N73 Installer starts after reboot

N73 Installer always starts after rebooting the machine. and during this time i can't use my mobile.
please help me to disable Nokia installer at bootup.
it takes around 3-4 minutes to exit from its operation.
thanks
sudhakar

Hi godithisudha
Have you tried backing up phone data and reset *#7370# followed by 12345 (Nokia default unless changed by you) in case anything got corrupted?
It may be an idea to reformat memory card as well after saving data!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

SSHD starts after reboot?

Hi!
I need to make a script which disables telnet, ftp etc. accesses to a Solaris 9 host in order to use only SSH connections to that machine.
I would like to be sure before disabeling all those services that ssh is enabled and the daemon will start after restart. Is there any way to check this?
Thanks.

Hi
The sshd startup file will be mostly in
/etc/rc2.d (To check if it works run sshd2 stop & sshd2 start)
Once you have confirmed disable telnet & ftp in inetd.conf file
Re-run the inetd command to re-read the inetd.conf file.
In case the ssh daemon does not start after reboot then you always have the (Assuming) root password and the console access which shoul dhelp you to start the ssh daemon.
Rgds
HGN

PC Suite 6.86.9.3 does not start after reboot

Hi!
I have some strange problems with the PC Suite. After the first install everything is working well but after a reboot the PC suite is not starting after double click on the desktop icon.
But i can install tools on the phone or start some of the suite tools. Only the PC Suit does not run.
The repair function of the installer does not bring any results. The only way ist to deinstall the suit and all drivers and to clear all remainig nokia registry entries. After that I can install the suite again and it will run again... until I reboot the system. And so on, and so on...
Does any one have an idea how to solve my problem?
Thanks
Michael

Actually it does not work on one Windows XP SP3 computer, but it does work on another Windows XP SP3 computer.
Probably this is a .NET application, as I have encountered several .NET applications that do NOT work on some specific computers.

OCS 10.1.2 on Win2003 - mail application cannot start after rebooting serve

Hi
We have installed OCS 10.1.2 on Win2003 (single box) and the mail appln was running OK after the installation. On rebooting the server, we found some components that were not started (eg Internet directory for Infra) which we started manually via EM.
The Mail application however cannot be started giving the error message for all the mail components:
- failed to start a managed process after the maximum retry limit
We tried to start it manually using
- oesctl startup midtierhost:um_system:xxx
and even got the message:
- All processes already started for midtierhost:um_system:xxx
However, in EM, or when doing a
- oesctl show status midtierhost:um_system:xxx, we get the error message:
- midtierhost:um_system:nntp_in:116107583446856959 <no response>
Any idea of where we can check to see what's going wrong? I'm not sure of where to check the logs for possible errors.
Thanks for your assistance

Glad I could be of help - maybe you could help me out too, please? I have the following problem: when I create an appointment with Calendar, and add some participants to it (with email notifications option checked), at first everything seems to go the right way.
But if I delete the appointment/meeting, the following happens:
- the notifications regarding the delete of the meeting are not sent
- the whole mail system seems to hang, and I am not able to send emails anymore
Do you have the same behaviour on your installation? It would be useful to me just to know if other people are having this trouble....
Thank you!

Mountain Lion Setup doesn't start after reboot

I have a curious problem:
I wanted to upgrade my MBP to ML, but it doesn't work. I start the installation script, accept the licence agreement and choose the SSD as the installation target. The installation script prepares the installation (Install OS X data folder is created in the root directory) and want to restart the MBP to execute the installation.
But the restart doesn't start the upgrade, it starts the login screen and after that I'm back on my old 10.7.4-based desktop without any installation. What's getting wrong here? How can I force starting the prepared installation after reboot?
My SSD is encrypted with FileVault 2, maybe this is a relevant information.
How can I upgrade my MBP? Please help!

