N73 with arabic support

I made update for the software of my mobile and after that i found the arabic language not any more exist can any one help me to retrive the arabic language

Search for "Arabic" here, and you will find posts explaining why it happened, and what you might or should do:
/discussions/search?advanced=true

Similar Messages

English with Arabic support option in installation ?!

how will the English with Arabic support option in installation works,
I try it but no new options to support ME shows up in AE interface or preferences!

What is it that you're expecting? After Effects has no special features for Arabic, and no part of After Effects is localized into Arabic.

Update N73 with Arabic Language

Hi all,
This is the first time for me on this Nokia discussion board.
My asking about how to update my phone N73 languages with Arabic language which is not included into the original setting for the phone software, in other words how to add the Arabic language to N73 phone?
Need a quick reply
Thanks in advance
Tamer

Normally, phones are provided with languages for the country or region where it was intended to be sold, but sometimes the retail trade moves phones about before they are sold to the public, so it is possible that you have a phone that was not intended for an Arabic country.
A Nokia service point may be able to add the arabic language pack.

Adobe Indesign CC English (with Arabic support)

Hello,
I am having trouble with the CC version. When I was using the middle eastern version CS5 from Winsoft, I was able to change all the arabic at once (into bold for instance), without changing the latin text. Is there a way to do that in the CC version?
Thanks a lot

You can do this with find/change pretty easily. Set the Find format attributes to Language: Arabic under the Advanced Character Format tab, assuming you've actually assigned Arabic language to your arabic text. If not, I think you can do it by specifying a unicode range, but I can't tell you the correct range to use.

From Where i can download Adobe Illustrator CS6 middle eastern edition with Arabic support?

I downloaded a trial for testing before purchasing from .../mena_en products page, it doesnt have Arabic in it... i need a specific version which enables me to write Arabic.

If you're looking for a direct download, also have a look at thread: http://forums.adobe.com/message/4434170#4434170. Specifically, posts 9 and 10.
Cheers,
David

Very Urgent Help needed - Arabic support in Forms6i& reports6i

Hi,
Its a very very very urgent requirement.
How to Provide the arabic support in forms .
I am working on Windows Xp operating system.
1. How to Configure the Windows XP Operating system to provide arabic support?
In Design time i want to use English and during runtime i should be able to toggle beteen English and Arabic for Entering the data.Arabic data should be captured in seperate fields.
1. How to configure the oracle 8i/9i databases to provide both arabic(Saudi Arabia) and english? what characterset i need to
choose for saudi arabic?
2.How to install forms & Reports with arabic support?
3.How to dispaly the data in both english and arabic in forms and reports during runtime?
I will be really greatful if u are able to provide me that help and my advanced thanks to ur help.This very
very urgent.
Regds,
B.Prasad
[email protected]

Badma,
1. How to Configure the Windows XP Operating system to
provide arabic support?Please go to "Regional and Language Options" from the Control Panel. In the "Standards and formats" group of the "Regional Opitons" tab, select "Arabic (Saudi Arabia)". In the "Language for non-Unicode programs" group of the "Advanced" tab, select "Arabic (Saudi Arabia)", then restart Windows. If "Arabic (Saudi Arabia)" is not listed, then please go to the "Langauges" tab and make sure the "Install files for complex script and right-to-left languages (including Thai)" in the "Supplemental language support" group is checked.
1. How to configure the oracle 8i/9i databases to provide
both arabic and english? what characterset i need to
choose for saudi arabic?If you're not planning to support other languages than Arabic and English (7-bit), AR8MSWIN1256 should work for you. If you're planning to support other languages in the future, I would recommend you to create your database in UTF8 (Forms/Reports 6i doesn't work with AL32UTF8 database). Please note Arabic characters are represented in 2 bytes in UTF8 while they are 1 byte in AR8MSWIN1256.
2.How to install forms & Reports with arabic support?If you need Arabic translation, then please select Arabic when you're asked the language(s) to install. Otherwise, notmal Forms/Reports installation should work for you.
3.How to dispaly the data in both english and arabic in
forms and reports?Set your NLS_LANG to ARABIC_SAUDI ARABIA.AR8MSWIN1256.
Hope this helps.
Regards,
- Makoto

I need Arabic support for my nokia n 73 music edit...

