N73 firmware update-to be or not to be

My N73 ME current device software version
is V 4.0736.3.2.1
in Nokia update site >>
When i enter my product code
"Step 2/2: See if there’s an update"
I get this
"Latest available software for Nokia N73.................
Version: 4.0812.4.2.1"
But i can dowload only Nokia Software Updater.
Does it contain 4.0812.4.2.1 ? ..i do not think so..
cant download 4.0812.4.2.1 nowhere, what is the point?
i do not understand. Phone is use in Finland.

25-May-2008 08:06 PM
dorf wrote:
My N73 ME current device software version
is V 4.0736.3.2.1
in Nokia update site >>
When i enter my product code
"Step 2/2: See if there’s an update"
I get this
"Latest available software for Nokia N73.................
Version: 4.0812.4.2.1"
But i can dowload only Nokia Software Updater.
Does it contain 4.0812.4.2.1 ? ..i do not think so..
cant download 4.0812.4.2.1 nowhere, what is the point?
i do not understand. Phone is use in Finland.
Nokia Software Updater doesnt contain 4.0812.4.2.1 but NOKIA SOFTWARE UPDATER starts downloading this in the next step for your phone. I guess this is the answer your looking for.
Nokia 5800 XpressMusic (11) [Product ID: 0559416]
V 21.0.025 (date: 02-04-2009)
network: mobily (etihad etisalat)

Similar Messages

N73 firmware update failed but still working?

Few days ago I saw new firmware for N73 is out. Downloaded program, stared to update firmware.
After cca. 90% of progress bar I heard same sound you hear every time you plug in/out your phone over USB cable. My heart almost stopped since I heard stories you must not unplug phone during firmware update, that it will not work after that. Suprisingly software offered me to repeat update process!
I clicked OK and it started all over again.
Once again after reaching about 90% progress bar instalation stopped with same un plugg sound. This time there was no repeat update offer. I tryed everything but update din't work.
I plugged USB out of comp and phone and tryed to turn on phone. I wasn't able to turn in on! Then I took out battery, put it back in and turned on phone.
All worked, menu was in english, but I had option to change it back to croatian again. Installed old programs and they all worked. Voice dialing working, camera working... all working.
What the hell happened?
Why installation stopped on 90% and my phone is working without problems on NEW firmware? Bug in Nokia Firmware update software?

I've understood it's quite normal that the update prosedure may seem to stop even for some minutes and then go on again. The connection between the phone and computer will also break and then reconnect couple of times...
Are you sure, you did wait long enough before unplugging your phone (at least some minutes)?
But if your phone has the new firmware now and everything is working fine so I hope there is no problem!
Nokia N97 v. 12.0.024

MacBook Pro EFI Firmware Update 2.0 will not install.

Hi
The latest MacBook Pro EFI Firmware Update 2.0 will not install.
It runs and I restart my Mac but when I search for more updates it appears as a required update again.
Anyone know why this may be?

I had the same problem today. I called Apple support who transferred me to second level support and no resolution. I decided to try a combination of the items I have seen below.
I restarted my computer. I went to apple support download and downloaded the software EFI firmware update 2.0 by typing in search window. I made sure the power cord was pulled into the wall and the laptop had a FULL charge. I installed the update and the computer restarted.
I went to check the software update window after the update and restart completed and SUCCESSFUL.
I do not know why the Genius Bar or the second level support could not resolve my issues but, by me reading information here I hope at least this issue is resolved.
Thanks ALL.......... Happy Mac ing

HT1237 Firmware EFI firmware Update 1.7 will not load on to computer. Msg states not supported.

Unable to load EFI firmware Update 1.7 states not supported.

According to > EFI and SMC firmware updates for Intel-based Macs
MM61.0106.B03 is the latest Firmware for the 2012 Mac Mini models.
In addition, it looks to me like there never was an update for the Mac Mini 6,2 model.

N73 firmware updated to 4.0750.31.2.1

i wanna to get that Update
"n73 firmware updated to 4.0750.31.2.1"
but i can't find it
plz help me as fast as possible

that update is avilable to product no. # 0543843
put my mobile no. # is 0539295
soo each time i try to update my phone the updater reply that 4.0736.3.2.1 is the last one
Soooooooooo what i can do??

