N73 update firmware

hi all,
i just want to find out any firmware update for my n73.
My phone details are given below. pls reply me
V3.0638.0.0.1 / 30-10-2006 / RM-133 /
Nokia N73(08) / code: 0529785

You could, but you really want to think about it if you actually want to.
Internet Edition is only available in APAC (Asian Pacific) meaning you only get asian/chinese/english language. You would also have to modify your product code (which voids your warranty) and if something goes wrong during updating you're really screwed (won't be covered by warranty) unless you can flash 'back' which can be done but is risky.
Also if the update DOES work but you're not happy with the new firmware (read about issues when updating to ME/Internet editions with some people) you can't easily flash it back. Same as above, it IS possible but not easy.
Basically, unless you're very comfortable with the flashing of phones and screwing up your phone is not THAT big an issue to you I would stay away from it...

Similar Messages

  • Nokia N73 Update/Firmware

    Ok, im from the uk and have recently purchased a phone on the THREE network, on contract so its locked onto their Software...
    They offer free msn messenger which you can download from free online wap services...
    Now... I have the N73 Music edition firmware(v3)
    But msn messenger is not there, I have tried to download msn messenger again but it says when its downloaded certificate error, anyone else had this problem??
    How can i fix this, will it have to be sent back to three to downgrade?Message Edited by orinoco on 24-Nov-2006
    09:36 AM

    Install free alternatives, like eMSN.jar, QuickIM.jar or Hier.sis.

  • Where is my n73 new firmware update

    i heard that new firmware for n73 was released from nokia (V4.0723.2.0.1/06.06.07)and i tried to update my n73 firmware, but my NSU keep telling me that i already install latest firmware and i check on my phone, but that too disappointed that my n73 still not up to date (V3.0704.1.0.1). I want my n73 firmware to be update. It's not fair to users like me.
    I hope nokia will overcome this problem.. I want my n73 firmware to be update.

    Hi rouin - Although Nokia has released an updated firmware for the N73, it will only be for a certain product codes (you can find your product code under your battery compartment).
    If you received your phone as part of a contract then your phone will be tied in to that network operator - e.g. Vodafone, Orange and so on. If this is the case then you will have to wait until they authorise the release of the firmware for the N73 - there's no way around this unfortunately.
    You can see this post for more information :
    /discussions/board/message?board.id=swupdate&message.id=451
    Regards,
    Edward

  • What is new in Nokia 6500s update firmware ver. 6....

    What is new in Nokia 6500s update firmware ver. 6.6?
    Nokia N73. V 4.0812.4.0.1 Code: 0529786
    Nokia 6500 Slide V6.6 code: 0556234

    After updating mine yesterday...da screen refreshes or so flickers every say 5 seconds...plz any help
    i have reinstalled it three times... ..still no solution
    Message Edited by prubyholl on 04-Dec-2008 07:20 PM

  • Compass application can't running well after update firmware to 20120726

    my windpad7 can't run compass application well after update firmware to Android_2.3.1_MSI_02_20120726 but it can pointing well if i turn it upside down (face down). i use the same application that running well on earlier firmware and I've try using another typical application and the result is the same,.. anyone experienced it? 

    on my n73 i can go to app manager and reinstall them.
    if u wanna remove it, then reinstall them and uninstall.
    Blackberry Bold

  • New N73 ME firmware 4.0750.31.2.1 not installing

    Just noticed with joy that there is a new firmware for the N73 ME. My product code is 0537289 Euro 1. However when updating, the phone connects fine, software/firmware update downloads fine, but when it goes to the actual update, after a couple of seconds it comes up that update can not be installed.
    I have rebooted phone, computer, removed memory card (not sim card) and still can not update. Can anyone verify that this is not just me. I have updated firmware in the past from this computer. Oh and yes, I have the latest PC Suite and Software updater versions (1.4.23).
    The phone still works ok after failed attempt, just if you wondered

    I had Kaspersky Antivirus installed. Turned off the real time protection and restarted the phone. Now the firmware update installed.
    Strange thing is though that the Antivirus never produced a message that it blocked something.
    Maybe this helps somebody else with the issue

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • I want update firmware 2.9 but apear this message "This software is not supported on your system."

