N73 firmware update failure!

Hello,
I'm currently using firmware version 3.0704.1.0.1 and I'm like to update this firmware with the latest verison of firmware which is 4.x.xxx.x.x.x. I constantly get an error when I'm trying to install the latest version of firmware.
The message that I get is shown on this screenshot.
http://img6.imageshack.us/img6/1733/nokiadisconnectingpeopl.jpg
Keep in mind, that I have formated the Nokia N73 several times, but it simply doesn't work during the update. So I don't have any non-commercial software installed on it at all. Unless I got a virus or something.
Attachments:
nokia disconnecting people.jpg ‏27 KB

i'm defenitely sure it's not a virus on your phone.
try this;http://europe.nokia.com/support/download-software/device-software-update/faq#faq17
If you want to thank someone, just click on the blue star at the bottom of their post

Similar Messages

  • Does anyone know how to solve: "Firmware update failure. Disk write error"?

    Hi all,
    Here is the list of all what went wrong and where I am now:
    1. My Ipod worked well
    2. I wanted to update it, you know, the normal thing with Itunes
    3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
    4. I took my external drive (where my music is) at work and tried again: same result.
    5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
    6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
    7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
    8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
    9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
    I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
    Thank a lot for your answer

    Hi Cyrille,
    Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • "firmware update failure. disk write error."

    i get this when i use the ipod Updater after clicking "restore"... this thing is giving me a headache. Also get the previous mentioned "cannot read from or write to disk" error when using itunes after a couple downloads. i followed the steps in the link to those issues and ran some updates on my PC and still the same. HELP

    Have you read both
    For Firmware update failure. Disk write error please see
    http://docs.info.apple.com/article.html?artnum=301267
    http://docs.info.apple.com/article.html?artnum=300836

  • Firmware Update Failure? Extreme help needed

    I was trying to update my ipod but when i tried to restore it, it suddenly stopped, then it said firmware update failure. No my ipod is screwed up again. This is the second time. The first time i sent it away and they gave me a new one, i followed the directions they gave on updating and restoring to windows settings, but now my ipod shows the apple, then the exclamation mark folder with a website below that. i need help cuz i don't want to send it away again.

    ok i think i may have just fixed it, and for all of you who may run into this problem. I just tried restoring it on my friends computer, and i think i fixed the problem.

  • "Firmware Update Failure", please help

    Okay so my brand new 20GB iPod photo refuses to have the systems software loaded onto it, everytime I try and use the iPod Updater (yes I have the newest version) it says: "Firmware Update Failure. Disk write error." I've got it connected with USB 2.0, it shows up as a removable storage device in my computer but doesn't show up at all in iTunes.
    So if any of you know what's going on please give me a hand.

    JamesBond said:
    That means that USB2 port is not compatible with the iPod?
    I don't think so. More along the lines that the iPod is not USB 2.0 compliant, or properly certified, or it has a bug somewhere.
    Basicly if a device is USB 2.0 compliant, it will work with a USB 1.1 port, just very slowly.
    from www.usb.org, if a "device" has passed the certification and has earned the proper "High Speed USB" logo http://www.usb.org/developers/compliance/logo/usbhs125.gif it also HAS to work with a USB 1.0 port otherwise it won't earn the logo.
    Now, this begs the question... has the iPod passed it's tests and earned it's High Speed USB certification logo? I can't find any of Apples products that have the logo, can someone point me to them?
    Apple is a memeber of the USB Implementers Forum, Inc (and only has one person that is a member).
    You can find some good information about USB at www.usb.org. Specificly that it is no longer refered to as USB 2.0, but as "High Speed USB" (just semantics)

  • FOUND SOLUTION TO: "Firmware Update Failure.Diskwrite Error"

    I have found a solution to the:
    "FIRMWARE UPDATE FAILURE. DISKWRITE ERROR."
    Last night i re-encoded my mp3's to 128kbs, and then plugged my iPod Shuffle in, and it went crazy... i tried restoring and it kept giving me the error above!
    Anyways, here's a solution (that may require to be tried a couple of times)...
    If you keep getting this error, go to My Computer, then right click the iPod (maybe called "Removable Storage").
    Go to Format... and make sure its set at FAT32. Also make sure that "Quick Format" is unticked.
    Once this is done. Eject it. Plug it into another USB slot, and go to iPod Updater and restore. It should work.
    And then rename the ipod thru iTunes, and upload ur music on to it!
    Enjoy and Good luck!

    So are there any risks involved in formatting with windows?
    I just tried doing this and it won't format (I select the option but there is no response)

  • Getting "Firmware Update Failure" when restoring

    My ipod mini kept giving me the folder and exclamation point icon and resetting didn't work to make it stop. I tried a few times to restore, but it keeps giving me the message "Firmware Update Failure. Disk Write Error" whenever I try to restore. Now what do I do? My ipod still just gives me the folder icon.

