N73 Automatic Profile Changing Problem

Recently , my N73 is automatically changing back to offline mode when I am trying to switch to other modes such as General. It is also showing me that "SIM card Registration Failed " when I inserted my old SIM or new SIM.
My phone history went like this. I bought it while I was studying in Thailand and I had used the phone for last one and half year. The phone was able to use with any SIMs from any major network from Thailand. So, I think it is an unlocked version. Recently , I have moved to Singapore and I could not use it with any SIM from Singapore. The worst thing is : the old SIM from Thailand was supposed to work in Roaming mood in Singapore and Malaysia. When I visited Malaysia , it worked well in Roaming state. I have no idea why it is constantly changing back Offline mode no matter how I have tried.
I need geeks like you guys to save me from this misery !!!!! Plzzz.

Back up your phone and do a reset.1st try 12345.If that does not work try *#7370#.
If my post has helped you please click the white star on the right

Similar Messages

How to address the IP address automatically changing problem?

My Oracle database 10g(10.2.0) is on the WinXP platform and the system IP address often changes automatically. This leads to some troubles with my Oracle database. How to deal with this problem? How to stop the IP changing problem?

frank.qian wrote:
But my database is using an ipaddress now. When I use loalhost instead, can database accept this?The database doesn't know or care. Its all in your network configuration files ... listener.ora and tnsnames.ora, and your 'hosts' file.
Edited by: EdStevens on Dec 1, 2008 8:47 PM

HR PA and Planning (PD profile) changes not updating auth profiles of users

PROBLEM:
We are on ERP version 6 since 2008. We started experiencing this problem December last year and now it is all over our system. As soon as employees are transferred or new appointments are made in HR on PA or if the PD profile is changed in planning the changes cannot be seen by the user in their auth profile. The user can literally not see the newly appointed employee on the org structure or even newly created org units and positions are not visible. When RE_RHAUTH00 is run on the user name the update indicates that the changes (new employee and new org unit) is linked.
The following updates run every night: RHPROFL0_DAILY_UPDATE and RHUATUPD_NEW. I have also run PFUD during the day to make sure all updates go through. We have also "played" with some profiles with PD profile changes but it is as if the profile remains completely static. We have looked for personnel lists and deleted them to no avail. Our Basis administrator has cleared the buffer for us and has run report RSUSR405 that did not do anything. We have searched through notes on Support packages and have just loaded and tested support pack 46 to 53. The only work around seems to be to delete the user and create a new user and then it seems to easily accept new changes.

Hi,
Yes, please make it scheduled background job. This is normal procedure.
Define periodicity on your business needs: some run it every night, some every hour.
Cheers

Automatically write changes to XMP crashes Lightroom!

Everytime I turn on the option "automatically write changes to XMP" my processor load rises to 100%. So far so understandable. LR is trying to update all of my 40000 images with xmp data. We've already discussed that there is no progress-bar indicating this and that this can be a real issue for people who don't know.
So I turn on the checkbox in the evening and let my pc write all xmps over night, but unfortunately every morning I look at it, lightroom has closed or crashed. It seems not to be possible to complete this task anyway.
Unfortunately writing to XMP seems to have another issue: LR does not notice, witch xmp have already been written, so it writes everything again and again, when I start it manually.
Could anyone of the LR-Team issue a statement and explain how this is meant to work and why LR constantly crashes on automatical export?
Thank you in advance.

I feel that though LR is a very good product in many aspects, they have seriously failed in other aspects. I think what is mentioned here is one of the worse problems. How should we trust Adobe to take care of our image library when they behaves like this? They must surely know that their product will be used by proffesionals that have thousands if files in their library.
I think it is very arrogant of them to update all my photos with XMP-information even though I didn't ask for it. I check the "automatically write CHANGES to XMP", actually believing that this is what LR is going to do, but instead it updates all my photos with some useless information that are of course already in the files. This is NOT a good thing to do. I will not trust Adobe after this, because I have no way of knowing what they will do to my library.
So, now, after installing LR, my partial backup suddenly discovered 50GB of pictures that was modified and needed backup! F... them!
HEcK

Colour Profile change after Exporting a version

Hi
Has any one had this problem - and found a solution?
My Aperture Preferences are set to - Adobe RGB 1998.
Now,
1     -     if I select an image in Aperture then select EDIT WITH ADOBE PHOTOSHOP
                 the image is opened in p/s
                    when I view the image in Bridge
                         the colour profile is correct - Adobe RGB 1998
Problem:
2     -     if I select an image, then EXPORT A VERSION (to my desk top)
                    the colour profile changes to sRGB   ?
                    Don't understand why this is happening - anybody know why?
                         Thanks
                              Tony (from London)

