N73 turns itself off when using real tone

When i have an incomming call, and have a real tone selected, my phone rings for 3 rings then dumps and turns itself off. It works again when i turn it on but if i call it again it does the same thing. I have tried using a real tone from the phone and from the memory card and it does the same thing. This does not happen with a polyphonic tone. Any suggestions?
thanks

thank you for your advice. I have discovered that most tones work, but the odd one is still dumping the phone. I will just use the working ones now.
thanks again for your advice.
Lucie

Similar Messages

Samsung Convoy - keeps turning itself off when closed up

I'm having trouble with the Samsung Convoy turning itself off, when I close it to hang up. Sometimes it does it, sometimes not. If I try to slowly and very gingerly close it, it may not turn off. Is anyone else having this problem? It's very annoying as I find out my phone has been off and I didn't know it.
Thanks!

Hello tdugdell,
I know it can be a bit frustrating when your device powers off without your knowledge. Since you do have the most recent software I would first suggest to try a different battery in the device to help confirm if the root cause is device or simply the battery. If you do not have an additional battery we can see if your nearest store has a test battery to try and if not we can see what warranty options you may have. If the test advises this is not a battery issue I would then suggest completing a factory reset. Click here to follow visuals to do so. This process will erase everything on the device so please back up if desired. Click here to for visuals to back up your contacts. Once the reset is done the device will power cycle and prompt a re-activation by dialing *228 send option 1. I would like for you to test the device before you add your contacts back via backup assistant if you choose to use the application. If the test(s) is successful then proceed with adding your contacts and retest after. Please advise me of the results, per the suggestions above, if you need additional assistance. Thank you.

Why is iPad suddenly turning itself off when on any app? Battery is fully charged.

Why is my iPad suddenly turning itself off when in any app? Doesn't seem to be just one or two. Battery is fully charged. Screen goes dark.

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

Phone freezes and turn itself off when the "Ph. se...

I got a Nokia n97 mini 2 weeks ago and the phone works great except that sometimes it would turn itself off and when I turn it back on it lags and freezes. I notice every time the phone freezes and turn itself off when the "Ph. setup" in the App menu is running. Is the device updating itself? How can I make it stop? Everything freezes as soon as the Ph. setup starts running.
I try waiting it out (if the phone is setting something up it shouldn't take more than a few minutes) but I leave it there for several hours and it's still frozen.
Thanks for reading -sorry if my English sucks-

Fireemt125 wrote:
Is there a way to turn Siri off when phone is locked
Settings > General > Passcode Lock.
FYI: Siri can only do certain things when locked. It will not do anything that requires the iPhone to be unlocked (without first unlocking the iPhone).

E65 Turns itself off when it pleases!

Hi, my E65 turns itself off apparently as and when it pleases. Sometimes as many as 5 times a day, but on other days not at all. Sometimes it happens when I close it after a call. and other times it goes just when I want to answer a call. Has anybody else had this happen? if so what can I do about it?
From a business point of view, I need my phone, but if I can't rely on it, I'll go looking elsewhere. Thanks in advance.

have you tried updating firmware
here is the support site for your phone
http://europe.nokia.com/A4346079
also
If your phone appears to have problems with power, the problem may be with the phone, the battery, or the charger. Before bringing your phone into a Nokia Care point for inspection, please perform the following checks:
* Fully charge the battery according to the instructions presented in the user guide.
* Remove and re-insert the battery according to the instructions presented in the user guide.
* Check that you are using a Nokia battery and charger compatible with your phone model. You can check compatibility from the Battery Compatibility Chart and Charger Compatibility Chart.
* If you have access to another battery and charger of the same type as yours, try substituting them to determine if the issue is with the phone, the battery, or the charger.
If you are unable to test your phone or it still keeps switching off, please bring it to the nearest Nokia Care point for inspection. You can find Care point addresses from the drop-down menu to the right
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

My iPhone 4S keeps turning itself off when I still have battery life and then it doesn't charge?

