N70 Operating System and User Interface

Hi,
Could you please specify the OS and User Interface version of N70, have the OS/UI of the new handsets been changed recently, please give details?
Appreciate your help.

Good question with good answer.
I think may be I can contribute to it too.
Symbian OS is an operating system, designed for mobile devices, with associated libraries, user interface frameworks and reference implementations of common tools, produced by Symbian Ltd. It is a descendant of Psion's EPOC and runs exclusively on ARM processors.
Symbian is currently owned by Ericsson (15.6%), Nokia (47.9%), Panasonic (10.5%), Samsung (4.5%), Siemens AG (8.4%), and Sony Ericsson (13.1%). Whilst BenQ has acquired the mobile phone subsidiary of Siemens AG the Siemens AG stake in Symbian does not automatically pass to BenQ - this will need the approval of the Symbian Supervisory Board.
Symbian OS, with its roots in Psion Software's EPOC, is structured like many desktop operating systems with pre-emptive multitasking, multithreading, and memory protection.
There are a number of smartphone user interface platforms based on Symbian OS, including open platforms UIQ, Nokia's S60 (formerly known as "Series 60"), Series 80 and Series 90 and closed platforms such as that developed for NTT DoCoMo's FOMA handsets. This adaptability allows Symbian OS to be used on smartphones with a variety of form factors (e.g. clamshell or candybar/"monoblock", keypad- or pen-driven).
Here is a short history:
Symbian OS v9.1 released early 2005. It includes many new security related features, particularly a controversial platform security module facilitating mandatory code signing. Symbian argues that applications and content, and therefore a developers investment, are better protected than ever, however others contend that the requirement that every application be signed (and thus approved) violates the rights of the end-user, the owner of the phone, and limits the amount of free software available. The new ARM EABI binary model means developers need to retool and the security changes mean they may have to recode. S60 3rd Edition phones have Symbian OS 9.1. . The earlier versions had a fatal defect where the phone hangs temporarily after the owner sent hundreds of SMSes. However, on 13 September 2006, Nokia releases a small program to fix this defect.
Current recent sets like n91,n80,n73,n93 has OS 9.1.
Symbian OS v9.2 released Q1 2006. Support for Bluetooth 2.0 (was 1.2) and OMA Device Management 1.2 (was 1.1.2). S60 3rd Edition Feature Pack 1 phones have Symbian OS 9.2.
Symbian OS v9.3 released on 12 July 2006. Upgrades include native support for Wifi 802.11, HSDPA, Vietnamese language support.Message Edited by korngear on 31-Jan-2007
05:47 PM

Similar Messages

Displaying Work Order System and User Statuses in IW37 Search

I'd like to display the work order header system and user statuses along with the operation system and user statuses in an IW37 search but couldn't find an entry as such in the IW37 'change layout' dialog box.
David Macindoe

David Macindoe,
That Order header information isn't available in IW37 report.You may have to use IW37N report or enhance /copy IW37 report to get this information.
Regards
Narasimhan

I bought a second hand Macbook Pro and colorful stud Only after a few months I decided to reformat it Bad movie started here I did not get it with a disc and I come to install the operating system And he asks the name of Apple's user ID financed had been

I bought a second hand Macbook Pro and colorful stud
Only after a few months I decided to reformat it
Bad movie started here I did not get it with a disc and I come to install the operating system
And he asks the name of Apple's user ID financed had been bought Lion OS Now
And who sold me does not answer then I found the phone number of his mother
She said he lived in USA and paid him more than the lion version of the MacBook and now I can not install Lion
And I'm not from USA

Unless you go back to the original owner, yes you need to pay for it again.
You're entitled to the OS that shipped with the device from Apple, but if you don't have that media there's nothing you can really do. If the system originally shipped with 10.7 or 10.8 then when you boot it to Internet Recovery, it will automatically offer you that OS version (as the serial # is registered with Apple). If it shipped with an older OS, then you need to enter the Apple ID that purchased 10.7 or 10.8. You didn't purchase it so that's not you.
The options you have are to buy Lion for $29 US (I don't know the price in Palestine), or Mountain Lion for $19 US (don't know the price in Palestine either), and install from scratch.
And it's a good idea to know you have restore media before you reformat your machine.

I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to ICloud Drive or not? Has anyone done this? Is it awesome? I need to be able to access my resume from phone. I think this will help me achieve this.am i right?

