N72 Auto Cam and applications Start/Stop Problme

Hi
I got a problem with my N72, i cant understand what happened please help me to resolve it.
Its Cam auto starting and stopping and other installed software applications as well with gap of short period of time. its not only disturbing me but also consuming battery rapidly

Drag Garage Band to the trash.
Go to: System Preferences > Account > Log In Items
Use the +/- signs to add/delete programs started at log in.
Joe

Similar Messages

Hi, i have lost my camera and applications icons! I have syched my phone, which is what they told me at the phone shop, but they have not returned! Does anyone know how to get these back up?

Hi, i have lost the camera and applications icons off my phone. the phone shop told me to synch my phone on itunes, which i have done but they have not returned. Could anyone plz help me?

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

My iPhone 4 fell down on my bed and not starting (stopped working)

My iPhone 4 fell down on my bed and not starting (stopped working)

Thank you RAZMEE209, i tried in the same way but could not worked out, than i put on Charging. Automatically asekd me to connect to iTunes and than restored all new software. thnx again

My camera and iBooks have stopped sending emails, the function and ability to create the email is still there but my iPad will no loner send the email or even store a draft on my account to suggest the email was ever written; please help I need thability

My camera and iBooks have stopped sending emails, the function and ability to create the email is still there but my iPad will no loner send the email or even store a draft on my account to suggest the email was ever written; please help I really need this functionality.

Can you send any emails at all indicating that the mail app is working? Did you try any basic stuff yet?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Close those affected apps and restart the iPad. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Photos get auto-cropped and ken burns. stop it.

Trying to do a stop motion. don't need the photos to movie. Cant get imovie to stop auto cropping and ken burns-ing the photos on import from iphoto. Would be fine, but i can't bulk adjust them either, tired of going through frame by frame and putting it back to fit. help.

When you start a new project, or to change a project you are currently working on, go to FILE/PROJECT PROPERTIES, and you can change the default behaviour for initial photo placement from Ken Burns to either FIT or CROP. Crop will make the photo fit the frame exactly by cropping off the top abd bottom. FIT will make the entire photo fit by letterboxing.
If you make your photos have the same aspect ratio as your project (either 16:9 or 4:3), then FIT and CROP produce the same result, and nothing is lost from the photo.
The FILE/PROJECT PROPERTIES will only change photos that you add going forward.
To change a bunch of photos that are already there, change one photo using the Rotate, Crop, Ken Burns Tool. Then, with the photo still selected, EDIT/COPY.
Now, select all the photos you want to change by holding down the Command Key as you click, so you can select multiple photos.
Now, click EDIT/PASTE ADJUSTMENTS.../CROP ADJUSTMENTS.

Application Start & Stop

What could be the problems if we stop and start the essbase BSO application i.e., 6 time per day

But when stopped , there is no Data movements , all processes are stalled . But still we get data but may not be the exact and expected Data ?
Let me clarify. It's not that when the application is stopped, you don't have the expected data. That's not right.
It all depends on the process that has been setup
1. How frequently you update your application with the actual data?
2. Even when your application is stopped, when an activity is initiated it will automatically start the application if "Enable database to start" is enabled.
We have build a process using shell scripts & maxl scripts that will run for every 15 minutes. Below is what it will do
1. Check active sessions for all 15 - 20 applications
2. mark which applications doesn't have any active sessions and stop the applications
3. write which applications
Process takes < 1min and we never had any issues till now.
You may have to think about all the possible options / approaches and pros and cons before deciding of how to take it forward
Regards
Amarnath
ORACLE | Essbase

Drawing and some layout help for a simple control: thin lines and application start

