N73 not displaying txt messages! HELP!!

Hi there...pls help me....
had my N73 for months everything been ok!
For some reason today it will not display when I get a txt message, it does when i have a missed call but not when i get a txt...doesnt make a noise or anything!
Please help me!!!
xxxxx

12345
Nokia N95
V 20.0.015
0546553

Similar Messages

N73 - not displaying new messages

I upgraded my n73's firmware about a month ago and i am on Vodafone. On Saturday my phone stopped displaying and vibrating when i received a new text message, it also doesn't display the little mail picture under the the operator name. However i've noticed that when the screen saver comes on it displays that there is a new message and its not only when i keep checking my inbox that i will know.
Please help me out!!

I hv the same problem after upgraded my Nokia N73ME. from ver 3.0638 to ver 3.0705.1.0.31.
Before that all my sms was store in SD card memory. after upgraded it I cant read the sms message in the SD memory card. Even a new sms came in i just can see the sms subject but not able to open it.
Anybody facing this problem? but if i switch the sms storage selection to memory phone, I am able to view the message.
Please help

ADF FACES: af:messages/ does not display my messages at all

I am having an issue displaying messages using ADF MyFaces EA20.
<af:messages />
Within all backing beans I call messages with the following method to conveniently display messages when needed.
// Add invalid email address message
JSFUtils.addMsgToContext(FacesMessage.SEVERITY_ERROR, "setEmail_error", MsgConstants.INVALID_EMAIL);
The method utilized can be seen below:
public static void addMsgToContext(FacesMessage.Severity severity, String msgKey, String descKey) {
 // Check the parameter, if either short desc or desc both are empty
 if (StringUtils.isEmpty(descKey)) {
 logger.error("Message description are empty. Do NOTHING just return");
 return;
 try {
 logger.debug("Add Message to Context");
 FacesContext context = FacesContext.getCurrentInstance();
 Application application = context.getApplication();
 // Add the message to the context
 context.addMessage(msgKey, getMessageFromBundle(descKey, severity));
 } catch (RuntimeException e) {
 * Supress RuntimeException.
 logger.error("Error occured when add message to context", e);
With the first login page when validating username and password, the messages I send to the context display correctly, for example, incorrect password please try again and this uses exactly the same code as above in the backing bean.
However once a session has started the messages simply do not get displayed and are not included in the HTML the <af:messages /> is replaced with nothing.
No runtime exception is thrown.
If anyone has any idea of why the messages are not being displayed I would be very grateful to hear them.
Finally if I may add that I used this method of displaying messages in a previous project and it was fine. This time the only difference is that I am using Hibernate.
The closest answer I could find to a similar issue with Oracle Forums was:
The messages have to be added before the Render Response phase. It's generally very unusual to add messages in a bean getter/setter. I'd restrict yourself to adding messages in event listeners and actions.
I do put messages in my setter methods as this is where I perform validation, but I have tried moving them to the main method called by the action button and this still does not display my messages.

Frank
There is a standard way? Next time you can simply tell me to RTFM ;-) . I am working on a project and was assigned my particular section and was told that the messaging aspect and validation was not urgent, until now near the end of the project when it has become urgent. Rather then listen to my colleagues answer of "this is the way to do it" your answer suggested that we working in a non-standard way.
Having looked at Oracle JDeveloper 10g (10.1.3) Documentation, Validation, Conversion, and the Application Lifecycle section I noticed:
Render response:
Either display new page based on invoked navigation rules, or displays same page with errors.
I was providing a new navigation String to the same page under all conditions, which I guess gives a new context and so does not display the messages. Under error conditions I now return an empty navigation String and now it displays my messages.
Thank you for your help with this and I promise to read the manual next time.
Andrew

Mail not displaying certain messages

Mail is suddenly not displaying certain messages in mailboxes. I can see and select the message in the center pane, but when I click on it to display, I get the "Loading" text and the spinner. This continues without resolution, though sometimes the messages will display after quitting Mail and/or rebuilding the Mailbox.
It is not random messages that do this, but always the same ones that refuse to display. But they will display sometimes after a rebuild, so I know they aren't gone.
Some have image attachtments, others do not.
This just started this morning, following running Disk Utility to repair some HD corruption last night. Prior to that, Mail (and Safari) had been running very slowly for about three weeks.
I have already repaired permissions on this drive.

Acutab,
I had the same problem. I took your advice and rebuilt the mailbox-voila. The problem was solved. I have also noticed Safari running slow. I will try and run Disk Utility

IChat will not display status messages.

