N72 connection problem via bluetooth to PC

hi,
I tried to connect N72 to PC via BlueSoleil bluetooth. I used the latest version of Nokia PC suite. My mob get connected first and got disconnected within a min. While investing the problem the bluesoiel software is trying to enable serial port service and notify "Please Wait". It tooks lot of time. Please give me a suggestion to rectify this problem. Thanks in advance.

Did you get any driver for your BT hardware ?
If answer is yes, did you install it?
and who has made that driver (and what version it is)?
Anyway, I think that Nokia is not support installed BT driver for your BT hardware. Here you can see the list of supported drivers:
/discussions/board/message?board.id=connectivity&message.id=114
Have you tried to use microsoft BT stack?
(if you want to try it, uninstall your current BT stack and restart PC. If microsoft support your BT hardware, it should automatic install driver for it.)

Similar Messages

C6-00 Internet connectivity problem via bluetooth

I just bought the Nokia C6-00 two month ago and now have problem to connect my laptop to the internet via bluetooth with Nokia C6. The OVI PC suite works fine as i can syncro contact,notes and etc via bluetooth except internet. The internet config setting in ovi suite follows as the service provider configuration. Before my laptop can connect to the internet successfully but now i can't connect with the internet setting before. Please help me to solve this problem.

on my computer if there is no internet i know that the LAN card is toast
is there any chance the problem to be hardware not software or settings?

J2me Connection problem via Bluetooth

hello everybody,
iam not sure if this is the right forum but i am not sure where to post so pls forgive me in advance =)
Iam working on a midlet which is using the bluetooth OBEX -Connection to gain access to my pc but iam somehow not able to set a successful connection
RemoteDevice div = (RemoteDevice)deviceVector.elementAt(index);
url = "btgoep://" + div.getBluetoothAddress() + ":4";
try {
streamCon = (StreamConnection) javax.microedition.io.Connector.open(url);
}I receive the following exeception:
javax.microedition.io.ConnectionNotFoundException
the connect string looks like this: "btgoep://001060ab7283:4"

Did you get any driver for your BT hardware ?
If answer is yes, did you install it?
and who has made that driver (and what version it is)?
Anyway, I think that Nokia is not support installed BT driver for your BT hardware. Here you can see the list of supported drivers:
/discussions/board/message?board.id=connectivity&message.id=114
Have you tried to use microsoft BT stack?
(if you want to try it, uninstall your current BT stack and restart PC. If microsoft support your BT hardware, it should automatic install driver for it.)

HT4970 I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful

I bought a printer Polaroid POGO, MINI PRINTER. I can not connect it via Bluetooth with my iPhone 4. Is there an app to solve this problem, because I'm Judicial Medical Expert, and I need this tool for quick things. grateful
Max Cavichini
Medical Legal Expert
Problem ipad and i phone

This has never been a feature of iphone,ipod touch or ipad.

I have a MBP retina and I am having problem when my bluetooth and wifi are both active. My wifi is totally unusable when I am connected to via bluetooth speaker.

I have a MBP retina and I am having problem when my bluetooth and wifi are both active. My wifi is totally unusable when I am connected to via bluetooth speaker.

Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

NokiaPCSuite not connect 6230i via bluetooth while...

my nokia 62301i is getting connected from my PC via bluetooth and other devices but PC Suite is unable to find Nokia 6230i to connect via bluetooth!
Must be a PC Suit Failure!
Needs help!
Thanks.

I have the same issue.
I'm trying to use PC suite (downloaded from nokia site as the proper one for 6230i rel 7) connecting 6230i via bluetooth. Pc and phone are "associated" but when i launch the PC suite I get an error message: "It is not possible to recognize the phone".
I read a lot of post but nobody seems to have solved the issue!
From Bluetooth application I can read files on pc ... so che bluetooth connection seems to work properly; it appears as a PC suite bug .. really boring!
Nokia team can help us ?

Looking for a bluetooth headphone for my Macbook Air and Ipad Mini, I am not looking for a headphone that needs a transmitter to be connected to the source rather a headphone that can be connected directly via bluetooth to the source device

I am desperately looking for a bluetooth headphone that would be compatible to my Macbook air and Ipad mini both. I am more of looking for a headphone that does not need a transmitter device to be connected to the source (in this case Macbook Air and Ipad Mini) and headphone acting as a receiver, rather need a headphone that would be connected directly via bluetooth to the source, it would be great if multiple apple devices be connected simultaneously. Please suggest some good headphones.

