N73 - Full-Screen MMS attachments?

My friend and I both have N73s (music editions), and in the past have been able to send photo messages via MMS and be able to view the attached picture in Full-Screen using the relevant option.
Now when we do it (and it's happening both ways) the photos are very small and have a large white border around them. We're both with Orange on contract. Is there anything obvious happening or something to check to get this back to how it was? We've checked the camera settings and they're both on High Quality (print).
Any help greatly appreciated.

ok. now you should take a picture from your camera LARGE picture--select it from camera settings and then set it as wallpaper. this is not at all a software issue. its just got something to do with your picture size.
try downloading pictures from the net specific to your n73 phone screen size and they will work out best !
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Similar Messages

Help with Noika N73 Full Screen Wllpaper?

Hi there all i am new to this forum. I am glad I have found this because it is a huge help for people who love their Nokia's lol.
I have a problem with my nokia n73.
Phone Details:
Model: Nokia N73
Version: v 3.0704.1.0.1
RM-133.
I have just had this phone sent back from nokia. They reported it had a software problem which is now resolved. I am unable to use my Pictures and a Full Screen Wallpaper.
All help is much appreciated
Many Thanks
Jassi

ok. now you should take a picture from your camera LARGE picture--select it from camera settings and then set it as wallpaper. this is not at all a software issue. its just got something to do with your picture size.
try downloading pictures from the net specific to your n73 phone screen size and they will work out best !
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full scree

I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full screen is there any way i can click on the attacment without going out of full screen

I don't know why the change, but the pointer appears in the same way as it does on the main screen, not a pointer. There does not appear to be anyway to change it. You may want to submit a comment to the Features Requests: Acrobat Feature Requests. I also submitted this as a bug.
As a clarification, your "adobe acrobat 11 reader writer" is not informative. There is Acrobat 11 and Reader 11. Writer is not a product as such. So you have referred to Acrobat in a contradictory manner. In the future, please just indicate Acrobat 11 or Adobe Acrobat 11.

Is anyone else having an issue with mms videos being played in a message bubble instead of full screen? I'm on a 64 Gb 6 plus

mms videos only play in message bubble not full screen like it's supposed to on 6 plus

I'm not.
Thanks for asking.

Display image in full screen

Hi everyone, I am a newbie for labview. I just wanna ask you about image display in labview. Now I can display one image in my front panel. I open the file path and display it. First thing I wanna do is that is it possible to display on monitor full screen not on front panel and second thing is that how can I display images in folder and display it about 2 seconds delay in between? Pls kindly help me.
Thanks millions.
Solved!
Go to Solution.

Hi there,
-I don't know whether the image full display can be possible or not, Any reason why you are asking for such requirement?
-The other question about reading files in a folder and display for 2sec can be done like shown in image.
-I've attached vi in lv 12 if needed.
-Next time, please post your vision related queries in Machine vision Board.
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13
Attachments:
Image_read_folder.vi ‏43 KB

Menu bar no longer appears in full screen mode

For some reason today my menu bar no longer shows up when I move the mouse to the top of the screen in any application. I have tried restarting several times, opening and closing applications, taking apps in and out of full screen, ran disk utility. All to no avail.
Not sure if this is related, but I attached an external drive and booted to the recovery volume on my mac to install Lion on the external drive. It hung at the download so I quit and rebooted to my main drive. Everything worked normally except for the menu bar.
Software up to date, 2008 MacBook Pro with no attachments.
Any ideas?

After not using the computer for 30 minutes, the menu bar is now working again. Must be a bug...

I've lost the ability to turn off Full Screen

Since software was updated yesterday, i've lost the ability to turn off Full Screen, and it's driving me mad
I've used help and it told me to go to Display options, but all i have on there is Page Overview, View Images and Page Info.
Help!

