possible ,plz go thru it and give me some idea.
Hope u will help me.
CODE.
REPORT ZAROP028
ABLES: PROJ,                          " Project definition
        PRPS_R,                        " WBS element
        PRPS,                          " WBS elements
        TJ02T,                         " System Status Values
        TCJ1,                          " Project Types
        JEST,                          " Active System Status
        COSP1,                         " cost totals - external postings
        COSS1,                         " cost totals - internal postings
        COVP11,                        " Line Items by Prd & Doc Header
        COVP12,                        " Line Items by Prd & Doc Header
        BHDGD,                         " Page heading table.
        AUFK,                          " Order Master Data for WBS (LDB)
        ANEP,                          " Asset line item
        COBRB,                         "Distribution Rules Settlement Ru
        SETHIER,                       "Hierarchy Structure
        TKA02,                         "Controlling Area Assignment
        CEPC,                          "Profit Center Master Data
        PSDYPD,                        "Dummy struct for GET proj late
        PSDYPR,                        "Dummy struct for GET PRPS_R late
        PSDYNP.                        "Dummy struct for GET AUFK late
CONSTANTS:
          C_E                   TYPE C VALUE 'E',
          C_I                   TYPE C VALUE 'I',
          C_N                   TYPE C VALUE 'N',
          C_X                   TYPE C VALUE 'X',
          C_Y                   TYPE C VALUE 'Y',
          C_NE(2)               TYPE C VALUE 'NE',
          C_EQ(2)               TYPE C VALUE 'EQ',
          C_USD(3)              TYPE C VALUE 'USD',
          C_04(2)               TYPE C VALUE '04',
          C_I0046(5)            TYPE C VALUE 'I0046'
various working storage
DATA:
     W_TXT04(4) TYPE C.                      " make status uppercase
DATA: ACTIVE(1)        TYPE C VALUE 'A',       " type for status_flag
      INACTIVE(1)      TYPE C VALUE 'I',       " type for status_flag
      STATUS_FLAG(1)   TYPE C VALUE 'I',       " wbs active or inactive?
      INACTIVEDT       LIKE SY-DATUM,          " inactive date for wbs
      REC_FLAG         TYPE C VALUE 'N',       " records retrieved?
      DAYS_INACTIVE    TYPE I,                 " days wbs has been inac
      W_LOWINACT       TYPE I,                 " smallest inactive days
      WBS_CNT          TYPE I,                 " cnt for wbs in status
      W_AUC_COST       TYPE P DECIMALS 2,      " unsettled auc cost
      W_VNAME          LIKE PRPS_R-VNAME.      " venture number storage
DATA: BEGIN OF ITAB OCCURS 0,                              "MELI-5F2KMH
        COMPCODE       LIKE PROJ-VBUKR,    " company code
        PLANT          LIKE PROJ-WERKS,    " plant
        PROJECT        LIKE PROJ-PSPID,    " project
        NAME           LIKE PROJ-POST1,    " project description
        DINACT         TYPE I,             " days proj inactive
        PRCTR          LIKE PROJ-PRCTR,    " profit center
        SETID          LIKE SETHIER-SETID, " level 2 pc hier
        DESCRIPT       LIKE SETHEADERT-DESCRIPT,
        VERNA          LIKE PROJ-VERNA,    " person responsible
        AUC            TYPE P DECIMALS 2, " AUC unsettled amount
      END OF ITAB.
DATA: BEGIN OF I_INACT OCCURS 0,
        STAT LIKE JEST-STAT,
        INACT LIKE JEST-INACT,
      END OF I_INACT.
DATA: EQ_FLAG TYPE C,                       " system status flag
      NE_FLAG TYPE C.                       " system status flag
TYPES: BEGIN OF T_COSTS,
          PSPID LIKE PROJ-PSPID,
          BUDAT LIKE COVP11-BUDAT,
        END OF T_COSTS.
DATA: I_PROJ LIKE PROJ OCCURS 0 WITH HEADER LINE,
       I_PRPS_R LIKE PRPS_R OCCURS 0 WITH HEADER LINE,
       I_COSTS TYPE T_COSTS OCCURS 0 WITH HEADER LINE.
