N70 having a new software version working with Tom...

Hey everyone,
I have read a couple of threads talking about Nokia N70 & TomTom. Did anyone get there phones flashed with the new software version which is V5.0609.2.01, 01-03-06, RM-84? and is using the latest tomtom mobile 5 version 5.2 (443). I want to know how it works and what all problems still exits.
Cheers!

Main problems are with the bluetooth connection being dropped.
I've had mine flashed to Version 5 firmware and it still drops the bluetooth connection to the GPS receiver.
I'm not using the genuine TomTom GPS receiver so that could be causing it.
It's not any way near as bad as version 2, that was rubbish the GPS connection dropped out every 20mins.
Then you had to switch the phone on/off to reset it.
IT's been a nightmare for alot of owners!!

Similar Messages

WLC 5508 software version working with ISE1.1.2

Hi,
My understanding is that for fully WLC 5508 integration with ISE 1.1.2, it needs Version 7.2.103.0. Question is if customer has 5508 with either 7.0.230 or 7.0.98, and ISE 1.1.2, can AAA part work? what part will not work, any potential issue if they don't upgrade 5508 to 7.2.103?
Thanks in advance!
Tina

Please check the below Table:
Table 1 Supported Network Access Devices
Device
Minimum OS Version
MAB
802.1X
Web Auth
Session CoA
VLAN
DACL
SGA
IOS Sensor
CWA
LWA
Wireless LAN Controller (WLC) 2500, 5500
7.2.103.0
No6
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Ref. Link: http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html#wp55038

I am using InDesign CS 3.0.1 with Windows XP. I am getting a new computer with Windows 8.1. Will my version work with this? If not can I get an upgrade?

I am using InDesign CS 3.0.1 with Windows XP. I am getting a new computer with Windows 8.1. Will my version work with this? If not can I get an upgrade?

Probably won't work. You can buy a full license for CS6 which is already two versions and soon to be three out of date or you can subscribe to Creative Cloud.

Scanning software to work with CS6 and Mountain Lion

Since I upgrading my Mac to OS Mountain Lion 10.8 and downloaded Adobe CS 6 I have been unable to get my Epson Scanner to work properly. Since none of the drivers from the Epson and Adobe websites have worked so that I could scan from photoshop, I am looking into using third party software. Adobe mentioned VueScan in their instructions, but it is expensive and I don't like how it is laid out. It appears that SilverFast only works with 32 bit not the 64 required in CS6.
Has anyone else found scanning software that worked for them?
Or does anyone have an idea of getting the Epson software to work on my machine?
The scanner is an Epson Perfection v600 photo scanner, which is still being sold currently as something that works with new computers.

I have a scanner. I am trying to get a driver or new scanner software to work with it. Someone in a different discussion pointed out an article in MacWorld that goes into why this is not working.
http://www.macworld.com/article/1168305/get_your_scanner_to_work_with_photoshop_cs6.html
I would still be interested to know if anyone has had a positive experience with third party scanning sofware. Vue scan? Silverfast?
Also to the Adobe staff :
This is quoted from the MacWorld article.
Right now, if users are running Mountain Lion (OS X 10.8), they will not be able to scan into Photoshop CS6 as described. According to Adobe, this is an across-the-board problem with the Cocoa classes comprising the scanning interface that it is using in Photoshop. It is neither a user nor a scanner manufacturer issue.
Adobe is aware of the problem, has identified it as an Apple OS issue that they are working with Apple to solve, and offer no time frame for when it will be fixed. "
Any idea on the timeframe or if there will be an anouncement when this is resolved?

HP Scan 3 software not working with MacOS 10.9 Mavericks

I just bought a new iMac to replace my old iMac and updated toe mew Mac to 10.9 Mavwericks. Now my HP Scan 3 software does not work and there is no update for this software that I can find. Can anyone help getting updated HP scanning software to use with Mavericks. Thank you.

Thanks for your reply. I tried what you suggestsed and it did not work. My printer was listed. The website says it is for MacOS 10.8 and Mavericks is 10.9. My printer prints fine. The problem is with the HP Scan 3 software. When I try to use it I get a dialog box that says check withn the developer as it does not work with my OS. Also, I went to the firm ware updater in my HP utilities folder and trie to run that. I got a message saying that there is no update for my device.
It is hard to believe that HP has not updated the scan software to work with Mavericks.

N73 - date for new software version

Please see below the date for the next update. This came from their Director of Customer Care:
"With regards to your recent enquiry concerning software availability for your product code 0539101 for UK Country Variant I can confirm that at present you already have the latest software version available. New software version for your product should be available no later than Friday the 8th December in both our Nokia service points and Nokia Software Updater."

goodie...
for all those complaining about no Country Variant fw editions, just hang on 2 more weeks and have a merry xmas

What Adobe Illustrator software will work with Mac OS 10.7.5?

What Adobe Illustrator software will work with Mac OS 10.7.5?

Hi TuBits,
The newest version will work on it, check it here: http://www.adobe.com/products/illustrator/tech-specs.html
Thanks!
Ankit

Does the new AIM Triton work with Ichat?

