N73 - Another Problem after upgrade the firmware t...

Except the slow contact search problem (solved by Unplug the battery), I still suffered from some application install problems.
1. Whenever I restart the phone, a message 'Installing' always poped up, and the phone not responding for around 2-3 minutes. And then an error message 'Unable to complete ....' prompted.
2. The K-Mobile Client application losted after upgrade, and I tried to reinstall it , but resulted error by 'File corrupted'

Usually that annoying installation process in the beginning can be removed by deleting that installation file in MMC>\Private\10202dce . Most of them does not have the real title of the application. To delete the right one, you need to go to the application manager first and look at the title of the application that cannot be installed nor removed. Ones you know the titles, plug in ur phone to ur computer and browse MMC>\Private\10202dce , some title of the applications from the application manager should be listed there. Delete whatever you find is listed "not installed" in application manager (app cannot be installed or removed), but first make sure to make a backup of it somehow just in case you make an error. After you delete the file/files restart ur phone. The annoying installation process should not appear anymore. Note that by just removing that file may not fully remove the files it created. For advice, if you install applications in ur phone make sure you have backup of them stored in ur computer so that if the installed applications in ur phone stops working properly all you need to do is to reinstall using the original/backup sis files.
- Is this a Signature? -

Similar Messages

  • Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

    Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password. 
    Any DEFAULT Password so that i can unlock the settings menu.

    That's quite odd, just repeat the update process
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Too many errors after upgrading the firmware to 1.0.3.10 on Cisco RV180W wireless router

    My company purchased one Cisco RV180W wireless router few days ago and it worked normal with default firmware version of 1.0.0.30. Today I upgraded the firmware to version 1.0.3.10, the users can still access this router via wired and wireless devices, but on the dashboard I observed two major problems, one is the CPU utilization always shows 100%, another is the more and more errors appearing, on the Syslog Summary panel "Error" log has been up to 625 and is still increasing, there is one message repeatedly displaying in the log, see in below:
    Wed Nov 13 13:55:25 2013(GMT+0800) [rv180w][System][PLATFORM] /pfrm2.0/bin/bwLimitConfig /tmp/system.db 18 dot11STA 100 failed. status=-1
    Who can tell me what does this error message mean and how to elinate this error message ?  also how to deal with 100% CPU utilization ?
    Thanks.

    Hello,
    i have been looking at different VPN routers over the last few weeks and i was very close to buying the RV180W, but then i stumbled across many posts reffering to firmware issues, one issue is that the cpu sits at 100% useage, i just wondered if this is a bug in GUI or is the CPU actually max'd out? has anyone had any resolution into this?
    also the firmware on the emulator is a newer version than is listed on the support page, does anyone know when 1.0.3.14 will be released for download?
    when i buy a new product i like to ensure that the system is fully upto date before its put into use but i obviously dont want to add any performance issues from the ofset due to the CPU useage.
    i also have a could of questions if anyone can help
    the Ipsec VPN, will this work with the Built-in VPN client for apple devices? (New IOS7), i am unable to find a quickvpn application for apple IOS.
    is the site-to-site IPSec VPN also compatible with the Cisco Wvrs4400n router?
    thanks in advance.

  • After upgrade the firmware, it can't be initialize

    Hi,
    I use PCI-7344 and UMI-7764
    and upgrade the motion software and firmware to 7.2 version
    but I can't be initialize the motion card in MAX
    the error code is -70038
    由 ycw7 在 03-25-200601:53 PM 上編輯的訊息
    ====================
    ●LV Version：LabVIEW7.1
    ●OS：WindowsXP(SP1)
    ●Hardware：PCI-7344, PCI-6602, PCMCIA 6024E
    Attachments:
    error.jpg ‏122 KB

    Hey ycw7,
    After getting this error, I would recommend that you take the board out of the PC, uninstall the NI-Motion driver software, and make sure that any motion configuration files or any files regarding motion get deleted. Then do a reinstall of the NI-Motion 7.2, place the board back in the computer after the installation is complete, and this time try the board in a different slot, and see if you can initialize the board. If this doesn't work, then if you have another PC that you can install Motion 7.2 on, try it in another machine and see if you get the same error. If you still get this error, then you might want to try reverting back to an earlier version of NI-Motion, like 7.0, and see if you can get that to let you initialize the board. Finally, if none of these work, then you should contact National Instruments and work with them about what to do next. Let me know if you have any questions. Thanks, and have a great day. 
    Regards,
    DJ L.

