N70 Wont update firmware :(

Hi all.
Is anyone else having trouble updating their N70?
When i try to use the software it says im already running the most up to date version of the firmware however people in other threads are saying they have considerably higher version than mine.
My fone says it is...
V 3.0546.2.3
18-11-05
RM-84
My code is 0529237
Before i tried to update i downloaded and installed the latest versions of PC Suite, Cable Driver and NSU.
Is there anyway to manually download/update my fones firmware?
Any ideas/help much appreciated.
Thanks in advance,
Dave

Nokia is the one who builds new firmware based on operator requests, but Nokia cannot distribute it before operator (in this case O2) has approved it. Without knowing specifically what is the issue in your phone I would suggest you to be in contact with local Nokia Service Point or to your operator to check if there is newer fw available that way. If no success, I'd suggest you keep bugging the operator, so they will either approve new fw or pressure Nokia to make new one... (dunno which one is the case here)BTW, have you tried to call or email to Nokia Care? They may be able to help you fixing your issue even if there is no new fw available.
Unfortunately there is no way to manually update your phone fw. If you try to do some 'experiments', you may end up into situation where you lose the warranty, or in worst case - dead phone.

Similar Messages

  • Itunes wont update firmware on i phone

    itunes wont update firmware on ihpone 3g running 4.2.1 version

    Connect iPhone to syncing computer using USB cable.
    Start iTunes on syncing computer.
    Follow prompts from iTunes to upgrade.

  • Ipod Nano wont update firmware

    Hello,
    I have a dialup connection and although, I can download video content, and the new apple itunes 7.3, I have not been able to get my ipod nano to update the firmware version from 1.1.2 to 1.1.3.
    I will either get kicked out during download, or get an error message related to verification of the file.
    Is there a separate way to download the file directly, or do I have to use itunes.
    thanks
    PC running window$   Windows XP Pro  

    In the restore instructions it says that you need to plug the iPod into a power adaptor during the second stage.
    Not really.
    Actually it says,
    "iTunes will present one of two messages on screen with instructions specific to the iPod model you are restoring.
    * Restore Instruction 1: Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    * Restore Instruction 2: Leave iPod connected to computer to complete restore (typically applies newer iPod models)."
    You will get Restore Instruction 2.

  • USB 551L wont update firmware correctly. VZW tech plz help!

    Ok, so when i go to update my usb 551l, this is what occurs, http://i1111.photobucket.com/albums/h461/Terry_Horgan/Capture-20.png
    I have tried everything, my device is not updated to the current firmware, and this program will not open to do it either. Please help get this fixed. It should update it, I have done it before on a different computer, right after a fresh restore.
    PLEASE!

    My 551L connection reliability was so bad I could not complete the firmware download so I took it to my local Verizon phone store. They did the latest (1.48 4/30/2012) upgrade. Do not expect any improvements. This thing remains an unstable piece of junk regardless of the firmware version.

  • Nokia N70 wont update. Says USB disconnected, clea...

    Tried PC Suite and NSU retail on a Win7 ult x64.
    Starts process and says usb disconnected but it hasnt.
    Have updated certificates by spoofing date but cant overcome this error. Any ideas???
    Thanks.

    solved! needed a sim!!!!!

  • When trying to update firmware on nano 3rd gen i get error -23

    What is error -23 i can't seam to find anything about this... its really anoying as my ipod wont update firmware or restore... have tried deleting itunes and reinstalling etc.. even attempted on a different pc without itunes installed, IE installed itunes but still same error when trying to update to new firmware.... could someone please help me with this anoying issue.
    Cheers

    I just tried redownloading from itunes and installing and I got a messages saying installation was successful, but then right after that I got the following error message:  iTunes was not installed correctly.  Please reinstall iTunes  Error 7 (Windows error 127)
    Any thoughts?

