N73 Failed To Update Firmware Via PC

i've tried using pc to update my n73 firmware but it'll stop updating when it reach 53.3mb. i've been repeating to update dozens of times but it ended with the same problem. can't even find solutions in the internet. any ideas? thank in advance

at last, my n73 was succesfully updated after keep on trying for 8 hrs. thanks

Similar Messages

  • What is defference between updating Firmware via P...

    I'm N85 user and I want to know What is defference between updating Firmware via PC an Via Device manager on phone?

    Firmware updates are usually released via one method or the other, rarely via both.
    The NSU method downloads entire ROM images from Nokia's servers, resulting in downloads of more than 100MB in some cases.
    The FOTA method only downloads what has changed from the version running on your phone to the latest version available. This means much less data to download, usually around 4-6 megabytes, which is important if you don't have access to a wireless network and have to use your operator's packet data service.
    The FOTA method is safer (because it doesn't involve a computer running a notoriously flaky operating system) and faster (because there's less data to download).
    Otherwise, the end result is the same.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Problem for update firmware via FOTA (N79)

    hi friends
    i have N79, firmware v31.002 , i have come to know that new firmware v31.101 is out for nokia n79,
    i tried to update firmware via FOTA, it shows "server not responding", i thought server might be busy at that time,
    but i tried for two days it shows the same reply, i dont know whether my phone has any problem with that,
    pls help me
    thanks/regards

    v31.002 is the latest version available till now in India for N79, I just checked, so no hurry at all.
    regarding server not responding you may check options -> settings after *#0000# & it should have nokia as selected profile.

  • Failing to update firmware

    I own two Iomega ix2 NAS devices that were purchased together.  I have been attempting to update the firmware in both.  In one device, I have not had any problems. 
    The other device, which currently has firmware version 4.0.6.192194, I consistently get an "" error message whenever I try to install firmware version 4.1.106.31982.
    I feel confident that the firmware file is not corrupt since I was able to successfully install the same file on the second ix2 device.
    The S/N of the troublesome device is significantly different (part numbers are identical, however).  So I am suspicious that the device is not exactly what it claims to be.
    The S/N of the device failing to update is: LTA2310094
    The S/N of the device which updated successfully is: LTA3021430
    Thanks for any help you can provide.

    Hello dkobe
    There are varying causes for this issue.  I do recommend contacting Lenovo Support  for the issue when you are able to.
    I have some recommendations you can try though.
    1. If you have not already tried, please restart the unit via the web interface under system status or power the unit off/on using the power button on the rear of the unit. 
    2. This shouldn't be an issue, but some browsers can have conflicts with devices.  You may want to try a different browser to try uploading and applying the update.
    3. If the issue is due to a disk fault, swapping the internal disks to opposite bays while powered off might allow you to complete the firmware update after booting.
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Linksys srw2048 unable to update firmware via xmodem (using hyperterm)

    I have three srw2048 series switches at my new job. One updated fine via the web interface the other two (after I found a windows machine to use the web interface) looked as though they were uploading the new file but after a reboot I was still on the old verison. So I broke out the console cable. What I have done is to Download Software to the switch (option 1) this kicks me over into xmodem. Once I am in xmodem I choose to send a file (the latest rom) using the 1K Xmodem protocol it immediately gives me retries and errors until it reaches a threshold that ends the session. During this whole process zero k is transferred.
    Boot Version 1.0.0.04
    Software Version 1.0.0.49
    Hardware Version 00.03.10
    The only thing I can think is that I must need older files to upgrade to an intermediary version before loading the latest 1.22 rom file.

    You might want to pose this question in the Linksys forums at http://homecommunity.cisco.com/
    Also, try another terminal program like Teraterm Pro.  Maybe it needs "classic" xmodem?

  • E75 fails to upgrade firmware via USB

    Hi,
    My Ovi suit tells me that there is a firmware upgrade to my E75. From 202.12.01 to
    211.12.01.
    I have now tried at least 10 times to upgrade via USB cable but all of them fails before they even start to copy the firmware to the Phone.
    I have tried through OVSuite, PCSuit and also with Nokia SW updatear stand alone but all fails with slightly different error messages.
    Ovi suite 2.5.8se only tells me it fail because of a disconection withthe phone
    PC Suit tells me that I can't connect the phone through an USB hub (which I haven't ).
    The strange thing is that I can see that they are comminucation becasue both sw are able to identify my phone and also what FW I am using.
    What could be wong.
    All the SW is that latest versions and I have disabled firewals + antivirus.
    Also both my laptop and phone have fully charged batteries
    /MrG
    Solved!
    Go to Solution.

