N73 very slow, is this right?

Had my N73 about a week now, when i hot the menu button theres a delayed reaction ans also, when opening applications and especially messages it takes a while to do it. And when i recieve a message when i hit read it sort of laggs a bit then shows the message, i dont really like the laggyness of naviagtion on it, quite dissapointed with this aspect. My version is: V3.0638.0.0.1 i believe this to be the latest version.
Does anyone else experience the same thing. Comapred to my old samsung where everything happends as soon as you click the buttons, its not half as good.
any other opinions?

2GB is way too big for me.i'm using 512MB and my nokia is very slow.I think no phone needs 2GB.Well exept phones with 4-5GB or more can handle bigger MMC-s because their processor is faster(i think so).Mine is with 220 MHz procesor and believe me it's VERY slow.Let's just say that the Images opening time is more than 25 seconds.
And about the firmware updates.I don't think there will be any difference even if you have updated the latest because just the processor is slow.
Bigger phone memory - faster processor for good performance
Bling_Bulgaria
Bling_Bulgaria.If you find my answers helpful click the Kudos button. Nokia 3300 > 6681;N82,V31.0.016,RM-313

Similar Messages

3 year old iMac 24 running OS10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem?

3 year old iMac 24 running OS 10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem? Does not happen on MacBookpro only on iMac.

Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

My 2012 Macbook pro is running very slow from this week

Started from the day before yesterday, my Macbook runs very slow. A single click on anything can cause me to wait its finish running. Even when typing
Here is the result
EtreCheck version: 2.1 (101)
Report generated December 4, 2014 at 11:02:03 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:16:59
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (377.07 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
有道词典 Application (/Applications/有道词典.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.12 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
AdobePDFViewer: Version: 10.1.12 [Support]
Mathematica: Version: 9.0.1.4092152 [Support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
userinternetplugins ℹ️
RealPlayer Plugin: Version: Unknown [Support]
aliedit: Version: 1.0 - SDK 10.6 [Support]
aThunderPlugIn: Version: Unknown
Safari Extensions: ℹ️
Extensions: No such file or directory
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      5% WindowServer
      2% hidd
      1% M-fM^\M^IM-iM^AM^SM-hM-/M^MM-eM^EM-8
      0% Finder
      0% Dock
Top Processes by Memory: ℹ️
172 MB softwareupdated
112 MB ocspd
103 MB com.apple.WebKit.WebContent
86 MB Safari
86 MB Finder
Virtual Memory Information: ℹ️
3.51 GB Free RAM
3.52 GB Active RAM
597 MB Inactive RAM
965 MB Wired RAM
1.50 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 4, 2014, 10:21:17 AM QQ_2014-12-04-102117_JIAYIs-MacBook-Pro.hang
Dec 4, 2014, 09:47:29 AM Self test - passed
Dec 3, 2014, 11:23:25 AM com.apple.WebKit.WebContent_2014-12-03-112325_JIAYIs-MacBook-Pro.crash

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Ios8 Update in my Iphone 4S is very slow. This is really made me think to go for another phone except IOS.

Ios8 Update in my Iphone 4S is very slow.
I have updated IOS8 in my Iphone 4S. from the time i have updated it, it is very slow.
Please have the slow issues fixed and relaese a update.
I strongly recommend not to go for IOS8.

iOS 6 works just fine on my 4S and everyone else's that I know.
What have you done to troubleshoot your issue?
Have you taken the basic troubleshooting steps clearly outlined in the iPhone User guide?

My macbook pro is running very slow, like a *right click* can take 30 seconds to registar, My macbook pro is running very slow, like a *right click* can take 30 seconds to register

Well thats basicly it, I have a macbook pro 13-inch, Late 2011
Processor 2.8 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Serial Number C02H92BJDV14
Software Mac OS X Lion 10.7.5 (11G63)
I have no idea why it is slow, i have 25g free still and download from shared sources
Edward

You don't need ANY of this external drive software, you should uninstall them.
/System/Library/Extensions
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) [Support]
[not loaded] com.wdc.driver.1394HP (1.0.9) [Support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Support]
[not loaded] jp.co.panasonic.driver.p2drivefamily (2.4.0 - SDK 10.6) [Support]
Thats a start. Why are you using Chrome? Of the three main browsers Chrome is probably the worst. Try Safari or Firefox. I'm not familiar with GlimmerBlocker or BackBlaze, you might try disabling them to see if things improve. I don't see any other software related issues.
Edit: FlashPlayer is out of date. Update that by entering www.adobe.com into your browsers address bar and follow the links ro FP. Never click on a link to update software.....too many redirects to tainted installers.

When i installed yosemite on my mac book it runs very slow, is this normal ?

After installing OS X yosemite on my mac book it runs extremely slow. Is this normal ?

Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.

I have a macbookpro may 2010 with Intel core 2 duo processor can i upgrade to osx mountail lion ,i have doubts that the macbook becomes very slow on this processor

macbook pro 2010 with 2.4 Ghz intel core 2 duo can i upgrade to mountaion lion ,i have doubts that it becomes very slow

Welcome to the Support Commuities. See under Supported Models here:
OS X Mountain Lion Technical Specifications
...Although your MacBook Pro is supported, it may be advisable to wait until OS X 10.8.1 or 10.8.2 in order to avoid the possibility that your Mac slows down due to bugs in 10.8.0.

N73 very slow response after minute of idle

After updating the firmware it take too long to open the phone from standby mode.
Why Nokia had limit the MMS to 300KB only.
Will Nokia manufacturer this a serious note for them to upgrade the firmware to more stable and reliable to use this kind of cell phone?

