N73 message icon stuck on

Does anyone know of a fix to remove the message icon. Also everytime the phone is turned on l get a message telling mr that l have a new voice mail on line one. Have talked to orange many times they cannot fix it, claiming this to be a known problem with this set. But also claim there is a fix available from Nokia. Any idea's?????

Hi monkey82
Have you seen this post by james_marshall?
/discussions/board/message?board.id=communicators&message.id=15077#M15077
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • How can I get my instant message icon to open? Seems to be stuck.

    I wrote several instant messages this morning on my AirMac. No problem. Went back to read and respond to new IM, but IM icon will not open. If the IM comes in when I am on the computer, I can read it in the upper right hand corner of my MacBook Air before it goes away, but I cannot respond. Can anyone tell me how to open the Instant Message icon?

    Try clicking on the apple symbol at the top left of the screen and chosing "Force Quit" and then close IM.
    Once its closed it should reopen without a problem

  • Messaging Icon Gone- Stuck In Productiviy Icon HELP

    As the title says, my messaging icon suddenyl dissapeared, and I finally found it hiding in the productivity icon. How do I get my messaging icon back on the home screen and out of where it is now?

    Drag it out.
    Have a look at the manual. It explains folders and moving icons:
    http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
    Hold an icon until they all wiggle then drag it out.

  • While using gmail a message appears asking to Increase Database Size? No message is stuck on my screen.  Why?

    While using gmail on my ipad a message appears "Increase Database Size?".  After pressing cancel the message is stuck on my screen. 
    How do I get rid of the message so I can access my mail?

    Here's a fix just in case other users have this problem and still sticks around:
    In your passbook app- choose the Belly "Card." Tap the "i" icon on the bottom right corner and turn off the notification sliders. Passbook seems to go over the general notifications and just makes it's own rules in this regard.

  • Play Icon Stuck Next to Battery Icon?

    I can't really complain about yesterday's update. I LOVE the iPod controls and iTunes Wifi. My only question is, does anyone else have the iPod play icon stuck next to their battery icon? Mine doesn't go away even when I'm not listening to music. When I pause (and essentially stop listening to music) it might show the pause icon for a little while but if I go into another application or put my baby into sleep mode then wake it up... the play icon is back.

    Ok. This happened to me a couple of times when I first got my iPhone back in July (so not sure it has to do with the recent update).
    My question I guess is when you get out of the ipod application, do you just hit the home button to get out?
    I ask because I found if I did that, not only did I have the "play" button still show up, but the name of the song appeared on the home menu.
    What I learned to do was when exiting the ipod app, I first paused the song, then backed out of it by way of the arrow on the upper left hand corner, then I would press the home button for about 6-8 seconds taking me to the home screen. I have not had that problem ever since.
    It's worth a shot for you all.
    Hope this helps!
    iPhoNettie
    Message was edited by: iPhoNettie

  • A clean install on my MacBook Pro has left my icons stuck on the right side of the desktop. I want to move them but there is no 'None' option which I think would free them to move where I wish. Suggestions?

    A clean install on my MacBook Pro has left me with my icons stuck in the grid on the right side of my desktop. I had the ability to move them and have them stay put in various sectors of the desktop, which I found very useful.  The clean install upgraded the OS to 10.6.8 from 10.5.8. I want to move them again but there I see no 'None' option which I think would free them to move where I wish. Has the upgrade deleted that option? Suggestions? I am new to this community and if not new to Mac, I often feel that way. This is one of those times.
    Julz11 in NYC

    I have the same problem on the latest iTunes software and Windows 7. My window is maximzed and I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was there - at least before the very big change to the interface.

  • When I try compose an email, just get compose window icon stuck in windows taskbar can't actually enlarge it and use it

