N70, please save my soul!

i am having all kin of messy behaviour from my n70 music edition with firmware v5.06.38.3.0.1 which is latest. but i loved the design n everything so much i hate to leave it and buy any other .cause cant see anyother around with so elegant design.please help me .
prblems -
1.the phone restarts automatically of its own chosen time.its an obvious thing to happen when i write sms or press some buttons repeatedly.
2.the phone sometimes freezes and no other way to recover except removing the batery
3.sometimes cant see missed call when its a short miscall
i tried to format the phone with three button procedure ( green , * , 3 ) but even after format these problems persisted.
please give me the links of any patch if available for solving these problems. or anyother help . please help me .dont wanna loose this phone

maaan .. i m from bangladesh and there r no nokia authorised support center there . shame on them .
updating through website is very risky.i heard phone dies if the slightest things go wrong . and the problem is i fell in love with the phone so i just dont wanna chnge it maan .
is there any nokia guy know wahts wrong ? hardware problem ? i heard on other forum lots of ppl crying with same problem ... any solutions ?

Similar Messages

The last 'An' update has bug; An error occurred. Please save your work and restart Edge Animate

After the last Edge Animate I started to get this error: An error occurred. Please save your work and restart Edge Animate. Anyone else having this issue with version 1.5.0.217.23270
I'm using Windows 7 Profession 64 bit.
24 gb ram
At the time of the error on timeline, around 21 second frame, only 4.82 gb of ram was being used and CPU was using less that 10% processing. No spikes.

Elaine,
On the webserver its running fine for being partially completed. http://dirtyhumanoids.com/publish/web/TonalpohualliAndTheEyeOfProvidence.html
It's crashing within Animate on all 3 copies.
Copy 1 was created and saved before last upgrade (no .
Copy 2 of this file was created before the update and saved a few times before and after the upgrade.
Copy 3, is just trying to figure out what went wrong with copy 2. BTW, Copy 1 is also having the same issue.
The only thing I can think of that I might have messed up on was creating a picture into a symbol much late in the project.
I wish I knew how to video record my desktop so you could analysis my Edge Animate.
Regards,
Matt

"An error occurred while opening the file dialog. Please save your presentation, exit, and restart PowerPoint."

In PowerPoint 2013 on Windows 7 - 64 bit, when
File / Save as is selected, an error message comes up stating, "An error occurred while opening the file dialog. Please save your presentation, exit, and restart PowerPoint." This is an intermittent issue and also
affects Excel 2013. I have tried repairing it, done windows update and also uninstalled and reinstalled but no luck. I have researched this issue but it relates to Office 2007 and 2010 and the resolution does not support 2013.
Has anyone come across this issue? If so how did you resolve it?
Many thanks….

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

"There is not enough virtual memory available. Please save your work and restart {0}"

This seems to be the most recent similar post. Prior posts are not useful as they have supposedly been fixed. The most relevant Microsoft connect case has been closed. The reported new Microsoft connect case has been deleted without explanation.
https://social.msdn.microsoft.com/Forums/expression/en-US/294b17e4-c986-4dc3-9fa6-b246a50a4339/vs-2013-update-4-there-is-not-enough-virtual-memory-availableerror?forum=visualstudiogeneral
Yet, still the problem persists. Only working on one small XAML file. VS2013 and Blend always report "There is not enough virtual memory available. Please save your work and restart {0}" (except when they report "Package 'DesignPackage'
failed to load" when run in safe mode) Saved my work and restarted VS2013, Blend, and the computer. Followed all other suggestions as much as possible.
There is an abundant available and virtual memory. The only changes from last week to this is Microsoft updates.
Has there been any new effort on this issue that I have missed?
What is left to do?

Get IT to do it. Get them to uninstall all the latest updates, since you can identify them as a proximal cause of the problem. Also, search MS Knowledge Base or do some googling for the exact error text.
We have no tech support resorces; we're just users.
A horse walks into a bar. The bartender asks "Why the long face?" "Because I was born into servitude and when I die my hooves will be used to make glue." It was at this point that the bartender realized he would not be getting a tip.

