N73 ME setting an MP3 file for sms alert tone

how can we set an mp3 or mid or other music format for sms alert tone?
Nokia N79 4GB
SW Version: 32.001 RM-348 MEA

04-Apr-200709:33 PM
petrib wrote:
Put your MP3s, MIDI files, etc., in \Nokia\Sounds\Digital in phone memory or \Sounds\Digital on a memory card (or the microdrive on the N91).
If that fails, go to the file manager, select the mp3 file and under options select 'set as ring tone'

Similar Messages

  • Using WMP10 to shrink MP3 files for Nano P

    I have a new Nano Plus and have decided to copy some music to it shrinking the MP3 and WMA files down to 64KBS WMA to save some space. I have used both Zen Nano Explorer and WMP0 to do this. I noticed something with the WMP0 files--some of them are horribly distorted. I am not a picky listener, but these are so bad I deleted all of them. I re-did them using the shrink function built in to Nano Plus Explorer and the resulting files sound fine. The ones I noticed in WMP0 that were REALLY bad started out as high bitrate VBR MP3 files. I suspect this has something to do with it. THe Creative Software, however, was just as fast and did a MUCH better job. The downside of the Creative software, in this case, is it shrinks a file, puts it on the Nano, then if you lose that file on the Nano for some reason you have to shrink another (taking much longer on the file transfer). WMP0 keeps a copy of your shrunken file for re-use. I upgraded my firmware already on the Nano and it erased everything---this is how I found out I had to re-do the whole thing. Since then, I made a backup folder for the whole Nano and put it on my computer. I am not sure about changing the battery and what might happen (thinking this is flash memory, so it should be fine).
    Anyhow, just passing this along as my first really bad experience using WMP0. WMP0 did a fine job of anything that was a high-bitrate WMA file, it was just the MP3 it choked on.

    Instead of dragging and dropping the .mp3 files to your iWeb page (and making them into QT movies), you could just make links on your page either graphics or text and the use the Inspector hyperlink tab to attach the .mp3 files for download.

  • How do I set the default time for calendar alerts?

    How do I set the default time for calendar alerts? I always want to have an alert 15 minutes before my appointments. I don't want to have to manually set it each time I make an appointment (I just moved to iphone from a windows mobile where this was basic stuff so I apologise if this is a noob question).

    I have the same issue. I've searched these forums and found lots of people who have asked this same question, but nobody who has received an answer.
    About a year ago, I migrated from a Windows PC and a Blackberry (both of which had very simple default alert options) to a MacBook Pro and an iPhone and have yet to find a solution on this forum or from any of my Apple-savvy friends. Very discouraging.

  • In my iph 4S SMS alert tones keep stammering

    In my iph 4S SMS alert tones keep stammering

    Hi,
    FYI, every tone will ring soft to loud meaning the volume will climb up every second. This is to avoid daze when using it in public places.

  • How can I set a default file for JFileChooser

    Hi. I am developing a p2p chat application and I have to unrelated questions.
    1. How can I set a default file name for JFileChooser, to save a completly new file?
    2. I have a JTextArea that I append recieved messages. But when a message is appended, the whole desktop screen refreshes. How can I prevent that?
    Hope I was clear. Thanks in advance.