Hey sorry for the late reply, I was busy to figure out alternatives as harman kardon was a difficult affair to find and acquire, but the good news is I managed to get hold of alternative.
Sony I assume recently launched a Bluetooth headphone DR-BTN200 which is compatible to my MacBook Air , iPad mini and android phone galaxy s2 with ease, the sound quality is pretty good as compared to other brands of Bluetooth headphones I checked compatible or incompatible to apple devices alike, this is definitely what I was looking for, costed me 7990 INR, this is highly recommended for ppl who are confused, I carried my devices to the store and checked before I bought a pair and pretty much happy,
The best part of this is its battery backup, I have used this hours for 3-5 days but this has not drain even then, but I do keep this charging once in 2-3 days just to keep this ready otherwise it does not even ask for it neither the quality of sound drops after 2-3 days of use.
This is over the ear headphone which is very soft but it's get sweaty around the ear I guess that's bound to happen.
Do get back to me for any other details, would be glad to share with all :)

AT300-100 - Connection problems with bluetooth mouse

I am having problems connecting a bluetooth mouse to my toshiba AT300-100 tablet.
The tablet and the mouse are able to successfully pair with each other. The tablet asks for the password, I enter 0000 and the two devices successfully pair up with each other.
I then ensure that the mouse is selected as an input device (click on the mouse settings icon in the Bluetooth screen). I receive no errors at any point. However, there is no mouse pointer on the screen, the mouse buttons have no effect, and the scroll wheel has no effect.
I have Googled and searched this forum, I can not find a reference to this problem elsewhere. Please advise. It appears to be an O/S bug as far as I can tell.
Looking on youtube I see the Asus tablet works fine with a mouse and I am following the exact same procedure. I have used the mouse on my Toshiba tecra with no problems at all, so I know the mouse is working just fine.
Has anyone else had this problem and is there a solution?
Thank you.
Mark

Hi
Did you solve this issue?
Are you abele to use the BT mouse connected to AT300?
In the description of AT300 its mentioned that you can use Virtual Mouse connected via BlueTooth or USB port.
Check the settings in Language & Input Android area.
There should be a point called Keyboard & Input Mouse
If you have more than one installed input device, tap Configure input methods to open the screen where you can configure each input method.

Connecting keyboard via bluetooth to Panasonic Viera or Apple TV

My apple keyboard is discoverable when viewing settings on my apple PC however when I try to connect by keyboard via Bluetooth to my Panasonice Viera TV or Apple TV under settings>bluetooth, the keyboard name never appears and the bluetooth search mode keeps searching not recognizing the keyboard. Solution or steps to resolve issue known? Please help

johannes_ts
Thank you, thank you. It makes no sense, the extra "hidden" step, but IT WORKS!!
johannes_ts wrote:
It was a long time since you wrote this post... anyhow, for the Googlers, I'll tell how I got my Bluetooth mouse (not Apple one) to connect in Windows 7.
For me when I chose "add device" and then selected the mouse it just endlessly tried to connect but never succeeded. But, when I once again opened that "add device" window, I now right-clicked on the mouse that was discovered, and in its properties I checked the box for mouse service and then pressed the OK button... then it installed the BT mouse drivers and suddenly it was working to use the mouse!
so hard to understand you have to do THAT? one would think it would work by just trying to connect the device that is a mouse...

Strange contacts problem via Bluetooth

Hello,
I have my Q10 connected via Bluetooth with my car (Mercedes Benz). All my contacts appear in its phone menu (surname, firstname). I have a contact with a Android mobile, lets call him John Smith. This contact has last weekend BB Messenger installed (for me), and gave himself in BBM a invented name, lets say John Superman.
But now, I cant see him anymore via Bluetooth in the phonebook of my car with his name stored on my Q10, but I see him under "Superman, John". Why? If many contacts are do so, my phonebook is getting confused...

Hi and welcome to the forums!
Click on the link below. Be sure to take a full backup of your device anytime you clear or delete
records en masse.
Thanks,
Bifocals
Clear the address book database on the BlackBerry smartphone
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problems connecting RAZR via Bluetooth

Hey guys...
I have an iBook G4 1.33MHz running 10.4.7 but, for some reason, my RAZR will not pair with my iBook. It just will flat out not discover it.
I go to my phone, click on discoverable, and let that run. Meahwhile, I run the wizzard to connect and no matter if I choose mobile phone or any bluetooth device, my iBook fails to find my phone, even though it's 10 inches away.
Any help would be appreciated.

