N73 Error Messaging: Unknown File Format (-12003)

Hi,
Could someone please tell me what is the below error message for in N73 Phone?
Messaging: Unknown File Format (-12003)
I received a bluetooth attachment of a ".avi" extension. When i try to open that message in my inbox, it gives me the above error. I have a software "SmartMovie" which can play ".avi" files installed on my phone. So i don't understand why this error ?
Is it possible to configure the file types like avi to an application in N73 ?
Please let me know..

SHort answer is you can't.
If you can save the file to the phone you can download the dvx player from http://mobile.divx.com and then open the AVI file with the DiVX player. But you can't add AVI as a recognized file type (at least I haven't found a way).
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

IWeb 08 error message "The file format is invalid"

I have been reading all of the problems regarding publishing iweb pages at the moment, I too cannot publish my site but I get a different error message
"The file format is invalid"
Can anyone help as to why I might be getting this message?
My iDisk seems to have a very old version of my website stored and I don't know where to look to find the current versions files?
Why hasn't iDisk got the most up to date version of my iWeb site and how do I get it to have?
Which folder on the iDisk should your iWeb files be stored in?
Sorry to ask so many questions but I am new to the publishing part after spending weeks building a site only to find it I get an error and my iDisk file structure holds old files.

When I opened iWeb I could see the most up-to-date version of my site, I could edit it and save it (to where I don't know). When I opened the web and sites folder on my iDisk it contained only the files from a previous version of my website created months ago.
I tried looking for the Domain file for my iWeb site and looked in my home folder, application support and then iWeb but the iWeb file in App support was empty.
I believe the iWeb file in App support is where the Domain file should be located, correct?
I have used Time machine to go back a week and have located the domain file and have restored it. The domain file now sits in the iWeb folder in App support in my Home, where it should be.
Now when I load iWeb I see the version of my website that was created a week ago which is fine but iDisk still has the old file structure of my site from months ago.
Can I delete the old file structure completely from the Sites folder on my iDisk? this should remove the old version of my website shouldn't it?
How do I get the restored version of my website to appear in iDisk?
Do I simply copy the Domain file into the sites folder on iDisk?
My iWeb files on Mobile me are also the months old versions, how do I update these so my new site is all that I can see?
Any answers to my 'File format' problem when trying to upload, is it because I don't have my iWeb files in the correct places?

Error message: Unknown File

Hi there! I tried to import some mp4 files into Final Cut Pro 7 the other day and it came up with an error message saying the files were unknown. I looked at the codecs of each file and they were identical to mp4 files that had imported. I even tried imported them individually - too no luck. I use a 2008 MacBook Pro with Version 10.6.8 and have never had this problem with FCP7 before.
Help?

mp4 is not a native file type FCP can use correctly, having a GOP structure, it is a delivery file type, based on H264 codec, its not an editing type, your lucky to have imported mp4 without freezing FCP in the past.
you need to convert mp4 files using Compressor into a file type FCP can work with nativly and you wont have any more issues; DV, DVC Pro, Apple Prores .....
Ensure that the audio is converted to 48K, which will iliminate the audio problems
As an alternative, for rough and ready editing, use QuickTime Pro which can play and edit mp4, it wont be frame accurate though.

Unknown file formats

I'm a silver haired N70 owner trying to keep the grey matter active! I get a lot out of my N70 (I think) but one problem always bugs me. If I try to open a file in FExplorer I often get the message "Unknown File Format". Why?

In your phone (in the Symbian operating system), a file type "handler" is registered as a special type of a program called a "recognizer", which knows what to do with a particular file.
If there is no recognizer for the file, then you get that error.
In other words, FExplorer asks the operating system to launch whatever program knows about this file, and the operating system is saying: "I don't have any registered programs that knows how to handle this type of files, so I don't know what to do with it".
Now, of course, the operating system is saying this through the error message "Unknown File Format", but what it means is what I wrote above.
Of course, it doesn't mean that there are no programs that know what the file is for. Just that there is no system-level recognizer for it. The program that "owns" the file can still know what it is for, and do whatever it does with it.
There is also a chance that the file was, for example, downloaded from a PC, the Internet or wherever, and it contains something no program on the phone knows what to do with (e.g., some unknown video file format, or whatever).

"UNKNOWN FILE FORMAT" on N70

Hi friends
I've downloaded few games with with following file formats on my N70: JAR, RAR and JAD. When i try to open or install them I get an error message "Unknown File Format". What can do to resolve this or is there a software that i must install so it can read those files.
Please help

you can use:
1.Handy Zip
2.Zipman with .rar plugin
3.Xplore File Browser
etc..etc..
google each one of them to download.But,if you arn't getting them i'll provide you the links.
Was this post of some help? Click 'Kudos' star on the right hand side of this post. Your gesture will be highly appreciated!

