N70 - Not Enough Memory Delete some data first

Hi,
Could someone please help with a problem that i am having with N70. Messages Empty(All Folders) and no images or media files on the phone memory, al applications also are on the Memory card(1GB and 3/4th of it is free). But still i am getting this message of "Not Enough Memory to eprform the Operation. Delete some data first". Could someone please advise what i could do to resolve this, as now i do not have any log of Calls(missed, rec, dialled), no incoming messages etc.
Thanks in advance.
Regards,
Powi

first upgrade your phone software with the latest available version that you can check here:
http://europe.nokia.com/A4577224
if you have the latest software version,reset your phone by pressing *#7370# in standby mode(after backing up)
NOKIA means:Night Of King In Alone

Similar Messages

Memory Full. Delete some data

I am trying to delete some data because of the message I get when switching on my Nokia 3230.
The message says : "Home Screen: Memory insufficient. Delete some data first"
However, I cannot access the MENU/File Manager/Options by pressing the Menu key.
Any ideas?! Many thanks.
Ianor
Solved!
Go to Solution.

If the phone is unusable then unfortunately the only options you have are a hard reset or a trip to a nokia care point. Both will result in the total loss of all data and content that you have added to the phone.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, hold the power button for a second to switch on the phone.
4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
It may take a few attempts and very flexible fingers.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Server has not enough memory for operation (Some .rpt files not removing from Temp folder )

We have web application developed in ASP.NET 4.0 ftramework and published on IIS. And we are using 13_0_8 version of CR.
I am creating report files and exporting these as pdf. And I am disposing streams and report documents at the end. Initially, there wasn't any problem and temporary files which are created by CrystalReport were deleting all. But, now requests to the web application increeased to about 50.000 in a day and now some .rpt files are staying in Temp folder and I can't delete them. After recycling application pool all files are removed by IIS. Then, after 1 or 2 hours new .rpt files are creating in Temp folder. And after somewhile, application throws Server has not enough memory for operation. And, IMHO the reason is temp files. Here is the code I am using to export report as pdf.
Questions:
1. Is the reason of this exception is temp files in Temp folder?
2. What is wrong in that code?
ReportDocument report = DownloadPDF.GetReport(id);
   MemoryStream stream = (MemoryStream)report.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat);
   Response.ContentType = "application/pdf";
   Response.AddHeader("content-disposition", "attachment; filename=" + id+ ".pdf");
report.Close();
report.Dispose();
   try
   Response.BinaryWrite(stream.ToArray());
   Response.End();
   catch (Exception)
   finally
stream.Flush();
stream.Close();
stream.Dispose();
Here is the StackTrace

Hi Farhad
At 50,000 requests, you are more than likely running into the CR engine limit. E.g.; you're pushing way too hard... The following will be good reads for you:
Crystal Reports 2008 Component Engine Scalability | SCN
(The above doc does apply to current versions of CR - e.g.; no changes.)
Crystal Reports Maximum Report Processing Jobs ... | SCN
Scaling Crystal Reports for Visual Studio .NET
Choosing the Right Business Objects SDK for Your Needs
Choose the Right SDK for the Right Task
How Can I Optimize Scalability?
All of the above apply to your version of CR and thus the next question will be; how to proceed:
1) Bigger, faster servers will not hurt.
2) Web farms.
How Do I Use Crystal Reports in a Web Farm or Web Garden?
3) Crystal Reports Application Server, or perhaps even SAP BusinessObjects BI Platform 4.1
Crystal Enterprise Report Application Server - Overview
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

"not enough memory" error when attempting to get some podcast episodes

I subscribe to several podcasts. All but one seem to be working perfectly. Here's the url of the one I'm having trouble with:
http://feeds.feedburner.com/KBCAudio
Here's the problem:
All episodes appear as they should. However, some of the episides WILL download when I select "Get" and some WILL NOT. Those that will not yield the following error message:
"There is a problem dowloading {episode name}. There is not enough memory available. Please check that the URL is correct and the connection to the network is active and try again."
Any ideas how to resolve this? I've tried:
1. Deleting old files.
2. Deleting and re-subscribing to the feed.
Is this a problem with iTunes or a problem with the feed?

