N73 freezes when sending a message

Hi , my Nokia N73 Phone freezes when sending a message. Other unctions are working fine.
The phone software is updated with latest version.
Need help guys!!!
Cheers
Sachin

update you stuff and try code number two, you will lose all phone data but it might help your issue
*#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list.
*#7370# - Reformat your phone
This you perform as a last resort. Nothing else is working. Turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
re-flash - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

Mail freezes when sending a message

Mail freezes for a few seconds when sending a message after upgrade to Mac OS X 10.9. I have a MacBook Pro Retina i5 8GB 256 SSD and this problem occur after install new MacOS.

I'm having this same problem, when i send an email the mail app, freezes up until the mail is sent
its very annoying

IMessages freezes when sending a message

Recently, (past few days), everytime i try to send an iMessage via my MBP 2GHz i7 8GB RAM 500GB HDD it freezes..
I get the coloured spinny wheel and then after a few seconds it sends the message, but this happens EVERY time :/
Wonder if anyone else has a solution or is experiencing the problem too?

Hi,
Although you are unlikely to see a spinning beachball on an iOS device are they slower in Sending as well ?
It is more likely to be a Server issue.
10:23 PM Tuesday; December 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT1430 When sending a message to some email recipients, appears the following message "The recipient X was rejected by the server because it does not allow relaying.

When sending a message to some email recipients, appears the following message "The recipient X was rejected by the server because it does not allow relaying.

See the previous discussions on the right side of the page under the heading "More Like This". The one with the green checkmark was solved.

When sending email message appears "sending the message failed because you exceeded your sending limit. A copy has been placed in you outbox"

When sending email message appears "sending the message failed because you exceeded your sending limit. A copy has been placed in your outbox"

Who's the provider? Do they have a limit?
https://discussions.apple.com/message/22929931#22929931

Mail Freezes when sending forward or reply

Hi there,
Starting two days ago Mail.app has been freezing when I am trying to send a reply to a, or a forwarded, email. I have searched this discussion group and found a thread at http://discussions.apple.com/thread.jspa?messageID=3272941&#3272941 , but I don't think that it applies to me because:
A. I'm working with a POP account, not a .Mac account.
B. If I'm reading the Hawkwings and Macgeekery stories cited in the thread correctly, they're talking about freezes when hitting the "forward" or "reply" buttons. My Mail.app freezes when I tell it to send the message.
C. Does not come out of beach ball mode. Must have to force quit to cure.
However I did take care to check my keychain to make sure that it wasn't checking .Mac and or for any certificates. It isn't. Also made sure that my preferred network connection was listed first. I also rebuilt my mailbox. What's really puzzling is that I can send new messages at will with no hassle.
Any Suggestions?
Thanks in advance.

Hi Malcolm.
The fact that in your case Mail doesn’t freeze until hitting Send indicates that your problem is different, indeed.
Anyway, in addition to ensuring that the configuration used to connect to Internet appears at the top of the list in System Preferences > Network > Show: Network Port Configurations, try turning OFF all the port configurations except the one needed to connect to Internet and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
Do you have any Mail plug-ins or system utilities that could interfere with Mail? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/StartupItems/
/Library/InputManagers/
~/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/Mail/Bundles/
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.
<hr>
Try to obtain additional information as follows:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that Console displays the contents of both system.log and console.log.
3. Reproduce the problem and look at the bottom of the Console windows for messages that might be written there as a result. If any, they may provide some clues.
<hr>
Try this to check whether the problem is system-wide:
1. Go to Apple Menu > System Preferences > Accounts and create a new user account for testing purposes.
2. Either log out of your main user account or just quit Mail so that it does not interfere with the other user account.
3. Log in as the newly created user and set up Mail anew there.
4. For spam-related security reasons, go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
5. If you set up a POP account, go to Preferences > Accounts > Advanced and disable Remove copy from server after retrieving a message if it’s enabled, to avoid messages being accidentally removed from the server while testing.
6. Check whether the problem also happens when logged in as another user.

I have an iPhone 5 on the Sprint Network. My iMessaging seems to work when it wants to when sending a message to others on the Sprint Network. I can send an iMessage to someone on Verizon during the same time and it works just fine?

I have iPhone 5 on Sprint. My husband is also on Sprint and my iMessage to him seems to work whenever it wants. I can iMessage to friends who have Verizon at the exact same time I am trying to iMessage my husband and the iMessages will go to and from the Verizon friends just fine, but not to my husband. With him its not even pretending to send our messages as iMessages. The send bar isn't even blue to him. To me this seems like an issue with the Sprint Network, but I wanted to see if anyone had had the same/simmilar issues and it ended up being the phone.