    Ok, details of installation below, so when I try compose an email, I just get a compose window icon stuck in the windows
    taskbar can't actually enlarge it and use it. If I restart in safe mode with all addons disabled, then it works fine. But
    If I restart normally and manually disable addons/plugins, then close and start normally again i.e not safe mode, it
    breaks, so does not seem to be an addon or plugin but rather something with the configuration.
    Application Basics
    Name Thunderbird
    Version 31.6.0
    User Agent Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
    Profile Folder
    Show Folder
    (Local drive)
    Application Build ID 20150330093429
    Enabled Plugins about:plugins
    Build Configuration about:buildconfig
    Memory Use about:memory
    Mail and News Accounts
    ID Incoming server Outgoing servers
    Name Connection security Authentication method Name Connection security Authentication method Default?
    account2 (none) Local Folders plain passwordCleartext
    account3 (nntp) news.mozilla.org:119 plain passwordCleartext stbeehive.oracle.com:465 SSL passwordCleartext true
    account5 (imap) stbeehive.oracle.com:993 SSL passwordCleartext stbeehive.oracle.com:465 SSL passwordCleartext true
    Crash Reports
    Report ID Submitted
    bp-0a8986d2-ff0c-41c3-9da6-e770e2141224 24/12/2014
    bp-01f44ba7-3143-4452-ac98-981b62140123 23/01/2014
    Extensions
    Name Version Enabled ID
    British English Dictionary 1.19.1 false [email protected]
    Lightning 3.3.3 false {e2fda1a4-762b-4020-b5ad-a41df1933103}
    Oracle Beehive Extensions for Thunderbird (OracleInternal) 1.0.0.5 false [email protected]
    Important Modified Preferences
    Name Value
    accessibility.typeaheadfind.flashBar 0
    browser.cache.disk.capacity 358400
    browser.cache.disk.smart_size_cached_value 358400
    browser.cache.disk.smart_size.first_run false
    browser.cache.disk.smart_size.use_old_max false
    extensions.lastAppVersion 31.6.0
    font.internaluseonly.changed false
    font.name.monospace.el Consolas
    font.name.monospace.tr Consolas
    font.name.monospace.x-baltic Consolas
    font.name.monospace.x-central-euro Consolas
    font.name.monospace.x-cyrillic Consolas
    font.name.monospace.x-unicode Consolas
    font.name.monospace.x-western Consolas
    font.name.sans-serif.el Calibri
    font.name.sans-serif.tr Calibri
    font.name.sans-serif.x-baltic Calibri
    font.name.sans-serif.x-central-euro Calibri
    font.name.sans-serif.x-cyrillic Calibri
    font.name.sans-serif.x-unicode Calibri
    font.name.sans-serif.x-western Calibri
    font.name.serif.el Cambria
    font.name.serif.tr Cambria
    font.name.serif.x-baltic Cambria
    font.name.serif.x-central-euro Cambria
    font.name.serif.x-cyrillic Cambria
    font.name.serif.x-unicode Cambria
    font.name.serif.x-western Cambria
    font.size.fixed.el 14
    font.size.fixed.tr 14
    font.size.fixed.x-baltic 14
    font.size.fixed.x-central-euro 14
    font.size.fixed.x-cyrillic 14
    font.size.fixed.x-unicode 14
    font.size.fixed.x-western 14
    font.size.variable.el 17
    font.size.variable.tr 17
    font.size.variable.x-baltic 17
    font.size.variable.x-central-euro 17
    font.size.variable.x-cyrillic 17
    font.size.variable.x-unicode 17
    font.size.variable.x-western 17
    gfx.blacklist.suggested-driver-version 257.21
    mail.openMessageBehavior.version 1
    mail.winsearch.firstRunDone true
    mailnews.database.global.datastore.id 8d997817-eec1-4f16-aa36-008d5baeb30
    mailnews.database.global.indexer.enabled false
    network.cookie.prefsMigrated true
    network.tcp.sendbuffer 65536
    places.database.lastMaintenance 1429004341
    places.history.expiration.transient_current_max_pages 78789
    plugin.disable_full_page_plugin_for_types application/pdf
    plugin.importedState true
    plugin.state.flash 0
    plugin.state.java 0
    plugin.state.np32dsw 0
    plugin.state.npatgpc 0
    plugin.state.npctrl 0
    plugin.state.npdeployjava 0
    plugin.state.npfoxitreaderplugin 0
    plugin.state.npgeplugin 0
    plugin.state.npgoogleupdate 0
    plugin.state.npitunes 0
    plugin.state.npoff 0
    plugin.state.npqtplugin 0
    plugin.state.nprlsecurepluginlayer 0
    plugin.state.npunity3d 0
    plugin.state.npwatweb 0
    plugin.state.npwlpg 0
    plugins.update.notifyUser true
    Graphics
    Adapter Description NVIDIA Quadro FX 580
    Vendor ID 0x10de
    Device ID 0x0659
    Adapter RAM 512
    Adapter Drivers nvd3dum nvwgf2um,nvwgf2um
    Driver Version 8.15.11.9038
    Driver Date 7-14-2009
    Direct2D Enabled Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
    DirectWrite Enabled false (6.2.9200.16571)
    ClearType Parameters Gamma: 2200 Pixel Structure: R
    WebGL Renderer Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
    GPU Accelerated Windows 0. Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
    AzureCanvasBackend skia
    AzureSkiaAccelerated 0
    AzureFallbackCanvasBackend cairo
    AzureContentBackend cairo
    JavaScript
    Incremental GC 1
    Accessibility
    Activated 0
    Prevent Accessibility 0
    Library Versions
    Expected minimum version Version in use
    NSPR 4.10.6 4.10.6
    NSS 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
    NSS Util 3.16.2.3 3.16.2.3
    NSS SSL 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
    NSS S/MIME 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC

    Noticed this in the info supplied:
    Graphics Adapter Description NVIDIA Quadro FX 580
    Vendor ID 0x10de
    Device ID 0x0659
    Adapter RAM 512
    Adapter Drivers nvd3dum nvwgf2um,nvwgf2um
    Driver Version 8.15.11.9038
    Driver Date 7-14-2009
    Direct2D Enabled Blocked for your graphics driver version.
    Try updating your graphics driver to version 257.21 or newer.
    Could you update your graphics driver and retest.

  • No message-icon after update

    Hello! 
    Updated my z1 yesterday and now I have a problem to see if I have received a message or not when I've "locked" the screen... There's no message-icon on the top of the screen as it was before update.
    This means I have to enter my phone password everytime to see if I have received messages....
    Any tips to get this back? Annoying to log on every second to see if I got a message or not..
    Thank you.

    Have you recently updated to 4.4?Have you tried a forced restart(power button+vol up until the phone vibrates)?
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • The message icon is not showing in the drop screen of my photos it used to show before and now it's not there how can I get it back?

    The message icon is not showing in the drop screen of my photos where it says do you want to email, message, assign, use as waller paper etc. it used to show before and now it's not there how can I get it back?

    Did this back along to mine. Plug it into itunes on your pc (or Mac) and click on the ipod icon on the left hand side. When the device options come up on the main screen, click on restore. Follow the steps and it should restore to factory settings. If you had icloud activated on the ipod all previous purchases should be in the cloud and ready to download onto the ipod afte rit has been restored to factory settings, otherwise you'll have to download them all again. Hope it helped.

  • Messages icon indicates that there is an unopened message but when i go into it the message is blank and no option to delete it. Any ideas how i can get rid of this and stop it from opening up in the blank message each time i open my messages?

    The message icon on my iphone indicates that there is an unopened text message, but when i go into it, it just opens up a blank message, and there is no option to delete it. Any suggestions how i can get rid of this message, and prevent my phone from always opening up in the blank message whenever i go into my messages, rather than just opening as my inbox?
    Many thanks

    Hard restart..  While the phone is powered in, hold the power and home button.   Hold them down and keep them held down.  the phone will eventually shut itself off and reopen.  keep held down till you see the appl elogo, then release.  This will not delete anything off your phone, it will just force all apps to stop their current process.  If you just turn the phone on and off, it will just pick up where it left off.  Good luck

  • TS3899 I can't see messages all of a sudden in my inbox when I connect via gmail but ok from message icon in my ipad

    Hi
    I have a problem. I was happily deleting and moving some emails from my Inbox on my ipad when all of a sudden, the messages just disappeared!!! When I tried to get to that page again, the address reads"mail.google.com/mail/mu/mp/12#tl/Inbox. So from Inbox down to All mail, the message just says"no offline messages" However, I still have messages in the business plan, travel etc boxes. I can view my inbox messages via the message icon in my iPad.
    I went to see an Apple store, I am based in Patong, Phuket, Thailand, where I bought it sometime in November last year. The technician could see the messages in my inbox from his Mac via direct connection through gmail  whereas I couldn't. As there is a language problem and I am an IT virgin, it all sounds double Dutch to me when he tried to say something about my server, and I had to take it down to an authorized apple service provider in town. I don't really want to do it unless it is the last resort as I have only my iPad, and I am sure it will take at least a week to be sorted out. Would greatly appreciate any help.
    Cheers
    Ben

    Messages should work with the email address that you use for your Apple ID. You have to be signed into that email address in order for any other email address that you have added to work.
    You should add your iPhone number to your Apple ID on the iPad, and then select that as the contact address at which you can be reached and all of the messages between the phone and the iPad will sync again.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
    Phone number missing on iPad or iPod touch
    If your phone number isn't listed on an iPod touch or iPad, follow these steps:
    Update to the latest version of iOS.
    Verify that you're using the same Apple ID that you're using on your iPhone.
    On your iPad or iPod touch, sign out of your Apple ID in the following locations:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    Sign in to your Apple ID with FaceTime and iMessage.
    If your phone number still isn't listed, follow these steps:
    Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    Sign in to your Apple ID on your iPhone.
    When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
    Sign in to your Apple ID on your other iOS devices.