I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
Phil

N73ME Memory full delete some data

Memory full delete some data...every...time. . try this..
switch off the mobile phone then. . .Remove the memory card. . . Keep it switched off for a while and then. . .switch it on. . .again. . .For more help reply. . .sk
Sadath khan
Attachments:
sk.JPG ‏123 KB

do you have some apps installed on the phone memory istelf. there are some apps that will only install on the phone and not the memory card. is your firmware up to date? did you add anything new, try also removing some of the messages from the memory card and all the folders, send, inbox, outbox if applicable and see if this will make any difference.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

N82: Memory full. Delete some data from phone memo...

memory full. delete some data from phone memory
i deleted all of the messages in inbox and in memory card. i also tried *#7370#. stil the memory is full. i check the phone memory status everytime i delete the messages and it will show available memory for about 30kb. when i restart the phone and check the phone memory, it will indicate that it has 0 kb left. i didn't installed any application in it.
Message Edited by katnix on 13-Jul-2008 01:39 PM

proper advice???? that's the advice i gave, take it or leave it. it's not for you tell me what's proper or not.
i don't remember seeing your name in the thread above, and i don't remember you TELLING me before that you don't want to format.
now just not to go into alot of words. there is a better way you can use to talk to people. because we are trying to help. if you like what we suggest, fine, if not, wait for another suggestion or come with one yourself.
if you have a registery cleaner or a temp file cleaner for symbian , please be so kind to offer it's name here.
Fear not those who argue but those who dodge

I am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band as my sou d board only while recordinelse'

II am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band only as my sound board only while recording on something else and the. I will delete it.. Real P I A....

How do I upgrade the ram?
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

TS1702 When I Had To Do An Update For GarageBand On My IPad 2. I Had Not Enough Memory For a that App Update. So I Deleted It And When I Tried To Purchase It Again It Says Installing When It's not So I Cannot Purchase My GarageBand. PLEASE ANYONE HELP!

When I had to do an update for GarageBand on my ipad2. I had not enough memory to instal the update. So I deleted the app and tried to install my app again but it says installing when it's not. So I can't purchase GarageBand ever again. PLEASE HELP!

Hi Ben...almost the same issue...read mine...not sure yet if it is solvable !!!!

Not enough memory issue while acquiring data

Hi all,
I am trying to acquire audio data @ 50KS/s for 20 sec. using the PXI 4498 card in the PXI system. To acquire data I am using the DAQmx functions.
Step1 : Created DAQmx channel
Step2: Set the no. of sample to read as 20X50=1000000 to the DAQmx Timing function
Step3: DAQmx Read funtion to read the data. (Set the timeout as 20x2=40Seconds)
PLease find the attached screen shot of the block diagram.
Issue is sometimes I am facing the memory issue when I run this VI. Popup saying that "Not enough memory to complete this Operation" is getting popup and the Vi getting stop abruptly. Kinldy look into the screen shot and suggest me the apprapriate method to read the data at mentioned acquisition rate.
Note: The problem is not consistent. Sometimes I am facing the error and sometimes not.
Thanks in advance
Giridhar
Attachments:
Block diagram.jpg ‏208 KB

I think actdi is talking about loading an external database directly from the XML file using the jdbc XML driver, correct? I have not tried this yet, but am curious as to the results.
http://docs.oracle.com/cd/E17904_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDFIJEH
Hope this works.
Enjoy!
Michael R.

I'm trying to buy some music and iTunes says there is not enough memory available?

I'm trying to buy some music and iTunes says there is not enough memory available?

I found the answer for real. I called apple and talked to some dude. All you have to do is clear your payment information, save it and then re-enter it. thats the bug, thats it.
go to the store drop down menu on the itunes toolbar... click view my account... click edit payment information... select 'none' for your credit card...click done... then try and buy your music... if you have a gift card or whatever. if you are just using your credit card or debit card, re-enter your payment information.
it worked for me i hope it works for you.

Export report Excel-Data Only works not,'not enough memory for operation'

Hi all,
we are using in our Software CrystalReport Version 11 Service Pack 5. Crystal report is intergated for .NET. We can not uninstall CrystalReport Version 11 Service Pack 5 to install another Version or another Service Pack.
We are haveing problems to export report as Excel 97-2000 Data Only, "not enough memory for operation" message pop up after you try to export report as Excel data Only.
Export Report as PDF is working fine.
This problems are on Windows XP Sp3 and Vista. On Windows 7 we have no problem.
Please, can somebody help me solving this problem, or to finde a workaround for Windows XP. Memory from PC is not the problem.
Mit freundlichen Grüßen / Kind regards
Odisej Nujiq