I am trying to create a new, simple control. The control should act as a grouping marker much like that found in the Mathematica notebook interface. It is designed to sit to the right of a node and draw a simple bracket. The look of the bracket changes depending on whether the node is logically marked open or closed.
After looking at some blogs and searching, I tried setting the snapToPixels to true in the container holding the marker control as well as the strokewidth but I am still finding that the bracket line is too thick. I am trying to draw a thin line. Also, I am unable to get the layout to work when the test application is first opened. One of the outer brackets is cut-off. I hardcoded some numbers into the skin just to get something to work.
Is there a better way to implement this control?
How can I get the fine line drawn as well as the layout correct at application start?
package org.notebook;
import javafx.beans.property.BooleanProperty;
import javafx.beans.property.IntegerProperty;
import javafx.beans.property.SimpleBooleanProperty;
import javafx.beans.property.SimpleIntegerProperty;
import javafx.scene.control.Control;
* Provide a simple and thin bracket that changes
* it appearance based on whether its closed or open.
public class GroupingMarker extends Control {
private final static String DEFAULT_STYLE_CLASS = "grouping-marker";
private BooleanProperty open;
private IntegerProperty depth;
public BooleanProperty openProperty() { return open; }
public IntegerProperty depthProperty() { return depth; }
public GroupingMarker(boolean open) {
this();
setOpen(open);
public GroupingMarker() {
open = new SimpleBooleanProperty(true);
depth = new SimpleIntegerProperty(0);
getStyleClass().add(DEFAULT_STYLE_CLASS);
// TODO: Change to use CSS directly
setSkin(new GroupingMarkerSkin(this));
public boolean isOpen() {
return open.get();
public void setOpen(boolean flag) {
open.set(flag);
public int getDepth() {
return depth.get();
public void setDepth(int depth) {
this.depth.set(depth);
package org.notebook;
import javafx.scene.Group;
import javafx.scene.paint.Color;
import javafx.scene.shape.FillRule;
import javafx.scene.shape.LineTo;
import javafx.scene.shape.MoveTo;
import javafx.scene.shape.Path;
import com.sun.javafx.scene.control.skin.SkinBase;
* The skin draws some simple lines on the right hand side of
* the control. The lines reflect whether the control is considered
* open or closed. Since there is no content, there is no
* content handling code needed.
public class GroupingMarkerSkin extends SkinBase<GroupingMarker, GroupingMarkerBehavior> {
GroupingMarker control;
Color lineColor;
double shelfLength;
double thickness;
private Group lines;
public GroupingMarkerSkin(GroupingMarker control) {
super(control, new GroupingMarkerBehavior(control));
this.control = control;
lineColor = Color.BLUE;
shelfLength = 5.0;
thickness = 1.0;
init();
* Attached listeners to the properties in the control.
protected void init() {
registerChangeListener(control.openProperty(), "OPEN");
registerChangeListener(control.depthProperty(), "DEPTH");
lines = new Group();
repaint();
@Override
protected void handleControlPropertyChanged(String arg0) {
super.handleControlPropertyChanged(arg0);
    @Override public final GroupingMarker getSkinnable() {
        return control;
    @Override public final void dispose() {
    super.dispose();
        control = null;
    @Override
    protected double computePrefHeight(double arg0) {
    System.out.println("ph: " + arg0);
    return super.computePrefHeight(arg0);
    @Override
    protected double computePrefWidth(double arg0) {
    System.out.println("pw: " + arg0);
    return super.computePrefWidth(40.0);
     * Call this if a property changes that affects the visible
     * control.
    public void repaint() {
    requestLayout();
    @Override
    protected void layoutChildren() {
    if(control.getScene() != null) {
    drawLines();
    getChildren().setAll(lines);
    super.layoutChildren();
    protected void drawLines() {
    lines.getChildren().clear();
    System.out.println("bounds local: " + control.getBoundsInLocal());
    System.out.println("bounds parent: " + control.getBoundsInParent());
    System.out.println("bounds layout: " + control.getLayoutBounds());
    System.out.println("pref wxh: " + control.getPrefWidth() + "x" + control.getPrefHeight());
    double width = Math.max(0, 20.0 - 2 * 2.0);
    double height = control.getPrefHeight() - 4.0;
    height = Math.max(0, control.getBoundsInLocal().getHeight()-4.0);
    System.out.println("w: " + width + ", h: " + height);
    double margin = 4.0;
    final Path VERTICAL = new Path();
    VERTICAL.setFillRule(FillRule.EVEN_ODD);
    VERTICAL.getElements().add(new MoveTo(margin, margin)); // start
    VERTICAL.getElements().add(new LineTo(margin + shelfLength, margin)); // top horz line
    VERTICAL.getElements().add(new LineTo(margin + shelfLength, height - margin)); // vert line
    if(control.isOpen()) {
    VERTICAL.getElements().add(new LineTo(margin, height - margin)); // bottom horz line
    } else {
    VERTICAL.getElements().add(new LineTo(margin, height-margin-4.0));
    //VERTICAL.getElements().add(new ClosePath());
    VERTICAL.setStrokeWidth(thickness);
    VERTICAL.setStroke(lineColor);
    lines.getChildren().addAll(VERTICAL);
    lines.setCache(true);
package org.notebook;
import com.sun.javafx.scene.control.behavior.BehaviorBase;
public class GroupingMarkerBehavior extends BehaviorBase<GroupingMarker> {
public GroupingMarkerBehavior(final GroupingMarker control) {
super(control);
package org.notebook;
import javafx.application.Application;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.TextArea;
import javafx.scene.layout.BorderPane;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class TestGroupingMarker extends Application {
public static void main(String args[]) {
launch(TestGroupingMarker.class, args);
@Override
public void start(Stage stage) throws Exception {
VBox vbox = new VBox();
BorderPane p = new BorderPane();
VBox first = new VBox();
first.getChildren().add(makeEntry("In[1]=", "my label", 200.0, true));
first.getChildren().add(makeEntry("Out[1]=", "the output!", 200.0, true));
p.setCenter(first);
p.setRight(new GroupingMarker(true));
vbox.getChildren().add(p);
vbox.getChildren().add(makeEntry("In[2]=", "my label 2", 100.0, false));
Scene scene = new Scene(vbox,500,700);
scene.getStylesheets().add(TestGroupingMarker.class.getResource("main.css").toExternalForm());
stage.setScene(scene);
stage.setTitle("GroupingMarker test");
stage.show();
protected Node makeEntry(String io, String text, double height, boolean open) {
BorderPane pane2 = new BorderPane();
pane2.setSnapToPixel(true);
Label label2 = new Label(io);
label2.getStyleClass().add("io-label");
pane2.setLeft(label2);
TextArea area2 = new TextArea(text);
area2.getStyleClass().add("io-content");
area2.setPrefHeight(height);
pane2.setCenter(area2);
GroupingMarker marker2 = new GroupingMarker();
marker2.setOpen(open);
pane2.setRight(marker2);
return pane2;

