N70 phonebook numbers in messages

I have got a Nokia N70, yesterday out of no-where the sms/mms messages i recieved weren’t picking up the contacts name in the phone book.
I.E when receiving a text message, at first glance it would look like the sender was someone NOT in my phonebook as the number was being displayed instead of their name. But further investigation proved that the number WAS in my phonebook and had been from a number of months previous to this.
This is not just happening for one person, its happening for every person in my address book.
1. The numbers have been duplicated as i have noticed this error happens when they have.
2. I've deleted all contacts and copied them in again - no change.
3. Turned on/off
I’m running out of idea's and its driving me mad because at the moment to find out who's the number is, i have to ring it wait for it to display on the screen then hang up.
Thanks!!!
marc

Are they on the sim card as well as the phone memory? Not sure whether that affects anything as I never keep numbers on my sim.
Maybe they've been duplicated twice (some people who have sync'd with Outlook etc have had problems like that) - try deleting the contact entry you know is correct - then get it to call you again and see what is displayed - if it's still in there again, it will show a name.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

  • How to make numbers in message text input  fields left aligned?

    Hi Friends
    I have completed one of my task .but getting result right side of the field.
    how to make numbers in message text input  fields left aligned?
    Thanks
    Aravinda

    Hi ,
    Sorry for late replay i am trying this alos not set that page....
    pageContext.forwardImmediatelyToCurrentPage(null, true, null);
    and one more that kff field working is fine for ex display any text pled displayed properly and only problem is not set the value and HrSitKeyFlex6 and HrSitKeyFlex7 fields are perfectly get the values but not pront HrSitKeyFlex8 that only my issue....
    Regards,
    Srini

  • I cannot see all mobile phone numbers in Messages after upgrade to iOS 6

    I have two mobile number entries for most of my contacts, for example:
    +853 1234 5678
    0060 853 1234 5678
    The first entry is for dialing the mobile number when I am overseas, and need to use the international prefix "+". I also use this for sending SMS messages or iMessage.
    The second entry is pre-entered to use 0060 as the international prefix when dialling long distance from my home country; this enables me to enjoy lower long-distance rates.
    I have since upgraded to iOS 6, and now have a major problem. When I go into Messages and start a new message, I cannot select the number "+853 1234 5678" to send my message. It only shows "0060 853 1234 5678", and of course, this cannot be used to send messages. This seems to me that iOS 6 is not distinguishing the above two entries as two unique numbers. In other words, the "prefix" does not count. However, if I change the "0060 853 1234 5678" to "0060 853 1234 6787", then I can see both numbers in Messages (since then, both numbers are unique).
    I have since found out through trial and error that if I list the numbers in my contacts page in the reverse order, that is:
    0060 853 1234 5678 and then
    +853 1234 5678
    then, I can see +853 1234 5678 but not the first entry. It seems that the first entry in the contact list is overriden by subsequent entries of the same mobile number.
    This was not a probem in iOS 5. Any fix for this matter in iOS 6?

    tanks for ur help. it is sms. I have contacted my service providers and they said there is no issue with my messages. so I believe something is wrong with the fone.       
    tanks

  • I'm having a problem sending photos to some numbers via messages.

    I'm having problems sending pictures via messages. Some numbers (where the people have IPhones ) they go though where others as soon as I hit send they comeback Not delivered. Help?

    You may be transmitting to Apple users using iMessage.  But to transmit to non-Apple users, you must rely on your cellular carrier's MMS.
    First, you must have Settings > Messages > MMS Messaging set "On".  Second, you must have an MMS arrangement with your cellular carrier.

  • Bates Numbering Error Message

    I am trying to Bates number a large pdf file using Adobe Acrobat Professional 9, but I get the following error message:
    "an error was encountered while retrieving page content."  Has anyone else encountered this message?  Is there a limit to the number of pages in a pdf that Adobe Professional 9 will number?

    I have the exact problem.  Oddly, if you print the document and rescan, it will take the bates numbers.  I think it has something to do with "newer" pdfs (i.e., created with a newer version of adobe).  However, I have had no luck fixing it.  Would love a suggestion!!
    BTW - there is no page limit for numbering.  That is definitely not the problem.

  • "need a newer version of Numbers" error message?

    I am getting an error message that i "need a newer version of Numbers to open this document" message when i try to open a file i created with the newest version of Numbers that i downloaded a few months back. anyone know a fix?