    Thank you for the first answer, it solved my problem. Here is the code for 2nd question, I've trimmed it a lot, hope I didn't cut off any critical code
    public class ConversationWindow extends JFrame implements KeyListener,MessageArrivedListener,ActionListener,IOnlineUsrComp{
         private TextArea incomingArea;
         private Conversation conversation;
         private JTextField outgoingField;
         private JScrollPane incomingTextScroller;
         private String userName;
         private JButton inviteButton;
         private JButton sendFileButton;
         private JFileChooser fileChooser;
         private FontMetrics fontMetrics;
         private HashMap<String, String> onlineUserMap;
         public void MessageArrived(MessageArrivedEvent e) {
              showMessage(e.getArrivedMessage());
         public ConversationWindow(Conversation conversation)
              this.conversation=conversation;
              userName=User.getInstance().getUserName();
              sendFileButton=new JButton("Dosya G�nder");
              sendFileButton.addActionListener(this);
              inviteButton=new JButton("Davet et");
              inviteButton.addActionListener(this);
              incomingArea=new TextArea();
              incomingArea.setEditable(false);
              incomingArea.setFont(new Font("Verdana",Font.PLAIN,12));
              fontMetrics =incomingArea.getFontMetrics(incomingArea.getFont());
              incomingArea.setPreferredSize(new Dimension(300,300));
              outgoingField=new JTextField();
              outgoingField.addKeyListener(this);
              incomingTextScroller=new JScrollPane(incomingArea);          
              JPanel panel=new JPanel();
              panel.setLayout(new BoxLayout(panel,BoxLayout.PAGE_AXIS));
              panel.add(inviteButton);
              panel.add(sendFileButton);
              panel.add(incomingTextScroller);
              panel.add(outgoingField);
              add(panel);
              pack();
              setTitle("Ki&#351;iler:");
              setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
              setLocationRelativeTo(null);
              addWindowListener(new CloseAdapter());
         //Sends the message to other end
         public void keyPressed(KeyEvent e) {
              if(e.getKeyCode()==KeyEvent.VK_ENTER && e.getSource()==outgoingField)
                   String message=outgoingField.getText();
                   if(message.equals("")) return;
                   showMessage(userName+": "+message);
                   conversation.sendMessages(userName+": "+message);
                   outgoingField.setText("");     
         //Displays the recieved message
         public void showMessage(String message)
              if(fontMetrics.stringWidth(message)>incomingArea.getWidth())
                   int mid=message.length()/2;
                   StringBuilder sbld=new StringBuilder(message);
                   for(;mid<message.length();mid++)
                        if(message.charAt(mid)==' ')
                             sbld.setCharAt(mid, '\n');
                             message=sbld.toString();
                             break;
              incomingArea.append("\n"+message);
    }

  • Two problems with MP3 files for interactive PDFs

    1. I'm putting in two interview excerpts for an interactive pdf. Last week when I tried to import the first MP3, I got the "cannot place this file. No filter found for requested operation" error message. I don't know anything about sound files, so I just tried To MP3 from the App store, which converted my MP3 file to another MP3 file, I guess. The new file worked fine.
    I got the second file today and had the same problem. I sent the following urls (http://indesignsecrets.com/forum/general-indesign-topics/how-to-place-an-mp3-file-into-ind esign-cs5-which-was-edited-with-audacity-and-converted-with-switch, http://indesignsecrets.com/forum/general-indesign-topics/no-filter-found-for-requested-ope ration-mp3) I found that seem to describe similar problems to our sound guy at work.He tried lowering the bit rate, but it didn't do any good. So when I got home, I tried To MP3, and it solved the problem again.
    Does anybody know why this is happening?
    2. Once I had the first sound file in place, I wanted to replace the small gray box that Acrobat puts in. Bob Levine suggested
    http://indesignsecrets.com/hiding-sound-files-in-an-interactive-pdf.php
    which worked great, but I needed some way to control the audio. I tried a variation of Steven Werner's suggestions in
    http://indesignsecrets.com/hiding-sound-files-in-an-interactive-pdf.php
    It was working fine, when I had just a play and pause button, but when I added a resume, the play button just stopped working. I tried all sorts of variations, getting rid of the double actions in the buttons, starting new files, new buttons, but the play button just didn't work. In my last test, the play button worked, but only after I had pressed resume. So I am completely stumped.
    Any suggestions would be welcome. Thanks.
    I'm using InDesign 7.0.4, Mac OSX 10.6.8
    Chris

    OK, I should have thought more  before I answered.
    So I see that Media Encounter does import audio files but it only exports video. However, I did a test with making a video file from the MP3, importing that video into InDesign, reducing the video, using the multi-function buttons, and everything worked fine. I got the warning message that the "interactive elements are clipped in ways that PDF files cannot reproduce" but it didn't interfere with playing it back. Still, I feel as if I'm cheating and something is going to come back and haunt me.
    The disadvantage is that the video files are larger than the audio.
    Chris