The test interfaces are already defined for you - the 3rd party session bean remote/local interfaces.
It is pretty trivial to create implementations of those interfaces to return the test data from your XML files.
There are a number of ways to handle the switching, if you have used the service locator pattern, then I would personally slot the logic in to the service locator, to either look up the 3rd party bean or return a POJO test implementation of the interface according to configuration.
Without the service locator, you are forced to do a little more work, you will have to implement your own test session beans to the same interfaces as the 3rd party session beans.
You can then either deploy them instead of the 3rd party beans or you can deploy both the test and the 3rd party beans under different JNDI names,and use ejb-ref tags and allow you to switch between test and real versions by changing the ejb-link value.
Hope this helps.
Bob B.

One step idvd was was connecting with camera and it has stopped connecting

i had camera Canon Elura 100 connected to firewire to computer. I was using one step IDVD and it was working. Starting using I movie on another camera
downloading from a camera card. Went back hook up firewire to Cannon camera and it will not read the camera now. I have reboot, replugged in and still will not work any suggestions?

Hi
May be help here
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

24pA - Captured timecode and DV Start/Stop

Hello - I've got what I hope will be an easy one - though I haven't found the answers lurking around here. I'm capturing footage shot on my DVX-100A in 24p Advanced mode. I'm capturing it from my DSR-11 deck using the Advanced Pulldown Removal in FCP 5.0.3 on my Dual 1G G4 tower running OS 10.4.3. My tapes should all be Non-Dropframe I believe.
I'm having an issue with DV Start/Stop Detect. It's putting markers where there is no start/stop between clips, and NOT finding any of the start/stop locations on the tape at all. This led me to examine my timecode more closely. I found that clips have timecode that increments like this (in the frames category):
01, 02, 04, 05, 06, 07, 09, 10, 11, 12, 14, 15, 16, 17, 19, 20, 21, 22, 24, 25, 26, 27, 29, 00
It plays fine in sequences set to 23.98, and even displays fine on an NTSC television I've hooked up to my DSR-11. This from the clip itself in the viewer, or from the canvas in the sequence.
Should my timecode be incrementing that way so that it can re-reference the 29.97 timecode on my original tapes, or do I have a problem? Does anybody know why my Start/Stop Detect feature won't work? Incidentally, it works just fine for 24p normal footage captured at 29.97.
Thanks for your help.
Zac

