N70 unable to connect phone to compter via USB hel...

Brand spanking new N70, downloaded PC suite however not able to connect phone to compter via USB to transfer music. Can anybody help?

Hi bento
When you install PC Suite for first time there are TWO seperate processes, firstly installing PC Suite then returns to desktop and then secondly establishing connectivity during which "Nokia Connectivity Cable Driver" and "PC Connectivity Solution" installed.
You could go to Setings > Control Panel > Add/Remove Programs > Repair and see if this helps
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik

Curve 9380 unable to connect to the internet via wifi

I'm using curve 9380 and unable to connect to the internet via my home wifi, there is no blackberry logo beside the wifi signal symbol. I don't have this probelm if I'm using my laptop or curve 8520 to connect to the internet via the same wifi router. Please help. Thank you.

Check firewall, if you're on wifi then try ethernet to rule out interference. It is likely a network issue.

A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1

A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1. How can I fix this?

Is it an Airprint-compatible printer, and is its WiFi enabled if it is? (see: About AirPrint)
If it isn't an Airprint supported printer, then you need a 3rd party driver on your iMac to print from an iPhone. Such as Printopia. As it worked in the past you probably have such a printer driver installed; check and see if it's running.
Beyond that try restarting the printer, restarting the phone, restarting your router, and restarting your computer.

Phone only charging via usb

Hi,
I have a problem with my blackberry. A couple of weeks ago it stopped charging via wall socket charger. After trying a couple of different chargers and still not charging I contacted my service provider who brought it in for repair. After about a week I received the phone back from repair. They did not repair the phone because they said it would be a chargeable repair. I asked them what the fault was and they said the charging port on the phone had water damage but I can't see how because it has been no where near water. I tried the phone again with different chargers but still would not charge. I then tried a usb charger via pc and the phone now charges with no problems. So now I'm charging the phone with a plug in socket with usb connection. I Phoned my service provider to say the phone is charging via usb and the phone must have a hardware fault, But they are still saying that the phone is damaged and it is a chargeable repair. I can't see how if it is charging normally via a usb. Please can you confirm if the phone would have a hardware problem.
Thanks

Hi and Welcome to the Community...apologies for the delayed reply...hopefully you already have this sorted, but just in case!
As described, this sounds quite odd indeed. I would not expect behavior in the manner you describe it. But, since this is a user-to-user community and not a formal communication channel with RIM, all I can give you is my opinion based solely on what you have said. Nevertheless, at an internet distance, it would be impossible to contradict what your warranty service provider has told you, even if I find the situation to be quite strange from your description.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

Dear Community,
how can I connect SCSI tape recorder via USB to iMac ?
Is there any adapter/converter on the market now ?
Cheers, Marek

Thanks Jan.
Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
Best regards,
Marek

How do I set up my iPhone 4s to sync automatically to iTunes when connected to my iMac via USB?

    How do I set up my iPhone 4s to sync automatically to iTunes when connected to my iMac via USB? Currently it only syncs when I manually click on sync.
    Somehow I do have my 5th gen. iPod set up to sync automatically with the same iTunes / computer. But I do not actually see a checkbox for either device.
    (yes, the 'prevent devices from automatically syncing' is unchecked)
thank you!

Turn off mobile data?
Talk to your carrier about the usage increase.
Googling provides many tips- https://www.google.com/search?q=reduce+iPhone+data+usage&ie=utf-8&oe=utf-8

My HP Deskjet 1055 was connected to my laptop via USB and wiould not print immediately.

My HP Deskjet 1055 was connected to my laptop via USB and wiould not print immediately. However, when the computer was restarted, the printing job started. Please help me with a solution.

The problem is with your computer's USB port as it is powering down to save power. You need to turn this off. Go here. http://www.ehow.com/how_6818080_turn-port_s-power-save-option.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My ipad is not charging while connected to any device via usb cable

my ipad is not charging while connected to any device via usb cable

If you mean that you've connected it to a computer's USB port then a lot of computers don't provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.