Hello ...
I have purchased new nokia n 73 music edition recently ...
I have purchased in india ...
My mobile's firmware version is 3.0705.1.0.31 ...
When i go for phone language ... i am getting Indonesia, Malaysia, Pilipino and english ...
I need Arabic language support ... please some one help me in this regard ... i shall be much helpful to him ...
I am urgently in need of it ... PLEASE

Nokia phones do not have/support user-installable "language packs".
You could ask if a local Nokia repair center could install a phone software (firmware) with Arabic support: http://www.nokia.com/repair
Otherwise your alternatives may require the use of illegally distributed, hacked software and firmware files, and the discussion is best to leave right there (here).

N97 Arabic support

Hello there,
I just bought a new N97 with Arabic support and Arabic keyboard. when I bought it, there were arabic langauge and so many other langaugies available. After I made a software update, I've lost all those langaugesm except Auto, English and one other langauge.
I need some one to assist me restoring those langauges, please.
By the way, I did a factory restore and nothing happend.
Please, I need sulotions.
thanks for everybody
Yumnak

@alzaly: If you look above you will see that synth_fg has already posted the answer to this
You will need to visit a Nokia care point, tell them what happened and ask if they could install your lanugage on it again.

Preimiere CC, How to activate Arabic support?

I installed Premiere CC with Arabic support but it's not supporting typing in Arabic. How to fix or activate that -in case it's a feature- ?

Photo shop CC 2014 does not need serial number,You have purchased Creative Cloud pour la Photo (un an) which is active & has no billing issues.
Please refer to Creative Cloud applications ask for serial number
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
Windows:
   In windows 7 navigate to following location:
     /windows/system32/drivers/etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
Mac:
   1. Please click on "Go" and navigate to /private/etc
   2. Open "hosts" file and check out for any entries for Adobe.com
   3. Remove the entries and save the file
   4. try again launching any product from CC
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.
Please let us know if it worked.
Regards,
Rajshree

Hw can i get arabic support in oracleAS using jstl: showing '?????' symbols

Hello All,
I am using OracleAS for portal deployment and portlets UI constructed by using jstl.
i have used spring portlet jstl for the jsp pages.
when i am trying to change the language, it is showing '?????' symbols.
I have used correct unicode. i tested in pluto portal server. when i deployed in oracleAS,
for english not a problem. for arabic it is showing as '????'.
i have used this code to get arabic in pluto. same code i used. i am getting error.
<c:set target="${pageContext.response}" property="characterEncoding" value="UTF-8" />
<fmt:setLocale value="ar" />
<fmt:requestEncoding value="UTF-8" />
i know it is not setting charector encoding.
i tried some other too like:
<head>
<META http-equiv="Content-Type" content="text/html;charset=UTF-8"/>
</head>
and
<%@ page pageEncoding="UTF-8" %>
No improvement. please help me out of this.
how can i get arabic support in oracle AS by using jstl?
Thanks,
Arun

Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
Regards.

Frustrated - Multiple issues with Fios TV/DVR - need advice on dealing with tech support