    hi
    I want update firmware .details my system is
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro9,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.5 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
      Boot ROM Version:          MBP91.00D3.B08
      SMC Version (system):          2.2f38
      Serial Number (system):          C1MHQC17DTY3
      Hardware UUID:          EF0C6F81-20AD-50FA-9DD5-C8E084DF8E8C
      Sudden Motion Sensor:
      State:          Enabled
    but when install the last update MacBookProEFIUpdate2.9 i got error like this
    "This software is not supported on your system."
    please help me thanks

    OK, so the firmware is the same as mine, and yet Apple Support offered this EFI and SMC update packages, which should give a message that our computers are updated. 
      However, the update packages fail to run. 
      Did Apple neglect to give the correct update for the mid-2012 issue of MacBook Pro 13-inch?  I have the i7 Intel processor, instead of the i5, and I was sold this unit as having two processors, but the System info only lists a single processor. 
    Is one of the problems with Intel-based MacBook Pro units that the integration wasn't without bugs that cause processor hang when running the OS Lion, even with updates to 10.7.5?
      Shouldn't the EFI and SMC updaters run on these machines as stated in the Apple Support article? 
      What will Apple do for these customers?

  • How to install OS 9.2.1 on G3 with no OS; says needs updated firmware, how?

    I am trying to install OS 9.2.1 in an old G3 which at present has no OS in it.
    The screen says it needs updated firmware to do so. When I try to follow instructions, it tells me the CD is locked, which is obvious since it is an installation CD. Other instructions seem to assume there is already an older OS in the machine to update. Anyone with an idea of how to break this log jam?
    [email protected]

    Hi wmarina !
    Welcome to the Discussions, and Happy Thanksgiving!
    The only G3 that will give you a Firmware Update warning when trying to install OS 9, is a Blue & White G3 tower.......
    If that's what you have, then getting OS 9 onto it is a bit of a Catch-22, Can o' Worms, P.I.T.A., or whatever other favorite sayings you may have for a difficult job........
    "Other instructions seem to assume there is already an older OS in the machine to update."
    Very astute observation, and 100% correct.
    The OS that is assumed to be on the B&W's drive is MINIMUM 8.5.1, and therein lies the Catch-22.....
    A BOOTABLE 8.5.1 Install CD is NOT available as a RETAIL CD........
    The Retail CD is 8.5 install, with the 8.5.1 UPDATER, which is also on the CD.......
    The 2nd part of this problem is that the Firmware Updater (which is on the OS9.1 CD) MUST be run from the booted Hard Drive with 8.5.1 on it.........
    Your options are:
    1. Find a set of the ORIGINAL SOFTWARE CDs that shipped with a Blue & White G3, and install the original OS from there.........
    2. Do what I had to do. Take out the Hard Drive and move it to an older Mac (i.e. Beige), and install OS 8.5 on it, and update it to 8.5.1, take the Hard Drive out and re-install it into the B&W again, boot to it, and do the Firmware update at that time.........
    Note that NO Mac can boot to an EARLIER version OS than it shipped with when new, which is why you will have to use a beige to install 8.5.1 to that hard drive........
    As a secondary note, to avoid more problems, get a new Pram battery (1/2 AA 3.6V).
    Available at any Radio Shack.
    Good Luck !
    Kevin
    G3 1.1Ghz B&W, Digital Audio G4 Dual 533,G3Beige,8600/G4-800, 7600/G3-300, 6200 Ret.   Mac OS X (10.4.3)   ATI RADEON MEs: 7000, 9200, 9800, nVidia ? 64MB

  • Can not update firmware on Officejet Pro 8610

    Can't update firmware on Officejet Pro 8610, Hp update site shows available firmware update needed, disabled firewall, shut off wireless, run program, window for update appears, but checkbox greyed out. I've talked to HP Tech, He was positive newer firmware was available, I've tried starting in safe mode w/networking, disabled, MS Security essentials turned off,etc. Have Dell Dimension, excellent running, Windows 7 Home Premium, Xfinity cable network modem (very fast), I'm getting frustrated.
    Does anybody have a suggestion? Thanks, Jim

    Hi @jwhite8150 , and welcome to the HP Forums!
    I see you're having issues updating your firmware.  I would like to help!
    Before we start I have a request. 
    Press Setup on the front panel of the printer, and select Reports.  In the reports menu select Print Status report.  On that report, please let me know what firmware version is listed.
    Thanks!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

    External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

    Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
    Does the drive now appear in finder..
    If not reboot both drive and the AE.. it should now appear.
    If it doesn't work with direct connection try a powered hub.. that can help.

