N73 - SMS Guard conflicts with Lifeblog

I've installed SMS Guard on my N73, and everything was working fine...UNTIL I thought I'd look at what LifeBlog app on my phone was all about... since then, SMS Guard has stopped working...
Does anyone know what the problem is and a work around... I can't delete Lifeblog, or remove it... No the Apps Manager does n't remove it... it appears that Lifeblog has modified something with the messages that crashes SMS Guard when you run the Manage SMS feature.
Appreciate any help... don't want to take the drastic step of resetting phone, just need to get things back to the way they were before Lifeblog made life a pain!!!
Dan

Korngear
Thanks for the sympathy... Lifeblog obviously has its place in the world on Nokia, but the way these developers write software, that completely **bleep**s other things really ****** me off...
I'm using SMS Guard to hide personal messages... but since Lifeblog took over.. its just not worked... Is there anyway to hide personal messages on the phone, but still be able to upload them onto the pc...I've looked through the folders on the phone memory, can't even find the messages are kept... can only see them in pc suite...
Dan
Moderator note: edited for potentially offensive languageMessage Edited by michaels on 28-Sep-2007 05:29 PM

Similar Messages

Private Call&Sms Guard on fp2 (N85, N96)

Has anybody installed "Private Call&Sms Guard"
on an N85 or N96? I tried, it installs but then it does not start with any further indication.

i have the versions 3.0 and working prety goog,you might have to do reformate your device ,make sure of before you do that save your data and have back up , you can use ovi.com for saving your data,sometimes is happens i downloaded to my PC then transfer it to device with pc suit . i hope you can run it too . R
The only thing necessary for the triumph of evil , is for good men to do nothing .

K7N2 DELTA ILSR has conflicted with ram....

K7N2 DELTA ILSR has conflicted with this ram....
http://www.kingmax.com/product/pro_superMPXB62D-383.htm
I got 2 * 256MB DDR 400 of the above ram.
Is there any conflicted with K7N2 DELTA??
amd 2500+
thank you
BIOS version 7.4

Quote
Originally posted by utada
I have already brought kingmax
These boards are very picky with RAM. As Bonz has pointed out their is an approved list near the top of the Forum but unfortunately I don't beleive Kingmax is on it. Sometimes the generic RAMS run, sometimes not. It seems to be hit or miss. If you want a recommendation of good quality RAM I would suggest MUSHKIN first and CORSAIR second. Good Luck
Rob

Flash Player 10 does not work in IE or Firefox. What could it conflict with?

I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?

Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
>

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome

Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html   The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
                              #slideshow {
                                  padding: 10px;
                                        margin:0;
                              #slideshow-caption{
                                        padding:0;
                                        margin:0;
                              #slideshow img, #slideshow div {
                                  padding: 10px;
                                  background-color: #EEE;
                                  margin: 0;
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background: #004B8D;
          margin: 0;
          padding: 0;
          color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
           /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
          position:relative;
          left:-90px;
          width:950px;
          height:350px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          z-index:1000;
.slide{
    position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color: #42413C;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #6E6C64;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
          width: 960px;
          min-height:900px;
          padding:5px 0px 0px 0px;
          background: #E8F8FF;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background: #E8F8FF;
          padding:10px 5px 0px 5px;
.sidebar1 {
          float: left;
          width: 225px;
          margin: 60px;
          color: #FFFF0D;
          background: #595FFF;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
          padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
    z-index:-1;
.sidebar2 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:2;
.sidebar3 {
          float: left;
          width: 275px;
          color: #FFFF0D;
          text-align: left;
          background: #595FFF;
          padding-bottom: 10px;
          border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    border: 3px solid #F7F723;
    z-index:3;
.content {
          padding: 0px 0px 0px 0px;
          width: 780px;
          float: left;
          background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
          padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
          list-style: none; /* this removes the list marker */
          border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
          margin-bottom: 50px; /* this creates the space between the navigation on the content below */
          font: Arial Black, Verdana, , Helvetica, sans-serif;
          font-size:1.3em;
          font-weight:bold;
          z-index:2;
ul.nav li {
          border-bottom: 0px solid #FFFF66; /* this creates the button separation */
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
          padding: 3px 0px 5px 0px;
          display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
          width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
          text-decoration: none;
          color: #FFFF0D;
          background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
          background: #595FFF;
          font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
          color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
          padding: 10px 0;
          background: #595FFF;
          color: #FFFF0D;
          position: relative;/* this gives IE6 hasLayout to properly clear */
          clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header">
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="about.html">About Us</a></li>
      <li><a href="history.html">Reardan History</a></li>
      <li><a href="activities.html">Activities</a></li>
      <li><a href="business.html">Business<br />
        Directory</a></li>
      <li><a href="about.html">Join the<br />
        Chamber</a></li>
       <li><a href="links.html">Links<br />
  <span style="font-size: 85%">Tourism</span><br />
      </a></li>
    </ul>
     </div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
                           slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
                    after:                              slideshowOnCycleAfter, //the function that is triggered after each transition
                    autostop:                              false,     // true to end slideshow after X transitions (where X == slide count)
                    fx:                                        'blindX',// name of transition effect
                    pause:                              false,     // true to enable pause on hover
                    randomizeEffects:          true, // valid when multiple effects are used; true to make the effect sequence random
                    speed:                              100, // speed of the transition (any valid fx speed value)
                    sync:                              true,     // true if in/out transitions should occur simultaneously
                    timeout:                    5000, // milliseconds between slide transitions (0 to disable auto advance)
                    fit:                              true,
                    height:                       '300px',
                    width:         '525px'   // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
          if (slideshowAddCaption==true){
                              $('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
    