When is N73 firmware update due

I called Vodafone (UK) to ask what I can do with my 8 week old N73 that repeatedly dies on me - whilst idle, on a call, or writing a txt. They said they were aware of issues in the firmware but that they didnt know when these would be fixed. *#0000# = V 2.0628.0.0.1 10-07-2006 RM-133 Nokia M73 (39.01) Is there a planned release date for the update? How will it be available? Are there any automatic notification methods? Many thanks

This is a user to user site appearantly... So no Nokia people here (atleast, don't count on it).
There is a minor firmware update available (from .0.0.1 to .0.0.3) but I don't think that will solve your problems.
Nobody knows when the next big firmware is, although we all think it's near. There is a AsianPacific (APAC) version of a 3.x.x.x. firmware but noone knows anything about it. We're all waiting for it
Updating can be done at a Nokia Service Centre or, when the N73 is added, through the Nokia Software Updater which you can get on their site. This updater already lists a number of other models (N70, N80, N93 and more) but unfortunately no N73. The only way to know about a new firmware is checking the threads on this forum and others I'm afraid.
Btw, you don't happen to have 3d ringtones on (and especially not in combination with 'say callers name' option) since those seem to cause MANY problems.
I'm on the same firmware as you but no problems here, not those anyway. Hope to help

Zen Touch latest Firmware Update...player not connec

I tried installing the latest Firmware update for my Zen Touch (released 2-09).
The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
I have made a firmware update before, which worked fine. After that I updated the media explorer software.
Help is very much appreciated! Thank you in advance.
-tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
Are you trying to upgrade to the .0.03 version?

Intel SSD Firmware Update Tool ISO does not boot

Hello everyone
Yesterday I tried to install Mavericks on my MacBook Pro 13" 8,1 but I got stuck because I have an Intel SSD inside and it seems that MacOSX 10.8 doesn't have the right driver on board. So I downloaded the Intel SSD Firmware Update Tool 2.0.6 ISO, burned it on a CD with DiscUtility and tried to boot from it.
The problem is that it doesn't boot from the CD. It just ends with the blinking/flashing question mark folder.
Luckily I have a second MacBook Pro 13" 8,1 from work. Just out of couriosity I inserted the disk inside this MacBook and tried to boot from it.
Everything went fine. I saw the Intel Firmware Updater etc.
So now my question: What is going on with my first mac? Why does it NOT boot the CD?
What I need to say at this point: I burned the CD with the MacBook from work. Could this be the reason?
hope someone can help me
Best Regards
krebbl

yes that's right. Unfortunatly I don't have a Windows PC.
But like I said, my second MacBook Pro boots from this CD and shows me the firmware updater. My first MacBook with the Intel SSD does not.
And like in the post here http://reviews.cnet.com/8301-13727_7-57575091-263/intel-x25-ssd-incompatible-wit h-os-x-10.8.3/ it should be no problem.
Are there other ways to boot an ISO file?

Firmware Update 1.2 will NOT install.

Hi, I have a 20" Intel Core 2 Duo iMac; 2.16GHz late 2006 Model. Today, I tried to update the firmware when apple told me on the software update that I need to update my firmware. I downloaded the firmware update program. In the Utilities I double clicked on it and it started. It said that I needed to close all my applications which I did and click shutdown. After clicking shutdown it told me to push the power button to restart it manually. It started up and a progress bar appeared on the screen for about 1 second, then it disappeared. The computer restarted itself and it came back to the desktop with the firmware update program saying the same text box as before. It said if this box reappears then the firmware was not properly updated. So, what should I do? The only hardware changes I've made to my computer recently was updating my memory to 2 GB from the original 1 GB. Could that cause this problem? If not, what should I do? Also... the firmware version in the system profiler was the same as before IM51.0090.B08. Please only respond if you have encountered this exact situation before or know the solution, don't reply if you just have hypotheticals that are not directly related.