Please save my FreeHand :(

My FreeHand 11.0.2 was working fine under 10.5.4 (Intel
MacBook), until I installed a security update 2008-005 (at least I
suspect that's the reason). After that FreeHand jumps in the dock
and nothing happens, a common problem (sigh) the answer to which
was a HotFix here
http://www.adobe.com/go/tn_18933
I'm not sure how to use that hotfix, I've just double clicked
it and it said success, but FH still didn't work. Then I found out
that a PPC process named AuthenticationS(ervice) blocks 99% of my
CPU while FH is trying to start. The Console also had some lines
about that. I killed the process in the Activity Monitor (it asked
for the admin pass) and then FH did start in the background. I've
tried that several times and had to start it that way.
Then I googled for macromedia authentication and found a lot
of problems. Anyway, I wanted to wipe out every instance of
AuthenticationService from my machine (the Macromedia problems
should be solved by thrashing the Macrovision folder, etc) and I
did delete it from Library/App support, User Library/App support,
FH contents/Shared support etc... Then FH refused to start with a
warning that it's architecture isn't supported. Then I deleted FH
and reinstalled it (no boxes for serial number or anything came
up), but this time
4-5 AuthenticationService processes were blocking 99% of my
CPU and I couldn't kill them, or when I did manage to kill one,
another one popped in immediately, and it only stopped when I quit
FH app. HotFix doesn't help. I've tried to reinstall it numerous
times, delete it with AppZapper, only delete certain
AuthenticationService files, nothing helps... Please save my
FreeHand, I know there are alternatives like LineForm or Inkscape
or Intaglio or Illustrator or whatever but I want my FH back!
:(

Hello adobebody,
A year ago I experienced the same problem. Thought I’d
lost my Freehand forever until I stumbled across a solution.
Here’s a post I later made to someone that was having a
similar problem. I will reprint the whole thing instead of trying
to edit it to fit your situation. And pardon me if this fix has
already been suggested.
Good luck getting your Freehand back!
I may be able to help. On Monday morning my Freehand 11.0.2
went into a coma, exhibiting the same symptoms you describe, with
the added feature of Photoshop (9.0.2) going bad after everytime I
attempted to launch FH. Only a restart would get PS going again.
Freehand -- nothing would get it going.
I spent a good part of 2.5 days trying every trick I know to
get the damn thing to launch with no success. I reinstalled
Freehand, Photoshop and Mac OS X 10.4.10 combo updater, more than
once; ran Disk Utility, DiskWarrior and Onyx multiple times;
deleted and/or replaced with older versions from my backup drive,
many different .plist (preferences) files; and a whole bunch of
other stuff suggested on Mac help sites. Including from Adobe:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_18933&sliceId=1
Which didn’t work for me, but you should try it. Who
knows?
Anyways, still no FH but looking at the Activity Monitor (
FINDER > Go > Utilities > Activity Monitor ) I discovered
that whenever I tried to launch FH it stalled (and became an
“inactive process”) and another process called
“AuthenticationSe” led the list for CPU usage but did
nothing and the computer had to be restarted to regain stability --
stable except for the FH problem of course.
So an “Authentication” issue, and the activation
glitch mentioned in the Adobe link above, eventually led me to the
solution (won’t get into the how and the why because I really
don’t know).
Unfortunately this requires that you have a backup of your
system from back when Freehand still worked. If you don’t,
sorry about that -- hopefully the HotFix above worked, or someone
else has a suggestion based on the following idea:
Restart your computer, repair permissions, verify your disk,
repair disk if necessary, standup and shout FREEHAND ROCKS, restart
again, then....
Uncover a folder called “Product Licenses” on
your startup drive.
Macintosh HD > Library > Preferences > Macrovision
> Safecast > Product Licenses
The folder looks empty, but there’s got to be something
important inside that you can’t see. Replace the Product
Licenses folder on your startup drive with the Product Licenses
folder from the same location on your backup drive or disk (from
when FH worked). Maybe don’t let the folder on the startup
drive get overwritten by the older version, but remove it to the
desktop -- just in case you need to put it back.
Now try to launch Freehand. If this works you’ll get
the startup screen (yay) and the message that you need to activate
your software and you’ll be taken to an Adobe registration
page and there you go.
Good luck.