DATA: W_RECORDS TYPE I.
DATA: FOUND_FLAG TYPE C.                        " CHAD-4PRPDE
DATA: BEGIN OF I_HIER OCCURS 0.                             "FEAT-5BNRRP
        INCLUDE STRUCTURE SETHIER.                          "FEAT-5BNRRP
DATA: END OF I_HIER.                                        "FEAT-5BNRRP
RANGES: R_TJ02T FOR TJ02T-ISTAT.
DATA: W_LVL2 LIKE SETHIER-SETID.                            "MELI-5F2KMH
SELECTION-SCREEN BEGIN OF BLOCK PROJECT WITH FRAME TITLE TEXT-B01.
PARAMETERS:       P_BUDAT LIKE COVP11-BUDAT,
                  DAYINACT(3) TYPE N DEFAULT '090'.
SELECTION-SCREEN SKIP.                                      "FEAT-5BNRRP
PARAMETERS:       P_PC-SET LIKE CEPC-KHINR OBLIGATORY       "FEAT-5BNRRP
                  DEFAULT 'SCH_STREAM'.                     "FEAT-5BNRRP
SELECTION-SCREEN END OF BLOCK PROJECT.
SELECTION-SCREEN BEGIN OF BLOCK SORT WITH FRAME TITLE TEXT-B02.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) TEXT-C01.
SELECTION-SCREEN POSITION 15.
PARAMETERS: P_PLANT RADIOBUTTON GROUP SORT DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) TEXT-C03.                    "FEAT-5BNRRP
SELECTION-SCREEN POSITION 15.
PARAMETERS: P_PRCTR RADIOBUTTON GROUP SORT.                "FEAT-5BNRRP
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) TEXT-C04.
SELECTION-SCREEN POSITION 15.
PARAMETERS: P_DAYS RADIOBUTTON GROUP SORT.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SORT.
AT SELECTION-SCREEN OUTPUT.
PERFORM USER_PARM_INIT.
AT SELECTION-SCREEN.
PERFORM CHECK_PROJ_CRITERIA.
START-OF-SELECTION.
PERFORM BUILD_PC_HIER USING P_PC-SET.
Project Definition                                                  *
GET PROJ.
MOVE-CORRESPONDING PROJ TO I_PROJ.                        "MELI-5F2KMH
APPEND I_PROJ.                                            "MELI-5F2KMH
CLEAR I_PROJ.
WBS element table
GET PRPS_R.
MOVE-CORRESPONDING PRPS_R TO I_PRPS_R.
APPEND I_PRPS_R.
CLEAR I_PRPS_R.
GET all order and cost objects associated with order and elements
GET AUFK.
GET COSP1.
CHECK COSP1-WRTTP EQ C_04.      " check if value type '04'
Get last date that the wbselement was updated and determine status
GET COVP11.
MOVE PROJ-PSPID TO I_COSTS-PSPID.
MOVE COVP11-BUDAT TO I_COSTS-BUDAT.
APPEND I_COSTS.
CLEAR I_COSTS.
Loop through Internal cost statements
GET COSS1.
CHECK COSS1-WRTTP EQ C_04.           " if value type is 04
Get last date that the wbselement was updated and determine status
GET COVP12.
MOVE PROJ-PSPID TO I_COSTS-PSPID.
MOVE COVP12-BUDAT TO I_COSTS-BUDAT.
APPEND I_COSTS.
CLEAR I_COSTS.
END-OF-SELECTION.
PERFORM BUILD_TABLE.
DELETE ITAB WHERE DINACT < DAYINACT.
DESCRIBE TABLE ITAB LINES W_RECORDS.
IF W_RECORDS = 0.
    MESSAGE I024.
ENDIF.
PERFORM WRITE_REPORT.
