N73 with update V4.0726.2.0.1 blue tooth satalite ...

I recently updated to the new software but now I cannot get the bluetooth satalite reciever to work with my tomtom 6, I can pair with it and set it as authorised but it will not work, I check on the status of the satalites and nothing is being recieved . I know that all the equipment is ok as I have another N73 in the family that is not updated and all works ok. I have re installed the software just in case but it will still not work . All the other blue tooth functions seen to be ok I have a headset and that is ok .
can I go back to the old software ?
hope someone can help.
john
Message Edited by cairnnut on 29-Apr-2008 11:10 PM

I've got exactly the same problem. I've just flashed my firmware & now can't get any of my bluetooth devices to work with my phone. I can't even link to PC Suite with bluetooth. What's going on?

Similar Messages

I can not get my Skylanders Portal of Power to sync with my ipad. I turned on Blue Tooth in setting on the ipad and pushed the sync button on the bottom of the portal but it never finds the device. Help

I can not get my Skylanders Portal of Power to sync with my iPad. Blue Tooth is on in the settings and I push the sync button on the bottom of portal but it never finds the device. HELP

Has anyone found a fix to this?

Problems with N73 firmware v 4.0726.2.0.1 update

Hello,
we have updated our N73 with the 4.0726.2.0.1 software update.
Since then, what happens is that reststarting the phone the music player automatically starts, although it is not a music edition.
Furthermore, it does not connect with our bluetooth gps device, which did work before the software update with Nokia maps perfectly.
Can you help?
Product code: 0529799
Thanks a lot in advance.
Best regards,
Dora

I also had the same problem when upgrading to the newest firmware:
Firmware: V 4.0726.2.0.1 26-06-2007 RM-133 Nokia N73 (77.01)
Type: GPS
Vendor: Dell
Model: BT-309
BT version: 1.2 (I think...)
Status: NOT working
Tested with: TOMTOM Navigator 6.010 with gps driver 1.20
When trying to use the Dell BT-309 GPS it keeps trying to get a signal without any success. It finds the GPS, asks for the code, tries to pair off and then loses the signal back and forth forever.
The GPS worked fine with my Nokia 6620 so I know it's got to be something that they jinxed in the new firmware. I can now use my BT stereo headset but lost my GPS ability, which frankly costs much more than the headset and is far more useful to me

HT201412 my new iPhone 5c does not pair with my Mac Pro via blue tooth while Mac Pro do find iPhone 5c and display paired

my new iphone 5c does not pair with Macpro while Macpro display pairing via blue tooth and also my new iphon 5c does search other smart phones while Macpro does so

The iPhone supports only a limited number of profiles and will only pair with a computer for internet sharing (tethering, hotspot if your cellular carrier plan supports that). http://support.apple.com/kb/HT3647

My IPhone 4 blue tooth does not connect with other other mobile phones. Other devices find me. Mine just keeps searching.

Tried sending a friend a photo via blue tooth from my IPhone 4 to his black berry.
His device finds me, but mine does't find his. It just keeps searching.
Am I doing something wrong, pr does IPhone not support this?

blue tooth in iphone is only for headset support means you can only connect a blue tooth head set with your phone thats about it for blue tooth functionality,
You cannot transfer files with other phones or your PC, thats the standard behaviour your phone is fie

I cannot update my n73 with my bluetooth

i dont have a cable i only have bluetooth dongle can i update my n73 with this

No, updates to this phone are only possible using a cable because of the large amount of data that is transferred.
You can find compatible cables on ebay for very low prices.

Problem with updating the PC Updater software

Good evening (from Germany). I have a problem with updating my Nokia Software Updater. I can download the setup and I can execute this. But when the installation starts (0%) a error message appears. It's a problem with Windows Installer but I don't know how to solve the problem. Here is a picture with the exactly error message:
http://img-up.net/?up=Nokia_probES8HJXXg.jpg
I hope somebody knows the anser with this software...
Greetings
OS: Windows XP SP2
Phone: Nokia 3110 classic Firmware: V 5.50
Message Edited by dernamenlose on 24-Apr-2008 08:56 PM

Good morning (from Denmark).
I hve the same problem.
OS: WinXP SP2
Phone: N73.
Greetings.

Gettin latest firmware with updater

I've updated fware with updater and although it said failed after install all seems to be ok. I noticed that my new firmware is the v5.0609.2.0.1/01-03-06 and not the v5.0616.2.0.3 (24-04-2006) version. Should I run the updater again? My previous version before I ran updater was the 2.etc/8/10/05 one(my best guess).
Nokia N95 V11.0.026 17-04-07 RM-159 Vodafone Pay Monthly
XBOX Live Gamertag : Mafustokes

it displays a "A processar" thing when loading, and takes a lot of time to start.
also, i was just informed that v5.0616.2.0.6 is not really a operator dependant update... it's a general update. but if you have a vodafone branded phone, you will not get the update because vodafone did not brand this firmware version yet.
if you do not have a branded vodafone n70, but just a locked one, you still won't get the update... don't ask why!!! i'm still tryin to find out...
Previous phones: 3330, 3410, 3510i, 3200, 6230, Nokia N70, Nokia N73, Nokia N82, Nokia 5500 Sport & Nokia N97
Current: Nokia N900

HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars.