  • Kernel panics after updating firmware

    Kernel panics began at startup after updating firmware about 2 weeks ago. Went through the KP repair routines prescribed by thexlab.com. Found no problems with the hard drive, permissions, etc. Did erase and install (with Leopard OS dvd bought from best buy) after archiving files to external HD and was able to startup normally. Updated OS to 10.5.7, along with several other items (iTunes was one of them). Put previously copied files (mostly iTunes). The computer ran successfully for a few days and then started getting KP's at startup again. Did another erase and install. Had success. Loaded iLife and Office 08 to have something to try to test the machine with. Shut down the computer and restarted successfully. I had forgotten I had not tested the RAM so downloaded Memtest. Tried to run it but the computer froze half way through the test. Did a hard shutdown, then tried to restart normally and got the KP again at startup. Here is the panic log:
    Sun Jul 5 18:24:05 2009
    panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
    EAX: 0x43ec9630, EBX: 0x049cf804, ECX: 0x04e15800, EDX: 0x00000000
    CR2: 0x000000b8, EBP: 0x43ec9668, ESI: 0x00000000, EDI: 0xffffffff
    EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04e10010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x43ec9408 : 0x12b0e1 (0x4555b4 0x43ec943c 0x133238 0x0)
    0x43ec9458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
    0x43ec9538 : 0x19e517 (0x43ec9550 0x1 0x43ec9668 0xb10612)
    0x43ec9548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
    0x43ec9668 : 0xb1753d (0xc1d00005 0x1000000 0x1000003 0x40)
    0x43ec96c8 : 0xb0bfc0 (0x43ec9858 0x43ec9808 0x0 0xafe41c)
    0x43ec9828 : 0xb00132 (0x0 0x600d600d 0x7027 0x43ec9858)
    0x43ec98e8 : 0xca58de (0xc1d00005 0x1000000 0x1000003 0x40)
    0x43ec9918 : 0xcae273 (0x2436f000 0x1000000 0x88100090 0x3e)
    0x43ecb8a8 : 0xc92d8a (0x2436f000 0x1000000 0x15 0x2436f01c)
    0x43ecb9a8 : 0xafa472 (0x2436f000 0x0 0x43ecbab2 0x80)
    0x43ecba08 : 0xaf15a5 (0x48af000 0x0 0x43ecbab2 0x80)
    0x43ecbb38 : 0xaf2d74 (0x48af000 0xaf6358 0x43ecbbec 0x4)
    0x43ecbc08 : 0xade139 (0x48af000 0x1 0x0 0x13)
    0x43ecbc68 : 0xad7940 (0x48af000 0x2407 0x43ecbd2c 0x48af000)
    0x43ecbc98 : 0x40c515 (0x48af000 0x4a40130 0x4a40130 0x0)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9A581
    Kernel version:
    Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F42388C8)
    Was able to start up in safe mode and ran memtest again, this time having success and finding no RAM problems from the single run of Memtest. Shut down and restarted successfully.
    Turned the computer off for the night and just restarted it successfully about 24 hours later, and it is still running.
    I presently have about 130GB of free space on my HD. I don't have any peripherals attached. The computer gets fairly warm at times but certainly not excessively.
    Can anyone decipher my KP log and see if there is a fixable problem?
    thanks in advance,
    Pat Leopard