      FORM CHECK_PROJ_CRITERIA                                      *
This form verifies correct selection criteria has been entered from *
the selection screen inputs. If incorrect data has been entered the*
valid information messages are displayed.                           *
FORM CHECK_PROJ_CRITERIA.
check for either posting date or inactivity criteria but not both
IF NOT P_BUDAT IS INITIAL AND NOT DAYINACT IS INITIAL.
    MESSAGE E119.
ENDIF.
IF NOT DAYINACT IS INITIAL.          "check s/o day inactive
    IF NOT DAYINACT <= 998.
      MESSAGE E018.
    ELSE.
      INACTIVEDT = SY-DATUM - DAYINACT.
    ENDIF.
if days inactive is initial set INACTIVEDT using the posting date
ELSE.
    INACTIVEDT = P_BUDAT.
ENDIF.
ENDFORM.                    " CHECK_PROJ_CRITERIA
      FORM GET_AUC_COSTS                                            *
This form retrieves AUC costs for records based on AUFK2 where they *
meet project criteria. This pulls the unsettled amount on a AUC as *
a settlement receiver.                                              *
FORM GET_AUC_COSTS USING F_OBJNR F_BUKRS.
CONSTANTS:
   C_SETLEMENT_ANNUAL LIKE COBRB-PERBZ VALUE 'JHR',   "Annual Settlement
    C_DEP_AREA_STD     LIKE ANEP-AFABE VALUE '01'.    "Std depreciation
DATA: L_ANLC LIKE ANLC OCCURS 0 WITH HEADER LINE,
        L_ANLCV LIKE ANLCV OCCURS 0 WITH HEADER LINE,
        BEGIN OF L_COBRB OCCURS 0,                       "SRIN-6ZNEAR
        ANLN1 LIKE COBRB-ANLN1,
        ANLN2 LIKE COBRB-ANLN2,
        END OF L_COBRB,
        F_H_COST TYPE P DECIMALS 2.
SELECT ANLN1 ANLN2 FROM COBRB
    INTO TABLE L_COBRB                                    " SRIN-6ZNEAR
     WHERE OBJNR = F_OBJNR
       AND PERBZ = C_SETLEMENT_ANNUAL.
IF SY-SUBRC NE 0.                                        " gary-463qbd
    EXIT.                                                  " gary-463qbd
ENDIF.                                                   " gary-463qbd
LOOP AT L_COBRB.                                           " gary-463qbd
CLEAR: F_H_COST.
SELECT SINGLE * FROM ANLC
    INTO L_ANLC
    WHERE BUKRS = F_BUKRS AND
            ANLN1 = L_COBRB-ANLN1 AND
            ANLN2 = L_COBRB-ANLN2 AND
            GJAHR = SY-DATUM(4) AND
            AFABE = C_DEP_AREA_STD AND
            ZUJHR = '0000' AND
            ZUCOD = '0000'.
    IF SY-SUBRC = 0.
      CALL FUNCTION 'FI_AA_VALUES_CALCULATE'
           EXPORTING
                I_ANLC = L_ANLC
           IMPORTING
                E_ANLCV = L_ANLCV.
      F_H_COST = L_ANLCV-BCHWRT_LFD.
    ENDIF.
ADD: F_H_COST TO W_AUC_COST.
ENDLOOP.                                                   " gary-463qbd
ENDFORM.                    " GET_AUC_COSTS
      FORM CHECK_INACTIVE_DATE                                      *
This form checks the computed inactive date based on the formal     *
parameter DAYS_INACTIVE. If DAYS_INACTIVE is more current than the *
current lowest inactive date W_LOWINACT then W_LOWINACT is replaced *
with this value.                                                    *
FORM CHECK_INACTIVE_DATE USING DAYS_INACTIVE.
IF DAYS_INACTIVE < W_LOWINACT.
    MOVE DAYS_INACTIVE TO W_LOWINACT.
ELSEIF W_LOWINACT EQ 0.
    MOVE: DAYS_INACTIVE TO W_LOWINACT,
          W_LOWINACT    TO ITAB-DINACT.
ENDIF.