    <img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
    <div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
    <img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>

<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
    <br />
    <br />
    <br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center">    <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
    <br />
    <br />
    <br />
    <br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
        <p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
          <span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
        </p>
        
</div></body>
</html>

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

How to Rename a Topic ID in Map File to Avoid Conflict with Another Program?

Robo 8 HTML:
Can somebody assist me in understanding how to rename a topic ID in my map.h file?
An application programmer informs me there are nine topic IDs (shown below) in my project map file which conflict with predefined names of constants/functions from the Visual Studio Libs program and, is requesting I change the names of the topics listed below to resolve topic ID conflict in order to enable F1 call for these topics.
#define Open    59
#define Save    60
#define Print   63
#define Cut     72
#define Copy    73
#define Paste   74
#define Clear   75
#define Status 81
#define Substructure 139
Can I simply alter the topic names and retain their associated map numbers in <Create/Edit Map ID> dialog to resolve the map file conflict with Visual Studio Libs program functions? Or, is there more work involved in changing a topic name in a map.h file?
Any assistance with this question is greatly appreciated.
Thanks,
robert

Hi,
Simply renaming the TopicID's in the .h file won't work. The TopicID is used in the alias file (projectname.ali) to link a map number with a topic. Also, you can use either TopicID's or map numbers to call the help. (Using TopicID's only works for WebHelp afaik.)
If you use map numbers to call the help, you can rename the TopicID using the mentioned dialog. No problem.
If you want to change the ID from the files, you have to change both the .h file as the .ali file. No changes to topics needed.

How to get web application to use Tuscany without conflicting with SAP SDO

Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
<u>Downgrading Firefox </u><br />
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
<u>Try Flash with Protected Mode Off</u><br/>
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
<u>Your experience in submitting troubleshooting information on the forum</u><br />
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

Do I have a conflict with iTunes 7.6.2 . . or what ?

Dunno if I do or not, but . . shortly after upgrading to iTunes 7.6.2 we suffered a power "Blink" . . and when i noticed it had happened the Mac was attempting to restart . . with a blinking Mac, then a question mark in the icon . . nothing else . . In the past I've seen it once before, and a shutdown and restart was all that was necessary . . This time . . NO . . Nada, same deal, through 8 restarts . .
I finally reinstalled OSX 10.1, and followed with all the updates directly from Apple . . using the "Update" command under the apple . . It now does "funky" things . . like, one, it doesn't recognize the WD External HD on the desk top, but it does in the system profiler . . another, once in a while a dialog box comes up asking what to do with a disk, initialize, eject or ignore . . and probably what leads me to believe it could be a conflict with iTunes is during shut down, iTunes will not "Quit", even when using "Force Quit" . . it will close the desktop, go to a blue screen and then start up again . .
And . . I'd really like to install 10.4 but I can't seem to find anyone with a legal one for sale . . I called Apple a week ago and they said they might produce them in four or five weeks . . what's my options here?

None the less . . we still gots gremlins . .
And while I'm asking . . how come Safari is so fragile? The other nite, my wife and I were making reservations and one motel group's site crashed Safari just about 2/3ds the way through opening every time we tried . . went over to Explorer and it opened about twice as fast and operated smoothly . . This happens a lot at different sites . . always wants to know if I want to report it . . To Who?
Is 3.4.11 going to exorcise those gremlins or do I have to hire some IT Guy . . ? I've owned a Mac of some kind since the Mac IIx, (about 5, I think) but it's a tool, not a toy to me . . I just drive it . . run McJanitor once a month, clean out the icons in Safari's library and all the little maintenance thingies, but I'm no troubleshooter . . .