Unfortunately this is not the reason.
It doesnt't make any difference if FIleVault is activated or not. I decrypted the complete disk, but the problem still remains.
Any ideas? I can't believe that ML ist not installable on a six-month-old MBP :-(

EM Personal Edition Won't start After Reboot

...I installed Oracle 10g on a WinServer 2003 machine. EM worked fine after installation of Personal Edition; after reboot, EM service won't start. Everything else works; I can even query the HR tablespace from Access and SQL Server. I've set the correct user roles on the SYS, SYSMAN, SYSDBA, etc. accounts.
I also noticed that after the reboot, the folder that was previously called:
OC4J_DBConsole__ORABETA35
Is now called:
OC4J_DBConsole_192.168.2.18_ORABETA35
...but when I try to start the service from the services snapin it looks for the previous folder. So I copied the new folder into another folder and renamed that to the previous name to see if that would work; it didn't.
thanx,
John Bonifas

There's a systemd service so maybe try systemctl enable [email protected]
There's also a checkbox in the dropbox preferences for starting on system boot.

OS X Mavericks installations fails after reboot, stuck. Safe mode does not help

Quick Summary: Installation of Mavericks gets stuck after reboot, no safe mode boot, only recovery console works.
Update: Currently following procedure http://support.apple.com/kb/TS2570?viewlocale=en_US
I have upgrade 4 out of my 5 machines, but the most important iMac 27" mid 2010 went through with the installation and then got stuck on a grey screen with the apple logo and a spinning wheel for 6 hours.
A few restarts did not help.
Started from recovery a new download and install. But it ended up in the same end.
Trying safe mode/boot, but does not finish
Going back to recovery and try repair disk, does not help
Going to recovery using terminal resetpassword and then setting the permissions for all login accounts back, no good.
Going to recovery and using terminal to check /var/log of the mounted Macintosh HD.log shows at the end "The installation was successfull"
System.log shows
com.apple.kextd: Failed to send personalities to the kernel.
Error: Couldn't send kext personalities to the IOCatalogue.
Exited with code: 71
Throttling respawn: Will start in 8 seconds.
Resetting NVRAM/PRAM and reboot, waiting so far stuck but I still hear some disk activity, waiting a little bit longer.
Any help?

Do you have a Recovery HD from your previous systems?
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
      "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the desired disk icon from which you want to boot.
5. Click on the arrow button below the icon.
Look for another Recovery HD, although you need the OS 10.9 one if it's available. If it's not, then you will need to start over from scratch by erasing the drive then reinstalling 10.9.
Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

SCVMM Service (2012) does not start after reboot VMM-Server

VMM-Server: WIN 2008 R2 Standard x64
SQL-Server: 2008 R2 x64
Hi,
after reboot VMM-Server we get the following error messages from the EventViewer when starting the VMM-service:
Event ID: 19999
Virtual Machine Manager (vmmservice:130936) has encountered an error and needed to exit the process. Windows generated an error report with the following parameters:
Event:VMM20
P1(appName):vmmservice
P2(appVersion):3.0.6005.0
P3(assemblyName):Remoting
P4(assemblyVer):3.0.6019.0
P5(methodName):M.V.R.IndigoSerializableObject.BuildKnownAssemblyTypes
P6(exceptionType):S.Reflection.ReflectionTypeLoadException
P7(callstackHash):17ca
and
Event ID: 1
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark)
at System.Reflection.Assembly.GetTypes()
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)-2146232830
Thanks in advance!

You would have to post the same in the XI forums for more relevant answers.
Please close this thread and open a new on in the XI forums or send a mail to
[email protected]
tp have it moved.

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Error message during installation and after reboot. I can't continue with installation.

Error message while installing 10.6.3. And even after reboot I can't do anything anymore same message pops up after a few minutes. How can I get new version installed without error message and it ejecting the Installation Cd? Tried booting from external drive since the one on my Mac is not working. Any tips on how to proceed?