Bobby..I can't say that I know the solution for sure...but I do have the exact same model iMac as you..and the 1.2 Firmware installed perfectly for me
Reading your post...I am wondering if you held down the power button long enough to hear the rapid beeps while the iMac is restarting and/or the fast flashing of the light on the front of your iMac... mine did both...could be the problem if you didn't hold it long enough...it took about 3 minutes for the update to install
Since you saw the text box and the firmware was not properly updated I believe it said to apply the update again
dave

EFI Firmware update 1.4 was not successful, no progress bar

I have a MacBook Pro 2.16 Core 2 (MBP22.00A5.B02). Software update prompts me to download and update the Firmware 1.4 udpate. After following the instructuions, shutting down the computer, and restarting holding down the power button, I hear the beeps but nothing comes up but a blank (grey/white) screen. After several minutes (like 10) it restarts and the updater returns and shows not successful.
I tried to archived and reinstalled the OS with no luck
I have a 160GB Hitachi HD that came as ordered when I bought the computer new.
I have verified that the HD is GUID partition scheme
Only upgrade I have done is an extra 1GB stick of samsung original memory from OWC
I was hoping the firmware update might help cool down (and quiet down) this noisy "pro" laptop, but no luck. Please help someone.
Console shows:
2007-10-18 16:27:08.270 MacBook Pro EFI Firmware Update[189] MacBook Pro EFI Firmware Update version 1.4
Run the executable in the Contents/MacOS folder with '-h' option to learn about running remotely.
2007-10-18 16:27:08.272 MacBook Pro EFI Firmware Update[189] OS version is 10.4.10 build 8R2232.
2007-10-18 16:27:08.275 MacBook Pro EFI Firmware Update[189] No AppleEFINVRAM
2007-10-18 16:27:23.309 MacBook Pro EFI Firmware Update[189] EFIUpdaterController::showError:1
2007-10-18 16:27:23.309 MacBook Pro EFI Firmware Update[189] CommonUpdaterController::showError:1

Hi macinfrance!
I installed the EFI Firmware update successfully on my computer.
It seems to me that your list of nvram is lacking an entry telling your bootloader (boor.efi) exists on your normal harddrive partition.
I suggest the following (i am not quite sure if it will work):
1. Go to the system preferences and select the startdisk fane. Then, be sure to select your system harddrive.
2. Then restart your computer.
3. Make a restore CD in case something goes wrong (instructions at: http://www.apple.com/support/downloads/firmwarerestorationcd14.html )
4. Try the firmware update again.
When i type nvram i get the following contents:
084202115164:~ dagdiesen$ nvram -p
efi-boot-device <array ID="0"><dict ID="1"><key>BLLastBSDName</key><string ID="2">disk0s2</string><key>IOMatch</key><dict ID="3"><key>IOProviderClass</key><string ID="4">IOMedia</string><key>IOPropertyMatch</key><dict ID="5"><key>UUID</key><string ID="6">C68ABA3F-9D52-4699-AA58-69DDF3DCB1FF</string></dict></dict></dict></arra y>%00
efi-apple-payload0-data %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%02%00%00%00%00 %00%04%01*%00%01%00%00%00(%00%00%00%00%00%00%00%00@%06%00%00%00%00%00qS%00%00%f2 U%00%00%9eP%00%00%f6U%00%00%02%02%04%04^%00\%00E%00F%00I%00\%00A%00P%00P%00L%00E %00\%00F%00I%00R%00M%00W%00A%00R%00E%00\%00L%00O%00C%00K%00E%00D%00%00M%00B%00P%002%002%00_%000%000%00A%005%00%000%007%00B%00.%00f%00d%00%00%00%7f%ff%04%00
efi-apple-payload0 <array ID="0"><dict ID="1"><key>BLLastBSDName</key><string ID="2">disk0s1</string><key>IOMatch</key><dict ID="3"><key>IOProviderClass</key><string ID="4">IOMedia</string><key>IOPropertyMatch</key><dict ID="5"><key>UUID</key><string ID="6">00005371-55F2-0000-9E50-0000F6550000</string></dict></dict></dict><dict ID="7"><key>IOEFIDevicePathType</key><string ID="8">MediaFilePath</string><key>Path</key><string ID="9">\EFI\APPLE\FIRMWARE\LOCKEDMBP22_00A507B.fd</string></dict></array>%00
boot-image %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%02%00%00%00%00 %00%04%01*%00%02%00%00%00(@%06%00%00%00%00%00`%0b%ef%0d%00%00%00%00?%ba%8a%c6R%9 d%99F%aaXi%dd%f3%dc%b1%ff%02%02%04%04%18%004%00a%00a%006%00e%007%000%000%000%00% 00%00%7f%ff%04%00
SystemAudioVolume n
efi-boot-device-data %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%02%00%00%00%00 %00%04%01*%00%02%00%00%00(@%06%00%00%00%00%00`%0b%ef%0d%00%00%00%00?%ba%8a%c6R%9 d%99F%aaXi%dd%f3%dc%b1%ff%02%02%7f%ff%04%00
The first entry is referring to the normal system partition where the loader for the Mac OS resides. The second entry is referring to the hidden EFI partition on the harddrive and the new EFI firmware image.
Hope this helps.