The color profile is part of the export preset as Keith pointed out
Make sure the preset you are using has the color profile you want.
regards

"Automatically Write Changes Into XMP" Not Working for DNG Files

Hello,
I am needing to update DNG/JPG file pairs with keywords that I add in lightroom. The following is the problem that I am encountering.
When the image consists of only a JPEG file (ie. I had my DSLR only snap a jpeg and not an associated DNG), and I add one or more keywords to the file in Lightroom, these are written / saved immediately in Lightroom and are visible immediately in the 'tags' column for that image in windows explorer. Very useful and important functionality for my workflow.
However, when the image consists of both a JPEG and a sister DNG (i.e.,snapped simultaneously by my DSLR), and I try to add keywords to these (treated at this point as a single image by lightroom) then Lightroom does not record the keywords into either of the two files and consequently no tags are visible in windows explorer. I have confirmed this apparent problem with a seperate image metadata utility software, and am hoping that it's just something simple that I am missing.
Also "Automatically Write Changes Into XMP" is selected and I have also tried manually both: "right click," "metadata," "write metadata to file;" and "right click" "update DNG preview and metadata" and the problem persists.
Hopefully someone has encountered something similar and can point me in the right direction.
Thanks in advance.

@Eric: hitting cntrl+s works but can be tedeous on large galleries. I've been doing this but it can be a pain.
@Jeannine: different topic than this thread but to answer anyways... Lightroom automatically saves all changes into your catalogue. You never need to dave your changes (here's the kicker though) as long as you do not move the original file. If you
move the file than lightroom won't know that it's the same image as the one you've edited. Once you are done editing your image you will need to "export" the image to a new file (you don't wan to overwrite the original). If you don't export than only lightroom will have your edits. Lightroom is "non-destructive" Which means that it doesn't touch your original photo. Lightroom keeps a text file containing the instructions on what you did to make the edited version. Since your changes are just text inatryxtions you have to "export" the image to get your final image in a version you can put online, print, etc. But to answer your original question, I think you prob moves the original image. If not, could you give us more info?

Macbook pro retina color profile changes when switching from integrated to discrete

Late 2013 macbook pro retina color profile changes when auto switching from integrated to discrete graphics card. Problem started after updating to 10.9.3

Same here. Really annoying because I have my screen calibrated for photo editing, which makes it much warmer than the default color profile. A lot of websites cause the graphics cards to switch for a couple of seconds, which causes the profiles to switched back and forth a few times, everytime. Really annoying, and dissapointing to see, considering Apple released like a hundred .3 betas.
You can use gfxCardStatus to make it stay on one graphics card over the other... Just remember to change it back when you're using a program that actually needs the descrete card.

AIF automatic profile and extlinux?

I wanted to ask if the new change of selecting between grub and extlinux in AIF will also influence the automatic profile?
I haven't tested one of the tests builds yet, as I have no need for a reinstall currently, but I just wanted to know out of sheer curiousness, so that I know it the next time I need to reinstall, as I always use the automatic AIF profile...
To reiterate my question, then i'm reffering to that several AIF system files have been changed, including the interactive profile, but I couldn't see any changes being made to either the automatic profile or it's example scripts, which currently is setup for grub only...
Thanks in advance!

...Polite bump in the hope that dieter will notice it, as i'm not feeling confident about bothering him privatelly...
Btw, i'm just asking if there are any plans for adding extlinux support to the automatic profile(and update the example scripts), or if there isn't?
I'm not complaining at all, and don't mind grub legacy whatsoever, but just simply curious?
Thanks in advance,
Martin.

Automatic slide change

How do I set a presentation for automatic slide change? I want it to change from slide 1 to slide 2 after 92 seconds. The Keynote Help says nothing directly about this when I query for "automatic slide change", but it does address "transition initiate automatically". In my mind, this is the same thing. After all, if you initiate a transition, you are initiating a change to the next slide, right? It says:
"Choose an option from the Start Transition pop-up menu.
On Click: Initiates the transition when you click to advance to the next slide.
Automatically: Initiates the transition after the amount of time specified in the Delay field."
Seems perfectly clear to me. I want the transition to initiate automatically, not on click. That's what I choose and I enter 92.0s. I assume that means the same as one minute 32 seconds. The transition doesn't happen. I know the Keynote Help often isn't easy to understand, but this is so simple and clear (once I got over the odd wording about "initiate"), yet it doesn't work. Why not?