Installing or updating Snow Leopard:
http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf

SSH does not start after reboot

Hi, I have a problem with my sshd daemon. I have updated my OS, I have changed the .pacnew files and tested service with "systemctl start sshd.service" and it worked good. I have run command "systemctl enable sshd.service" and command executed good. But after reboot service does not start.
I have run "systemctl status sshd.service" and result is that service is loaded, but in Activa line it is inactive (dead).
I dont know what is happening, why is it inactive if it is loaded?
Thank you for you help.

These are outputs:
$ systemctl status sshd.service
* sshd.service -OpenSSH Daemon
Loaded: loaded (/usr/lib/systemd/system/ssh.service: enabled)
Active: inactive (dead)
$ systemctl status sshd.socket
* sshd.socket
Loaded: loaded (/usr/lib/systemd/system/ssh.socket: enabled)
Active: active (listening) since Fri 2014-05-30 09:57:52 COT; 12min ago
Listen: [::]:22 (Stream)
Accepted: 0; Connected: 0
It looks that socket is working, but service isn't. I have reviewed "journalctl -b" and sshd service isn't shown it.
Last edited by mams827 (2014-05-30 15:25:18)

CRS not starting after reboot

Hi,
I have just installed RAC in a test environment using vmware server 2. I have Oracle Enterprise Linux 5 and used oracle 11g (11.2.0.1). I have not installed database software yet and just installed oracle grid infrastructure.
When i restart any of the node and issue "crsctl check crs", i see following output.
[root@rac2 ~]# crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
Now, "crs_stat -t" also does not work unless i manually start the crs daemon using "crsd start" command. Why crs daemon is not starting automatic unlike 10g RAC. Is it normal behaviour and what is proper way of making this daemon start automatic.
Salman

I am assuming you are running crsctl check crs immediately after reboot. It takes bit of time for crs to start and you do not have to start it manually. By default crs is started automatically and if for some reason you disabled it, you can enable it by using "crsctl enable crs" .
You can also check the status of individual services by using:
# crsctl check crsd

Lion installer does not start after reboot

When I run the lion installer App, it does its thing, copying files for ~3 minutes,
then reboots the computer.
After the computer reboots, Instead of the expected 'install' phase, I am directly returned to the login screen, exacly as a normal boot, and 'About this mac' confirms I am still running 10.6.8
One of my collegues tried extracting the dmg from the installer app, and turned it into a bootable usb disk
Booting from this produced a grey screen, with the timer animation at the bottom, and a grey barred circle just above center.
After half an hour without any indication of progress or disk activity on this screen, I hard-power-off'd the machine, and powered on, straight back to the normal 10.6.8 login screen.
My mac is an early 2011 13" macbook pro.
Can someone please tell me why lion refuses to install, or how to find out? and how to fix it?
Thank you
Nick.

I just spotted the following in the console:
Install Mac OS X Lion[368] Error loading /Users/nick/Desktop/Install Mac OS X Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage: dlopen(/Users/nick/Desktop/Install Mac OS X Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage, 265): Library not loaded: /usr/lib/libcsfde.dylib
Referenced from: /Users/nick/Desktop/Install Mac OS X Lion.app/Contents/PlugIns/IACoreStorage.IABundle/Contents/MacOS/IACoreStorage
Reason: image not found
Does this mean a file is missing from my installer?

OSX will not start after reboot from single user mode

Hello,
Yesterday my iBook G4 was only starting in BASH mode. I've looked at discussions describing Kernel Panic and have followed the advice posted to the following post:
http://discussions.apple.com/message.jspa?messageID=1553062#1553062
When I reboot I get past the language setup and the boot progress screen/progress bar gets almost complete before going to a continuously stalling/reloading blue screen.
When I try the command:
rm /var/db/.AppleSetupDone
described in one of the responses I get a 'No such file or directory' message
I assume that as when I try:
cd /System/Library/CoreServices/Setup\ Assistant.app/Contents/MacOS
It returns '-rwxr-xr-x 1 root wheel 58912 16 Aug 21:10 Setup Assistant'
it is the file that is missing.
As the discussion thread I was following seemed to go off on a bunch of other tangents (and was completed), I am hoping somebody might have suggestions for my specific problem under this new discussion.