Firmware update: "The device is not connected to the USB por

Hi, I have a MuVo TX SE GB and I tried to load the new .22.03e firmware on it with a Windows XP SP2 PC. But when I connected the device, and started the firmware updater, it searched for a minute or so, and then the reset question appeared. I clicked OK and then I heard the USB sounds and the new hardware wizard appeared. I followed the wizard, but when it was installing the drivers, a message: "The device is not connected to the USB port" appeared, and the firmware updater closed. The hardware installed fine. But when I try to load the firmware again, the reset question doesn't appear, but I hear the USB sounds, and i get the same message again. I also tried connecting the player in recovery mode but that doesn't help. The player won't turn on. When I connect it, the player is listed in My computer, but I can't open it. What should I do, and how can I load new firmware properly?

PCkid23 wrote:
Hi, I have a MuVo TX SE GB and I tried to load the new .22.03e firmware on it with a Windows XP SP2 PC. But when I connected the device, and started the firmware updater, it searched for a minute or so, and then the reset question appeared. I clicked OK and then I heard the USB sounds and the new hardware wizard appeared. I followed the wizard, but when it was installing the drivers, a message: "The device is not connected to the USB port" appeared, and the firmware updater closed. The hardware installed fine. But when I try to load the firmware again, the reset question doesn't appear, but I hear the USB sounds, and i get the same message again. I also tried connecting the player in recovery mode but that doesn't help. The player won't turn on. When I connect it, the player is listed in My computer, but I can't open it. What should I do, and how can I load new firmware properly?
I am having the same type of problem trying to upgrade some firmware on my microphoto. I would love to get input from some of the guru's out there , Have you tried emailing customer support and asking them? I am waiting for their repy but just bouncing ideas off the forum in the meantime.

N73 Firmware Update & Restore of Phonebook/Message...

Hey all,
I recently updated my N73 Firmware to 3.0704.1.0.1. As you know when upgrading it wipes the phone. When I restarted I restored my last backup from Nokias PC Suite to get names/numbers/messages transfered over again to the phone. Unfortunatly in doing this it seems to have removed some of the new firmware features (clock with 'am/pm' screensaver etc.). Do any of you know how to get this back? I've had a look in settings but can't see anything.
Thanks in advance,
Chris

I've understood it's quite normal that the update prosedure may seem to stop even for some minutes and then go on again. The connection between the phone and computer will also break and then reconnect couple of times...
Are you sure, you did wait long enough before unplugging your phone (at least some minutes)?
But if your phone has the new firmware now and everything is working fine so I hope there is no problem!
Nokia N97 v. 12.0.024