I have an iphone6. I am unsure whether to go from 8.1.3 operating system and switch to ICloud Drive or not? Has anyone done this? Is it awesome? I need to be able to access my resume from phone. I think this will help me achieve this? Am i right? Is there any body out there right now that could help me? I'm thinking about going from 8.1.3 to I guess yosemite? Or is that for Mac computers? I don't understand the language entirely on the help page. Anyone's straight forward and easy stepped advice would be much appreciated. I'm so frustrated and I need a job so badly! Drowning in debt. Any help appreciated!
Thanks,
A

You're a Windows user, correct? If so, read here:
http://support.apple.com/kb/DL1455

System and User Statuses Missing

Hi All,
Does anyone know what causes the system and user statuses to disappear on the main screen of the production order. Normally we see all system statuses and the current user status like this:
Status CRTD PRC CSER BCRQ MANC SETC REL
User Status ERR
Some configuration must have changed because even though the statuses are in JEST, they are not displayed on the order.
Status
User Status
Thanks for the help,
Malissa

Malissa,
Just a different thinking to see, whether we can get some clues.
I would suggest you get into the order in the change mode, try some minor changes may in terms of operation text etc...and try to save the order. if there are some missing stuff, I am sure now SAP would throw out the error lets take the leads from there on.
Regards,
Prasobh

Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System    Microsoft Windows 7 Ultimate Version    6.1.7601 Service Pack 1 Build 7601
System Manufacturer    Intel Corporation
System Model    S5520SC
System Type    x64-based PC
Video    NVIDIA Quadro FX 4800 driver v.320.78
Display        Dell 27" LCD (DisplayPort)
Display        Dell 27" LCD (DisplayPort)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM)    96.0 GB
Page File Space    0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.

I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace

Hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??

hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??
Please could someone help???
And it also mentions mediatoolbox dll. is missing?? haha i have no idea what that means??? please help...
Thanks alot! I really appreciate your help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Why hasn't Adobe navigation and user interface design improved as much as it could have over time?

I haven't tried CS6. I'm sure it's great based on what i've seen alone. But as a user of adobe products for a number of years, i have to noticed there are still a lot of stagnant,awkward, stiff, irriating, slowing down elements found in the navigation and user interface on cs3-cs5, that i'm sure could have been eliminated or improved on at least from 2005 or 2007 onwards. I find some of these things inexcusable and unprogressive from bad traits that defined 1980's and 1990's general computer navigation and so on.
CS5.5 has lessned this a bid bit and is more fluid in bits and pieces but for those using cs3-cs5 and in general, i find some things just horrid. As a graphic designer no one is supposed to admit the flaws or irrations of these programs. We must hail them as god, never critisize, and always adjust to new things which i think is a bit fascististic and silly
The way the tools, options are laid out can be improved to be quicker, and easier to find and use. Using your voice as a commanding system would be helpful as well.
A lot of cmds are too complex to remember, they can be simplier or resemble the name of the tool or option. Its makes a chore to follow this system and competition for the smart *** who memormized all the cmds.
The way in which you loose floating side boxes, and the amount of tools or names hidden in the bars sometimes seem random and its always a constant search to find them incase you forget where they are.
The inability to open cs4 or 5 files in cs3 is just beyond extremly annoying. Whey shouldn't you be able to open cs1 or 2 files or photoshop 9 files as well? Every five years work expires as well?
The layering system gets tricky and seems that a lot of things don't work when you normally move things. Its about going back, remembering and clicking on this or that, looking it up to make everything work. Sometimes which leaves you in a rut and wastes a good amount of time. You will always find this even after you've been using it for years.
The use of the fill paint/airbrushing, clone tool, lasso tool, pen tool, history being two steps back can be vastly improved to be much better to use
Masking and tools that have more complex features should find a way be automatically done or sampled. They can also have less complex steps and tha ability to be previewed, automatic or simpler ( in case you can't remember how to do something or aren't getting it)
A lot of the special effects, and blending modes are useless, outdated, super-ugly and don't resemble true darkroom effects ( such as polarization, and bas-relief for example) which they could much more vividly done. There also could be more options that are closer to repro cameras/CTP software for halftoning and more complex digital effects.
Having to press or get used to pressing muliple keys or clicks for the most basic things simultaneously can be reduced to be easier
Adjusting text, new documents, photos should have a smoother, quicker navigational experince where things a lot of room to be , clicked back, re-done, saved in the wrong place etc..
Indesign could use more shapes, include more features that illustrator has, and possibly even photoshop to save time.
There should be a way to remind you of features, complex things you've forgotten, other than history and daily usage/practice of the programs
The help should resemble more of "visual -learners" guide books with voice features.
There are a lot more
Regarding other things:
I think the price encorages more piracy and allows people to not have a concept of what is means to owning software.
The loss of a manual or lessening of them for certain programs is a loss because it's always useful to physical info you can flip through while looking at your program.
I think adobe should make entirely better products for professionals or people in the industry rather than spoonfeeding the same software to all.
They should also make less expensive add-ons like before for graphic software.
What do you adobe could have improved over time and if so what do you think they could have improved on?