    What exact version do you have *now* installed on your E75?
    Do you know which product code you have?
    Have a look here:
    http://www.nokia.co.uk/support/product-support/device-software-update/can-i-update
    Please note that the product code written on the paper label may not necessarily be the product code of your telephone. If you bought it from Nokia it probably is the same. In my case, I bought it from an online store in Germany and the internal product code was not the same as the one on the label.. which is suspicious, but anyway.

  • Fails to update Firmware

    I have bought my Ipod recently (60 GB), the guy that brought to me, installed the ipod from a MAC. I have a PC with XP, so I have to reformat. The first time I did so, everything was fine until I tried to add music. It failed, when I tried to recover... I could make it work, so I decided to reformat again. The problem is that I have reinstalled the software many times, used the Updater 2006-01-10 and sometimes the ipod is not recognized, sometimes it says that software is not the proper one for the ipod.
    Hope to hear some good advice, as I need to solve this issue ASSAP, as i am travelling soon...

    In the meantime I managed upload from pc: When trying the ..10th time it worked. Now I wait, wether in the future automatic update will work. Is there a way to know this beforehand from e.g. the logs?

  • HP Laserjet P1102w !!Failed to update software!!

    Attempted multiple times to perform update on Laserjet P1102w.
    Received error dialog box:  "HP Laserjet P1102w !!Failed to update Firmware.  Power cycle and try again."
    I'm printing to the unit just fine.
    This question was solved.
    View Solution.

    Hi,
    Is the printer connected via USB or through the Wireless network?
    If you may use a wireless network connection be sure to temporarly plug a USB for the update as listed on the update instructions:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=bi-115794-2&cc=us&dlc=en&lc=en​...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Trying to update firmware on my canon printer MG5320 but in doesn't recognize the printer being plugged in via USB cable

    I am trying to update firmware on my canon printer MG5320 to be able to use the airprint feature but in doesn't recognize the printer being plugged in via USB cable. I have tried restarting the macbook, turning on and off the printer, repairing permissions, deleting and redownloading the update what else can I do? The prinyrt works fine otherwise...

    If there are no drivers for Yosemite you might be in trouble.. HP will tend not to support printers once they are EOL.
    Getting it running over wireless rather than USB might be worthwhile.
    Can’t connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
    Has the printer been working and now failed after update.. what update caused the failure if that is the problem??

  • My iPhone 4 fail to update to iOS 5 and now it can't restor the firmware I am geting and error it says The iPhone "iphone" could not be restored. An unknown error occurre (-1) . Plese help

    My iPhone 4 fail to update to iOS 5 and now it can't restor the firmware I am geting and error it says The iPhone "iphone" could not be restored. An unknown error occurre (-1) . Plese help

    My iPhone 3GS is getting the same error. I've called Apple a bunch of times, and they won't get back to me. I'm searching through discussions to figure out a solution.

  • LaserJet P1102w Firmware Failed to Update

    I have tried several times to update the firmware for my wireless printer. Each time I try, I get an error message stating that the Firmware Failed to Update. Power Cycle and Try Again.  Each time that I try, the USB cable is connected.  The firmware updates for the printer that is "connected" with a USB, but will not update for the "wireless" printer.

    Hi I have the same exact problem.  
    (´´I have tried several times to update the firmware for my wireless printer. Each time I try, I get an error message stating that the Firmware Failed to Update. Power Cycle and Try Again.  Each time that I try, the USB cable is connected.  The firmware updates for the printer that is "connected" with a USB, but will not update for the "wireless" printer.´´)
    I´m wondering why all of a sudden you chose to send private messages instead of public ones as well.  HP must not want this problem to be public huh? Any help is appreciated.  Thanks. 