Welcome To  Discussions Kongxyz!
It will help if you first post some background info.
"...only starting in BASH mode."
Explain exactly what was happening, and what the screen displayed.
Exactly which model iBook G4 is it?
What is the Processor speed?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
Which version number of Panther 10.3.x is installed
What peripherals do you have connected? A keyboard, mouse, printer, external drive or modem, router, etc?
What happened between the last time the iBook started successfully, and when it didn't?
Have you made any changes, like upgrading the system, updated or installed any applications or programs, etc?
Have there been any unusual occurences, like freezes, crashes, power outages, etc?
Are you able to startup from the system install disc to run Disk Repair?
Have you run Repair Permissions?
Instructions posted below.
Is the Mac shutdown overnight, or does it run 24/7?
Have you ever run any routine Maintenance procedures?
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
8.When finished, select Quit Disk Utility from the Installer menu.
9.Select Quit Installer from the Installer menu.
10.In the resulting pop-up window, choose restart.
11.After the computer has restarted, you can eject the CD.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP until the only messages reported, are listed here Spurious Permissions Errors Using: 10.3.x, authored by Michael Conniff.
When "Repair Permissions" is complete. Quit "Disk Utility".
ali b

CRS could not start after reboot

I installed oracle 10g R2 RAC on RHEL4 U4 with 2 nodes. It runs fine on 2 nodes (without reboot after installation). But when I rebooted one node, I found that the CRS daemon could not start automatically. The boot menu show "Starting CRS" [OK]. The "init.crs start" command won't init the CRS daemon.
$ ./crs_stat
CRS-0184: Cannot communicate with the CRS daemon.
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA1/RAC/spfileRAC.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA1/RAC/spfileRAC.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
$ /etc/init.d/init.crs start
Startup will be queued to init within 90 seconds.
$ cat /etc/inittab
id:5:initdefault:
# Run xdm in runlevel 5
x:5:respawn:/etc/X11/prefdm -nodaemon
h1:35:respawn:/etc/init.d/init.evmd run >/dev/null 2>&1 </dev/null
h2:35:respawn:/etc/init.d/init.cssd fatal >/dev/null 2>&1 </dev/null
h3:35:respawn:/etc/init.d/init.crsd run >/dev/null 2>&1 </dev/null
$ ls /etc/rc5.d
K01tog-pegasus K35smb K85mdmpd S05openibd S18rpcidmapd S55sshd S96readahead
K02NetworkManager K35vncserver K87auditd S06cpuspeed S19rpcgssd S56rawdevices S97messagebus
K05saslauthd K35winbind K87ipmi S08arptables_jf S19vmware-tools S56xinetd S97rhnsd
K10dc_server K40smartd K89netplugd S08iptables S25netfs S58ntpd S98cups-config-daemon
K10psacct K50ibmasm K90bluetooth S09isdn S26apmd S80sendmail S98haldaemon
K12dc_client K50netdump K94diskdump S10network S26lm_sensors S85gpm S99local
K15httpd K50snmpd K96pcmcia S12syslog S27vasd S90crond
K20nfs K50snmptrapd S00microcode_ctl S13irqbalance S28autofs S90xfs
K24irda K50tux S01sysstat S13portmap S29oracleasm S95anacron
K25squid K73ypbind S04readahead_early S14nfslock S44acpid S95atd
K30spamassassin K74nscd S05kudzu S15mdmonitor S55cups S96init.crs
Do I miss any configuration to initialize the CRSD at boot?
thanks, ezlee

did you run cluster verification utility for node connectivity?
http://docs.oracle.com/cd/E11882_01/rac.112/e16794/cvu.htm#autoId19
also check the logs ad $GRID_HOME/log/<hostname>/...
starting with alert.log, then the ones its referencing

N73 Installer starts after reboot

Similar Messages

Maybe you are looking for