An error occurred. please save your work and restart edge animate! First time I try to open Edge Animate.

I just tried starting on an Edge Animate project for the first time. When I open the application the splash screen does NOT show up. So I pressed cmd-N to create a new file, this created a black file without any measurements, and when I try to set the height and width the error (An error occurred. please save your work and restart edge animate) pops up. I tried reinstalling and it didn't help. What should I do?

Hi ,
You can check the steps here - http://www.switchingtomac.com/tutorials/how-to-edit-the-hosts-file-in-os-x/
Regards,
Sudeshna

I searched for "Download FireFox 5 - got the following results: Found 1023 results for download firefox 5 in English. Please save me from having to wade through 1023 results to locate this download!

I searched for "Download FireFox 5 - got the following results: Found 1023 results for download firefox 5 in English. Please save me from having to wade through 1023 results to locate this download!

Why do you want the 5.0 version and not the just released Firefox 6 version?
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-5.0/

SOS! SOS! My system is stuck by Norton Ghost! Please save me

Alright, i initiated norton ghost to image my system and everything went up in smoke!!
My computer got stuck on the : Booting from PC DOs screen and would not load ghost to proceed to the image.
i tried reseting the computer and it'll just get stuck there!!!
eeekk...i spent 4 days installing the sytem and i really really do not want to format it it again...
someone please save me

hmmm first how bout some system stats..
is your psu up to spec( yeah yeah i know usual scape goat question) biut it is highly recomended that you have a healthy 20+amp 12v rail.
you mention scsi..
i saw some threads that a certain model adaptec card had some problems.
i have read in maxpc magazine that norton ghost had some problems with a sata raid array(needed to add a /plus some text code to work) maybey that is a question for norton tech support..puely a guess though.
it reallly shouldn't be that hard to set up your system though...
if your memory and psu is fine, try unpluging sound card..usb devices, check for grounded case( did you use the bhrass stabndoffs tro mount your mobo. is your psu overloaded by 8 drives a heavy duty graphics card etc.. try to go to basics and go from there.
did your windows system have scsi drivers loaded? may need f6 install from fresh..
can you see the drive in bios... is bios boot order correct..
is cableling good.. tried other capples, check for creases, missing power etc..

Lost memory icon on n70 - PLEASE HELP

Please don't laugh. I have just bought an unlocked second hand n70 and then bought a memory card for it. While messing around I managed to remove the memory icon from the tools section. Now of course I cannot gain access to the card. I would be grateful if anyone could manage to stop laughing long enough to advise me how to reverse my stupid mistake.
Thank you

You'll have to do a hard reset: http://i128.photobucket.com/albums/p196/hitting_ray/SANY0546.jpg --- * + 3 + Green + Power Button until the phone asks you for your timezone.
N97 Mini- RM 555- v11.0.045

Please save my wedding slideshow!

Hi,
I get married on 22nd July. I wanted to play a slideshow at the venue of family/friends/loved ones in backround. I created this in iphoto originally, but last week, to my horror, when i exported it to idvd it was all jerky and rubbish (using lots of Ken Burns pan and zoom). So gave up on that and have spent the last few days creating my slideshow in imovie.
My trouble now is, everything was working fine, i had all the photos lined up in the timeline viewer and was adding the relevant transition and pan effects etc when i stopped and save. When i went back in awhile later to continue, I cannot continue where i left off (half way through) as whenever I select a photo to edit-with the media button pressed and photo tab highlighted so "show photo
settings" button is revealed, all i get is a black screen?!
So to reiterate-the photo is selected in the timeline viewer, i click show photo settings (so i can add my pan and zoom) and all i get is a black screen. The first half of the slideshow is unaffected.
Please help me!!!

