N73 gets stuck on a white blank screen. what to do...

my N73 Media gets stuck on a white blank screen. what to do?
it starts and then goes immediately to white bright screen. It is stuck and nothing at all, not even being able to shut it down. I have to remove the battery to shut it down.
Please Help

try to remove memory card.
if removing memory card doesnt work, you have to format the phone;
Hard reset. Switch the phone off. Press and hold three keys together, the green key, the * key and the number '3'. While you are holding these keys, switch the phone on. Don't release these three keys before you see the NOKIA logo.
Warning! Hard reset wipes the C (phone memory) drive.
If you want to thank someone, just click on the blue star at the bottom of their post

Similar Messages

My ipod nano 4th generation will not turn on when i rstart it it gets stuck on the apple icon screen what do i do

my iPod will not turn on when I charge it or restart it it just gets stuck on the apple icon screen what do I do to fix it

Hello crimsonflare,
Try this first:
Apple - Support - iPod Troubleshooting Assistant
If that does not work, use this:
Putting iPod into Disk Mode
and try to restore you ipod.
Hope this helps.
~Julian

I have an ipod that when you turn it on all you get is a lit up white blank screen what do i do

i have an ipod touch when you turn it on the screen just lites up white with no words or anything what do i do

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

E 72 crash and stuck on white blank screen

i just saved mms settings and rebooted my E 72 and then it would not start. it gets stuck on a white blank screen. what to do?

Try doing the following as well:
1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
- Make sure you back up your data first as you will lose all of it when you perform. The default code for ALL operations listed here is 12345.
2.*#7370# - Reformat your phone. ALL data may be lost. still it is a good idea to always do a back up of your stuff.
This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.

Please help! Blackberry Torch 8610 stuck in white blank screen!

sorry for my bad english..
i'm indonesian ^^
before this problem happends, about 3 days ago i've got an error message saying built in media got an error so must repair it or wipe it.. i tried to repair it, but it keeps saying built in media repair failed. so i wipe it..
but, a couple of seconds after i click wipe built in media, my blackberry reboots by itself..
after it finished rebooting, my blackberry tells me built in media got an error again.
and i tried to wipe it again but my blackberry still rebooting it self again.
this happends 4 times in a row.
and then, when the fourth reboot finished, i tried to wipe it again..
and yes, the blackberry still rebooting itself again.
but, this time, my blackberry didn't finish rebooting, the loading bar stuck in 3/4 of the bar.
its stuck like that for 3 half days.
i tried to fix it with app updater, but its still stuck in 3/4 of the bar.
so today i tried to fix it with JL_cmder
i tried to restore it to factory default.. but it keeps failed connecting to the device..
the third time i tried, it got a white blank screen when reaching the 3/4 loading bar..
please help..
i would really appreciate your help.

Download BBSAK onto your computer. Connect your phone to the computer and close out BlackBerry Desktop Software as soon as it opens. Then start BBSAK and do the wipe from there. You should get a screen saying there is no OS. At this point you should be able to install the OS either from BBSAK or from the BlackBerry Desktop Software. Try it and report back.

When I open the settings and messages of the iPhone 4s I get stuck in a white screen, what should I do? the keyboard to open there is minute, I can not open the settings in any way.

when I open the settings and messages of the iPhone 4s I get stuck in a white screen, what should I do? the keyboard to open there is minute, I can not open the settings in any way.

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi Claire, sounds dire, but some things to try...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help :(

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I open my iBooks and it has a white blank screen. I cannot get to my books.

I open my iBooks and it has a white blank screen. I cannot get to my books.

My device is iPad mini

IPOD Help~(cannot view anything except a white blank screen)

Alright...I never expected to post up something in this discussion thread this soon...since I got my 30gig iPOD just three days ago...and curious as I am to things...I think I broke it, hah~
Anyways...I need some help.
Here's the story.
I was updating my iPOD to a newer version, I'm assuming...and during the updating process...I accidently 'x'ed out of the box...and now my iPOD screen does not show anything except for a white blank screen. If I hold down the menu and center button for six seconds...It shuts down...but when I release/let go of the buttons...it makes a ring sound and goes back to the white blank screen.
And also...when I go to the start menu and look under the iPOD folder...it has an update your ipod thing...I clicked it...and it pops up with a screen, saying stuff like it's 'initializing'...and tells me to plug in my iPOD with the usb chord...but I get a message saying 'can't mount iPOD' or 'internal error'
I think I've tried anything there is to solve this problem...like the five R's...etc.
I do not want to think that I broke my iPOD already. So if anyone knows, please reply back.
Thanks in Advance

Hi Sky,
Hmm - I see the shapes, I'm not sure why they're disappearing when you draw them - too simple of a file to point at some other issue. It seems like something with the installation went wrong or is missing (the player that renders the Stage for AS3 documents). I think the first thing will be to get the update. Can you try downloading from this page instead of through the update manager? http://www.adobe.com/support/flash/downloads.html Then try running the executable that you download. If this doesn't fix it, Flash may need to be fully removed and reinstalled.
Jen.

My iphone 5 suddenly has a white blank screen, no liquid contact or history of fall, what can i do with this problem?

my iphone 5 suddenly has a white blank screen, no liquid contact or history of fall, what can i do with this problem?

Hey there Galileo,
It sounds like your iPhone screen is solid white and you cannot do anything with it. Take a look at these steps from the following article about that kind of issue:
Get help with the screen on your iPhone, iPad, or iPod touch
If you see a solid color screen (black, white or blue)
Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
Reset your device while it's plugged in.
If resetting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Thank you for using Apple Support Communities.
Regards,
Sterling

I accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this?

i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this? my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

When i try enlarge youtube to fill the screen it just opens a full white blank screen

when i try to show a extended few a just get a large white blank screen.
this happens with youtube or if a am viewing lets say a shirt and it shows me to click here to enlarge pic and I get this white screen. i am running xp sp3

I had a same problem and I just fixed it. I don't if firefox update or what update made it but to fix you need to do this:
When you are at the video, before you make it fullcreen, right click and go to setting, when that opens uncheck enable hardware accelarator and than just click close.
Good luck :)

My iphone 4 regularly gets stuck on the apple logo screen and stays there until it runs out of battery, and even during charging. what can i do? I have restored it, still it gets stuck on apple logo, anyone pls help.

my iphone 4 regularly gets stuck on the apple logo screen and stays there until it runs out of battery, and even during charging. what can i do? I have restored it, still it gets stuck on apple logo, anyone pls help.

Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome.

I have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

i have a ipod nano 4G, and to sync my music, i have to put my ipod in disk mode. but when i try to turn it on regularly, it gets stuck on the apple logo screen. any idea how to keep it from getting stuck?

Did you also check under Albums? All Songs?
iPod Nano 5th Gen. User Manual

N73 gets stuck on a white blank screen. what to do...

Similar Messages

Maybe you are looking for