Welcome,
I've done this so be patient; wait until you've actually hit the search function in the bluetooth setup utility. Then hit discover me on the phone [it probably won't work the 1st time]. Then hit search again and the phone [if necessary]. Just keep trying in this order first the Mac, then the phone, and you should get it, it is a little more difficult than other bluetooth devices.

Connect problems via SQLPLUS and other tools

I have installed an Oracle 10g Express database on my computer. I'm able to start the database as well as listener, and also login to the database. However, while trying to connect via SQLPLUS or PL/SQL developer, I get the following error message: ORA-12154 TNS: could not resolve the connect identifier specified. I also did a tnsping, but got the following error message: TNS-03505 failed to resolve name. I suspect that these 2 messages are somehow related to the problem. I set the following msdos variables: ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server. ORACLE_SID=XE. I also specified this in my registry. Also TNS_ADMIN is set to the following TNS_ADMIN=C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN. On my computer I installed the XE client. I noticed that there are several tnsnames.ora and sqlnet.ora registered in several places.
I also have the Developer Suite installed on my computer but cannot access it. I think this is due to the aforementioned problem.
I would greatly appriciate advise in resolving this problem.

You have several Oracle Home's, so you may be trying to get the tnsnames.ora file from another location. You could either declare the XE entry at all used tnsnames.ora files or you should be consistent with the sqlplus client you are invoking. After the PATH environment variable you may be invoking a sqlplus executable located elsewhere but the XE Oracle Home, so this sqlplus will try to resolve the tns alias at the Home where this was invoked from.
I suggest you to verify your environment variables and make sure your path environment points to the XE oracle home and either reset your environment variables for your current session or invoke sqlplus with absolute path.
~ Madrid

Time capsule - internet connection problem via wireless

Hi all - I've browsed around many other similar threads about people having difficulties with their Time Capsules, and although some of the problems I'm experiencing are similar, there's a few interesting oddities that other questions don't address or solve.
I have a 1TB Time Capsule that's acting as a router for my network. It's connected via the WAN port to a Netgear DG632 modem/router (in modem mode) that is set up with a static IP address and the DNS server for my ISP. The TC is also set up with these same static IP/DNS details, and is set to share the one public IP address.
The TC serves up DHCP addresses to the LAN devices via a mixture of ethernet (to a G4 Mac mini and to a Linux-based MythTV machine) and wireless (to a couple of 802.11g Airport expresses, a C2D Macbook using OSX Leopard and Windows XP, an iPhone and a Wii).
Everything on the LAN is happy, gets a unique IP address, can see the other devices, and can see the USB hard drives that are connected to the TC.
The weird behaviour comes when things try to actually connect to the internet.
Anything that connects via ethernet to the TC works perfectly. Connecting wirelessly however doesn't work properly - but not in a simple binary working/not-working manner...
If I connect wirelessly, I can do any of the usual network diagnostic things - e.g. Ping, Traceroute, etc. and data gets through and back, using IP address or actual site names.
I can download mail (via the standard Mail application, v3.5, from Gmail using IMAP)
I can even load secure webpages (i.e. those that use https, such as https://mail.google.com)
What I CANNOT do however is load any "normal" webpages (e.g. http://mail.google.com)
When loading a webpage, there is a brief period of data transfer (e.g. Camino reports "looking up ...", "connecting to ...", "waiting for ...") and then it just stops, and eventually the browser times out.
Other problems that people have reported have been solved by changing the DNS servers used - either to specify their ISP ones directly, or to use something like OpenDNS. My problem doesn't seem to be related to the DNS servers - to my mind, this sounds like some kind of outgoing port-blocking, but there ain't no such beastie on the TC as far as I'm aware, and since it is only happening on any device that connects wirelessly I'm pretty confident that I can rule out any local settings on a particular machine, or any settings on the modem.
I've tried several things to try and fix this, as follows:
Reset TC and modem
Factory-reset TC and set up again
Downgrade TC to 7.3.1 and set up again
Re-upgrade TC to 7.3.2 and set up again
Remove all wireless security (usually use WPA/WPA2 Personal)
Change wireless mode from 802.11n (802.11b/g compatible) to 802.11n only (2.4GHz)
Change wireless mode from 802.11n (802.11b/g compatible) to 802.11n only (5GHz)
Change wireless channel (Automatic, 6, 11)
Obviously none of that worked, so can anyone think of anything else that I can try and change to get this working?
For what it's worth, everything was happy until Thursday last week (11th Dec) and the only thing that I changed was an upgrade to Safari on the Mac mini, which seems extremely unlikely to have been responsible for causing such pain and anguish!
Thanks for bearing with me through all this - hopefully I've covered off all of the basics already, but I'm now not sure where that leaves me...
Cheers!