  • Font problems after upgrading the OS today

    I upgraded this morning to 10.6.3. After upgrading:
    In Keynote and in Pages several fonts (10 or more) like Cochin, Optima, etc. are not useable any more. If I open a document all characters of a text written in these fonts have changed and compressed in one place in the textboxes. Keyboard layout of the keys is also destroyed. If I change the font to one which is ok , the text is ok too. Disabling the font or changing the fonts in question is the only way to go now.
    The preview of the first page of a document in finder for those fonts is still correct. Also the display of the font in the font-program is correct. If I cut and paste text to a different program, the text will be display correctly for the fonts in question.
    This seemed an internal problem of iWorks. Help wanted.
    regards
    esser

    Welcome to the discussions, f.esser.
    There are two things I'd try, first, to see how large the problem is, create a new user on your computer and see if there's a problem with those same fonts under that user. If not, that indicates that something under your main user has been installed that affects that usage. If you still see problems under the second user, then it's a deeper OS problem.
    Second, reinstall iWork from the disk. If it's a minor problem with iWork and the new OS, performing that, then updating to the latest iWork should fix it.

  • Printer problem after upgrading the Mac HD disk

    After replacing the Mac HD on my Mac Pro, and copying all the "old" data from the "old" Mac HD using Migration Assistance, I cannot print. Getting "communication error". Re-installing drivers does not help. The printer is a Canon MF4350d connected over USB. Is there files somewhere (USB drivers?) that may affect this issue. Or can how can I delete all (Canon) printer drivers and make a clean install?

    First, make a backup of all your data or you entire system. Then you will follow the instructions in the link below to erase the Yosemite volume and reinstall Yosemite from scratch. After assuring it is working properly you can restore your third-party software from original media. Be sure the software is compatible with Yosemite. Finally, restore your data from your backup.
    Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Problem after update the firmware

    I have Imac isight 20inch. After the imac update the new firmware, the apple screen is black. Althought, I can hear the sound of fan working, the white ligh, but nothing is on screen. Anybody know about that problem? Any solution will be appreciate!

    To Apple Discussions!
    Which "model" & "generation" G5 iMac do you have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you
    Have you tried any of the recommendations already mentioned in this thread?
    =============
    Never post your email address in a public forum. Spam bots roam public forums looking for "spam victims".
    If you insist on using your email address in a public forum & you want to "trick" the spam bots, then suggest that instead of using "@ "in the email address, use instead the actual word AT.
    Regarding responding to your emal addy, we ask that you post all questions to the appropriate discussion forum. This allows other users and other helpers to have a chance to view and respond to your post. That way, everyone benefits from the exchange.
    Thank you

  • Problems after upgrading the Adobe Acrobat Reader

    Hi All!!
    I have created a Web Dynpro Abap which displays an Adobe Interactive Form.
    Initially, my version of Adobe Acrobat Reader was 6.0, and runs perfectly.
    Today, I have upgraded my version to the 8.1, and the form is displayed but with all the fields blank. I have debugged and the information is sent to the Form.
    One of my partners has still the version 6.0 and runs perfectly, and another partner has the version 8.1, and has the same problem like me.
    Somebody knows what is the cause of this?
    Thanks and regards,
    Manuel Míguez.

    Hi Satya!
    On the fist part of your post, I can´t see any data, but I can see the label of the fields.
    On the second part:
    1. The form is DDIC based.
    2. I think is WAS 7.0 SP 12.
    3. Yes, is from the backend. I send the data by means of the node context automatically generated on the Web Dynpro ABAP when I indicate the form to the UI element Interactive Form.
    4. Is a print form.
    I hope I have been clear enough.
    Thanks and regards,
    Manuel.

  • Another problem after upgrading to v6.0.2

    I upgraded to v6.0.2 today and now iTunes won't play anything in my Library.
    I get an error - 'iTunes has encountered a problem and must close. We are sorry for the inconvenience'
    Anyone else had this? Anyone got a fix?
    I'm running XP on a PC andhave had no previous problems.
    TIA
    Steve

    Well, that's a new one I've never heard of before!
    Have you tried different files?
    If you just click on one of those music files in Windows Explorer, can you get iTunes to play it?

  • Serious problems after upgrade to firmware 5.1

    Hi, I have uploaded firmware 5.1. to my iPhone 4 and ever since the phone crashes frequently and goes into "repairmode".....I only get to restart it pressing Home and "On" Button for longer....I tried setting it up as new iPhone but problem continues...anybody any idea? Best iFitch55

    You're welcome.
    An iOS update cannot cause a hardware failure. It can bring an underlying and unknown problem to the surface but not cause it.
    If this were possible and the update caused this for many iPhone 4 users, the habitual whiners would be here in droves. If someone else did experience the same, this would change or do what for you?

  • Problem after upgrade the Dreamweaver to version 8.02.