Odisej, unfortunately, processes such as remote sessions are reserved for phone cases only. You can create a phone case here;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Also, just as an FYI, see the blog [What are these 'support' forums good for anyhow?|/people/ludek.uher/blog/2011/04/07/what-are-these-support-forums-good-for-anyhow]
Without phone support, you are left to do most of the foot work your self. On the forums, we can provide suggestions and guidance, but that is about it.
Couple of things to note though. If you do create a phone case, one of the 1st things that you will be asked is to update your app to SP6 - unless you can prove the same issue exists with SP6 (see more bellow).
Something I would recommend you try is to take an XP box, install SP6 on it, then install your app on it. If this works, your options are highly limited. E.g.; SP6...
One other utility that may be worthwhile to use is [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx]. Run that on the XP box. In the logs, look for "Access Denied" error messages. Look for load or other issues with crxf_xls.dll, exportmodeller.dll and crtslv.dll.
From your responses I am still not sure if you actually did run Modules and compared the results. This is much, much easier to do than working with ProcMon and I'd start there. To summarize, my troubleshooting plan (irrespective of the limits imposed on you) would be:
1) Use Modules as this is the easiest thing you can do
2) Try this with SP6 - more work that (1) above, but at least you are on the latest. If this works, banging your head into an SP5 wall will do you no good (like I said, irrespective of what ever limits...)
3) Use ProcMon - not too difficult, but time consuming as you will be looking over 100s, possibly 1000s of lines and not being familiar with details of CR, this will take time.
- Ludek

Sending failed memory is full delete some data bef...

Good Day
i have N900 and i'm facing a problem when i start any conversation i can send 1 msg then receive 1 the second i want to send the phone reflects with error msg
(sending failed memory is full delete some data before send or receive)
altho i have 26 gb free and i updated the phone to the latest version can any1 assist me with this

It could be a few things.. Try this on your phone..
Open this link on your phone
http://chris.intrepid.cx/N900/debug2.sh
Choose to save this file. Save it in the documents folder on your phone
Now, open an x terminal and type in this command exactly
sh MyDocs/.documents/debug2.sh
It will take a LONG time to finish.. but when it stops, connect your phone to your PC and browse the storage.. you'll find a file called debug2.txt.. Drop that in an email to me (check you personal messages for my email address) and I'll have a look

Data stream from OEM device, TCP/IP "not enough memory"

Hi Everyone,
I'm trying to catch a data stream from an OEM device over a TCP/IP link. I can start the data stream, or pause/resume it, but the OEM device determines when the data stream has ended. The data stream begins, and within 20 seconds, I get the famed "not enough memory" error. Once this happens, data is lost from the stream, and quite often the final message indicating completion is missed. I see two solutions to this. 1) Watch how many bytes are backed up on my TCP/IP port, and issue a pause command until I can process the backed up bytes at which point a resume will be issued. ...or 2) Use my application's memory usage in the same manner. Does anyone know how to do either of these things?
Thanks much

Hi Toader,
Thanks for your response.
1) I'm not sending any data. I'm trying to consume an incoming data stream which is being driven by an OEM device. This device basically has an FPGA hooked up to a 100Mbit/s hose. You can start it, pause it and resume it. Those are the available operations related to consuming the data stream. I think the crux of the problem is deciding when to pause the OEM device to give the LabView app a chance to process and store the accumulated portion of the data stream.
2) Sure, but it's not my program and is large and complicated. I guess I could write my own program within a program, but I would rather use the existing architecture. I might write my own micro app, but I doubt it will keep up with the FPGA driven hose. If I could detect the condition leading up to the "not enough memory" error, which it seems many LV developers have encountered, but not really solved, then I could issue a pause to the OEM device.
3) Well using a LabView application under a 2Ghz Windows box may not be sufficient hardware. But I really think it's the Windows operating system that I'm having trouble with, not the hardware platform.
I've tried several counters in the LabView application, watched task manager before/during/after the "not enough memory" error, and downloaded an interesting app called taskmanager.vi in an attempt to get something to correlate with the error message. I've not succeeded yet. Here's what I think is happening. The Windows OS is managing my wireless hardware, when it receives a TCP/IP packet, it puts it in the Windows Message que of my LabView application. I think the "not enough memory" error relates to a Windows OS allocation for my message que which is being exceeded. Any Windows programmers out there who would know how to look at the application's message que during runtime?
Thanks for your classic suggestions Toader, I may try a micro app which is spawned by the main app when its time to grab the data. My intuition is that no software limited by the Windows OS is going to keep up with single minded FPGA hardware.
I thought this very interesting discussion was the answer and it may still be, but after trying 30+ various counters under Memory, System, Process, TCP, and Server, none correlated to the error.
http://forums.ni.com/t5/LabVIEW/System-monitor-counter/m-p/1653448/message-uid/1653448/highlight/tru...
I also tried a taskmanager.vi, but none of the various flavors of memory tracked by that little gem correlated with the error either. At this point, I started to wonder "what memory was there not enough of?".
Terry

HT201364 I do not about startup disk?some times i received message not enough memory.

some times i received message not enough memory in your startup disk.Why?

See here > what-to-do-when-your-hard-drive-is-full.html

N70 - Not Enough Memory Delete some data first

Similar Messages

Maybe you are looking for