When you empty the iMovie 6 Trash, there's a bug that (inappropriately) discards the copy of the source image iMovie stores inside the project. That makes it impossible to Update the clip later. When you try, that turns the clip black.
Lots more here, with some workarounds:
http://discussions.apple.com/thread.jspa?threadID=392740&tstart=0
Karl

Problem to my N70 please help me

My N70 fails to function at regular interval(phone fully dead and not even able to swith off) and restarts after some time.Again after some minutus it repeats..please help me

Hi ksjinesh
Provided that you have backed up your phone data you could try resetting your N70 *#7370#
Happy to have helped forum in a small way with a Support Ratio = 37.0

HELP! Can someone with CS2 please save my file as a .inx file?

HELP! I have CS3 and I need to save an InDesign file created in CS3 as an .inx file that can be opened in CS. I found out the only way to do this is to open it in CS2 and export it as an .inx file, but I don't have CS2.
Will someone out there with CS2 save the file as an .inx file for me please if I e-mail it to you?
Thanks!

Click through my name for email info. But be warned that there may be serious text reflow due to the differences between the text engines, and anything using the features new in CS3 will be lost or badly damaged.
Al

Please save the world some time!

Hi Everyone,
I'm new here so I dont know if this has been discussed before.
I always wondered that no matter how fast you are at typing sms's it is always quicker if you could talk to the phone and a speech recognition mechanism would write down the word for you, with the possibility of editing later on.
We have the technology for it so why dont we save some time to the whole world!

This isn't the place for suggestions like that - it's been mentioned several times before on these boards, if it was, I can't imagine anyone would be inspired to provide any sort of helpful response to an attitude like that.
You should submit your ideas via the Contact Us link at the top of the page, or by emailing it to [email protected]
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

HUGE "Media Offline" Problem. Looking for life raft. PLease save me

So I think I may have deleted about 60 Gigs of video and I'm curious if anyone out there might be a wizard in the dark, and might be able to save me from drowning in my own despair.
The situation:
I've been capturing clips into iMovie and then transferring files from the iMovie Media bin into the Final Cut Express bin. I have also been putting items into my trash bin all along that I didn't want. Recently, I saw there were trash items in iMovie and it asked if I wanted them anymore. I checked to make sure all the files were also in Final Cut Express bin, and then said ok. Now half of my media is offline. Is there any way of getting it back? Any sort of Trash Recovery program for Macs? Anything? ....
Thanks again,
Yours Truly,
A Drowning Soul.
P.S. I have a 16 day deadline. That's even hard to write, let alone think...

If by moved them into the FCE bin you mean a bin in the browser then you didn't do anything except tell FCE where the material was. If you then delete the material it's gone. There is no way to recapture iMovie material because it has no timecode. You might want to do a finder search just to see if some of the clips are still on your hard drive, but if they're not you'll have to recapture the material.

Please save me I do not want to waste my money anymore

Hi, I have just bought a Macbook Pro Retina 13" this August online, however, I found it even more terrible than my old 13" inch that is not retina one( already broken because of something inside I have no idea) it do tasks very slow. Also most of my web browsers are having problem even though I do not do anything to the computer. I have just bought it and right at the first time I opened the safari, bunch of the websites sometime just pop up from somewhere which interrupt my work so much whenever I try to click the links. Also with google chrome, when I open youtube page, in about 1 min, the whole page become white, only the video left, and it turns out that everything has been pushed down and down, also there are another problem that I can not make a document with google drive. With the firefox, I got crashed a lot of time, sometime I can not even use my key board right. When I try to command+Q to quit it when it just not respond, it does not respond to my command. This just annoyed me so much since I have to pay a lot on this computer but it really disappointed me. I really do not want to buy another computer, I do not know if it is because I am a student and buy the machine with sale off that's why they give me this machine or it is because it is how it should be. Could anyone please help me to explain what is happening with my computer right now? I do not want it to become the same problem as my old one. Thank you very much.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

N70, please save my soul!

Similar Messages

Maybe you are looking for