I have been a Verizon Fios customer since Feb. 20th (all of two and a half weeks). I signed up for my bundle on-line around 11am on the 20th, and had a technician out for install within a few hours on the SAME day. I thought that was impressive - and I was looking forward to having a more reliable and fast internet connection than I had been experiencing with Brighthouse.
The technician who installed was very friendly, and although he had some issues (apparently, there was a Verizon box in this house before us, but someone ripped it off the wall, so they had to run new wire all the way out to the street) the install went pretty quickly and smoothly.
The first few days went along without a problem, and the internet was great. Some of the functionality of the DVR was less than I'd hoped for, but some of the other features were great. I had a glitch trying to set up my online account, but I used the online chat feature to work with tech support and she was able to correct the issue. We noticed a couple times in the evenings that the TV would pixelate - but it only happened a few times and was very brief.
On Sunday the 26th, our real issues started. The live TV started freezing, then having a liquid-like pixelation problem, sometimes no sound. We tried to watch a recorded show from our DVR list and received error messages stating that we didn't have DVR. We called Verizon tech support and a very rude person reset the box several times and apparently even reinitialized the box and the result was that the box wouldn't even turn on anymore. He said that he'd have a new box shipped out to us and that it would arrive by Tuesday or Wednesday. My husband got on the phone at that point and suggested to him that since we were brand new customers (less than a week) and that since we had service installed on the very same day that we ordered it online, that certainly they could have someone bring us a new box on Monday morning. The technician told us that he would transfer us to the billing department because we could probably just cancel the service. We were both dumbfounded. Especially considering that he had been rude from the minute he took our call, and while we were obviously frustrated, we were never rude. We were eventually transferred to someone in billing who said she had never heard of such a thing and that she could not help us unless we wanted to cancel. While this was going on, I had unplugged the box again, let it sit for several minutes, then plugged it back in - and the tv worked. And the DVR worked. We assumed that maybe something the tech support guy did had worked after all. Well, it worked until the next morning. We had error messages saying we had no DVR. A reboot of the box worked again. After work, in the evening, it turned out that scheduled shows didn't record. So, we called tech support again and asked for our new box. We were told we'd have it by Thursday.
New box arrived Thursday and we set it up that evening. Went through trying to get all of our recordings set up again and finally sat down to watch tv. I switched to Showtime (which we are subscribed to in our package) and received an error that the channel was not available, press B to troubleshoot or call tech support with this code. Pressed B, went through the steps and the channel came back. Then, proceeded on to HBO, also part of our subscription - and we received the same error. We pressed B and this time going through the steps did NOT correct - so we called tech support. After working with the girl for over an hour, she finally determined that we needed to be switched to billing to have them remove our HBO package and then put it back on and that should correct the problem. So, while we were waiting for billing to come on the line, we started flipping channels again. Now, channels that had previously worked were now showing the error that the channel was unavailable - even non HD, non premium channels. When the billing girl got on the phone, she said there was really nothing she could do with that being the case and that downgrading our package and re-upgrading it would do nothing - that we needed technical support. She got us on the line with a different tech support person who said that we were obviously having signal related issues and that we needed a tech to come out to look at the wiring. He scheduled an appointment for us for Friday. That call took over 2 hours.
On Friday, the tech came out and spent time checking all of the wires coming in to the house - he said we had multiple splitters on lines that didn't need splitters and that this was likely causing a signal disruption and was probably the cause of the failure on both boxes. He removed some of the splitters and apparently streamlined some of the wiring. We still had the original box and the new box. He hooked up each box and they both worked - all of our premium channels worked, DVR was good, etc. We boxed up the old box to send back, kept the new box and had tv that worked just fine for a few hours... then we started having the channel not available issues again. And, now - we were also getting messages saying that we weren't subscribed to a channel - and this would range from HBO all the way to a non HD standard tv channel. A reboot will work and restore function - for a while. However - scheduled shows aren't recording - or record for 7 seconds and stop. Or record for a while, then have a 20 minute gap in the middle where it's frozen, etc. This has been going on since a few hours after the technician left Friday evening. And, I have to say - when the tech left Friday - everhything seemed fine. He had tested the signal strength - seemed completely thorough and was very nice. I don't think he could have known, at that time, that the problem wasn't fixed.
We have not called back to tech support yet. We're busy with our work and our lives and we're also frustrated. I know it will take another several hours and don't have much faith that there is any resolution. It seems to me that we probably need the whole house completely rewired - brand new - start over. I'm thinking there's a bad wire in there somewhere.
This morning with my coffee before work, I tried to watch a tv show in my DVR list that apparently didn't record properly - no surprise (it froze and skipped over half the show). So, I went to On Demand and found the show. (Without Bay News 9, I'm kind of lost with morning coffee, so I need a show of some kind) It started to play and was going along just fine, till I received a CableCARD (tm) Pairing Information is not available message. I tried the auto fix in the menu, rebooted, etc. It worked for a few minutes, then stopped again. At one point, I got an error saying the set top box lost video due to a network connection failure. Great, does that mean my internet is going bad too?? While looking around in the menu function, I clicked on the self diagnostics feature. It filled in all the information, as I'd seen it do before - except when it got to the package description. This time, instead of Ultimate HD, HBO, VOD, etc., etc (like I'd seen before). it told me that my package is: Arabic, Armenian, ART (Arabic), Extreme HD, HBO, Prime & Ultimate HD, Prime HD, RA, RAI (Italian), etc., etc. Huh??? Really???
So, I'm not sure now what the deal is - would a signal issue cause my subscription package to change? Do I get on the phone with someone at tech support for another few hours? Are they going to send yet another box? Are they going to come re-wire the whole house? Is it worth it? This is really ridiculous. Do I cancel and go back to Brighthouse with my tail between my legs? At least with them, I knew that my internet connection would be wicked slow at certain times of the day, but at least I knew it was coming and could expect it - and I could at least count on my tv and dvr recording my shows.
When I logged into verizon to vent on this forum, my account said that it was unable to access my DVR. When I clicked on manage my DVR, it just says Bad Gateway. Not a great start to our relationship, Verizon.
I really need some advice. Should I stay or should I go? And, if I stay - what is the best way for me to explain this to tech support so they will do the right thing and fix this? And, what is "this" anyway? Bad box, bad wiring?
Any help would be greatly appreciated.