yeah right, in previous firmware there was an option to go full screen manually, but now when page loading completes, it goes automatically full screen, and according to my experience it can't be turned off, we have no option but to click the Arrow button in corner to get back to normal screen.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Vista full screen slowness

we, as a company, are trying to create some interactive
videos, using Flash CS3 and/or CS4. main end user (CEO) wants the
videos to run full screen, so they are being published as .exe
files. when running the videos on any computer using Vista O/S,
they run slowly when in full screen, but speed up nicely when out
of full screen. also, they run nicely in XP, full screen in and out
of full screen.
in google searches, i have seen references to vista running
flash in a low priority, so have attempted to make the exe run in a
high priority, that didn't help. my guess is that the exe is
running in a high priority, but the flash inside of it is not. my
thought is that the player started by the fscommand is what
actually needs to run with high priority, but we don't know how
to/if we can get that part of it to run high priority.
so first, does it seem likely that the problem is where i
think it is, and second, can the player wrapped in the exe, and
called by fscommand be run in an high priority? and if so, then
how?
also, saw suggestions to try running in winxp compatibility
by way of right click menu on the file in vista, that didn't help.
assuming that is also because only the external wrapper is being
run in xp compatibility.
also also, end user computers are running as high as 256MB
Radeon x1950Pro, 4GB RAM, Vista Business, 2.4GHz dual core
processor. results the same on higher end as lower end computers.
any ideas? am i way off base in my guess?
thanks

You many want to use wrapping it up in Jugglor and see it
speeds up.
Download an evaluation copy and try it
http://www.jugglor.com
Hope this helps.
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
DISCLAIMER:
This email message is intended only for the addressee(s) and
contains
information that may be confidential and/or copyrighted. If
you are not the
intended recipient please notify the sender by reply email
and immediately
delete this email. Use, disclosure or reproduction of this
email by anyone
other than the intended recipient(s) is strictly prohibited.
All measures
have been taken to ensure this email is virus free - however
no warranty is
made that this email or any attachments are free of viruses.
Virus scanning
is recommended and is the responsibility of the recipient.

What is the quickest way to render video full screen?

In my application I am capturing video from a frame grabber at 640x512 resolution. I need to render output to a full screen window with adjustable scaling, and I need this to run at 60Hz.
At the moment I am rendering the video using IMAQ WindDraw, unfortunately it isn’t fast enough when rendering full screen. Drawing to a 640x512 window it manages 60Hz. To get “full screen” output I scale the image by a factor of 2 and draw it to the middle of a 1920x1080 borderless window, matching the screen resolution. In this mode the frame rate drops to roughly 30Hz. (I have verified that it is the rendering not the scaling which is slow.)
I can see three options for increasing the speed:
1. Accelerate the WindDraw function.
(new drivers? faster graphics card? I don’t understand why the drawing process is so slow.)
2. Use a 2D surface in the 3D Picture function.
(I know this uses hardware acceleration I feel it should be quick, but I don’t have evidence and I am having difficulty getting the picture camera setup to avoid distortion.)
3. Use activeX to interface to an external software renderer.
(I know this could work but I have no experience using activeX or interfacing with external programs from Labview, so it is very daunting!)
Does anyone have advice? Any guidance would be greatly appreciated.
Thanks
Luke
Luke_A_P

Christian,
I have created a demo .vi which includes a simplification of the back-end of
my application. I have made this demo so that it can render a dummy video
sequence using 3 different methods; IMAQ WindDraw, a 2D picture and a 3D
Picture. You can run it and swap in real time between the rendering modes and
it reports the framerate. You can turn 2x scaling on and off to see the large
effect this has on speed. (I have found drawing the 2x scaled IMAQ to a full
screen window is slightly slower still than the 2x mode in this .vi.) After you
switch modes bring the appropriate window to the foreground in order to get the
proper rendering speed.
Using bits from a few examples scattered around the forum, I have put
together a 3D picture video renderer. This was not very difficult but
unfortunately it is very slow. Playing around a bit, I think it is passing the
texture to the object which is slow, not the rendering. I wonder whether
anything can be done to improve it. (I also tried it on a laptop with an ATI
Radeon graphics accelerator, it was slightly faster, ~10Hz and the frame rate
was not affected at all by the window size, which I think slows the rendering
is not the bottleneck in that case.)
In my full application I have to do about 7ms worth of image processing
before the data is ready to display. So whilst this demo .vi gets about 59Hz with a
2x zoom on the image, in the real application I get less than 30 Hz!
I hope you can make some sense of this, please let me know if you have any
questions.
These are the speeds I got on my Lab machine:
Core 2 Duo 2.6GHz
3GB RAM
Video Hardware:
Intel(R) 82945G Express Chipset Family
IMAQ
1x - 170Hz
2x - 59Hz
2D Picture
1x - 40Hz
2x - 18Hz
3D Picture
1x - 6Hz
2x - 3Hz
Thanks,
Luke
Luke_A_P
Attachments:
Render speed test.vi ‏56 KB

Full screen view missing from display options in b...