Zebulun -
I did what you suggested. I was able to capture a few clips just fine at 29.97. I also was able to use the dv start/stop detect feature with success.
However, using the "remove advanced pulldown" from the tools menu yielded the same odd results. It appeared to work just fine, and the info window for the clip says that the frame rate is 23.98 (with lower field dominance), but my time code still reads as it did from the above posting. Up to 29 frames, skipping frames to make it count only 24 times.
It still seems to play fine. Any thoughts on why my timecode is doing this?

2 Issues with Curve -- Camera and Application Connectivity

I'm having 2 issues with my Curve 8300. I tried upgrading the SW to 4.5 but it didn't help. Any ideas?
- The camera is no longer working. When I try taking pictures, it saves a JPG file but the file to the assigned folder but the file is smaller than it should be (usually ~6KB) and it doesn't render as an image.
- I'm trying to use an application (the NYT Crossword Puzzle) but it gives me the error message "Unable to connect to the server. Please try again later.", even though I do have connectivity for e-mail and web browsing. I tried adjusting the application permissions in advanced settings but it didn't help.
Thanks.

Hi and welcome to the forums!
As far as the camera I would try the following:
No data will be lost when doing the following: pull the battery while the device is ON. Replace after a minute, Let the device reboot 1-3 min, see if the problem is fixed, Thanks
If that doesn't work I would suspect a low memory condition please read this link:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB14213&sliceId=SAL_Pub...
I do not have a definitive answer for the cross word. app. Could it be possible to test it off hours, to see if the servers at the NYT are in
fact busy?
Thanks
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Message Edited by Bifocals on 11-07-2008 06:47 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

My 5 s camera and flashlight have stopped working

My camera app and flashlight quit working. I've rebooted, reset, and everything else recommended and now it just crashes.

Hi there Laura1221,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W.

My iPhone 5s's camera and flashlight suddenly stopped working.How can i fix this?

I've tried resetting the phone, its settings, turning off the phone, the voiceover thing, and nothing works at all.

Hello there, wicky1096.
The following Knowledge Base article offers up some practical troubleshooting steps to try when an application is not working as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
If the issue persists, you may then want to do the following:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Sony minidv cameras and intel macbook stop talking after firmware update

i think there must be an issue with a driver conflict between sony's camcorders and the latest intel firmware update. three sony mini dv cameras fail to be recognized by final cut pro or imovie. i have no such issue with canon minidv cameras. any info on where to get an updated driver? sony doesn't seem to support anything other than microsoft systems. thanks in advance.

Try resetting the PRAM:
http://docs.info.apple.com/article.html?artnum=2238
Oh and tell Sony the next time they tell you they don't support Mac that the following is true:
1. Their president came to Macworld 2004 to introduce new products for the Mac and a collaboration with Apple. I was there and saw it.
2. Their music is being sold by the iTunes Music Store
3. They have Apple to thank for iLink, as iLink is actually Firewire.
Suggest to them to reconsider their position. As Mac users won't support them if they won't support Mac users.

I use to be able to autofocus my camera and it just stopped working help please

MMy phone won't autofocus anymore it says something like ac/af lock help please

I suspect an Apple server problem. Many users have been reporting problems with Messages and Facetime today.

Make Arch auto-detect Network Start/Stop

I boot my PC while the network(Internet) is booting, so today I booted into Arch & then tried to start the network but Arch didn't detected it. I had to restart the PC in order to make the network accessible. How can I make Arch to auto-detect the network start/stop?

Cool G5 wrote:I had to restart the PC in order to make the network accessible.
Actually you didn't - you just had to restart the network init script.
Cool G5 wrote:How can I make Arch to auto-detect the network start/stop?
ifplugd I think - haven't used it myself though.

N72 Auto Cam and applications Start/Stop Problme

Similar Messages

Maybe you are looking for