ENDFORM.                    " CHECK_INACTIVE_DATE
      FORM build_table                                               *
collect fields to the internal table ITAB                           *
FORM BUILD_TABLE.
SORT I_COSTS BY PSPID ASCENDING BUDAT DESCENDING.
LOOP AT I_PROJ.
    CLEAR W_AUC_COST.
    READ TABLE I_COSTS WITH KEY PSPID = I_PROJ-PSPID
                            BINARY SEARCH.
    IF SY-SUBRC = 0.
      ITAB-DINACT = SY-DATUM - I_COSTS-BUDAT.
    ELSE.
      ITAB-DINACT = SY-DATUM - I_PROJ-ERDAT.
    ENDIF.
    LOOP AT I_PRPS_R WHERE PSPHI = I_PROJ-PSPNR AND
                           BELKZ = 'X'.
      IF NOT I_PRPS_R-IMPRF IS INITIAL.
        PERFORM GET_AUC_COSTS USING I_PRPS_R-OBJNR
                                    I_PRPS_R-PBUKR.
      ELSE.
        CONTINUE.
      ENDIF.
    ENDLOOP.
    ITAB-COMPCODE = I_PROJ-VBUKR.
    ITAB-PLANT    = I_PROJ-WERKS.
    ITAB-PROJECT = I_PROJ-PSPID.
    ITAB-NAME     = I_PROJ-POST1.
    ITAB-PRCTR    = I_PROJ-PRCTR.
    ITAB-VERNA    = I_PROJ-VERNA.
    ITAB-AUC      = W_AUC_COST.
    IF ITAB-DINACT > DAYINACT.
      PERFORM GET_HIER_INFO.
    ENDIF.
    APPEND ITAB.
    CLEAR ITAB.
ENDLOOP.
ENDFORM.                    " BUILD_TABLE
      FORM STATUS_CHECK                                              *
Checks the active status of the project definition for the          *
parameter values assigned.                                          *
FORM STATUS_CHECK USING F_OBJNR.
begin of GARY-463QBD
CLEAR: I_INACT.
REFRESH: I_INACT.
MOVE: C_N TO EQ_FLAG,
        C_Y TO NE_FLAG.
retrieve status for a given record
SELECT STAT INACT
    INTO TABLE I_INACT
    FROM JEST
    WHERE OBJNR EQ F_OBJNR AND
          INACT NE C_X.
sort internal status entered by user
SORT R_TJ02T BY OPTION DESCENDING.
check all current object statuses meet user entered criteria
LOOP AT R_TJ02T WHERE OPTION EQ C_NE.
check for user selected options
    READ TABLE I_INACT WITH KEY STAT = R_TJ02T-LOW.
    IF SY-SUBRC EQ 0.
      MOVE C_N TO NE_FLAG.
      EXIT.
    ENDIF.
ENDLOOP.
LOOP AT R_TJ02T WHERE OPTION EQ C_EQ.
check for user selected options
    READ TABLE I_INACT WITH KEY STAT = R_TJ02T-LOW.
    IF SY-SUBRC EQ 0.
      MOVE C_Y TO EQ_FLAG.
      EXIT.
    ENDIF.
ENDLOOP.
check for no statuses entered as EQ option
LOOP AT R_TJ02T WHERE OPTION EQ C_EQ.
    EXIT.
ENDLOOP.
if so move c_y to eq_flag
IF SY-SUBRC NE 0.
    MOVE C_Y TO EQ_FLAG.
ENDIF.
if both eq_flag or ne_flag are true(c_y) move true to valid_flag
IF ( EQ_FLAG EQ C_N OR
       NE_FLAG EQ C_N ).
    REJECT 'PRPS_R'.
ENDIF.
end of GARY-463QBD
ENDFORM.                    " STATUS_CHECK
      Form WRITE_REPORT
FORM WRITE_REPORT.
IF P_PLANT EQ 'X'.
SORT ASCENDING BY ITAB-BUSAREA                           "FEAT-5BNRRP
    SORT ITAB ASCENDING BY PLANT
                           PROJECT.
ELSEIF P_PRCTR EQ 'X'.