Firmware update for 6131 does not work

I am trying to upgrade the firmware on a 6131. Following the instructions on the site leads me to navigate the following path: Menu > Settings > Phone > Phone updates > Download phone software.
Bzzzzzz. No. 'Download phone software' is not an option. Only 'Current software details' and 'Install software update'. The latter option is dim, and selecting it returns a message: 'No software to install', obviously, because it has not downloaded it.
So I try to push the software from Nokia's web site: http://www.nokia.co.uk/nokia/0,,77073,00.html > Get Advanced Settings > Accept Terms > Start > model 6131 > Next > Nokia software (firmware) update over-the-air > Enter security code and my phone number > Order Settings
The page claims it has sent me a text message, including the new software, but it never arrives. I tried with with other 'settings' from the same page several times, and the text messages did arrive just fine for those.
Please help. Thank you,
--Jimbo -
P.S. In case you are wondering, the reason I am trying to update the firmware is that the status of the voicemail waiting indicator is never updated. I have seen at least a dozen posts about that issue, but never one with an answer attached. So this is my next step.
EDIT:removed email addressMessage Edited by jams on 16-Oct-2006
02:34 PM

Do you mean you're having a problem trying to download the update, install the update, after the update is installed trying to re-activate the phone? I assume you're getting this message on your PC, not the phone...? Or are you having problems with Internet connectivity on the phone itself? WiFi or 3G?
If it's problems on the PC, try disabling all antivirus/firewall software and see if that takes care of it.

Aluminum keyboard firmware updater caused my Mac not to boot.

After installing the recent (4/8/08) keyboard firmware update, my iMac G5 refused to boot past the grey apple screen, too. Got the spinning paddle, but multiple hard shutdowns and restarts failed to get it past that point.
I ended up booting the Leopard Install DVD and tried to reboot into my backup, a Superduper clone of the drive from the previous night. Wouldn't do it -- got the same result.
Used Disk Utility (on the Leopard DVD) to repair the disk/permissions. The only significant repair was this:
permissions differ on "private/var/log/secure.log," should be -rw-------, they are -rw-r-----.
Now, I don't know what that means, but maybe it's relevant.
I rebooted -- and still was unable to get past the grey screen. I tried repairing permissions a second time (and nothing unusual came up) and it still failed to fix the startup problem. I also used the repair disk function (between permissions repairs) and that had no effect, either.
Ultimately, I was forced to do an archive and install of Leopard, which then allowed me to boot successfully.
Really disappointing -- this is the kind of thing I expect Windows users to have to deal with, not us.

I have MacMini with Wired Aluminum Keyboard. I have all the current Firmware and Software updates. The computer will not startup with the install disc using the "C" key nor will it start up with my second attached hard drive using the "Option" key. Now if I use my old Black Apple Keyboard both of these functions work beautifully.
The real problem is the lack of knowledge about this on the part of Applecare and the Geniuses at the Apple Store. They don't even know about these discussions on the Apple Site nor any other internet site that is discussing or has discussed this issue.
I wasted 2 hours with Applecare. They had me do the usual things such as resetting the Pram, disconnecting all cables and resetting the startup manager. You name it they just follow the book and waste your time and theirs.
Their final conclusion was that my keyboard was defective so they made an appointment for me to bring it into the Apple Store. The Genius in the Apple Store hooks my keyboard up to another computer. I don't remember which model it was but I know it was not a Mac Mini. Anyhow he comes back and tells me my keyboard is fine. He says the RAM in my Mini has gone bad. So I replace the RAM. Still have the same problem.
Well unless someone in this discussion group can tell me what the REAL problem is, I will keep my old Black Keyboard close by.

IMac SMC Firmware Update 1.1 will not load. Help!

I have just purchased an iMac with a Fusion drive. The App Store tells me to install "iMac SMC Firmware Update 1.1." I have tried to do so several times, leaving the computer alone until it restarts itself. But the update does not seem to have taken place: the udate is listed among the updates accomplished, but it continues to appear at the top of the screen as the available update and the badge for an update still appears in the App Store icon.
Any suggestions? Is that a faulty upgrade? Have I got an faulty Mac?

But isn't the Fusion drive in part a flash drive?
And if I don't need it, how do I dismiss it? Will my App Store Icon forever have a red badge telling me I have an unneeded update to install?

N73 firmware update-to be or not to be

Similar Messages

Maybe you are looking for