    A couple of tricks to try:
    1) Plug in whatever was last connected (charger, peripheral) and then try rebooting. Sometimes it just wants to see the last config
    2) Try mounting on PC as USB drive (may take multiple tries). If successful, then REFORMAT just like an external HD.
    At that point, you can "start over" with iPod update.

  • N73 firmware updated to 4.0750.31.2.1

    i wanna to get that Update
    "n73 firmware updated to 4.0750.31.2.1"
    but i can't find it
    plz help me as fast as possible

    that update is avilable to product no. # 0543843
    put my mobile no. # is 0539295
    soo each time i try to update my phone the updater reply that 4.0736.3.2.1 is the last one
    Soooooooooo what i can do??

  • Restore fails with "Firmware update failure. Disk write Error" message

    I am going totally bonkers with this one. My Shuffle stopped working suddenly.
    My iTunes was not able to read the contents of the iPOD and there seems to be a corrupt filesystem. After reviewing various posts, I have tried the following with little success:
    1. Tried Restore using the Updater tool that came with the Shuffle (2005-09-23). I kept getting the "Firmware update failure. Disk write Error"
    2. Downloaded the new updater tool (2006-03-23) and tried restore again. I got the same error message again.
    3. Tried formatting using Windows format, it is not able to complete the format
    4. Tried chkdsk. Get an error message saying "CHKDSK is not available for RAW drives."
    5. Tried connecting it to a different computer and tried pretty much the same steps. Similar results.
    I am using USB 2.0 both on my current Thinkpad as well as the other computer I tried with.
    I am totally clueless and am not sure how to go about fixing this one. Though there have been lots of posts about this, I haven't been able to find a solution that works for me. Any thing else that I may have missed out which I can try?
    Thanks,
    Kris
    Thinkpad   Windows XP Pro  

    hiya!
    just checking. have you worked through the possibilities from this document yet?
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
    given that you're connecting to a laptop, we'd better check on this possibility too:
    iPod not recognized when connected to Windows laptop over USB
    ... and even though you aren't using a Toshiba, this technique might be worth a try (if all else fails):
    iPod not recognized correctly on Toshiba laptop
    love, b

  • N73 firmware update failed but still working?

    Few days ago I saw new firmware for N73 is out. Downloaded program, stared to update firmware.
    After cca. 90% of progress bar I heard same sound you hear every time you plug in/out your phone over USB cable. My heart almost stopped since I heard stories you must not unplug phone during firmware update, that it will not work after that. Suprisingly software offered me to repeat update process!
    I clicked OK and it started all over again.
    Once again after reaching about 90% progress bar instalation stopped with same un plugg sound. This time there was no repeat update offer. I tryed everything but update din't work.
    I plugged USB out of comp and phone and tryed to turn on phone. I wasn't able to turn in on! Then I took out battery, put it back in and turned on phone.
    All worked, menu was in english, but I had option to change it back to croatian again. Installed old programs and they all worked. Voice dialing working, camera working... all working.
    What the hell happened?
    Why installation stopped on 90% and my phone is working without problems on NEW firmware? Bug in Nokia Firmware update software?

    I've understood it's quite normal that the update prosedure may seem to stop even for some minutes and then go on again. The connection between the phone and computer will also break and then reconnect couple of times...
    Are you sure, you did wait long enough before unplugging your phone (at least some minutes)?
    But if your phone has the new firmware now and everything is working fine so I hope there is no problem!
    Nokia N97 v. 12.0.024

  • N73 Firmware Update & Restore of Phonebook/Message...

    Hey all,
    I recently updated my N73 Firmware to 3.0704.1.0.1. As you know when upgrading it wipes the phone. When I restarted I restored my last backup from Nokias PC Suite to get names/numbers/messages transfered over again to the phone. Unfortunatly in doing this it seems to have removed some of the new firmware features (clock with 'am/pm' screensaver etc.). Do any of you know how to get this back? I've had a look in settings but can't see anything.
    Thanks in advance,
    Chris

    I've understood it's quite normal that the update prosedure may seem to stop even for some minutes and then go on again. The connection between the phone and computer will also break and then reconnect couple of times...
    Are you sure, you did wait long enough before unplugging your phone (at least some minutes)?
    But if your phone has the new firmware now and everything is working fine so I hope there is no problem!
    Nokia N97 v. 12.0.024

  • When is N73 firmware update due

    I called Vodafone (UK) to ask what I can do with my 8 week old N73 that repeatedly dies on me - whilst idle, on a call, or writing a txt. They said they were aware of issues in the firmware but that they didnt know when these would be fixed. *#0000# = V 2.0628.0.0.1 10-07-2006 RM-133 Nokia M73 (39.01) Is there a planned release date for the update? How will it be available? Are there any automatic notification methods? Many thanks