   SORT ITAB ASCENDING BY PRCTR                             "FEAT-5BNRRP
                            PROJECT.
ELSE.
   SORT ITAB ASCENDING BY DINACT
                            PROJECT.
ENDIF.
FORMAT COLOR COL_BACKGROUND INTENSIFIED ON.
                                                     "MELI-5F2KMH
LOOP AT ITAB.                                               "MELI-5F2KMH
    WRITE:   /     ITAB-COMPCODE,
             9(4) ITAB-PLANT,
            17(12) ITAB-SETID,
            33(40) ITAB-DESCRIPT,
            77(10) ITAB-PRCTR,
            91(24) ITAB-PROJECT,
           119(40) ITAB-NAME,
           163(25) ITAB-VERNA,
           192(15) ITAB-AUC CURRENCY C_USD,
           211(8) ITAB-DINACT.
ENDLOOP.
ENDFORM.                    " WRITE_REPORT
      Form USER_PARM_INIT
Initializes user parameter settings
FORM USER_PARM_INIT.
ENDFORM.                    " USER_PARM_INIT
At top of every page, generate Amoco-standard header.
TOP-OF-PAGE.
MOVE: '0'       TO BHDGD-INIFL,
       SY-LINSZ   TO BHDGD-LINES,
       SY-UNAME   TO BHDGD-UNAME,
       SY-REPID   TO BHDGD-REPID,
       SY-TITLE   TO BHDGD-LINE1,
       SPACE      TO BHDGD-DOMAI,
       SPACE      TO BHDGD-SEPAR,
       SPACE      TO BHDGD-MIFFL.
IF P_PLANT EQ 'X'.
    MOVE TEXT-H01 TO BHDGD-LINE2.
ELSE.
    MOVE TEXT-H03 TO BHDGD-LINE2.                          "FEAT-5BNRRP
ENDIF.
temporarily clear sy-mandt to remove "europe" from header "FEAT-5BNRRP
DATA: W_MANDT LIKE SY-MANDT.
BHDGD-BUKRS = SPACE.
W_MANDT     = SY-MANDT.
CLEAR SY-MANDT.
FORMAT COLOR COL_BACKGROUND INTENSIFIED OFF.
PERFORM BATCH-HEADING(RSBTCHH0).
FORMAT RESET.
reset sy-mandt                                            "FEAT-5BNRRP
SY-MANDT = W_MANDT.
PERFORM PGH_WRITE_HEADING USING TEXT-003 INACTIVEDT.      "MELI-5F2KMH
SKIP 1.
ULINE.
write heading info
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE: /1(5)'CCode',
          9(5)'Plant',
          17(12)'Level 2 Node',
          33(40)'Level 2 Node Description',
          77(10)'Profit Ctr',
          91(18)'Project Definition',
         119(19)'Project Description',
          163(18)'Person Responsible',
          192(15)' AUC Unsettled',
          211(13)'Days Inactive'.
end FEAT-5BNRRP
BEGIN FEAT-5BNRRP NEW FORMS
FORM BUILD_PC_HIER
FORM BUILD_PC_HIER USING SETID.
DATA: W_SETID LIKE SETHIER-SETID,
         W_NEWSETID LIKE SETHIER-SETID.
CONCATENATE '0H' SETID INTO W_SETID.
CALL FUNCTION 'G_SET_GET_ID_FROM_NAME'
       EXPORTING
            SHORTNAME     = W_SETID
            TABNAME       = 'GLPCT'
            SETCLASS      = '0106'
            SUPRESS_POPUP = 'X'
            OLD_SETID     = W_NEWSETID
       IMPORTING
            NEW_SETID     = W_NEWSETID.
CALL FUNCTION 'G_SET_TREE_IMPORT'
       EXPORTING
            CLIENT                    = SY-MANDT
            LANGU                     = SY-LANGU
            SETID                     = W_NEWSETID
            TABNAME                   = 'GLPCT'
       TABLES
            SET_HIERARCHY             = I_HIER
       EXCEPTIONS
            SET_NOT_FOUND             = 1
            ILLEGAL_FIELD_REPLACEMENT = 2
            ILLEGAL_TABLE_REPLACEMENT = 3
            OTHERS                    = 4.