    App icons are seldom changed as an application goes through various versions. The assumptionis that you will have only on version installed at any given time. If you do need to keep and run two versions, place the icon attached to the most often one on the Dock, and start the other from the Finder when you need it.
    Regards,
    Barry

  • Three questions about removing a numbered Mail message file

    ClamXav, the anti-virus program, has found several old messages filed by Mail.app v4.4 that are infected with various exploits. Finder shows that the filenames for these messages are numbered, followed by the email file extension, like this: 359959.emlx
    Question 1: Can I simply delete these files individually via the Finder and do nothing else, calmly confident in the knowledge that Mail.app, robust as Apple engineers can make it, doesn't care a whit whether an individual mail file is there or not?
    Or
    Question 2: Do I have to locate them via Mail's interface and delete them from there because otherwise Mail.app, so fragile, will have a fit, die, explode or wither to a pathetic whimper of its former self because I had the temerity to delete a file without genuflecting and consulting it?
    Or
    Question 3: If I have to locate the files and delete them via Mail, how do I use the file name to point to a specific message in Mail's inscrutable interface?
    Thanks.

    I'd just delete them. However, if you're worried about it, just leave them alone. They can't hurt anything.

  • Clearing/downdating stock (with batch numbers) error messages

    Hi,
    We are trying to clear down some stocks with batch numbers and have tried MB1A LT01/LT10.  However, we get the following error messages (all individual);
    Deficit of BA Unrestricted-use (Deficit of BA Unrestricted-use 56.855 KG : 4589 BP01 0088 0000199415)
    Storage unit 4000289374 is not consistent with other transfer order data
    Showing zero for stock & cannot clear transfer order
    How can we clear the stocks please?
    Thanks
    Keeley

    Deficit of BA Unrestricted-use  is a pure MM message.
    It just tells you that you have no stock of the mentioned batch 0000199415 of material 4589 in plant BP01 at storage location 0088.
    check in MMBE where or in what status your stock of this batch is, then change the fields in MB1A accordingly.

  • Numbers/Contacts/Messages deleted, so why do they still appear?

    Dear all,
    Like many of you I add and delete contacts on my iPhone.
    However, when in Messages and I type a name in the Search box, sometimes numbers and contacts appear. Some of those include names and numbers I have since deleted - my mother's old number still appears even though its not saved AND I have deleted messages from her old number too.
    Is there any way for this not to happen? It is proving a little baffling to me!
    Tobias

    The sort of information you refer to is stored in cache memory of about 2Mb on hte phone and is eventually overwritten with use.  The only way to get rid of it is to restore the phone as new and not from a backup and you loose dat aand settings.  I suggest you ignore it and with use the information will disappear

  • Numbers error message: the spreadsheet contains more formula than are supported

    always using spreadsheets and taught the ipad would make things easier but it just threw up a new set of problems.
    What specifically causes this problem to occur, are there formula to be avoided or is it the amount of formula held in a file?
    What can i do to avoid this?
    Any way around it when it happens?
    Any help or insight would be very much appreciated

    This forum is dedicated to Numbers on Mac OS X.  You will get more help in the forum for iWork on iOS.
    https://discussions.apple.com/community/app_store/iwork_for_ios
    There is an online User' Guide which may be helpful to you:
    http://www.apple.com/support/ios/numbers/

  • N70 phonebook ford bluetooth

    i have recently purchased a ford focus with voice control & bluetooth.i can receive and make calls fine but when i receive calls only the number shows up,how do i make my phonebook visable?

    Hey,
    I've found the Nokia_810_Contacts_Download_S60_3rd here : http://europe.nokia.com/A4143881
    This tool's great, now i have my phonebook synced to my JVC - KD-BT1
    They only missing thing is the sms push profile (to read SMS on the Radio.)
    I'll keep my nokia
    Best regards,
    Jean-Luc B.

  • N70 - unable to read message content past first sc...