  • N70:cant update the firmware

    got n70 v5.0609.2.0.1, and try to update firmware via nokia software updater(by pc) to v5.0616.2.0.3.but the updater reply with msg that my phone is up to date.
    my code is 0530339.
    some1 hlp me plz

    I have the same issue, I think it may be something to do with your opperator. If your Tel.co. does not have an updated version of the firmware for their devices, you wont get an update.

  • I have a late 2011 macbook pro and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated

    I have a late 2011 macbook pro running OSX Lion, and it wont update the firmware to 2.7, it downloads the update then says its installing it but when i go back to software update it keeps coming up saying it needs to be updated. Im wondering what can i do to stop this or get it to update.

    Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.

  • Did not update firmware before installing tiger now imac wont turn on....

    I bought tiger for my imac dv g3 400mh computer and bought additional memory from crucial so that it would load on.
    I got a message on screen saying that I needed to update firmware and to restart my computer which I did and now it will not turn on. The power button is on but the screen is blank.
    I have read an article posted on here and I tried everything (the sleep/wake trick)etc but it still will not work.
    any help will be appreciated.
    joby

    Welcome to Apple Discussions!
    Fortunately your Mac has a VGA port in its back panel, which should work to connect an external display while you apply the firmware after the fact. So find someone who has a VGA display, and download this firmware update and apply it while booted off the hard disk.
    http://www.info.apple.com/kbnum/n75130
    It is only the internal display which goes dark if the firmware was not applied before attempting to install 10.2 or later.

  • Can't update firmware for Ipod Touch on my PC

    I have a 1st gen Ipod touch & windows xp. I have the latest itunes.
    It will not let me update the firmare, but I can sync fine.
    To update the firmware, I give it to my husband and he can do it from his computer. Then I can sync with no problems. It's just the updating firmware that causes the ipod to crash (1602 error, but occassionally other numbers).
    We thought it might have been that I didn't have USB 2 ports, so I bought a USB 2, 4 port card, and my husband helped me install it. Unfortunately this did not solve the problem and it still wont let me update. I thought perhaps because the usb 2 card came with driver disks, it might need a driver. But I checked the driver disk and it contained drivers for strange things I didn't have. Then I checked the internet and it said that with xp the drivers should be automatic with windows update, and mine is all updated, I checked.
    I've checked my devices manager list, and the list only contains one "enhanced" usb port, even though the card I have has 4 ports, but maybe I am not understanding how the devices list works.
    Just to clarify, have had the same problem with 2 ipod touches. My orignal one got a cracked screen (one crack so covered by warranty) and I received the replacement ipod touch yesterday, and I still could not update the firmware on my PC. My husband had to do it on his PC (vista).
    Thanks in advance for any suggestions. I really would like to be able to update the firmware on my own PC, it's geting extremely annoying.

    Because I cannot sync my music to my iPhone without updating on my PC which has all my iTunes. Where should I have posted my question to get the help I need?

  • Argh. wont update!

    ok, so heres the problem. i have never had a problem with my ipod nano until now. i got a new computer, and i transfered all my music, installed itunes, and put all the music into itunes. i plugged my ipod into the computer, and it wont update, so i restored it, and tried to update it again, and it wouldnt update still. now the screen has a folder with an explanation mark, and has www.apple.com/support/ipod, and there is no colour, it is just black and white. when i open up 'Ipod Updater 2005-09-23' with my ipod connected , it either freezes, tells me to plug in an ipod, or tells me another program is using my ipod.
    Any suggestions would be helpful!

    I just got an iPod Nano 2GB. I installed the software, ripped some songs from CD and got a corrupt file error from iTunes. The Find New Hardware Wizard said "the specified device does not exist as an installed device", whatever that means. I tried putting it into disk mode, ran the Updater, and am now seeing the dreaded "Firmware error". I've disabled everything I can think of, and it's still happening. I just got the darned thing and am so impatient to start using it! <grin> Does anyone have any other suggestions or should I return it for service?
    Dell Inspiron   Windows XP  
    Dell Inspiron   Windows XP  

  • After Updateing Firmware defult password is What?