CLEAR I_HIER.
ENDFORM.
FORM GET_HIER_INFO
FORM GET_HIER_INFO.
DATA: W_SETID LIKE SETHIER-SETID,
         W_KHINR LIKE CEPC-KHINR,
         W_INDEX TYPE I.
CLEAR: W_SETID,
         W_KHINR,
         W_INDEX.
DETERMINE PROFIT CENTER NODE
SELECT SINGLE KHINR
    FROM CEPC
    INTO W_KHINR
    WHERE PRCTR EQ ITAB-PRCTR.
CONCATENATE '0106' I_PROJ-VKOKR W_KHINR
    INTO W_SETID.
READ TABLE I_HIER WITH KEY
                    SETID = W_SETID.
IF SY-SUBRC EQ 0.
    W_INDEX = SY-TABIX.
    DO.
      READ TABLE I_HIER INDEX W_INDEX.
      IF W_INDEX = 0.
        ITAB-SETID = 'Not Found'.
        EXIT.
      ENDIF.
      IF I_HIER-LEVEL = 1.
        ITAB-SETID = I_HIER-SETID+8(12).
        ITAB-DESCRIPT = I_HIER-DESCRIPT.
        EXIT.
      ENDIF.
      IF I_HIER-LEVEL = 2.
        ITAB-SETID = I_HIER-SETID+8(12).
        ITAB-DESCRIPT = I_HIER-DESCRIPT.
        EXIT.
      ENDIF.
      W_INDEX = W_INDEX - 1.
    ENDDO.
ELSE.
    ITAB-SETID = 'Not Found'.
ENDIF.
ENDFORM.
END FEAT-5BNRRP NEW FORMS
*&      Form PGH_WRITE_HEADING WR MELI-5F2KMH
FORM PGH_WRITE_HEADING USING L_V1 L_V2.
DATA: L_LINSZ    LIKE SY-LINSZ.
DATA: L_TITLEL   LIKE SY-TABIX.
DATA: L_START    LIKE SY-TABIX.
DATA: L_DATE     LIKE SY-DATUM.
DATA: L_FORMATTED_DATE(10) TYPE C.
DATA: L_TITLE(27) TYPE C.
MOVE L_V2 TO L_DATE.
WRITE L_DATE TO L_FORMATTED_DATE.
CONCATENATE L_V1 L_FORMATTED_DATE INTO L_TITLE
    SEPARATED BY SPACE.
L_LINSZ = SY-LINSZ.
L_TITLEL = STRLEN( L_TITLE ).
L_START = ( L_LINSZ / 2 ) - ( L_TITLEL / 2 ) - 2.
NEW-LINE.
POSITION L_START.
WRITE: L_TITLE.
regards
Mallik

Flex 4 RichEditableText out of memory problems

Hello, we're conducting performance testing on the UI of a productivity application we're developing using Adobe AIR. We are using Flash Builder 4 public beta. One part of the performance test is updating the textFlow property of a RichEditableText control every 5 seconds with random data that contains several paragraphs and several images (to mimic a typical news article). We used TextFlowUtil.importFromString(str) to convert the raw data to a textFlow object.
We found that the above test with the RichEditableText control would quickly crash the AIR runtime with presumably out-of-memory problems. If we switch to using the (read-only) RichText control, the problem went away. The only material difference between the two controls we could find in the documentation is that the RichEditableText control supports unlimited undo/redos as long as it retains focus. Could this be the source of the memory problem? Regardless, can its behavior be modified to avoid the out-of-memory problems?
The use case we are trying to simulate is having the productivity app open for weeks at a time, with constant editing and going back and forth between different workflows.
Thanks for your help, and please let me know if you need additional information

Try a more recent build.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

N70-1 Memory Problem[Help!!]

Similar Messages

Maybe you are looking for