I've been trying to find out to switch off full screen on the browser on my 5230, it annoys the heck out me. According to the browser help there should be an option for full screen view in the display options of the browser, it's not there though and that makes me feel sad and angry and a little horny :-). Any help very much appreciated.

Look at this;
/t5/Nseries-Devices-and-S60/I-ve-lost-the-ability-to-turn-off-Full-Screen/m-p/695076#M210741
i think same is with 5230.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Full screen graphical output

I am working on a project for a school where I need to do fast (relatively speaking) graphics rendering in real time.
Essentially, I have 5 computers; 1 Server and 4 clients. Each client is hooked to a projector and is responsible for one letter of the word LASA. I have the network bits working, so that each client is told what color and what position to draw the letter at, but now I am having trouble with getting it to draw quickly and smoothly.
First I tried working with just making the pane full screen using a property node and modifying its background color at runtime, this worked great, so long as I didn't try to change anything on the panel, which made moving the letter using this method impossible. Next, I thought I could use an image control since they are designed to handle quickly changing graphics and I could then just pragmatically generate the image on the fly. While this seems like a great idea, I can't figure out how to make it full screen.
Any help is appreciated.

Attached is an example of the picture control doing this by changing the origin. You can coordinate VIs by changing this origin synchronously in your displays using commands. You can change the appearance of the VI front panel so that the title bar, scroll bars, etc are all not shown, and even make the background transparent, then maximize it. The picture control allows you to easily change the background color of your text using either a rectangle in the background or with the text background itself (if the text is large enough). You can programmatically scale the picture control and font size so that it looks good on your monitor. You could also programmatically make the VI front panel slightly larger than your monitor so there are no seams. Remember to have a way to close everything. The picture control has a rich set of mouse events, so this should be pretty easy.
Let us know if you need more help.
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
ScrollText.vi ‏13 KB

Maximize Graph on Screen to full screen

I am looking to simply take a waveform graph and when I click a button next to it, I want to maximize it to full screen size. Whn I mess with teh bounds properties, the buttons at teh bottom of the graph dont grow accordingly and it appears messed up. Any recommednations on how to proceed with this?
Solved!
Go to Solution.

Here is a crude way; you may have to play with it if you don't want all of the controsl to resize.
CLA, LabVIEW Versions 2010-2013
Attachments:
resize.png ‏30 KB

Can not properly view cover flow in full screen in external display

My mac is the new Mac book pro 15.4 inch screen and I connect my mac pro to external display e.g. Samsung LCD monitor 24 inches.
The bug is that I can not PROPERLY view full screen (in external display) for some application e.g. iTunes, and Front Row.
- When I use iTunes, I can not properly view Cover Flow view in full screen (in the external display screen) except the case of mirror display.
- For Front Row, I can not view full screen in external display but only my mac display.
However, for other DVD or VDO players, I can view movie on external display in full screen and I still be able to do other works on my mac screen.
Please let me know how to solve it.

found the likely issue! are you participating in youtube's html5 trial? go here and it will tell you if you are:
http://www.youtube.com/html5
exit the trial and it should fix the issue. it worked for me!

Who do I complain to regarding an Apple iPhone upgrade that has taken my my full screen contact picture and turned it into a tiny circle that is hard to see at a glance!!!

I'm trying to find an outlet for the frustration I feel regarding the "upgrade" that replaced my full screen picture for my contact numbers to a tiny, little dot in the right hand corner. Are they going to give us an option to go back or did someone just need to justify their job by making changes??

Apple.com/feedback

How can i print an Excel file when in the full screen mode (no print options on toolbar or right clk

using Vista, sometimes after creating and saving an excel file, the document is not visible when the file is reopened.
selecting full screen mode makes the document visible, but the toolbars disappear and the print option does not show up on a right click. How can i print the document and see the document in some other mode than full screen?

In order to print, you can click the CTRL+P keys to launch the print dialog,
Regarding the missing toolbar, try clicking the ALT key to shouw the software menu, then look around under the view option for any available toolbar settings,
If you cannot find it, i would recommend you to try the Microsoft support forums, as they have some more knowledge with their software features
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

N73 - Full-Screen MMS attachments?

Similar Messages

Maybe you are looking for