I can tell you that with Sprint their coverage area isn't as good as Verizon or AT&T.
Are you sending these imessage while on wifi or cellular data? Also your husband would need to be in a good coverage area.
Usually when imessage is unavailable it will send it as a text. Does your husband receive your imessage as a text?

Problem when sending a message on a new email address

I created a new email address on my Iphone . I can receive the messages but when I want to send a message the application says that the username or the password is wrong although I create the same on my MacBook with the same username and the same password and it runs as well....

Thank you ckuan,
My outgoing server wasn't filled up well . the outgoing was wrong and doesn't match with my Internet supplier's ...
thank you for your help

Communication error when sending PI message from Integration Engine to AE

Hi Experts,
we currently installed and configured PI 7.3 system. Even I run post installation PI configuration several times, we are still facing error when Integration engine sends message to messaging system. ( my scenario: I send test message to IE directly, avoiding AE )...
It might look easy: but even adding PIISUSER full authorization and system restart, the result is the same. I don't know if it could have connection but I also get HTTP 200 instead of HTTP 500 when testing INTEGRATION_DIRECTORY_HMI destination.
Thanks for any help.
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx:xxxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSER</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2948</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="1" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>

Hi,
So this password change in Exchange Profile + su01 transaction + system restart didn't help.
I increase trace level, and this is even more detailed log in pipeline step Call Adapter.
We also find out that when message arrive to IE we have in java log three entries:
LOGIN.FAILED
User: N/A
IP Address: xxx
Authentication Stack: sap.com/com.sap.aii.af.ms.app*MessagingSystem
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule    SUFFICIENT ok          exception             true       Received no SAP Authentication Assertion Ticket.
2. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false                 true
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
This log is logged under J2EE_GUEST User.
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
Last two logs are logged by SLD_CL_PIQ user.
Thanks for any help!

- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="2" type="T">no values in cache (lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSERA</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2941</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="3" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>
</Trace>

Why is the send button grayed when sending a message from contacts on my I pad

Why is the send button grayed out when trying to send a message from contacts using my I pad

Stick with one post at a time. Otherwise, it gets very confusing.
https://discussions.apple.com/message/18529200#18529200

Nokia n80 freezes when sending txts help!!!!

I have a nokia n80 it freezes every time i try to send a message, it comes up message failed. Anyone else with same problem?Message Edited by cariad on 24-Mar-200705:29 PM

Have you downloaded the Free Sms Accelerator application from Nokia?
I think this will definetly solve your problem.
Nokia N95
V 20.0.015
0546553

Why do I get an attaching message when sending a message with embedded pictures.

Sometimes when I try to send a message with embedded images, I get a message stating "Status: Attaching . . . with a green Progress: bar that appears to be 100% but still running". The problem is that it never goes away and the message is never sent.

Do you have MMS turned on? Do you have a data connection?

National Access Coverage Not Available message when sending picture message

I don't understand why this is happening. I have a strong signal and my 3G indicator is on. Why is it trying to use National Access? How do I send this message? HELP!!

This seems to be a problem that comes up occasionally. I have a Droid2 and keep getting this same message when trying to send a picture message to someone. I've checked the version settings as was listed in one of these post and everything matched. And I did a update...
I still get this message.
any other suggestions?

No sound when sending/receiving messages

When I send a message in Mesages and with iMessage I hear no sound. However when I send messages in AIM with Messages sounds work just fine. Any suggestions?

https://discussions.apple.com/message/22192128?ac_cid=tw123456#22192128
(I answered in the other thread)
10:07 PM Saturday; June 8, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Error sometimes when sending a message

When I hit the 'send' button after composing a message, I often get an error:
Sending of message failed.
Unable to open the temporary file C:\Users\[myname]\AppData\Local\Temp\nsmail.tmp. Check your 'Temporary Directory' setting.
Dismissing the error message and clicking on 'send' again is usually successful.
I've noticed this error seems to occur most commonly when I have spent considerable time writing a longer than normal message.
Version: Thunderbird 24.3 under Windows 7 64-bit.

I should add that the number anti-virus products which Thunderbird has a problem with does not indicate that the fault is elsewhere.

N73 freezes when sending a message

Similar Messages

Maybe you are looking for