  • Using CS4 - in the past PS set up a file for images saved for "web

    I am using PS and Dreamweaver CS4. In the past, when saving an image for "web and devices", PS set up a separate file for saved images which then showed up in Dreamweaver. I have somehow lost PS in Dreamweaver. Instead, Photoshop puts the saved image back into the original file.PS is grayed out in Dreamweaver so cannot connect back to any images from Dreamweaver either. How do I get back to preferences I originally set up for saving images for web and devices. I have Windows XP Professional.

    Save For Web is an Export, not a Save. That distinction means it saves out a copy, leaving the original as it was. The export destination is set in the SFW dialog, and is sticky. The next time it exports to the same location unless you change it again.
    So you just need to point Dreamweaver to where your SFW exports go. That's all.
    (Disclaimer - I don't use DW, but I assume it works like any other software).

  • Set DAQ default file for DAQmx

    Is it possible to load a DAQmx file (*.nce) on MAX programmaticaly in
    LabView 7? I know it's work for tradionnal DAQ file (*.daq) with "Set
    DAQ default file.vi" but this vi don't work for DAQmx file.

    Hello FrankyD,
    Thank you for contacting National Instruments.
    It is possible to programmatically load a DAQmx file, but not with a
    single VI. You will have to:
    1 - Programmatically open MAX
    2 - Move the window to the front
    3 - Then simulate the necessary keystrokes to navigate to the import
    window.
    I have attached an example VI to help you get started. Currently, the
    VI will work as long as there are no symbols (: \ / ) in the file path
    string. To input symbols, you will have to map the correct code to
    the Simulate Keyboard VI. The ASCII codes for keys can be found at:
    http://msdn.microsoft.com/library/default.asp?url=/library/en-us/winui/WinUI/WindowsUserInterface/UserInput/VirtualKeyCodes.asp
    You will have to convert the ASCII to U8 number before
    you can send it
    to the Simulate Keyboard VI.
    I hope this helps,
    Sean C.
    Applications Engineer
    National Instruments
    Attachments:
    Import_MAX.zip ‏171 KB

  • How set auto growth file for 500 GB Database

    Hi
    We have 500 GB database every day its grow by 18 GB.
    can you please advice me how Can I set auto growth file in MB or percentages?
    Thanks in advance.

    How to set it - Check this link -
    https://www.simple-talk.com/sql/database-administration/sql-server-database-growth-and-autogrowth-settings/
    First - Never rely on Autogrowth for growing the file sizes. This has to be a manual process where you increase the size depending on the growth before hand. Autogrowth should only be relied on for last case/unfortunate scenarios
    Second - Dont set Autogrowth in Percentages . Always set it in MB's.
    You cant start with say 500 MB and monitor. You need to set this in such a way that increasing this amount does not take up too much time and cause slowness.
    Check if you have Instant File Initialization enabled - This will reduce the time taken for initializing DATA files considerably. Check this link -
    http://blogs.msdn.com/b/sql_pfe_blog/archive/2009/12/23/how-and-why-to-enable-instant-file-initialization.aspx
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • How to set an mp3 file as ringtone on iphone4s?

    just got a new iphone 4s and wondering how to make an mp3 file as a ringtone..i have followed some steps shown on some other forums but im still stocked on default ringtones...i have successfully converted an mp3 file to m4r file and synced to my iphone but it didnt show up on my sound settings..can anybody help me find out what to do.please thanks...

    Have you had a look here
    iphone ringtone - CNET

  • Making mp3 files for Acrobat 9

    You can only embed mp3 files into
    Acorbat 9 files.  I want to addf my voice with microphone.  Windows only make wma files or wav files.
    How can I make mp3 files?
    Trudie

    Trudie,
    Pehaps the simplest approach would be to obtain a conversion utility.
    A search engine query ought to return a plethora of possibilities
    Be well...