Type conflict with ASSIGN in program CL_WD_ADOBE_SERVICES==========CP

I am trying to display an interactive Adobe Form in the webdynpro for abap.
But i'm getting this error:
The following error text was processed in system AED : Type conflict with ASSIGN in program CL_WD_ADOBE_SERVICES==========CP .
The error occurred on application server AIERD_AED_00 and in work process 1 .
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: NODE_2_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: DATASOURCE_2_FM_PARAMS of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF_DDIC of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CADOBE==================CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program CL_WDR_VIEW_ADAPTER===========CP
Is there any problem with some Adobe config or somewhere a mistake in my code.

Follow this thread
[Displaying a Smartform as PDF in WDA;
Thanks
Siva

Type conflict with ASSIGN in program in Release time(ESS)

Hi All,
On clicking on the link "Release Working Time Data" from EP While releasing working time below exception is being thrown.
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Type conflict with ASSIGN in program SAPLHRXSS_CAT_WEBDYNP., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.release.blc.FcCatRelease.rfcExecute(FcCatRelease.java:494)
     at com.sap.xss.hr.cat.release.blc.FcCatRelease.rfcDoInit(FcCatRelease.java:424)
     at com.sap.xss.hr.cat.release.blc.FcCatRelease.onInit(FcCatRelease.java:377)
     at com.sap.xss.hr.cat.release.blc.wdp.InternalFcCatRelease.onInit(InternalFcCatRelease.java:274)
     at com.sap.xss.hr.cat.release.blc.FcCatReleaseInterface.onInit(FcCatReleaseInterface.java:194)
     at com.sap.xss.hr.cat.release.blc.wdp.InternalFcCatReleaseInterface.onInit(InternalFcCatReleaseInterface.java:166)
     at com.sap.xss.hr.cat.release.blc.wdp.InternalFcCatReleaseInterface$External.onInit(InternalFcCatReleaseInterface.java:258)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.cat.release.vac.entry.VcCatReleaseEntry.onInit(VcCatReleaseEntry.java:270)
     at com.sap.xss.hr.cat.release.vac.entry.wdp.InternalVcCatReleaseEntry.onInit(InternalVcCatReleaseEntry.java:174)
     at com.sap.xss.hr.cat.release.vac.entry.VcCatReleaseEntryInterface.onInit(VcCatReleaseEntryInterface.java:189)
Pls help to resolve the isuue
Thanks,
JB

Hard closed

Type conflict with ASSIGN in BADI for Virtual Key Figures

We get the below error dump in ST22 when executing BEx queries that contain virtual key figures.
error message - 'Type conflict with ASSIGN in
program "ZCL_IM_THR_RSR_OLAP_BADI======CP".'
We have a BADI implementation that calculates few virtual key figures included in some infocubes & multiproviders. The error would arise if we execute two queries (containing common Virtual Key figures) one after the other without closing the first query.
We found a note "Note 1237689 - Virtual chars. and key figures in input-ready querys" that could be relevant to our issue and wanted to apply this note but unfortunately the note is only applicable to SAPKW70016 to SAPKW70018 and we are support pack 15.
Can you please advise what the problem could be/suggest corrections for the same.

Hi Kulmohan,
Did you fix your issue? We are facing the same issue. Could you please let me know if you have any solution for this issue,
Thank you,
Mike

Is anyone else having conflict with 10.8.2 update and audio files?

I recently updated from 10.8.1 to 10.8.2 (big mistake). Now my digital interface has all of these random clicks and pops. Worse yet, when I try and play my audio files (Digital Performer) or ITUNES that music stops, starts, stutters and is basically unlistenable. Before the update everything ran smoothly. I talked with the tech support for my digital music application (Digital Performer) and he thinks there is a conflict with the latest Apple update too. Is anyone else having these problems?
To get back to 10.8.1 do I have to wipe the hard drive and re-install everything? I use my Mac for music production so this is killing me. Any ideas?

I once again reloaded 10.8.2, all of the current firewire, USB, and printer drivers (why not make sure those are up to date too, what have I got to lose?). Checked the cables, the Mac firewire ports etc. No change.
So I bought a cheap back up firewire drive (Western Digital, My Passport Studio-about $100). That worked perfectly on the firewire port of my Mac Pro.
I hooked up my MOTU 828 firewire audio interface into the Western Digital's second firewire port, and everything works perfectly.
I wish I had known that daisey chaining devices would solve my problem before I spent $500 on a new firewire interface.
If you are having similar problems with firewire connection, then try daisey chaining through a device that has no problems. Who knew a solution could be so simple?

N73 - SMS Guard conflicts with Lifeblog

Similar Messages

Maybe you are looking for