Good luck getting any more help with that attitude.
You posted a problem that I was unable to reproduce when doing things properly, so all I did was try and offer some advice on the most common reasons why you wouldn't be getting the expected results. The other poster in this thread did the same.
What do we get back? Some silly playground-level chest beating about how you've been using the app since beta. That time obviously hasn't helped your problem-solving skills. Or your manners.
One less person in this forum I'll bother spending any time trying to help...

Automatic Time Change

Hi there,
winter time is back in Europe... however, my iPhone 3G iOS4, although setting "automatic time change" is on, did not change to winter time. As soon as I switch off "automatic time change" it shows the correct (changed) winter time. What might the problem be?
Thanks
Christian

Thanks, but when inserting the SIM into another cell phone it works 100 %. Putting it into a second iPhone and it does not work. So seems to be an iPhone issue. Even after restaring any of my iPhones it takes the old time.

How to automate the changing of Width and Height of the document

Hi,
I just want to know if anyone already automate the changing of width and height of document(eps file).
Thanks,
Buddy

Check out SetDocumentSetup from kAIDocumentSuite.

Automatic ORDCHG Change Purchase Order after Order response from Vednor

Hi
How to trigger Change Purchase Order action after receiving PO Confirmation - Order Response from Vendor.
The scenario is that Order Confirmation vednors sends contains delivery date or delivery qunatity variance within defined tolerances. In such cases it is acceptable to allow automatic PO change.
This is an EDI scenario. Idocs ORDRSP and ORDCHG in use.
Thanks for hints.
Mariusz

- For automatic document adjustment, you must make the necessary settings in Customizing (SPRO ->Materials Management->Purchasing->Conditions->Automatic Document Adjustment). The system logs all the relevant purchasing documents and can therefore determine all the documents affected by a change to a condition.
- This is only possible for purchasing documents for which follow-on documents (goods receipt, invoice receipt) do not exist.
- Before you run this report, you must have run report RMEBEIN4 (creation of worklist for automatic document adjustment).

How to track mrp profile change

Hi,
Is there any possibilities to track who has done the MRP profile change.In mm02 its not in editable mode.when i check in MM04 for the particular material its showing lot many changes.so i couldnt figure out who has done. i want who has done the changes in the particular field mrp type ?

Hi ,
Goto MM02 -Enter Material -Environment - Display Changes - Here ,You will get list of changes in transaction with time , user id .
Now if you select the check box and hit magnifying glass symbol , it will take you to the changes done by certain user .
For MRP profile :
In the Material Master menu, choose Profile ® MRP profile ® Usage.
The selection screen appears.
Enter the name of the profile. You can also enter a plant and MRP controller to restrict the selection. Then choose Execute.
A list is displayed of the material master records in which the MRP profile is used. You now have the following options:
You can display or change the MRP profile by choosing Display profile or Change profile respectively.
You can display or change a particular material master record in which the MRP profile is used by choosing Display material or Change material respectively. In the material master for industry, the MRP view on the material master record appears, from which you can access the other views. In the article master for retail, the Display or Change Article: Initial Screen appears.
Try and revert
Regards
JH

How a new output message will be created automatically after changing a PO?

Dear friends,
How to generate a new output message automatically after changing a PO and saving it?
Thx & Regds
Amitava

Hi,
System only takes automatically the Output message in PO in creation mode in ME21N ( Only if you have maintained the condition record MN04)
If you have not maintained Condition record in creation of PO also you need to maintain manually.
But once you changed the PO system will not automatically pick up the new Output message, you have to manuallly input the Output messages in change mode of PO - ME22N.
You can also use ME9F for this.
rgds
gsc

Simulating DNG Profile changes in PSD file

Hello everyone,
I have a RAW file and applied Adobe's default DNG Profile (via the Camera Calibration panel in Lightroom 2.6) and converted it to a PSD file so I can retouch the photo via Photoshop CS3.
After hours of retouching, I now want to apply a custom DNG Profile that I made from a Color Checker. However, I'm not able to apply the profile to "already-rendered images" (http://labs.adobe.com/wiki/index.php/DNG_Profiles:FAQ#WhyOnlyEmbedded)
So my question is: Is there any way to simulate the effects of a profile change via Photoshop adjustments (i.e. HUE/SAT adjustments)?
Please feel free to let me know if more clarification is needed.
Thanks,
David

I thought I'd posted a reply but I failed to make it stick, somehow. Anyway, thanks Jim for that. Makes perfect sense.
Except I've just had a further thought. Why would Adobe change a file name to distinguish between color spaces if DNGs/RAWs are color-space agnostic? Where it would make sense is with jpegs, but name-changing doesn't happen there, of course, as there's no conversion taking place.

N73 Automatic Profile Changing Problem

Similar Messages

Maybe you are looking for