You have this wishform to suggest improvements to Adobe products:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
and the Creative Suites forums are here:
http://forums.adobe.com/community/creativesuites
This specific forum is only for discussions on the forums themselves, so you are not very likely to get any change by posting your comments here.

I just updated my MAC operating system and when I went to open a recent document in numbers, the document that opened had none of my data and was formatted differently. Can I get my document with all my information back?

I just updated my MAC operating system and when I went to open a recent document in numbers, the document that opened had none of my data and was formatted differently. Can I get my document with all my information back?

I suggest the easy stuff first:
1) quite Numbers and restart Numbers
2) reboot the computer
After that try opening the same document in another user space

Logistic system and user statuses

We process PM system and user statuses extensively. Currently we use a custom extract of table JCDS to an InfoObject with a filter set on UDate (creation date).
     We use PM status information so extensively that I expect there is some standard SAP Business Content that would satisfy this data need. For example in the newly released industry Defense Forces & Public Security business content there is a Master Equipment Status infoset for the evaluations of the status of master equipment.
     Does anyone have any suggestions on the best practice for processing logistic statuses in BW?
     Thank you very much for you time.

Malissa,
Just a different thinking to see, whether we can get some clues.
I would suggest you get into the order in the change mode, try some minor changes may in terms of operation text etc...and try to save the order. if there are some missing stuff, I am sure now SAP would throw out the error lets take the leads from there on.
Regards,
Prasobh

Operating System and Hardware Selection

My queston related to general information or general rules. As we know there are many vendors of operating system and hardwares and three of them are more famouse like HP,IBMand SUN. I want to know that for which kind of database environment, which plateform is best. as there are many kind of database environment like OLTP,DSS hybride etc. I want general suggestion about OS and Hardware selection.
Thanks in advanced

That site is hillarious.
The implication is that one can get the correct machine size by answering one, and only one, question - how many users will be connecting.
There are a few minor, niggling, details missing in that question ... for example, how does one account for the one 48 hour batch job that uses 100% of the CPU?

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.

I updated my IPhone 3GS to the new 5.1 operating system and have since had a range of problems with not only my phone but also my IPad.
Programs (Safari, mail, messages) keep crashing, mail will not delete properly (some will keep popping into my inbox again for no reason!!!), slow, settings lock up etc. etc.
This only seemed to become an issue once I updated to ios 5.1 and funnily also affected my Ipad even though i hadn't updated the software yet. I have since updated the software on my ipad thinking it might help too but that only made things worse!! So I am not sure if it's an ICloud issue, but when i try to disable ICloud my devices lock up as well.
The battery life is also shocking!!
I have hard reset both devices, restored both devices, reset the setting and tried a whole host of other suggestions (like closing background programs) on this forum buit nothing works and i am tearing my hair out.
I looked in the phone and ipad log and there do seem to be low memory reports though i don't know why these are occuring now when they never have before??
I don't know if I can restore the old operating system (If I can please let me know how). The phone or ipad are not jailbroken.

but you should have a backup in itunes.
Every time you sync your iOS device iTunes creates a backup. go check if its there, iTunes Preferences >Devices. and there you should see if you have a backup, and in case from which date the backup is.
And ofcourse you can get your icloud data back by just logging in with your Appleid under icloud in settings on the iphone.
But anyway, if the iPhone works when you restor it as new: try adding your backup, and see if the issue comes back. And experiment with your backup and try to work out what is causing the issue, my guess is that its some app! Good Luck!

System and user status to BW

Hi all,
I need to bring system and user statusses to BW (for wbs-elements and cs/pm orders). I'm fairly new to BW and I cannot find any business content regarding statusses. I have varying reporting needs where these statusses are important. Are there any pitfalls in bringing jest and jcds tables to BW. What would be the most logical place to put this information in: ODS-object or infocube? I want to do an initial full load of all these objects with their current status and status history. After that, I want to weekly load the delta's.
Any help would be greatly appreciated.
Ciao,
Peter

Hi Peter and welcome to the SDN!
well depending on your needs, you can extract all status information coming from jest and/or jcds, tj02 and/or tj30 using generic extraction and posting it into a ODS firstly. Additionally please check note 300300 from SAP. It describes how to add the status information to infoobjects.
regards
Siggi

I have Windows 7 Operating system and an HP 6500 A Plus printer. My iPad no longer prints wirelessly. An error message says the printer is offline. Suggestions

I have Windows 7 Operating system and an HP 6500 A Plus printer. My iPad no longer prints wirelessly. An error message says the printer is offline. Suggestions?

1. Turn off router, printer and iPad
2. Turn on router and wait 30 seconds
3. Turn on printer and wait 30 seconds
4. Turn on iPad and test printing

N70 Operating System and User Interface

Similar Messages

Maybe you are looking for