I'm having a problem - iChat will not display any "available" status messages. All away messages display properly, but any unique status messages will not display, nor does the word "available". I have restarted both iChat and my MacBook several times, deleted the com.ichat.AIM preferences file, but it seems nothing I do will make my buddy's unique status messages display.
I did not previously use Chax but downloaded it to see if it would help; it didn't. I'm willing to delete it if it will solve my problem.
Any help?
Thanks!
Message was edited by: Paperclippe

Ok,
As you either suspected or found out the Saved Status Messages are in com.apple.ihat.plist
The fact they didn't display would suggest that they may have become corrupted and the deletion of the .plist would have helped.
BUT you went on to mention that the Available Choice also does not display.
This would suggest one of two things.
1) Either you are not fully Logged in to the AIM servers properly
Do your Buddies see you are On-line and Available ?
Do they perceive your Status change ?
Can you Text chat to people ?
Can you send files or Pic in Text chats ?
Try Deleting com.apple.ichat.AIM.plist and restarting iChat to see if that helps
2) Something about iChat or it's support folders (the bits that make the Available show up), that are at fault.
In this case try deleting com.apple.ichatAgent.plist
This controls which accounts login and help the app to run some of the features such as the Video/Audio part and Text Messaging.
I would do these one at a time just so you know which it was that fixed it.
8:27 PM Friday; June 20, 2008

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

FRM-40200 (Not displaying the message)

Hello Guru,
I am using oracle database 11g and forms 10.0.1.2.3 version. I have a for with 2 block. One block is non data base block. Another is data base block, but query data source type is from clause query. i.e. this block is depend on a query. In the when-new-form-instance trigger I am executing the query add getting the result. The block insert and update property is false. After load the form If I am updating the items value, I am not getting the message "FRM-40200: Form is protected against update". Alos the on-error and on-message triggers are not firing. In on-error trigger I am not handing any error, also I am not supressing any error in the on-message. Any reasion for this, and how to display the default message?
Thanks
SUN
Edited by: User SUN@ on Apr 20, 2009 3:41 PM

hi,
a from clause query does not allow updates.
You have a couple of options.
Convert your from clause query to a vew and (if the view is key-preserved) you will be able to update the returned records
Base your block on a procedure and write update/lock procedures to process your updates
Hope this helps
Neil

Robo 5 generated Help File (CHM) is not displaying the target Help page

Hi,
I am using Robo 5. AFter generating the CHM file and linked to the target application, the CHM file is not displaying content for a specific page.
The concerned topic, for which the CHM is not displaying content, is included in TOC also.
When the target topic in the TOC is clicked, the CHM file is displaying the following message: Navigation to the webpage was canceled.
Can anybody tell me why it is happening like that?

Does it display OK if you open the help independently of the application?
If it does, then the problem has to be in the call.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Not displaying Log Message

Hi All,
I facing problem in displaying the log message.
Here is what I am doing.
I have created a RDF Report, In that In Before Report Trigger I have called Packaged.Procedure.
(Packaged.Procedure has all code that is needed.
I have used the
fnd_file.put_line(fnd_file.log,'Message') to display message in log.
But when I ran the report I am getting the expected output. But when in Log I am not seeing the Message.
Please help me how to display message. Or is there any way to display message in Log.
Note: I didn't register the package as Concurrent Program. I have Concurrent program of type Oracle Report.
In package I didn't use parameter ERRBUFF and RETCODE, since it is necessary only if we register as Concurrent program.
Thanks in advance.
Regards,
Uva.

Hi!
Lets try these once again even if u followed previously....
1. First go to SXI_CACHE and do cache refresh once inorder to reflect the IR and ID Objects once again....
2. Also do Adapter Cache refresh once again some times adapters may not reflect the updated changes and then now make some changes in the SUBject and save and activate it..
3. THis Point is Optional Suppoe if you are using any FTP FILE ADAPTER
Check the source and destination folders are same as give in your channel and FTP also please check the file name mentioned is exactly same and make sure there may not be any spaces
4. If possible if u r admin do once J2EE Soft Restart instead of restarting entire server..or else instead of doing hard restart..
5. After making changes and saving and activating try the scenario once aand also go to Run time work bench and communication channel Monitoring onceagain check the status...
6. Most important thing is Go To RWB--> Message Monitoring--> Check the status of the message in both Integration Engine and Adapter ENgine so that you can get where it is failing and also where it was strucked....whether in Integration server side or else Adapter Engine side...
7. Also please check one again SXMB_MONI, SMQ1 and SMQ2 and ST01 ( which is used to Trace the message by using this ST01),,,
I hope it works....also check once mapping side once again...
Regards:
Amar Srinivas Eli

Method Validator is not displaying Error Messages

Hi!
I'm using JDeveloper 10.1.3.1.0. I have to validate the value of a particular field in a form, and I've done this via method validator on my Entity Object. If the validation succeeds, I return true; otherwise, I return false as specified in the documentation. The issue is that the error message I added via the wizard is not appearing when my code returns false. I debugged my application and verified that my test case did indeed fail validation and return a false value, but no error message appeared. Furthermore, I tried raising a JboException in this validation code, and it too didn't appear.
However, when I placed my validation code in the setXXX method of the attribute I was validating, the JboException message was displayed.
Given that the ADF manual is encouraging developers to place validation code in method validators, I found it strange that any excpetions thrown by method validators colud not displayed.
Can anyone help clarify this behavior?
Thanks!
Rey

Rey,
What view technology are you using (JSF, Swing, etc)? If you are using ADF Faces, do you have an af:messages component on the page?
Regards,
John

Crystal Report V9 do not display decimal value HELP!