Hi,
Does anyone know if the new AIM Triton works with Ichat AV? I know the Beta version was not working but don't know about the new triton release.
Also, has anyone tried video/audio communication between Trillian and Ichat? Does it work? Is it better than AIM?
Thanks,
Stefano

I have been working with the Triton on a PC and after much research (frustration), I have found this stated on the AIM support site:
http://www.aim.com/helpfaq/startingout/getstarted.adp?aolp=#six
Q: Is AIM Triton compatible with AIM 5.9, AOL 9.0 and iChat?
A: : AIM Triton works seamlessly with AIM 5.9, AOL 9.0 and iChat. You can send and receive instant messages with your buddies using any of these clients. Certain features may not work across all clients at this time. Voice Chat with more than two people only works with other Triton users. Video Chat will work only between two Triton users at this time.
So after reading around, I believe the 5.9 will video to the iChat 3's but I haven't had the time to try. Other posts suggest this to be true. Including many by Ralph.

80Gb Ipod new software version

I have an 80 Gb Video iPod that I bought several months ago. My friend just bought a new one this past week. Hers is slightly different (thinner form factor), but the big difference is the new software version. It's much nicer. However, my iPod does not show any upgrades for software.
Is the new interface not going to be backwards compatible with the old hardware or is there another way to get it?
Thanks

Is the new interface not going to be backwards compatible with the old hardware
Unlikely.
is there another way to get it?
No.

HT204476 is there anyway to get rid of the old iPhoto Library? It defeats the purpose of having a new software if I have to keep the remnants of the older one.

is there anyway to get rid of the old iPhoto Library? It defeats the purpose of having a new software if I have to keep the remnants of the older one.

dubthedankest wrote:
Where are the masters actually stored upon conversion from Aperture to Photos? Photos?
The master files are stored on your drive, but they are not actually stored "in" any folder. Folders are really just special files that store various bits of information about the files associated with that folder, including links to where they actually are stored. That's why you can "move" a file from one folder to another very quickly: all that you really are doing is moving the link & other info from one folder to the other folder, while the file itself stays where it was.
Because of this, it is possible for more than one folder to link to the same file -- in the Finder it looks just like there are two copies of the file, one in each folder, but there really is just the one copy. From the description in the Photos saves disk space by sharing images with your iPhoto or Aperture libraries doc, it looks like that's what happens when you import your iPhoto library into Photos -- both the old iPhoto Library "file" (which actually is a set of folders & subfolders of files) & the Photos Library (also consisting of folders & files) contain links to the master files, but like the Apple doc says, there really is just one set of master files being stored.
This is very similar to the way Time Machine backups look like they have multiple copies of the same unique file, one in each time-stamped backup folder, but there really is only one copy on the Time Machine drive. My guess is Apple is using hard links for this, which means the actual master files will not be deleted from the file system as long as at least one link remains to each of them.
So you should be safe in deleting the old iPhotos Library once you are absolutely sure you don't need it, but to be sure, if it was me I would make a backup just in case, or better yet just leave it alone.

Is there any printers (preferably new) that will work with OS9?

Is there any printers (preferably new) that will work with OS9?

Sorry about above 'pre' font - for some reason it would not let me do a normal post. It should have been as follows:
I agree.
I use a LaserWriter 16/600 PS plugged into my router via an adaptor.
There are probably many old Color StyleWriters out there: http://en.wikipedia.org/wiki/StyleWriter
Some of these had Canon engines and Canon produced their own almost identical versions.

New WRT54G Version 4 with FW v4.20.6 - Should/MUST I update to FW V4.20.7?

Hi,
Just got this new WRT54G Version 4 with firmware v4.20.6 and everything seems to be working just fine and am just wondering should/MUST I upgrade to firmware v4.20.7?
Also, how can I tell if my WRT54G has 4MB Flash and 16MB Ram?
Thanks for your help in advance.Message Edited by tigerb on 07-26-2006 06:50 AM

> Just got this new WRT54G Version 4 with firmware v4.20.6 and everything
> seems to be working just fine and am just wondering should/MUST I
> upgrade to firmware v4.20.7?
Download the firmware update and look at the *_ver.txt (or whatever the version file is called for your particular router) to see if the changes affect the functionality you use.
> Also, how can I tell if my WRT54G has 4MB Flash and 16MB Ram?
http://wiki.openwrt.org/TableOfHardware#head-6b2369a6aabba3642915213936b680fdedcffe0d
Look down the list for your model and version and you'll see the specs on your router.

Ever since I upgradeHd to the new software, nothing works like it used to. The iPad is slow, the calendars appear and disappear andi have to re- sync. Does any one knows if a patch is on thevworks?

Ever since I upgraded to the new software, nothing works like it used to. The iPad is slow, the calendars appear and disappear andi have to re- sync. Does any one knows if a patch is on the works to resolve the problems? I know other users are having the same problem.

Back up your iPad. Then restore the iPad to the original factory settings. Then restore from your backup. Things should improve for you.

I have an idea for a new feature of the calendar app on a new software version. Does anyone know how to contact Apple to let them know the idea?

I have an idea for a new convenient feature of the calendar app on a new software version. Does anyone know how to contact Apple to let them know the idea?

First see here > http://www.apple.com/legal/policies/ideas.html
You can leave Feedback here > http://www.apple.com/feedback/

Will idvd with a new MacBook Pro work with a DVCAM deck? I'm using firewire to burn a DVD from a DVCAM tape in a Sony DSR-30 deck but it isn't working.

Will iDVD with a new MacBook Pro work with a DVCAM deck? I'm using firewire to burn a DVD from a DVCAM tape in a Sony DSR-30 deck but it isn't working.

http://www.lafcpug.org/phorum/read.php?1,268296,268300
Bit of googling wouldn't go astray.

N70 having a new software version working with Tom...

Similar Messages

Maybe you are looking for