    Had another kernel panic at startup this morning. I had the Leopard DVD in and was contemplating another erase and install, but tried to back out of it. On restart the KP happened. Here is the log:
    Wed Jul 8 10:44:41 2009
    panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
    EAX: 0x2ebb1630, EBX: 0x04e20404, ECX: 0x04de7000, EDX: 0x00000000
    CR2: 0x000000b8, EBP: 0x2ebb1668, ESI: 0x00000000, EDI: 0xffffffff
    EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04de0010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2ebb1408 : 0x12b0e1 (0x4555b4 0x2ebb143c 0x133238 0x0)
    0x2ebb1458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
    0x2ebb1538 : 0x19e517 (0x2ebb1550 0x1 0x2ebb1668 0xb10612)
    0x2ebb1548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
    0x2ebb1668 : 0xb1753d (0xc1d00001 0x1000000 0x1000003 0x40)
    0x2ebb16c8 : 0xb0bfc0 (0x2ebb1858 0x2ebb1808 0x0 0xafe41c)
    0x2ebb1828 : 0xb00132 (0x0 0x600d600d 0x7027 0x2ebb1858)
    0x2ebb18e8 : 0xca58de (0xc1d00001 0x1000000 0x1000003 0x40)
    0x2ebb1918 : 0xcae273 (0x2435f000 0x1000000 0x88100090 0x3e)
    0x2ebb38a8 : 0xc92d8a (0x2435f000 0x1000000 0x15 0x2435f01c)
    0x2ebb39a8 : 0xafa472 (0x2435f000 0x0 0x2ebb3ab2 0x80)
    0x2ebb3a08 : 0xaf15a5 (0x4837800 0x0 0x2ebb3ab2 0x80)
    0x2ebb3b38 : 0xaf2d74 (0x4837800 0xaf6358 0x2ebb3bec 0x4)
    0x2ebb3c08 : 0xade139 (0x4837800 0x1 0x0 0x13)
    0x2ebb3c68 : 0xad7940 (0x4837800 0x2407 0x2ebb3d2c 0x4837800)
    0x2ebb3c98 : 0x40c515 (0x4837800 0x4a0bc40 0x4a0bc40 0x0)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9A581
    Kernel version:
    Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F42388C8)
    I left the computer alone for a while and when I hit the power button it came right up.
    I'm going to pull RAM modules per your suggestion.
    thanks,
    Pat Leopard

  • Stuck with gray screen during update (firmware)

    Today I completed the routine software update (firmware) on my macbook pro. During the update all I can see is a gray screen with no progress bar. It appears "stuck". Please advise!

    See https://discussions.apple.com/message/24334963#24334963
    Hold power button down 5-10 seconds. It will restart and all should be fine.

  • Updated firmware of Creative Zen Nano P

    Questions?. Why do i need to download new updated firmware every now and then?2. WHat is the disadvantages if i don't download new updated firmware every now and then?3. What is the difference of the updated firmwares found in creative download section and the DAPJukebox website?4. Which is has the best quality firmwares, the creative download section or the DAPJukebox website?thanks?

    All software regardless how good the quality control will have bugs.
    Firmware is just software that is stored in the hardware on your device. New firmware is often released by a company to fix bugs or possibly add functionality that could enhance the use of a device.
    But it is also possible that a new firmware update might add a new bug or two. (a rare occurance)?Sometimes (unfortunatly) new firmware upgrades can end up removing a feature.
    For example it appears creative was under some legal pressure to remove the radio recording feature from there devices. On the ZVM, it was removed in one firmware upgrade, then in a later one it was replaced. On the Zen Nano Plus it was removed in the latest firmware upgrade (which is actually a bit old in calendar terms right now), but they have not released a later version that adds the recording back in. So in the case o fthe Zen Nano Plus, an firmware upgrade could be considered a bad thing.
    If you require and use the radio recording functionality, then upgrading to the latest version (to fix some minor bugs) could end up crippling some of the functionality of the device. Normally when new firmware is released, there are notes detailing changes in functionality, bugs fixed, and even bugs that still exist. By looking at the information you can determine if you want/need to upgrade to the latest firmware.
    Since there is some inherent risk in upgrading a firmware, most people don't upgrade firmware unless they need the new functionality or are experiencing a bug of some kind on the device that the new firmware might possibly remedy.

  • I have Lion on my 13" pro and have kept it up to date. Today I had a message about the need to update firmware. I pressed restart and there was language about the screen ging gray. I think it said for a few minutes.  It has been 3 hrs. is this a problem?.

    I got an alert to update firmware. When I click for restart a message the screen would gray and and it might ake a few minutes.  That was about three hours ago and it is still gray and sitting there. Is this to be expected? What could/should I do?  I am typing this on an ipad because the Macboob Pro is currently useless.

    With Firmware updates, Apple will usually offer instructions to complete the update, since they require an additional step to complete. It sounds like you haven't finished the Firmware update completely.
    Since it's your computer and investment, I wouldn't risk it and would visit your local Apple Store and let them solve the problem. In the meantime, read this link from Apple:
    http://support.apple.com/kb/HT1557?viewlocale=en_US&locale=en_US
    ...to bring you up to date on the procedure.

Maybe you are looking for