  • Sony A7 failed to turn on after updating firmware 2.00

    As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

    I bought the Sony A7II a few days ago.  It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer.  Neither one would get the charge light to illuminate.  Not feeling the love Sony.  I just purchased a Flash, wrist belt, filters, etc...  I'm definitely not happy.  It seems this is a problem!

  • WRT610N FIRMWARE UPDATEING V1 to V2 FIX HOWTO NO MORE FAIL TO UPDATE

    I SPENT WAY TO MUCH TIME FIGHTING WITH MY ROUTER AND I FINALLY GOT THROUGH TO THE ONE PERSON THAT SPOKE ENGLISH AT CISCO SUPPORT. IT WAS A SIMPLE FIX AND HERE IT IS (but not before they told me that my router which was less then a year old was broken and I would have to buy a new one.) I can't believe no one else has posted this.
     In actuality it is a browser problem that causes the FAILED TO UPDATE screen usually at 20 - 30% and sometimes goes to 98% and never completes.  
    Do this to get it to go.
    1) Download the latest firmware and save it somewhere on your computer (I suggest desktop)
    1b) if you have the storage unit make sure you disconnect the USB drive before you do these following steps. 
    2) go to the downloads area and select support for the  WRK54G on the US SITE (yes I know that is the wrong router).
    3) goto downloads and select V1
    4) download the utility (http://downloads.linksysbycisco.com/downloads/firmware/1224638358976/WRK54G_V1.55.02_UpgradeUtility_fw.exe)
    5) run the program, enter  the IP of your router and  select the firmware
    6) let it run and update the bios - this should avoid any of the stupid browser error outs and you should be able to go on your merry way.
    I can't believe that I'm the only person that went through this problem. Having the irritating AWARD WINNING crap pumped in your ear while you wait for the almost useless help support just adds insult to industry. Who the hell would give them an award for hardly speaking english?
    Message Edited by OnnagokorO on 11-25-2009 09:16 PM

    Same problem. Have no idea what to do. i hoped this release would help all of my problems with this creapy router. love all my linksys routers but this one and its even the most expensive one!
     well i never get over 20% before i get the failed message :/
    oh and btw, tried your solution from both windows 7 and windows 2003 server (homeserver)
    but no good
    Message Edited by Wraithbone on 11-26-2009 09:23 AM

  • Regarding non updating of E62 firmware via NSU.

    As per nokia website,The E62 has the following firmware that can be installed to the phone.
    E62 RM-88 2006-09-11 2.0618.06.17 AMERICAS
    E62 RM-88 2006-10-23 2.0618.06.17 APAC
    E62 RM-88 2007-01-26 2.0618.06.17 APAC EMEA
    E62 RM-88 2007-04-19 2.0618.06.17 AMERICAS
    E62 RM-88 2007-05-21 2.0618.06.17 EMEA
    E62 RM-88 2007-07-16 3.0633.09.13 AMERICAS
    E62 RM-88 2007-07-17 3.0633.09.13 EMEA
    E62 RM-88 2008-01-29 3.0633.31.19 EMEA
    E62 RM-88 2008-06-27 2.0618.06.17 AMERICAS
    E62 RM-88 2008-08-11 3.0633.09.13 AMERICAS
    Any idea then why cant we update the firmware via the NSU for the E62, as the NSU does not accept to update the E62???

    there are phones listed that NSU supports if your phone is not listed there is no way you can update your phone's firmware/software unless you goto the nearest nokia care point
    i think 1200 is not supported...
    check it out here-> http://europe.nokia.com/A4176089

  • Tsclient drive redirection fails after wrt54g firmware update

    Recently updated firmware on WRT54g wireless router. Ever since am unable to redirect drives in rdp client session to 2003TS. The drives show up as "system folder" on the server, no drive letters visible, not accessible.
    This happens with all PC's on my home network. If I shut down my wireless router and poach a neighbors connection using my laptop the drive redirection works as before.
    Any ideas?

    Are you able to access the drive before upgrading the firmware ?
    If yes, reset the router as it is recommended by Linksys that you should reset and reconfigure the router after resetting .
    Press and hold the reset for 30 seconds .
    Power cycle the router and modem .
    Open the setup page of the router and configure it again .

Maybe you are looking for