    As you know Dreamweaver can generate a code for User Login,
    but I found that the code for the two versions are difference.
    8.01 is like that:
    $LoginRS__query=sprintf("SELECT SF_id, Loginid, Loginpwd,
    Role, CN_id FROM tbl_staff WHERE Loginid='%s' AND Loginpwd='%s'",
    get_magic_quotes_gpc() ? $loginUsername :
    addslashes($loginUsername), get_magic_quotes_gpc() ? $password :
    addslashes($password));
    8.02 is like that:
    $LoginRS__query=sprintf("SELECT SF_id, Loginid FROM tbl_staff
    WHERE SF_id=%s AND Loginid=%s",
    GetSQLValueString($loginUsername, "int"),
    GetSQLValueString($password, "text"));
    Both codes are okay, but there is a serious bug about 8.02,
    because if I make any change for the code about the part of User
    Login (even I press <Enter> key), it will show double
    “Login User” in Server Behavior and show the warming
    message about it cannot analyze “Login User” and
    “Login User”.
    I attach two code, the different between them is I add one
    line below the "$_SESSION['MM_UserGroup'] = $loginStrGroup;", but
    even I make the minor change, it will get the problem
    Please help me to fix the bug.

    Maybe part of this might help...
    Please forgive this sideways reply, but it might be useful to point out that Apple has said that very soon they will make available the new operation system, Mavericks, that has some remarkable battery saving aspects.
    Just a thought...maybe waiting would be a better alternative?
    Hugh

  • Another problem after upgrading to 7.01 in XP Coverflow grrrr.

    Coverflow started to work in itunes 7 after about a week, not perfectly but usable.
    I just dowloaded & installed the update & coverflow does not work in version 7.01 instead I'm greeted with the message: itunes is unable to browse covers on this computer.
    Prior to the update I had begun to tag the album artist category looking forward to the feel of this additional jukebox feature. Apple please don't let me down...make Coverflow a feature enabled for us XP users!
    Windows XP
      Windows XP  

    By updating my video card drivers coverflow is up and looking beautiful.

  • Serious Problem After Upgrading Firmware

    After upgrading the firmware to my Airport Express, Airport Admin Utility doesn't recognize the base. The AE seems dead, the reset daes'nt work, but the lights still flash. Does anyone could help me?
    PS: I'm sorry for my english!

    When you say base, is the Airport Express your base or do you have another base station. If you have another base station, once you factory reset the Express, it no longer recognizes your wifi system. If your Express is your base and the only router in the system. Unplug it, take a paper clip or ball point pen. Push in the on the reset button, continue to hold the reset button in while plugging in the Express into your power outlet. Hold the button while the amber light flashes several times and then becomes solid. Then you can release the reset button and wait for the Airport to reinitialize. Then run your utility again scanning for the base which will show up identified by its factory ID, not what you named it before. When you bring it back into your system whether as a base station or extending the range of your computer name it a different name than you did before and use a different password.

  • USB Share broken after upgrade to Firmware 1.05.36

    Hi, Problem after upgrade to Firmware 1.05.36.  When connecting USB disk there no share created for the newly connected disk. The result is: Broken functionality backup to USB diskBroken functionality restore from USB disk It worked OK before thefirmware upgrade (I have been using this a lot). I have checked through ssh login: the disk mounts ok. Please fix!!

    Yes, that's exactly what I mean - the shares that are automatically created when you insert the drive (ie the functionality you seem to have lost). There's no setting to enable/disable that, at least that I know of. It should just always automatically do it. The shares themselves are just links in the /shares folder, to the relevant mount folder if what I can see on my MCM via SSH is what I think it is. You may be able to manually make the links yourself via the command prompt as a work-around. Please note that I haven't tried this myself, as my one works. But what I would do is try and install the firmware image again over the top of your current one. You can download it manually from this page and then install it via the dashboard using Settings > Firmware Update > Manual Update. There should be a button there that you press and point it to the firmware image file you downloaded and stored on your local machine. If the button isn't there, try a different browser (I find on my Windows machine it doesn't appear under Chrome, I have to use IE for that job).

  • Choppy video streaming after upgrading E4200 firmware to ver. 1.0.03

    Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?

    You mentioned in your post that you upgraded the latest firmware. So after upgrading the firmware did you reset the router? It is recommended to reset the router after firmware upgrade.  Steps to reset the router:
    Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
    After the process reconfigure the router as per the ISP setup.. Then try to do the following steps:
    A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
              1] Open the software and go to the option which says "Router Settings"
              2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
             3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
             4] Then go to the Wireless tab, keep network mode as mixed,
     For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
     For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
    B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

Maybe you are looking for