  • Messages getting stuck in SMQ2

    Messages get stuck in SMQ2 with the Error msg "SQL error on database occurred when accessing a table".
    This is happening on PI system 7.11 SP04 with Max DB version 7.7.06.07.
    This typically happens when sending messages from one BPM to another although it has more of a random pattern.
    A corresponding dump is also seen in ST22.
    The dump details are as below:
    Runtime error : DBIF_RSQL_SQL_ERROR
    Exception : CX_SY_OPEN_SQL_DB
    Database error text : Invalid numeric value for parameter/column (10)
    Internal call code : "[RSQL/UPDT/SWFRXIHDR ]"
    Any help is highly appreciated in resolving this issue.
    Regards,
    Murali Narayanan

    > The dump details are as below:
    > Runtime error : DBIF_RSQL_SQL_ERROR
    > Exception : CX_SY_OPEN_SQL_DB
    > Database error text : Invalid numeric value for parameter/column (10)
    I would update the kernel (plus the database interface library lib_dbsl) to the latest patchlevels and try again. If the error persists I'd upgrade the database to the latest patchlevel. If it still doesn't work I'd open an OSS call (BC-DB-SDB).
    Markus

  • I bought a used i pod 4 for my daughter and it does not have the message icon on it: how can i put the icon on the i pod and get it receive and send messages

    I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Nokia 6300 - Instant Messaging icon/functionality ...

    Hi everybody,
    I'm from Canada, and just bought a Nokia 6300 brand new a few days ago. This morning, I went on my phone to change the wallpaper, and for a second, the phone blinked and changed back to the default provider theme. I then changed back the wallpaper, but when I go into the menu, my instant messaging icon is not there anymore. Obviously, restarting the phone didn't solve the problem.
    I don't know if anybody got this problem before. I've seen other functionalities missing like Calculator and Email and such, so maybe it's a software fault. Anyone can advise how to fix this problem? Is this a good phone or I just see the problems with it?
    My firmware version is 4.71 28/02/2007.
    Thanks in advance for your help.
    Angeli.Message Edited by angeli on 19-Jun-200705:29 PM

    It seems like your phones software has gone a bit corrupted. Please update it with the Nokia Software Updater. This should solve your problem, if not then you need to take the phone to a Nokia Service Center.

  • Message getting stuck in XBQO queue - Time limit exceeded

    Hi All,
    We have a BPM scenario in our project (on PI 7.0 SP18), where bundle of PEXR2002 Payment IDocs are received as a single flat file. This file is then consumed by the BPM, to split the message into multiple payments using Java Mapping.
    However, when we get an IDoc file of size greater than 5 MB (more than 500 IDocs), the message gets stuck in XBQO queue and eventually giving a SYSFAIL with the message "Time limit exceeded". Could you please let us know if you have encountered a similar issue and are aware of a possible solution.
    Any pointers to this will be really appreciated.
    Thanks & Regards,
    ROSIE SASIDHARAN

    H Rosie,
    1)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  EO_MSG_SIZE_LIMIT->possible values 0 - 2,097,151 (KB)
    The parameter EO_MSG_SIZE_LIMIT enables serial processing of messages of a particular size. This applies for messages with the quality of service Exactly Once (EO). If the message is larger than the parameter value, the message is processed in a separate queue.
    2)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  HTTP_TIMEOUT->possible values n Seconds, where n is a whole number.
    The parameter Specifies the timeout for HTTP connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
      See SAP Note 335162  for sysfail issue....
      Hope these will help u....
    Regds,
    Pinangshuk.

Maybe you are looking for

  • Final Cut Pro not under "Purchases"

    I bought Final Cut Pro this summer and I want to move the app onto my new computer, but when I go in the App Store it does not show up under "Purchases." I already deleted FCP off my old computer so I'm stuck with nothing. i checked other posts but n

  • How to set sourceURL for MS Access database in other computer?

    How to set sourceURL for MS Access database in other computer? getConnection("jdbc:odbc://www.micrsoft.com:9999/msaccess"); How do you determine the port for the MS Access? Thank you very much.

  • Functionality

    Hi experts, Wht is RRI functionality? Why we need to use this jump target? Wht is the use of this and how it impacts on the reports? thanks, deen

  • Today Events view

    Dear all! Has switched to E51 recently and was messing with daily events sync from MS Outlook to my phone. The events are by default shown in the following way: 'start time'-'end time' 'subject' and thus look ugly on the screen, like 9:00am-12:00pm A

  • BPC - Consolidation - Data Loading - Will BS/PL accounts data ONLY be loaded from ECC?

    Dear All, In BPC, when we load data from ECC for Consolidation, my understanding is that we load only BS and PL accounts' data for/by the entity. Apart from BS and PL data, will there be any data that will have to be loaded into BPC for consolidation