    Unable to get past the main screen.
    After getting through to applicaitons part by pulling SD card out, saw that half the applicaitons are missiing ...
    Where have they gone and how can I restore them?
    Basic functionality of phone works - it rings and answers but thats it ...can't view contacts, messages...
    Help
    Simon

    i couldn't understand how the memory card is related to the problem but i think you shoud format your phone just to get everything in order.
    to format your phone :
    Method 1
    1) Switch off your phone
    2) Press and hold these 3 keys together:
    -green dial key
    -the star key(*)
    -the number 3 key
    3) Turn the phone on
    Do not release the keys until you see a formatting screen and even after the phone has started. Wait until the initial sound starts to play and the hand animation is displayed.
    Method 2
    on the screen type *#7370#
    you will be prompted for a Security Code. This is 12345 if you haven't changed it.
    Do ensure that you have backed up your data first onto a PC by using pc suite.
    in the case that this problem only appears only when the memory card is in place then instead of formatting the whole phone, i advice you to format the memory card only and try again..
    Fear not those who argue but those who dodge

  • Create Sequential Numbering in Message Mapping

    We are using XI 3.0 with R/3 Enterprise.
    I am working on a scenario:
    Webapp to xi to R/3 to xi to webapp to xi to R/3.
    Basically, users log onto web site, request invoice details from R/3, dispaly invoice in webapp, pay amount and post receipt into R/3!
    As we are posting an accounting document we have to pass accross the accounting document number.
    I have tried the following to generate a number for the externally assigned number:
    Constant: 9800000000 and A Counter starting from one( with increments of one) add together and map into obj_key field on accounting document header.  When I test the mapping, I get the following:
        Debug:Start tag [OBJ_KEY]
        Debug:Put value [9.7999995E9]
        Debug:Close tag [OBJ_KEY]
    Is there an easier way to assign a sequential/incremental number into mapping??
    Regards.
    Barry Neaves

    I have implemented a simple function in one of my mappings to generate  sequqnce nos. Modify the code according to your requirement
       //write your code here
    GlobalContainer globalContainer;
    globalContainer = container.getGlobalContainer();
    Integer count;
    Object obj =globalContainer.getParameter("Count");
    if (obj==null) count =new Integer(0);
    else count = (Integer)obj;
    count=new Integer(count.intValue()+1);
    String szero="";
    String str=count.toString();
    for(int i=0;i<5-str.length();i++)
         szero=szero.concat("0");
    str=szero.concat(str);
    globalContainer.setParameter("Count",count);
    return str;

  • How to turn on line-numbered error messages in ASC file?

    How can I turn on error reporting that tells me exactly on what line of my .asc file an error or warning has occurred?
    I need this in order to debug why my fmscore is constantly segfaulting, presumably caused by my .asc file.
    I know the .asc is causing the crash because when I removed a section of it, the crash suddenly stopped - but I can't figure out why it would crash at all, and it does so at unpredictable intervals, sometimes every few hours, sometimes every single time, ...
    Any help appreciated, thanks!

    use the Flash Media Server Adminitration Console, in button "live log" are shown the lines of errors.
    http://www.leonardofranca.com.br/wp-content/uploads/2009/07/console_videoondemand.jpg
    regards
    Leonardo França
    http://ww.leonardofranca.com

  • Regarding message numbers

    What are the message numbers available in ABAP. How can we use that in our code. Can anyone explain me with sample codes, it will be a great help for me.
    Thanks.

    Hi,
    Look at the table T100 for massages Numbers and Message texts, and alos look at the transaction code SE91 for the Numbers
    Look at the sample code for message numbers
         SELECT SINGLE * FROM t100 WHERE sprsl = it_messtab-msgspra
                                            AND   arbgb = it_messtab-msgid
                                            AND   msgnr = it_messtab-msgnr.
          IF sy-subrc = 0.
            g_l_mstring = t100-text.
            IF g_l_mstring CS c_val35.                          " '&1'.
              REPLACE c_val35 WITH it_messtab-msgv1 INTO g_l_mstring.
              REPLACE c_val36 WITH it_messtab-msgv2 INTO g_l_mstring.
              REPLACE c_val37 WITH it_messtab-msgv3 INTO g_l_mstring.
              REPLACE c_val38 WITH it_messtab-msgv4 INTO g_l_mstring.
            ELSE.
              REPLACE c_val39 WITH it_messtab-msgv1 INTO g_l_mstring.
              REPLACE c_val39 WITH it_messtab-msgv2 INTO g_l_mstring.
              REPLACE c_val39 WITH it_messtab-msgv3 INTO g_l_mstring.
              REPLACE c_val39 WITH it_messtab-msgv4 INTO g_l_mstring.
            ENDIF.
            CONDENSE g_l_mstring.
            IF NOT g_l_mstring+0(8) = c_val40.     " 'No batch'.
              g_cnt = g_cnt + 1.
              WRITE: /1 g_cnt,5 g_l_mstring(100).
            ENDIF.
    Regards
    Sudheer

Maybe you are looking for