It's only just started doing this and it's really annoying me now!! Ha
I'll charge my phone up overnight then a couple of hours into the next day the battery wil be down to about 20% then it will say I only have 10% left even though I will have 20% if you see what I mean? And then to top it off it turns itself off and won't let me recharge!!
It did happen to my iPad the other week but that seems to be fine now.
I've tried changing and checking chargers etc but they seem to work it other people's and my iPad seems fine now

Hi there glee154!
I have an article here that can help you troubleshoot this issue with your iPhone. The article is about troubleshooting a multitude of iPhone hardware issues, and can be found right here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
The specific section you will want to reference can be found here:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

N73 turning itself off

Hello, i have a weird problem with my N73, its 6months old and firmware had been updated to latest about 2months ago... since 2 weeks the fone has been showing weird behaviour it keeps turning itself off about once a day... is anyone else expierencing this?

@troubleshooting;
Try to change your sim card.
If you want to thank someone, just click on the blue star at the bottom of their post

IPhone screen doesn't turn itself off when on lockscreen

Ever since I updated to 3.1.3, if I leave my phone somewhere locked, and I get a notification it lights up the screen, as it used to, but then it never turns itself off again. Which means if I'm at work for example, get a text 5 minutes after I start then my phones screen is left on all day, leading to the battery being flat by the time I finish work.
I have auto-lock set to 1 minute so that is no the issue.
If anyone has any idea on what could be causing this and how to fix it I'd appreciate it!
Thanks

Then the next step would be a restore, with or without your backup. See p. 204... http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
You might also play around with your auto-lock settings... on/off, different times, etc.
Message was edited by: paulcb

Nano turns itself off when center button pressed 4 music

my 2gb nano turns itself off only when you press the center button to select music. u can still view photos and play with extras and settings though?! Tried all toggle hold buttons/reset options and plug into PC (shows fine in itunes) but nothing resolved. Does anyone have a solution? Thx
Dell Windows XP

Welcome to Apple Discussions!
Have you tried a restore?
Restoring Your iPod
btabz

Nokia 700 GPS turns itself off (while using Endomo...

I have a Nokia 700 and I'm using Endomondo app which requires GPS.
Why does the GPS turn itself off? I have experienced it couple of times. After GPS turned off I checked battery status and it was 40%, also time after GPS turns off differs almost every time.
I have used Endomondo on Nokia 5800 and it worked well.
How can I fix this?
Please help!!

@ceres
Don't use this application myself but not noticed such issue upon 700, have you tried installing http://store.ovi.com/content/165671 and run this in the background and see if it still happens.
Happy to have helped forum with a Support Ratio = 42.5

TS3274 IPad turns itself off when I'm viewing pages

Something new that I haven't seen before is a Debug Console and it will tell me I have messages. When I click on the messages there are HTML, JavaScript or CSS error messages. Is this something new? What is causing the errors. Would this explain why the iPad shuts itself down when I am viewing pages?

Without examples to try out here, there are some basic troubleshooting tips you should try.
1. Restart the ipad. Hold the top button till you see the swipe to turn off, swipe to turn the iPad off and then restart.
2. If a restart doesn't fix things, try a reboot by holding the top and home buttons simultaneously until you see the apple logo.
3. Try a different wifi network. You may be having issues with your connection.
4. Go to Settings -> Safari and clear the history and cookies and data. Also open the Advanced section and make sure Web Inspector is turned OFF.
5. If these steps don't fix the issue, you may need to do a restore using a computer with iTunes installed.

"Maximum Render Quality" Better to turn it OFF when using CUDA MPE?