    Sir
    i have router RV215W and i was update my router firmware to 1.1.0.5 . After finishing updation my router was restart than after i found wifi name is "ciscosb1" but old password is not work . So please tell me the defulted password after updateing firmware .

    Hi Udayaraj,
    Even if you do a firmware upgrade the password wont get changed until and unless if you do a device factory reset.
    once try cisco/cisco or admin/admin.
    Thanks,
    Phanikrishna

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • I want update firmware 2.9 but apear this message "This software is not supported on your system."

    hi
    I want update firmware .details my system is
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro9,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.5 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
      Boot ROM Version:          MBP91.00D3.B08
      SMC Version (system):          2.2f38
      Serial Number (system):          C1MHQC17DTY3
      Hardware UUID:          EF0C6F81-20AD-50FA-9DD5-C8E084DF8E8C
      Sudden Motion Sensor:
      State:          Enabled
    but when install the last update MacBookProEFIUpdate2.9 i got error like this
    "This software is not supported on your system."
    please help me thanks

    OK, so the firmware is the same as mine, and yet Apple Support offered this EFI and SMC update packages, which should give a message that our computers are updated. 
      However, the update packages fail to run. 
      Did Apple neglect to give the correct update for the mid-2012 issue of MacBook Pro 13-inch?  I have the i7 Intel processor, instead of the i5, and I was sold this unit as having two processors, but the System info only lists a single processor. 
    Is one of the problems with Intel-based MacBook Pro units that the integration wasn't without bugs that cause processor hang when running the OS Lion, even with updates to 10.7.5?
      Shouldn't the EFI and SMC updaters run on these machines as stated in the Apple Support article? 
      What will Apple do for these customers?

  • How to install OS 9.2.1 on G3 with no OS; says needs updated firmware, how?

    I am trying to install OS 9.2.1 in an old G3 which at present has no OS in it.
    The screen says it needs updated firmware to do so. When I try to follow instructions, it tells me the CD is locked, which is obvious since it is an installation CD. Other instructions seem to assume there is already an older OS in the machine to update. Anyone with an idea of how to break this log jam?
    [email protected]

    Hi wmarina !
    Welcome to the Discussions, and Happy Thanksgiving!
    The only G3 that will give you a Firmware Update warning when trying to install OS 9, is a Blue & White G3 tower.......
    If that's what you have, then getting OS 9 onto it is a bit of a Catch-22, Can o' Worms, P.I.T.A., or whatever other favorite sayings you may have for a difficult job........
    "Other instructions seem to assume there is already an older OS in the machine to update."
    Very astute observation, and 100% correct.
    The OS that is assumed to be on the B&W's drive is MINIMUM 8.5.1, and therein lies the Catch-22.....
    A BOOTABLE 8.5.1 Install CD is NOT available as a RETAIL CD........
    The Retail CD is 8.5 install, with the 8.5.1 UPDATER, which is also on the CD.......
    The 2nd part of this problem is that the Firmware Updater (which is on the OS9.1 CD) MUST be run from the booted Hard Drive with 8.5.1 on it.........
    Your options are:
    1. Find a set of the ORIGINAL SOFTWARE CDs that shipped with a Blue & White G3, and install the original OS from there.........
    2. Do what I had to do. Take out the Hard Drive and move it to an older Mac (i.e. Beige), and install OS 8.5 on it, and update it to 8.5.1, take the Hard Drive out and re-install it into the B&W again, boot to it, and do the Firmware update at that time.........
    Note that NO Mac can boot to an EARLIER version OS than it shipped with when new, which is why you will have to use a beige to install 8.5.1 to that hard drive........
    As a secondary note, to avoid more problems, get a new Pram battery (1/2 AA 3.6V).
    Available at any Radio Shack.
    Good Luck !
    Kevin
    G3 1.1Ghz B&W, Digital Audio G4 Dual 533,G3Beige,8600/G4-800, 7600/G3-300, 6200 Ret.   Mac OS X (10.4.3)   ATI RADEON MEs: 7000, 9200, 9800, nVidia ? 64MB

Maybe you are looking for