How do i sync my apple id on my iphone with updated icloud id

How do i sync my apple id on my iphone with updated icloud id?

Settings > iCloud.
Delete the account the re-add with new AppleID.

Running Function Module in Background with Update Task is not working

Hello Friends,
I have a "Z" Report Program where I am running this Report in Background using JOB_OPEN, JOB_SUBMIT, JOB_CLOSE. I am calling this in BADI.
In this Report I am calling another Function Module PRICES_POST which is a standard Function Module and in this FM there is another FM 'CKML_UPDATE_MATERIAL_PRICE IN UPDATE TASK'. Now when I am running the BADI these values are not being updated.
Friends I would like to know whether can we run Function Modules which are included with UPDATE TASK as Background Job program?
Kindly help me in providing your valuable suggestions in proceeding further.
Thanks and Regards
Pradeep Goli

Usually the sequence of CALLs in your report should look like
CALL FUNCTION 'CM_F_INITIALIZE'
    EXPORTING
      msg_on_screen = c_x.
CALL FUNCTION 'CKMS_BUFFER_REFRESH_COMPLETE'.
CALL FUNCTION 'PRICES_CHANGE'
    EXPORTING
      actual_bdatj = f_matpr-pp-bdatj
      actual_poper = f_matpr-pp-poper
      bukrs        = p_bukrs
      budat        = p_date
      xblnr        = p_xblnr
    TABLES
      t_matpr      = t_matpr.
READ TABLE t_matpr WITH KEY pp-xerror = ' '
                            TRANSPORTING NO FIELDS.
IF sy-subrc <> 0.
    MESSAGE i046(ckprch).
ELSE.
    CALL FUNCTION 'PRICES_POST'
      EXPORTING
        i_bktxt    = p_bktxt
        bukrs      = p_bukrs
        lis_update = 'X'
      TABLES
        t_matpr    = t_matpr.
ENDIF.
COMMIT WORK.
If you forget the COMMIT-WORK each and every FM called in UPDATE TASK will not be triggered.
Regards,
Raymond

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

Error while installing Visual Studio Express 2013 with Update 4 for Windows Desktop.

When I try to install Visual Studio Express 2013 with Update 4 for Windows Desktop, I
get the error :
Microsoft Visual Studio Express 2013 for Windows Desktop.The form specified for the subject is not one supported or known by the specified trust provider.
Here is what I get when I use the File Checksum Integrity Verifier (NOTE: I couldn't find the SHA Hash for the .iso I downloaded)
// File Checksum Integrity Verifier version 2.05.
8ab9b5ff10da1c33bb3f088331a7c8d8 vs2013.4_dskexp_enu.iso
Here is some Extra Information:
MY OS: Windows Technical Preview x86ANOTHER OS I TRIED INSTALLING VB ON: Windows 7 Ultimate x86
DOWNLOADED ISO FROM: http://www.visualstudio.com/en-us/downloadsLINK: http://download.microsoft.com/download/9/6/4/96442E58-C65C-4122-A956-CCA83EECCD03/vs2013.4_dskexp_ENU.iso
LOG FILE: http://m.uploadedit.com/b044/1421425243589.txtSHA HASH OF THE RECEIVED ISO: 8ab9b5ff10da1c33bb3f088331a7c8d8
====================================================NOTES:
#I ran the setup as an administrator.
#I do not know the SHA Hash for the ISO so please check if it matches the SHA Hash of the actual file.#Please don't recommend to use the Web Installer.#I tried both extracting the ISO and Mounting the ISO to run the Setup.
Thanks. :D

Solved. The ISO is corrupt.
The SHA 1 Hash of the ISO was 57CF28106EA096758AD6AB909F226A3468D95A49
and the downloaded one returned 8ab9b5ff10da1c33bb3f088331a7c8d8.

11.0.10 Update Issue - Problem saving documents - getting message "This document could not be saved. There was a problem reading this document (21)." The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

When trying to install ios5 on my iphone, I get error message that there is a problem with backup, if I continue with update all data on my phone will deleted. I cancelled the update and phone is fine. Anyone know the cause?

When trying to install io5 on my iphone4 I get an error message during the updtae that there is a problem with backup and if I continue with the update, all the data will be deleted from my phone. I cancelled the update and my phone is fne. Has anyone else experience this? What is the cause/solution?
Yhanks!

DON'T DO IT! Read the threads ... there is a MAJOR problem with updating iPhones 3GS/4 to iOS 5.
Take it to the Apple store and ask them to do it.
I repeat: DON'T DO IT YOURSELF.
(Voice of experience.)

N73 with update V4.0726.2.0.1 blue tooth satalite ...

Similar Messages

Maybe you are looking for