There are numerous software versions for different regions, network operators etc., so it is difficult to comment on your speed issue without knowing what is the version that you have updated to.
300Kb is a typical limit for MMS, even at network level. Some more recent phones like the N82 could theoretically handle larger MMS messages, but in practice most networks still place a 300Kb limit so what the phone is capable of is irrelevant. You should note that the limit of the receiving phone will also affect this, for example if you sent a 300Kb MMS from your N73 to a friend who owned a 6020, they would not receive it because their phone accepts 100Kb maximum. MMS is a system created only for small messages, and will eventually be completely redundant now that most phones have GPRS/3G/WLAN and e-mail capability.

Android app very slow - is this just something to put up with?

Hi,
We have created an Android version of an existing iPad dps app & folio, and even though we have removed features unsupported by Android, it still runs really (painfully) slowly compared to iPad.
We've seen discussions that this is a general issue with the Air-based Android viewer app, and there's little that can be done. Is this so?
We've also seen rumours that there is a new android viewer app due at some point soon, that will sort out the performance. Is this so? It would be useful to know anticipated release date so we can communicate this to clients - it will help appease them.
Many thanks,
Paul

Hi Neil, good to hear. Do you have any plans on when we should be hearing more about the native android viewer? Not sure if you have read this ( http://forums.adobe.com/message/5773513) , but new Android tablets with x86 based processors are performing very poorly compared to ARM based Android devices (and iPad). We have customers who are getting very impatient and we dont know what to tell them. Any guidance or advice/timelines Adobe can provide would be very helpful to calm customer concerns.

New connection very slow - is this normal ?

Hi
I just had option 3 broadband installed today but seem to be stuck on an IP profile of 2 Mbps. It was supposed to be 6-8, probably 7 Mbps.
The line is clean and I tried the quiet line and it was very quiet.
I understand there's a 10 day bedding in period, but wouldn't it start high and go down from there ?
How long will I have to wait at 2 Mbps ?
Cheers
Connection Information
Line state:
Connected
Connection time:
0 days, 06:33:40
Downstream:
7.938 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Fast
Noise margin (Down/Up):
13.9 dB / 30.0 dB
Line attenuation (Down/Up):
21.2 dB / 11.0 dB
Output power (Down/Up):
19.9 dBm / 11.9 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
2 / 0

2mb is the starting point. You need to stay connected 24/7 for next 10 days as that is initial training period. if still 2mb after training then come back to the forum. Bt will not help during training period
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I have a new iPad with retina display it seems to get very hot is this right

Should the iPad get very hot ?

I would recomend turning down your brightness of your screen. It should be put to to 50-60% and now the iPadwill not get warm. Still you can feel the heat but at least it does not get as warm as using 100% brightness.

*SOLVED* - 2D draw very slow, intel / fglrx Xorg driver

Hey all,
My very first support post to the forums
I have an issue on a few computers whereby the 2D drawing in X is very slow. This happens on my laptop with Intel vga and also on a desktop when using the proprietary fglrx driver. I did not have this problem a few months ago when using stable. At that time, I installed testing and discovered the problem, so I went back to stable. Some time later an update to Xorg came into stable and since then the problem is now in the that tree also.
I thought it might be the new GEM stuff for the Intel driver, so I installed the 2.6.28 kernel when it was released - it did not solve the problem. Installing an NVIDIA card into the desktop box does solves the problem (can't do that for my laptop!). Because it's happening with the intel and fglrx drivers, but not with NVIDIA, I think it might be a problem with some Xorg component that the NVIDIA driver performs itself? But I've no idea..
Essentially, I'm using wmii as my desktop, which is a tiled window manager. Creating a new terminal window, switching between them and closing them all is very slow (taking a second or more), when it should be pretty much instantaneous.
When doing these things, Xorg takes up 90% CPU usage. By comparison, on the same laptop under Debian it only uses 10% CPU (and the problem does not exist).
I have created two desktop screencasts of what I mean. In the videos I am quickly opening a bunch of xterms and then later holding down 'switch between terminals', then holding down 'close terminal'. I run htop to show the CPU usage.
Arch, 4.9 MB, OGV - http://christophersmart.com/videos/archlinux-wmii.ogv
Debian, 5.7 MB, OGV- http://christophersmart.com/videos/debian-wmii.ogv
Any ideas?
Thanks a bunch!
Chris
Edit: FYI, the desktop has an Intel Core2 CPU with 8GB RAM and 2 x WD Raptor drives in RAID 0. With an ATI card, wmii is unusable.
Last edited by csmart (2009-01-17 00:19:57)

Well I first discovered the problem with the 'intel' driver and later when I set up Arch Linux on a desktop I was met with the same issue. I think it might be some part of Xorg that they both share, but it's not just a problem with the catalyst driver.. unfortunately

My MacBook Pro is running very slow. I've run repair permissions without positive result. Does anyone have any ideas?

My MacBook Pro (2010) is runnign very slow. This came on all of a sudden. It opens, closes, reboots, etc., all much slower than ever before. I have used the repair disk permissions without any positive result. Does anyone have any ideas?

First, back up all data immediately, as your boot drive might be failing.
Take these steps when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

In Adobe Reader (11.0) the typing is very slow when I insert sticky notes.

I bought a new laptop and I just installed the latest version of Adobe Reader.
When I insert sticky notes, typing is very slow. This doesn't happen with the
other program. I've uninstalled and reinstalled. I still have the same problem.

This phenomenon can happen with PDF files that have errors in them. Adobe Reader or Acrobat may be able to fix these errors, but if you close the application, it will ask to save the corrected file. If you save it once, that should no longer occur when you open it again.
This is just one explanation, but it doesn't explain why that happens with every PDF you have.
Test: does it also happen with a PDF that is not supposed to contain any errors: http://helpx.adobe.com/pdf/adobe_reader_reference.pdf ?

N73 very slow, is this right?

Similar Messages

Maybe you are looking for