I have a field in Informix data type is Decimal(6,2)when i used the field in the report, the decimal is not displayedexample: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!

have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.have tried the formula as well but still doesnt work.any other possible solutions, pls help, thanks.

Data not displaying the report (Help me out Urgent)

Hi Folks,
When i am executing the query and web reports for the date 27/11/2007 & 28/11/2007 am not getting the data its saying "No applicable data found"
But i can see the data in the ODS for those dates.
Report is working fine till 26/11/2007.
But when the user is trying to check the reports for the above mentioned dates its not displaying.
Even in checked it the RSRT as well but the same case over there the data is not displaying.
Its bit urgent as its month end user wants to see the reports.
Any help or any clue will be great helpfull and appreciated.
Urs,
RK
*****Points Committed

HI Suchitra,
First check out how many records are there in the ODS as on 27th and 28th
There are totally 750 & 427 records on 27th and 28th.
At the time of executing the query,are using giving any variable entries?
Yes we are using variables entires like PO Date & PO number we usually check the reports giving the date in PO Date variable,
Any other clue please?
Urs,
RK.

Raise_application_error is not displaying error message in my form

Hi,
I have created one procedure in order to display the error message in front end forms.But which is not display the error message in my form when call the procedure.
Please refer the code.
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR(-20001,P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
END;
Thanks & advance
Regards
Maran

Hi,
-------form program unit------
PROCEDURE RAISE_APP_ERR(P_ERR_CODE NUMBER) IS
alert_button NUMBER;
Raise_Exception EXCEPTION;
PRAGMA EXCEPTION_INIT(Raise_Exception, -20001);
BEGIN
--- called backend procedure
PRC_RAISE_APPLICATION(P_ERR_CODE);
EXCEPTION
WHEN Raise_Exception THEN
alert_button := SHOW_ALERT('raise_alert');
If alert_button = ALERT_BUTTON1 Then
Raise FORM_TRIGGER_FAILURE;
End If;
END;
---------- db proc----
CREATE OR REPLACE PROCEDURE PRC_RAISE_APPLICATION(P_ERROR_CODE IN HRM_ERR_CODE.HEC_ERR_CODE%TYPE
) AS
CURSOR C_ERR IS
SELECT HEC_ERR_ARB_DESC
FROM HRM_ERR_CODE
WHERE HEC_ERR_CODE = P_ERROR_CODE;
M_ERR_ARB_DESC HRM_ERR_CODE.HEC_ERR_ARB_DESC%TYPE;
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
IF C_ERR%NOTFOUND THEN
M_ERR_ARB_DESC := 'UNKNOWN ERROR ';
END IF;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
EXCEPTION
WHEN NO_DATA_FOUND THEN
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||'-'||'UNKNOWN ERROR ');
END ;
I tried the same but still i am not getting error message in Forms.

Why do IMAP accounts not display new messages in viewer?

I have been having persistent problems with Mail not displaying new IMAP messages in the viewer. I know the messages are on the server because I can see them on my iPhone. Sometimes they will appear if I quit Mail, then relaunch it. Other times it is necessary to restart to make them appear. I have deleted and recreated the accounts (MobileMe and Gmail), reinstalled the 10.5.7 update and applied the latest Java update.
The Console messages make it seem like in might be a conflict with Safari 4.02. Upon starting Mail I get messages like this:
07/27/2009 3:01:35 PM Mail[302] WebKit Threading Violation - NSData* -[WebArchive data](WebArchive*, objc_selector*) called from secondary thread.
I've seen similar complaints elsewhere in forums, but have found no solutions. Is there one?

Can you refrain from viewing the messages on the iPhone, and only check via webmail to see if new ones are then failing to be noted?
Btw, in Mail Preferences/Accounts/Advanced is use IDLE selected for either account -- I select it for MobileMe, but not for Gmail? When selected for MobileMe, the mail is "pushed" to eligible devices, and in Mail, results in the new message chime not sounding for that one account.
Ernie

TS2755 'Not delivered' txt messages

I can send txt messages to everybody except replying to my wifes' iPhone. She is beginning to take offence. Any suggestions ( Divorce is not an option).

If you both have iPhones, I would deactivate iMessage on BOTH devices, then reactivate each with its own Apple ID.
Then try again.

N73 not displaying txt messages! HELP!!

Similar Messages

Maybe you are looking for