Replied to private message with all information including name, address, phone number and account number. Thank you.

Adobe Reader for Android - Arabic support issue

Dear Support,
I am trying to reach the developer for long time but the email provided is a mailing list which no one else has the right to post to it except their team.
There is a big problem with Arabic words searching in an Arabic PDF file with adobe Reader for android. To search for a word, I have to write the words backward, like instead of "Adobe" I have to write "ebodA" but in Arabic language. I know that your app developers are Indians, but please let an Arabic person show you how he can't search for a word in an Arabic PDF file. Please fix it urgently. it is very important for the Arabic language readers. Thanks for your action.
Software link:
Adobe Reader - Android Apps on Google Play
Best Regards,
Kamal Darwish
Google play developer 234234

Dear Mehwish,
Below is a screen capture of the way that this bug is acting. I hope you fix this bug as soon as possible. By the way in PC version is fine. It is only on Android.

Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun fatha/damma etc. would reverse automatically. Is this a known bug?

Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun + fatha/damma etc. would reverse automatically. Is this a known bug?
Example: عَيْنٌ
would automatically convert to عَيُنْ
Funnily, it doesn't seem to happen here, but it does when entering text in a web interface (using Firefox, font Bayan) and when using Text Edit.
Seems to be a problem of a specific font, as e.g. Arial MS Unicode works fine. Any hints?
Thank you!

Musaafir wrote:
I've no idea how i can even start using arabic vowels on Microsoft Word for Apple
You can't do Arabic on MS Word for Mac. This app has never supported RTL scripts, so you need to use something else. Mellel is best, but Pages 5, TextEdit, Nisus Writer, Open/LibreOffice should work OK.
You switch between languages by using the "flag" menu at the top right of the screen or by using the keyboard shortcuts apple/command plus space. Go to system prefs/keyboard/shortcuts to make sure that is activated.
To see which key does what, you use Keyboard Viewer.
http://support.apple.com/kb/PH13746
You place vowels on letters by typing the key for the vowel after the key for the letter. The vowels are on the option/alt keys, option/alt + a gives you َ

Convert PDF with Arabic content to word /Excel .

I have problem , I plan to buy Adobe acrobat pro for my ORG , The main target to buy it , to convert PDF a Arabic content to word or Excel , I download trial version from Adobe acrobat pro , and when i convert PDF English content it's fine , but when i convert PDF with Arabic content , the result is bad the word become letters and the documents become not readable , Pleas help me cause the main target is convert Arabic PDF to Word .
" the mean problem is when i convert PDF with Arabic content to word the result is bad the document become unreadable .
thanks , wait for replay.

HI,
Adobe Acrobat is a special PDF viewer which is technically develop for the whole world to read any PDF file which a user wants to read. It's basic languages are:
English (US)
English (UK)
Arabic
Italian
Japanese
Spanish
German
But when you going to export the PDF file the arabic language will not support.
Regards,
Florence

Android Adobe Reader - Arabic support

Android Adobe Reader - Arabic support
Dear Support,
I am trying to reach the developer for long time but the email provided is a mailing list which no one else has the right to post to it except their team.
There is a big problem with Arabic words searching in an Arabic PDF file with adobe Reader for android. To search for a word, I have to write the words backward, like instead of "Adobe" I have to write "ebodA" but in Arabic language. I know that your app developers are Indians, but please let an Arabic person show you how he can't search for a word in an Arabic PDF file. Please fix it urgently. it is very important for the Arabic language readers. Thanks for your action.
Software link:
Adobe Reader - Android Apps on Google Play

Please try the Adobe Reader Android forum.
You might find that this is a limitation in either the software or the file. Some Arabic files are written left-to-right internally, and look right but are backwards in each line.

N73 with arabic support

Similar Messages

Maybe you are looking for