N73 loses settings on turn off after firmware upgr...

I just upgraded my N73's firmware to version 4.0726.2.0.1, which went fine. I then restored the backup from the SIM card. Everything works fine now unless I turn the phone off. When I turn it back on it has forgotten the time and date, which then need resetting. This isn't such an issue, except if i want to use the alarm function i cannot turn the phone off. Any thoughts anyone?

There have been a lot complain on this. To my knowledge, this is concerning on back up battery in your phone (as bios battery in your PC) which may be flat. Or anyone already found it is concerning with FW. Please confirm.
C6-00 with 8GB MicroSD

Similar Messages

My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Yoga display turns off after 1 minute

I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

Screen turns off after a few minutes and needs to be closed then opened

hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
thanks
ross

Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
Cheers,
Daniel

Hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

Does not turn off after a few seconds

My iPhone does not automatically turn off after a few seconds. This new behavior. Is there a setting for this?

Yes, Settings>General>Auto-Lock

My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off. But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.

I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help.

The video on the Camera app seems to turn off after a few min...I am trying to do a 20 min video. What am I doing wrong please?

The camera app has a video feature on it and I tried to do a 20 min video but it seems to turn off after a few minutes. I tried twice with the same results. There is no info under settings or anywhere on time restraints. Does anyone have any suggestions please?

Sasabean-
I do not know if this is related to your problem, but there is a setting on the iPad called "Auto-Lock". Mine is set for 5 minutes. One of the options is Never. See Settings-General-Auto-Lock.
Fred

Why does my Sony Sound bar CT60BT turn off after 15 minutes?

I turn the volume down during the evening and when I do, it automatically turns off after about 15 minutes. Is there a way to change the settings so that it doesnt go into standby mode?

Hi mdalton1284,
Your Sound Bar has an Auto Standby Function.
It will enter standby mode automatically when you do not operate the Sound Bar for about 15 minutes and the Sound Bar is not receiving an input signal but the sound bar is receiving signal from your PS4 going to the TV via HDMI connection.
You may try resetting the Sound Bar.
Follow the steps below.
Use buttons on the remote control for the operation.
Press BASS +, VOL - , and TREBLE + in that order within 3 seconds.
Let us know if you're getting the same result after resetting the device.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Mac air turning off after starting

Mac air turning off after starting

Hello
Did you check the power saver settings?
Push he first slider far to the right up to never so that your Mac Mini never stops.
Also untick the suspend hard drive activity as soon as possible to avoid lag on your Minecraft server.
Best wishes

Show my caller id button turns off after setting att

show my caller id button turns off after setting at&t, any help

Hi, try this method, it works for me on an iphone4 & 4S (iOS7)
make sure you have all apps closed before next steps.
-Go to Settings, Phone, Show My Caller ID. (if button is Greyed Out)
-Pull down Control Centre & Turn On Airplane Mode & return to Show My Caller ID screen.
-Now slide your screen from right to left taking you to another screen, then slide back to your Show My Caller ID screen.
-Now You Can turn ON or OFF your Caller ID Button.
-Lastly slide down you Control Centre again and Turn OFF your Airplane Mode.
Thats it Job done.
Please note, it will now stay in the mode that you have chosen(ON or OFF) even if you respring or reboot your phone. But if you return back to
Show My Caller ID screen, then you SIM Provider will automatically Disable your Caller ID screen BUTTON once again. So just repeat the steps
above and your be fine.
Hope this helps.

Sticky Keys keeps turning off after every restart

the Sticky Keys option in the universal access prefs pane keeps turning off after every restart. how can i fix this?

It seems to be a common problem in the OS that when you restarts some of the settings get reset. For me it happens with the screeen dimming before sleep and the double click using 2 fingers and maybe others that I don't know about. I am hoping that its fixed in 10.4.7 which should be out within a week or so.

Stuck in recovery mode and turns off after 30 seconds

Hi everyone,
I have done my research but no one seems to be having the exact same problem that I have. Here's what happened:
When I was updating the firmware of my Ipod Touch 4g iOS to 4.2 in a MacBook Pro, it suddenly cut the USB power because it was low on battery. After which, my Ipod now only goes from the apple logo to recovery mode (connect to itunes screen)then turns off after about 30seconds.
It still gets recognized in iTunes but it doesn't stay powered on long enough for something to be done (restore, iRecovery, etc.). I have tried doing the DFU to recovery mode, holding the home button when connecting the cable, etc.
I have everything backed up so restoring is not an issue. I just need it to work.
Help!

Not sure if this is the same problem exactly but all of a sudden my phone was stuck in headphone mode & wouldn't make sounds through the speakers at all. This was because of a dirt/dust buildup in the port. What I did was hold the phone & a flashlight in one hand & scraped out the crap with a safety needle/pin thing. This was very useful because I could exactly see where the stuff was & eventually I dug it all out. Works fine now! Hope this helps you/anyone else having a similar problem

Ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

Are you restoring the iPod from a previous back or to factory settings? If you haven't restored to factory settings yet, I would do that next. And if the problem still continues, it's most likely hardware related, in which case you'll want to schedule an appointment at your local Apple Store/Genius Bar to have them take a look at it.
B-rock

My screen darkens after 1 minute and turns off after 3. All of a sudden, now, after the screen shuts down, it comes right back on????

My screen darkens after 1 minute and then turn off after 3 minutes (energy saver). Now, all of a sudden, after it shuts down it comes right on???

thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

N73 loses settings on turn off after firmware upgr...

Similar Messages

Maybe you are looking for