Unknown File Format Error while Uploading file through SFP in Note Implemen

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing the manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

Unknown File Format Error while Uploading file through SFP

Hello All,
I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
While doing manual steps given in the attachment; I am getting following error.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Manual step listed in the attachment is given below:
Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
b) Unzip the .zip file
c) Execute transaction code 'SFP'.
d) Enter 'Form' as 'HR_INTAXF162006'.
e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
file system.
g) Save the form and activate the same.
Please help/suggest.
Thanks in advance.
Arti Dobariya

Hi,
ADS has to be configured to perform those manual steps.
Please check the note 1580196 GTS: Error occurred when uploading file
(unknown file format).
The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
Since ADS was not configured in our system; we end up using the option of running form 16 in SAP Script.
Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
Regards,
Arti

Error occurred when uploading file (unknown file format) in t.code SFP

Hi,
According to SAP Note 1465628 - ESI Limit increased and length of temp. ESI no increased, when we are doing Step 4. PDF form changes (valid for ECC 6.0 and above)....and point (i)...in transaction SFP (From - HR_IN_ESI_005_99), system shows the below message.
Error occurred when uploading file (unknown file format)
Message no. FPUIFB068
Plz guide..

Hi Anil,
Refer following links :
Re: Adobe Form assignment
Adobe Uploading form error unknown file forma
Hope this will help.
Regards,
Vivek

When opening a msword file wit .doc extension i get an error message: import error. The file format is not valid

when opening a msword file with .doc extension i get an error message: import error. The file format is not valid

Looks like. I tried in the TextEdit format tab to set all the combinations while opening the file, like plain text, rtf and html without success. Always I get the same signs.

Unknown file format error in studio mx

Help! I am using Flash in the Studio Mx Professional suite
and I cant open a .fla file. It tells me that its in an 'unknown
file format'.
But the file does open when I used my school's Flash 8
program. Please tell me they didnt design the Series 8 programs so
they werent backwards compatible with the Mx series!!! Im so
agitated right now...sorry. So if there is a hotfix or any easy
solution that wont make me scream, please post!

PyaNo;
You seem to be describing "forwards compatibility" rather
than
backwards--not many applications do that... Flashmx (version
6) cannot open
fla files saved from flash 8.
Fwiw flash can "downsave" fla files one version back--flash8
> flashmx
2004 (7), flashmx2004 > flashmx. -Tom Unger

Unknown file format when downloading map loader?!?...

I downloaded nokia maps from the nokia website and then nokia map loader but for some reason a get a message on my n73 saying that the nokia map loader is an unknown file format...can anybody tell me what to do??

I assume you're trying to install the map loader on your computer and not on your phone
If you can't get map loader to work, you could try this map loader alternative: http://nokiamaps.moo.no . You don't need to install anything for that.
symbian programs & themes, nokia maps for any browser on any operating system of your choice, and other tricks to tame symbian: http://symbian.site666.info

How do I convert an excel (2008) document to Numbers? When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid"

How can I convert an Excel (2008) document to Numbers. When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid.

That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
I see two possibilities for Numbers inability to open it and the message you receive:
1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
2. The file is an Excel file, but has somehow been corrupted.
Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
Regards,
Barry

I get an error message "unknown publisher" when I download quicktime 7.7 for windows 64bit

I am trying to download quicktime and I get an error message :unknown publisher". I am using windows 7 64-bit operating system. Can anyone help me?

Which I get. But clicking on that link you provided does not give you the option of choosing between 32 and 64 bit installers.
Yeah, that was certainly a 32-bit installer file being referred to in the other message, too. (The 64-bit installer file is called iTunes64Setup.exe.)
Just in case it's an issue with your normal browser not working properly with the system-detection equipment on the page (there's a javascript control that checks for operating system specifics, and is supposed to deliver the correct Mac or Windows installers), let's try a different web browser for the download. If you use Firefox instead of IE (or vice versa), do you get offered an iTunes64Setup.exe instead of an iTunesSetup.exe?

Printing from Preview produces error message "The file couldn't be opened".

Hi,
Ever since the upgrade to OS X 10.8, I get the error message "The file couldn't be opened" each time I want to print from Preview. I just have to click "OK" and then everything prints fine, but if anyone knows how to get rid of this message, it would be even better!
I have run "Verify disk permissions" without success.
The system is on an SSD volume whereas my home volume is on an internal HD. But other users with (smaller) accounts residing on the system volume have the same problem.
Each time I open the print dialog, the following message appears in the logs:
com.apple.Preview.TrustedBookmarksService[2159]: Failure to de-serialize bookmark data file.
I removed files related to Preview in ~/Library/Preferences/
There is no *.plist file in ~/Library/Application Support/Preview
Thanks!

Pages 5.2 Mac OSX 10.9.2
Start Pages app
Create a blank document
File > Save or <Command>+S
Select Mac Device and find your user folder or favorite, Desktop (not iCloud)
Error: the file "Untitled.pages" couldn't be opened!?!
Repeat giving the document a different name and it works
Since when do we write error messages with "n't"?
Usually a well written error message offers a suggestion as to what you might do about it?
Since it says opened and I clicked on Save, there is a bug in there somewhere.
All I was trying to do today was copy and paste some text from a website into numbers spreadsheet
Both Edit > Paste options but the text in one cell so I tried to save it as a text file first to try and import the data
Text Edit does not have a text only export format so before loading Terminal and starting vi or emacs, I tried pages. I'll go try XCode's editor or my Windows 7 vm with notepad and openoffice
I miss the old Pages with the Appleworks importer, this one needs more Quality Assurance Testing IMHO
WWSJD "What Would Steve Jobs do?"

I get error message "unknown error" When trying to log on to itunes via pc, help please!

I get error message "unknown error" When trying to log on to itunes via pc, help please!

Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

N73 Error Messaging: Unknown File Format (-12003)

Similar Messages

Maybe you are looking for