N73 ME firmware 4.0812.4.0.1 - Radio not working

After the upgrade to this version, the radio on the device does not work.
Even after looking for stations on the web that of my area that previously worked and saving them, the radio does not play those frequencies...
Its not that the frequencies may not have worked...
The other radios are catching those frequencies....
Also a bug in the music player:
If a song is playing and you switch the player to the background, later if you get back to it by pressing the menu(long) ,the playing song gets paused !
But if u get back to it using the music key,it does not get paused and works normal !
Try this I think the bug needs to be reported to Nokia !

Hi,
backup your phone & mem.card.
press *#7370# in standby mode to reset your phone.
i hope to solve your problem.
NOKIA means:Night Of King In Alone

Similar Messages

WRT54GS Version 5. Firmware 1.50.9 Apple Computers do not work

Can anyone tell me how to downgrade the firmware in my router. The newest version of the firmware does not work with Apple computers, it works with my windows computers. Apparently this is a known problem with this firmware upgrade.

Unfortunately, the new firmware is only for the WRT54G. You'll find a solution for the WRT54GS here (the short version):
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=16882#M16882
including a source for firmware version 1.50.8 which is what you need for the WRT54GS
If you want the long version, you'll find it here:
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=10007

N73 ME firmware 4.0812.4.0.1 - says unable to inst...

I just got my version upgraded to this one....
Pathetic camera... More of a downgrade !
What is happening now is that when i try to install the applications that were previously installed on my phone,
after about 90% progress in the installer bar, it simply says " unable to Install !"
Now what is this?
Do I need to format my memory card and the phone?
Please I desperately need help !
Solved!
Go to Solution.

Hi,
backup your phone & mem.card.
press *#7370# in standby mode to reset your phone.
i hope to solve your problem.
NOKIA means:Night Of King In Alone

Nokia 5800 swipe to answer not working in firmware...

Hello, I have updated my nokia 5800 xm last week using nokia pc suite. Everything was working fine till last week. Now, whenever I recieve a call, I'm not able to answer the call by sliding the answer option in the screen. I have to unlock the touch screen by using the unlock button and then all the buttons in my touch screen works and then i'm able to answer my call.
someone please help!!!!!!!!!

Done all that for same problem inc Nokia care centre who sent it off because they couldn't fix it and it has come back with reinstalled firmware etc etc but still this does not work!

N73 Firmware 4.0812.4.0.1 Available

N73 Firmware 4.0812.4.0.1 Available
N73 Internet Edition
0539366: Hong Kong IE
0539364: Taiwan IE
N73 Standard
0529813: TAIWAN (Deep Plum)
0529814: HONGKONG (Deep Plum)
0529815: APAC 1 (Deep Plum)
0529816: PHILIPPINES (Deep Plum)
0529817: AUSTRALIA (Deep Plum)
0529819: THAILAND (Deep Plum)
0529820: INDONESIA (Deep Plum)
0529821: INDIA (Deep Plum)
0529824: AUSTRALIA (Mocha Brown)
0529825: APAC 1 (Mocha Brown)
0529828: THAILAND (Mocha Brown)
0529829: INDONESIA (Mocha Brown)
0529830: INDIA (Mocha Brown)
0529831: PHILIPPINES (Mocha Brown)
0529833: HONGKONG (Met Red)
0529834: TAIWAN (Met Red)
From Nokia Software Update Check tool
http://europe.nokia.com/A4577224#
Latest available software for Nokia N73, product code 0529824
Version: 4.0812.4.0.1
Solved!
Go to Solution.

the difference in this new firmware..
- i see Music Player is renamed Mus. Plyr. .. weird, it's like they want to keep things short.. haha..
- and also, you cant rename your memory card longer than 5 letters ..
- the fonts are smaller, and you can see it's jagged...
- ram improved from last firmware ; i get 19mb every startup of my phone.. but the memory leakage still there..
- and also, this is new i think... but for normal n73, you wont have the music player automatically load each time you start your phone.. this feature only with n73me ..
- but the multimedia key is maintain as normal n73, which i like.. there you can customized the multimedia shortcuts and functions...
- last... no updates for flash player and nokia maps...

Where is my n73 new firmware update

i heard that new firmware for n73 was released from nokia (V4.0723.2.0.1/06.06.07)and i tried to update my n73 firmware, but my NSU keep telling me that i already install latest firmware and i check on my phone, but that too disappointed that my n73 still not up to date (V3.0704.1.0.1). I want my n73 firmware to be update. It's not fair to users like me.
I hope nokia will overcome this problem.. I want my n73 firmware to be update.