    This is a user to user site appearantly... So no Nokia people here (atleast, don't count on it).
    There is a minor firmware update available (from .0.0.1 to .0.0.3) but I don't think that will solve your problems.
    Nobody knows when the next big firmware is, although we all think it's near. There is a AsianPacific (APAC) version of a 3.x.x.x. firmware but noone knows anything about it. We're all waiting for it
    Updating can be done at a Nokia Service Centre or, when the N73 is added, through the Nokia Software Updater which you can get on their site. This updater already lists a number of other models (N70, N80, N93 and more) but unfortunately no N73. The only way to know about a new firmware is checking the threads on this forum and others I'm afraid.
    Btw, you don't happen to have 3d ringtones on (and especially not in combination with 'say callers name' option) since those seem to cause MANY problems.
    I'm on the same firmware as you but no problems here, not those anyway. Hope to help

  • Hp Laserjet CP3525 Firmware update failure

    I was trying to update the firmware on an HP color Laserjet CP3525 using a USB  connection using the instructions that were posted on the HP website for the Firmware upgrade.  It looked like everything was going well, but when the printer rebooted it never gets past the 6/6 screen on the LED screen.  I have left the printer in this condtion for several hours and it never gets past this area. I'm assuming that the Firmware upgrade caused the printer to do a hard crash and is not recoverable, but I'm hoping that someone might be able to help get this back up and working.  Any assistance would be greatly appreciated.
    This question was solved.
    View Solution.

    Well, in general if the firmware update was interrupted for any reason it would lead to this. This could be caused on the computer side (restarting/logging out/ending the process before it is complete) or in the cord that you are connected with if it is damaged in any way or not properly secured in the USB ports.  I am sorry that you are in this situation, I understand that in a situation with limited spending caps you would have legitimate concerns about updating your other machines. 
    If you have any further questions or issues myself or one of my colleagues are on this forum almost 24/7. 
    I hope you have a wonderful rest of the week, Bob! 
    -Spencer 

  • Mifi4510L Firmware Update Failures

    I'm trying to update my MiFi unit and it repeatedly fails. It tells me this update is mandatory and the speed is like a 9600 baud modem. Is amyone else getting this error? Look at the weird date. See attachment.

    See the MiFi 4510L firmware update instructions:
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=53839
    2.28 is the most recent version.  There is a thread with lots of helpful information here:
    https://community.verizonwireless.com/thread/770671?tstart=0
    Try running through the suggestions in that thread and see if you can get the problem resolved.

  • Laserjet cp2025 firmware update failure

    My lasejet is USB connected and I've been trying to update the firmware to the latest version. I've done everything in the support area to get it to update but still no joy. The update runs and says it succesfully updated buy the smily face when it is done but the printer didn't do what HP says it was suppose to and verified by printing a config page. I've tried networking and still get the same results.
    Anyone have any idaes as to what might the problem , Me or the firmware update?

    Well, in general if the firmware update was interrupted for any reason it would lead to this. This could be caused on the computer side (restarting/logging out/ending the process before it is complete) or in the cord that you are connected with if it is damaged in any way or not properly secured in the USB ports.  I am sorry that you are in this situation, I understand that in a situation with limited spending caps you would have legitimate concerns about updating your other machines. 
    If you have any further questions or issues myself or one of my colleagues are on this forum almost 24/7. 
    I hope you have a wonderful rest of the week, Bob! 
    -Spencer 

Maybe you are looking for

  • Dell XPS-17

    I just need a yes or no answer (Or a detailed one as to why if you must).  Will these specs handle Adobe Premiere Pro CS5 & After Effects?  I'm sorry if this is a repetitive question. 2nd generation Intel® Core™ i7-2760QM processor 2.40 GHz with Turb

  • Applying different GPOs based on extensionattribute1

    Hello, I would like to make use of the extensionattribute fields for computer accounts in AD.  What I would like to do is apply a differnt GPO based on the contents of a particular field, for example, I would like to create three different GPOs with

  • Since upgrading to ios7 on my 4S, I can't watch .mov files in emails

    No luck playing other people's iPhone videos that are emailed to me, in my iPhone email. What gives? I have a 4S and just upgraded to ios7 DC

  • Can I turn off mail threads?

    When I get Pictures in a email I get duplicates because it is titled 33 (example) pictures for you and it pulls up every grouping of 33 (example) pictures from previous emails. It loads every grouping and is not necessary. can I turn this feature off

  • JDeveloper 9i integration with PVCS

    I have read that JDeveloper 9i does not integrate with PVCS, is this true? If not, is support planned? Thanks