My phone wont connect to my imac via usb

I have a 2010 imac & an iphone 5s. When I connect my phone to my computer via usb, nothing happens. If I use the same cable with a wall charger, phone charges as normal. If I connect to my work mac, phone will charge and sync as normal (but being work, I don't back up to their machines). I've tried all 4 usb ports on my computer, same null result. USB works normally for everything else, including charging & syncing an old ipod. If I use a non-Apple approved cheapo cable, it simply tells me that the cable will be unreliable, but still will not sync or charge over this unreliable cable. Cheapo cable works fine at work & with wall charger. PRAM was reset as normal Apple SOP. Suggestions?

Yup...everything is up-to-date, still nothing. It's weird because every component works normally in every other situation. I only have the 2 usb/thunderbolt cable, but they don't exhibit an error in any other situation.

OD users unable to connect to a server via afp

We have a Mac OS 10.9.2 with Server 3.1.2. We are able to access the server for file sharing via smb with OD accounts just fine. But we are unable to connect to the server using afp with any OD account, only local system accounts. I have tried turning off SMB for all of the file shares, but this did not help resolve the issue.
The log shows a login attempt immediately followed by a logout.
Aug 7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Login -----" -5023 0 0
Aug 7 13:40:33 server.company.com AppleFileServer[736] <Info>: IP 192.168.101.2 - - "Logout -----" -5023 0 0
I did edit out the user and the server name.
Any help would be greatly appreciated.
Thank you.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

HT4623 Unable to connect 4S to itunes via cable

Unable to connect to Itunes via docking station

An Apple docking station? What is happening or not happening when you try and connect?

Unable to connect to PC Suit via bluetooth

I Have a Noia 6233 And IVT Bluesoil Bluetooth dongle installed on Windows XP pro SP 2.
When I am trying to connect to PC suit via bluetooth i gets a warning "cannot use connection type. Check that all needed hardware, software, and drivers are available" When I have checked system information through - help- about nokia pc suit I found detecetd bluetooth stacks as - Microsoft (Version: 5.1.2600, Build: 2180)only
I have nokia PC Suit 7.0.9.2 and blue soil version 1.6.1.4 release 050606 and stack version 05.04.05.20050408.
Plz Help me me to get out of this trouble asap.

I have the same issue.
I'm trying to use PC suite (downloaded from nokia site as the proper one for 6230i rel 7) connecting 6230i via bluetooth. Pc and phone are "associated" but when i launch the PC suite I get an error message: "It is not possible to recognize the phone".
I read a lot of post but nobody seems to have solved the issue!
From Bluetooth application I can read files on pc ... so che bluetooth connection seems to work properly; it appears as a PC suite bug .. really boring!
Nokia team can help us ?

Unable to connect phone with pc-help

iam unable to connect my pc with the blue tooth

More information needed??
What information....read this first:
/discussions/board/message?board.id=pcsuite&message.id=160

My brand new Xperia Z2 won't connect to the PC via USB cable.

My PC is running XP 64bit OS, my old Xperia U connects fine through the same USB cable and my Xperia Z2 recognizes flash drives connected to it via the supplied adaptor cable... Any ideas guys? does the phone perhaps not like my old version of windows?

Hi Jake, thanks for the response.I gave your suggestions a go and found that restarting the PC with the phone already connected via USB caused the phone to briefly flash up "connected to computer" in the notifications bar.This occured immediately on start-up of the PC, during motherboard Bios, and dissapeared as soon as windows began to boot up. Upon windows starting, no mention of the phone is found anywhere under "my computer", device manager or in the task bar... More on the issue...the very first time i connected the phone to the PC, the computer was already running. The phone immediately asked me if i wanted to install PC Companion 2.1. Following the installation, the connection just went and hasn't come back since. I have noticed that PC Companion will not start on my PC. I've tried re-installing it several times from Sony website but when i try to run it I just get an hourglass for 5-10 seconds, then nothing. checking back through the system requirements for Pc Companion I've noticed that it asks for every OS except mine (XP 64bit)... could this be the problem with the software not running and perhaps the phone not being recognised?

N70 unable to connect phone to compter via USB hel...

Similar Messages

Maybe you are looking for