Hi rouin - Although Nokia has released an updated firmware for the N73, it will only be for a certain product codes (you can find your product code under your battery compartment).
If you received your phone as part of a contract then your phone will be tied in to that network operator - e.g. Vodafone, Orange and so on. If this is the case then you will have to wait until they authorise the release of the firmware for the N73 - there's no way around this unfortunately.
You can see this post for more information :
/discussions/board/message?board.id=swupdate&message.id=451
Regards,
Edward

N73 ME not working in Network Mode GSM and Dual Mo...

Dear All,
I have N73 ME.
Firmware: V 4.0812.4.2.1
I am using Vodafone Line and I am living in egypt.
I have a problem with the network of the device. The device is working fine only with the Network Mode UMTS, but not working with GSM and Dual Mode, which makes it doesnot have network signal in many areas, while I have another Nokia 5200 phone whick works fine in these areas.
Is it a Software or Hardware problem?
and what is the solution for it?
Thanks in advance for your help.

moderator note:
please be informed that your personal and contact information, as well as the IMEI of your phone are not allowed to be posted in this board for security and privacy reasons.
thanks.

GPS not working with fw V4.0723.2.0.1 on N73

I upgradet my N73 to latest firmware and since then I can not use my GPS receiver any longer. It connects via bluetooth to the GPS receiver but the NMEA are not transfered.
I think that the problem is with the baud rates. Otherwise the bluetooth is working fine.
PLEASE HELP me to solv this problem, because the use of nav software is the nr1 reason why I have this phone.
Thanks in advance

to --> genesis
nokia have got so many complaints regarding to the N80 Firmware V 4.0707.0.7 & that was a BETA firmware so the Nokia Team would have to do less work by launching it to the public n then creating a new firmware fixing da problems.
Also I can back my theory up. for example I have a Flashing Box n access to the latest firmware before it is even released on NSU so therefore wen the N80 4.0707.0.7 firmware was released on NSU i could not get hold of it before it was added to NSU same wid this new N73 firmware...
Coz Nokia dont give Flashing Company access to BETA firmwares...so therefore they can not upload to the website for downloading,,,
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

N73 sometimes mic not working

I have a Nokia N73 and I'm very pleased with it. But sometimes I have a problem that my mic is not working. So people on the otherside cannot hear me. I have to reboot my phone in order for it to work again.
This smells like a firmware bug, because the problem can be solved by a reboot.
Someone any ideas?

Remote on handsfree? Do mean the control of the headphone, be it wired or bluetooth?
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Strange boot bug; open firmware not working

Hi!
I have a powerbook Alu 15", 1.5Ghz. It runs OS X 10.4.2 with the latest security update. My problem started last Saturday.
The problem is that my pb will not restart nor boot on its own. The computer makes its usual chime, the hard-disk starts to spin for a few second, and then stops suddenly before anything is displayed on the screen (the display does not even light-up). If I press the option key after or before the chime, and keep it pressed, or the shift key, or the c key, or the t key, or the command-option-p-r key combination, or even the command-option-o-f key combination, the behavior is exactly the same: the disk starts to spin for a few second after the chime, and suddenly halts. The computer appears to shutdown on its own before the boot can even start.
Here is the strange part: the computer boots normally if I press the command key (this key on its own is not suppose to do anything). It also works if I press the command-s or command-v key combination. No other key combination seem to work.
Except for this strange boot behavior, the computer works flawlessly. I did not have any kernel panic for at least a year, the computer did not crash recently, everything works fine except for one small detail on which I will come back at the end.
I've tried to fix the problem by the following actions:
1) Clean install of Tiger with a new partitioning of the disk; I even zeroed the entire disk. This did not change anything so the problem is probably not OS related.
2) Reset of the PMU with the four finger salute: shift-control-option-power combination. No effect except that I lost the date/time information. Hence the reset worked.
3) Tried to reset the PRAM, but the command-option-p-r key combination does not seem to work.
4) Tried to load the open firmware with command-option-o-f, but this does not work either.
5) Memory seems ok. I have 1x256M of Apple RAM + 1x1G of RAM bought from OWC. I've had the OWC RAM for about a year without any problem. Anyway, I removed the 1G module and tried to boot on the 256M Apple module alone. Exact same behavior. Then I removed the Apple module and put back the 1G module. Exact same boot behavior. So the problem is not with my RAM, unless both modules have simultaneously developed a malfunction.
6) Tried to run the Apple hardware tests. However, for my machine, these tests come on the install DVD, in a special hidden volume. To boot on this special volume, one needs to boot with the option key depressed, and to select the boot volume from the open firmware interface. But this does not work on my machine, the computer seems to shut down before this interface can be activated!
So this problem is very strange. I can live with having to press the command key for booting my machine, but I would sure like to know what is going on here. Is the problem hardware related? Perhaps, but as I said, the machine works flawlessly except for the strange boot behavior.
Is the problem related to firmware? I think that this is the most probable option. What do you think? Maybe, the firmware got slightly corrupted? Maybe a bit got flipped in the flash memory? Is this possible? I guess so. But, what can I do? Should I contact my friendly local repairman?! I have to admit that this option scares me a little bit for such a strange problem. I would need an Apple engineer with boot related experience/expertise!
Now, here is a little bit of further information. I don't know if its related, but it is also very strange. I work with a dual screen configuration. Usually, I connect my screen and then I wake up the computer. Last week, I noticed that if I connect my second screen live, the system detects it automatically. I guess this is new to Tiger? Anyway, the strange behavior is that the computer then asks me if I want to sleep, restart or shutdown my pb, as if I had pressed the power button. But I did not press this button when I connected the dvi connector >:-o
Many thank