  • Still no update to SMS alert tones!!!!  Why?

    I really cant understand why Apple seem to refuse to allow the customisation of the message alert tones. Dispite what must have been numerous requests to do so since its launch.
    And now we have the iPhone 4, the new iPhone to compete as one, if not the, best smartphone in the world..
    Yet we still cant do what I know a lot of us want.
    The only reason I really bothered to JB my iPhones was because I could customise the alerts and create themes.
    I really dont want to JB this version but still Apple insists on making this a no option. I know guys say its not top of their list but blimey this has been a basic requirement for most guys since the beginning. Not even an App not that I think one could be created given the principal involved in access core software.
    But really why couldnt Apple do this small thing??
    Instead of sitting in a public place hearing one of those generic tones and watching a good few people all check their phone including me!!!
    I am only left with the silent option which really in this day and age isnt a great feature of a £500 phone!!

    agree! fully... i could do this with my phone in the 90's! the fregin 90's!

  • Screen resolution to set up photoshop file for edge reflow

    hi :
    i'm learning responsive design along with edge reflow. I'm designing a web site that works responsively for all devices. I'm starting with a psd layout.  I set up my photoshop at of 960x1136 currently. 
    my edge reflow breaking point for mobile is 768px currently. Perhaps i should modify my psd file to 768 width as well. but before i do that i have the following problem to resolve. When i view this on my iphone thru edge inpect. it's displaying a width of prob. 320 viewport width. which makes all the fonts and images look too big and of course the layouts are in disarray b/c there isn't a corresponding layout for that view port size.
    i understand the difference btw viewport size and screen size. But   I'm confused re: the size to set up my photoshop file.
    should i have set up my photoshop file based on "viewport " size rather than screen density?? (ie. 320x480 viewport for the smaller iphone rather than 640x960 which is the actual screen pixels) and create high res images separately for retina displays??
    what i'd like to have is to have corresponding font sizes and box sizes btw the edge flow file and photoshop psd. so if pick 1.5 em font  in edge reflow, the same font in photoshop file is also 1.5 em. and perhaps saving images as smart object so the images can have higher resolution?
    please advice.
    thx
    grace

    Maybe I'm wrong, but the best option would be to work with percentages, not pixels.
    You can see examples in this Adobe links:
    CSS Percentage vs. Pixels - Re: How can convert the em,px,pt and % in css - CSS Width percentage layout issues - Re: DW CC Fluid grid layout how to change px width for desktop layout
    I hope it has been helpful
    sorry, I forgot this link in Adobe site: Ten things you need to know about responsive design | Adobe Developer Connection
    See you,
    Masters and MBA

  • Converting a wma file (windows media audio) to a Mp3 file for iTunes.

    I copied all of my music from my external harddrive that i have had for a long time now onto my MacBook. Some of the files were wma while most were Mp3. is there anyway that i can convert the files on my mac to make them mp3 and playable on my itunes and put on my nano. I have tried many times to add the songs to my library and then convert them, but they don't appear in my library but they still play when i use quicktime.

    The files play in Quicktime likely because you have the Flip4Mac plugin installed. As for iTunes, it doesn't support WMA files, so they won't be imported.
    You can try EasyWMA to convert the WMA files to MP3, M4A, or WAV. I have not tried this program, though.
    Hope this helps,
    -Ryan

  • Hyperlink to mp3 file for download

    Hello,
    I'm trying to add a hyperlink to my page so people can download my audio files. I put the files in my public folder on idisk and hyperlinked it, but when it is clicked, it just plays the song instead of downloading it.
    Any suggestions?
    Thanks,
    Jimmy

    That's usually the case.
    Tell 'em to either Control-click/Right-Click, then +Save as+, or, in Safari, to Alt-Click to download.
    Other solution: make a zip archive of the file. Then it will download automatically (hopefully).
    Next they have to figure out what was downloaded. They should have a upzip application. A what?
    In short, it actually depends on the visitor whether or not he is able to command his browser.
    Supply the manual too.

Maybe you are looking for