Something somehow fixed the problem a couple of days after my post - although I didn't know what triggered it (like I don't know what triggered the failure). I changed my set-up so that the Time Capsule was just a wireless bridge, and used the DG632 as the router and DHCP server - and obviously something worked OK.
Unfortunately the same problem happened again the day before yesterday, and after roping in the help of my ISP I determined that there wasn't a problem with the connection outside my LAN, so it was obviously something weird with my set-up.
After much frustration, rebooting, resetting, and fiddling, I spotted that occasionally a small burst of data would be received - perhaps enough to load an icon or small image - before everything froze up. On a hunch, I started playing with the MTU - and glory be! After the MTU is reduced from the default/automatic 1500 to 1458 everything works perfectly... except the Time Capsule no longer shows up!!! ARGH!!
I don't even recall ever seeing an MTU setting on the Time Capsule, and there definitely isn't one on the DG632 (don't most recent devices not require MTU tweaks? They just pass on the whole packet as-is?) so I've got no idea how to get around this issue now.
So much for stuff just working

Web service connection problem via web service data control (SOAP/REST)

Hi
I developed a simple "hello word" web service that I deployed on Integrated WLS.
Web service works fine - I tested it from SoapUI.
I created another application to call "hello word" using "web service data control (SOAP/REST)" in JDeveloper.
When I test it via "Oracle ADF Model Tester" application works as I'm expecting, but when I create JSPX page,
drag and drop webservice method as ADF parameter form and run it receive notification (screenshot):
"WSM-07620 : Agent cannot enforce policies due to either failure in retrieving polices or error in validations, detail= "WSM-02557 The documents required to configure the Oracle Web Services Manager runtime have not been retrieved from the Policy Manager application (wsm-pm), possibly because the application is not running or has not been deployed in the environment. The query "&(@appliesTo~="WS-CONNECTION()")(policysets:global/%)" is queued for later retrieval. "."
What I'm doing wrong?
Why I'm able to access web service from any other application but not from jdeveloper?
Regards

Hi,
I am not sure which JDev you are using, but looks like you have some policies setup for WSDC using GPA (global policy attachment) and your policy manager(wsm-pm) is not running. Can you check if the wsm-pm application is properly deployed in your Integrated WLS. You can see this from the list of deployed apps in WLS console.
-Vishal

Database Connection Problem via a Windows Form

I am having a problem getting a database connection using a windows form. The strange thing is I can use the same connection string in the sister web application and the database connection works perfectly fine.
I am using:
.NET 1.1
ODP.NET 9.2.0.700
Oracle 9i PatchSet 11
Here is an example of the connection string:
_oraConnStringMain = "Data Source=mydb;User Id=myid;Password=mypass"
The error is: "ORA-12154: TNS:could not resolve service name" and remember the same connection string and implementation is the web application works fine.
Offending code:
          public bool ValidateOracleConnection(string connectionString)
               bool _success = false;
               OracleConnection oraConn = new OracleConnection(connectionString);
               try
                    oraConn.Open();
                    _success = true;
               catch (Exception ex)
                    MessageBox.Show(ex.Message.ToString(), "MYAPP", MessageBoxButtons.OK,
                         MessageBoxIcon.Information);
                    _success = false;
               return _success;
Any ideas?

Hi Steven,
My only WAG is that a different sqlnet.ora or tnsnames.ora might be used for the two different apps. Search your machine for both files. Are they only in the OH\network\admin directory?
You may want to run a client side sqlnet trace of both apps, and compare them. It should tell you what tnsnames.ora file it's using, and may give a clue as to why the difference.
Hope that helps,
Greg

N72 connection problem via bluetooth to PC

Similar Messages

Maybe you are looking for