Hi Scott!
Almost every time the PowerBook woke after sleep, I got the 'Are you sure you want to shut down your computer now...' message.
I get this message upon wake only rarely, but every time I plug or unplug a display live.
The strange behaviour was tolerable, so I've lived with it for several months. But then when checking out the PowerBook discussions, I read about the failing lower RAM slot problems, and just out of interest, checked out my System Profiler....
Ok, so the good news is that my pb may continue to work for several months
My lower RAM slot appears to be ok for now.
Interestingly, I'm sure that the start-up problems began when I started using my PowerBook with a 23" Apple Cinema Display (a pink hued one, but that's another on-going saga) - and you too have mentioned that you use an external display, so I wonder if that's part of the cause of our start-up problems.
Yes, I've noticed the 'Are you sure you want to shut down your computer now...' message just a few days before noticing the strange boot problem (not sure if the machine booted in between). I use ViewSonic displays (one at home and one at the office), and several different projectors in different class rooms. From what I read, it is plausible that there is a link between this problem and the dvi port. Could it be that the boot sequence of mb is affected by a hardware problem on the dvi port? But not when a press the command key?!
Anyway, my machine is no longer under warranty, so I intend to live with the problem for as long as possible...
But I've been doing more regular backups since then.
Best wishes to you and your (almost) new machine!
Marc.

Problem with Nokia N73 -- Camera is not working

Recently i have purched Nokia N73.
Some times my camera is not working ,means it's stuck.
but after some time or after a day it's working fine.
what is the reason ?
is there any setting?
Plz let me know the same.
Wating for your positive reply ASAP.

try to upgrade your software
see this link-> http://europe.nokia.com/softwareupdate

After updating my MBP to firmware 1.1 my internet does not work anymore

Please help,
A couple of days ago my MBP asked me if I wanted to update to Firmware 1.1 and I did. I followed the steps like it said and when I restarted it my internet was not working anymore. I called my internet provider and they tried helping me but no luck.They gave me the codes and I tried to set up the PPP address and other codes.
I am using a DSL cable and a Ethernet connection.
Does anyone know how I could solve this?
Thanks!

Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.

External hard drive is not working on airport time capsule even after 7.7.2 firmware update.
I have the latest Airpor Time capsule 2gb. I specifically bought it so that I could have an external hardrive set up to wirelessly house my itunes library and movies. When i connect the drive, all i get is that the disk needs to be repaired.
the drive can works fine when connected to the macbook pro and I have run the verify and repair features in disk utility. I have also reset the airport timecapsule as well following these changes and still no change.
The 7.7.2 update says that it addressed the usb issue of not showing the drives but there are still problems as I cannot get it to appear.
Please help.
Thanks

How is the hard drive formatted?
Have you tried using a powered USB hub with the drive when it is connected to the Time Capsule?
(The USB port on the Time Capsule is borderline as far as power is concerned....you may need to use a powered hub.....even if the hard drive has its own power supply)
If the drive is formatted correctly....and....it has ample power, it will "show up" when you open AirPort Utility, click Edit, then click the Disks tab at the top of the next window.
In the example below, my Time Capsule drive is named "Backups" and another drive named "WD Drive" is connected to the USB port on the Time Capsule.
You should see the name of your Time Capsule drive (named "Data" unless you have changed the name) and the name of the USB drive if you perform the same check.
What do you see?

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?"

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

Hello buddyacw
You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G.

N73 ME firmware 4.0812.4.0.1 - Radio not working

Similar Messages

Maybe you are looking for