http://crookedpathfilms.com/blog/201...port-settings/
"IMPORTANT NOTE ABOUT RENDERING TIME: Make sure you do not select “Use Maximum Render Quality” if you are utilizing the accelerated GPU graphics (Mercury Playback Engine). This will not improve your video and will only slow down the rendering speed by as much as 4 times!"
http://blogs.adobe.com/premiereprotr...e-pro-cs5.html
"For export, scaling with CUDA is always at maximum quality, regardless of quality settings. (This only applies to scaling done on the GPU.) Maximum Render Quality can still make a difference with CUDA-accelerated exports for any parts of the render that are processed on the CPU...
When rendering is done on the CPU with Maximum Render Quality enabled, processing is done in a linear color space (i.e., gamma = 1.0) at 32 bits per channel (bpc), which results in more realistic results, finer gradations in color, and better results for midtones. CUDA-accelerated processing is always performed in a 32-bpc linear color space. To have results match between CPU rendering and GPU rendering, enable Maximum Render Quality."
Here is what I got out of after reading those two sites:
I should turn it off for it's always ON (when CUDA MPE is used) regardless I check or uncheck it.Turning it ON only offloads the calculation to CPU (instead of GPU) hence slowing down the previewing and encoding performance.
So I guess I should have Maximum Render Quality setting turned OFF in both of squence settings and export settings.
However, David Knarr of Studio 1 Productions suggest otherwise:
http://www.studio1productions.com/Articles/PremiereCS5.htm
"When you startup Adobe Premiere CS5 and you don't have a certified video card (or one that is unlocked) the Mercury Playback Engine is in software rendering mode and by default the Maximum Render Quality mode (or MRQ) is to OFF.
(Maximum Render Quality mode will maximize the quality of motion in rendered clips and sequences. So when you select this option, the video will often render moving objects more sharply. Maximum Render Quality also maintains sharp detail when scaling from large formats to smaller formats, or from high-definition to standard-definition formats. For the highest quality exports you should always use the Maximum Render Quality mode.)
When you unlock Adobe Premiere CS5 so the Mercury Playback Engine can use almost any newer NVidia card (or if you are using a "certified" NVidia graphics card), the Mercury Playback Engine will be in the hardware rendering mode and the Maximum Render Quality mode will be turned ON.
Since the software mode is not set to maximum render quality, it can sometime render faster than the hardware render, but a a loss in qualitly. If you set the software to maximum render quality you will see that it is very, very slow compared to the hardware render.
Here is how to set the Maximum Render Quality.
1) Open up Premiere CS5
2) Click on Sequence at the top of the screen
3) Then select Sequence Settings
4) At the bottom of the window select Maximum Render Quality and click Okay
It is always best to be using the Maximum Render Quality mode,"
Now, I'm lost.

Okay, I am loosing it..... You are correct.
I am not sure what I was remembering, I could have sworn that when I loaded Premiere CS5 for the first time before I unlocked the video card, the Maximum Render Quality mode was NOT checked. Then when I unlocked the video card, the Maximum Render Quality mode was check to ON and I didn't set it to be On.
I just when back and uninstalled Premiere and re-installed it, to see what was going on and I was totally wrong.
Sorry for the mistake and I will be updating the article on my website in the next 15 min.
Also, I have written a small program to do the unlock automatically. The program is free and it works with the cards listed under the Automatic Mode.
If your video card isn't listen, just let me know what your card is and what you typed into the cuda cards file and I will add it to the program.
David Knarr
Studio 1 Productions

How do i stop a game from jumping or turning itself off when i am playing on it?

When i am playing on temple run 2, subway surfers and the odd occassion candy crush, the game is slow to when i am directing them to move or they are just turning themselves off. Does anyone know why this is or how i can stop it? I have tried turning ipod off and on again and deleteing the app and re-installing it and nothing is happening.
Any help would be great. Thanks.

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

Phone turns itself off when calling

Hello,
When someone tries to call me or when I call out, about 50% of the time the phone will say "Mobile Network Not Available" and then it shuts itself off.
Any help?
Thank you.
This is my second Xperia phone...I bought one 2 weeks ago and it seemed to have overheated and then they gave me this one...they both had the same problem with calling...

Get a brand new MICRO Sim card
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

My N73 turns itself off

My N73 is practically new and I updated it with the latest firmware (4.0726.2.0.1).
Every day or so I find it turned off while there is still plenty of charge left.
Strange behavior for a brand new N73 with latest firmware.
I have no clue what's happening and I'm wondering what I should do.Message Edited by snoxu on 15-Aug-200710:37 PM

Are you sure its not gone into sleep mode?
I recall having mine randomly do this the other day as it didn't respond and when I pushed the power button it booted up again.
I've only found this was on the latest firmware.
Owned: Nokia 3510i, Nokia 3120, Nokia 6230i, Nokia 6233, Nokia N73, Nokia N82.
Current: Nokia N900!

N73 turns itself off when using real tone

Similar Messages

Maybe you are looking for