N73ME not holding time & Date memory

My N73ME is not holding time & Date memory when switched on again. Anybody can help ?? Tnx

Your nearest Nokia repair center can help (most likely a hardware problem): http://www.nokia.com/repair

Similar Messages

'New' Exchange Battery not holding charge - Date & Time problems

I recently received a 'new' exchange battery for my 2001 500mhz white ibook (OSX 10.3.9, 320ram), as part of the Battery Exchange program, and now I'm having some new problems.
Since I started using the battery a few weeks ago, I've been having constant problems with the Date & Time reseting itself to 1969. I reset to current time, but when I turn on again, it's resets back again. Also, this battery is not holding a charge very well, lasting only about 40 minutes after fully charged (My old battery lasted 2 hours).
I calibrated the battery when i first received it, and I've reset the PMU twice, but no luck.
Thanks in advance for any help & advice....
ibook (500mhz 2001) Mac OS X (10.3.9)

Is there any such program for the G3s?
Only if you replaced your original battery with one from Apple within a certain time frame and within a specific range of serial numbers. Check out the details here:
https://depot.info.apple.com/batteryexchange/index.html

N95 phone will not hold time or date!

HI
Can anyone help me!
My N95, when I power down, then power up I have to enter date and time. so I can not use the alarm clock by powering down!
Is anyone, able to give me information on this?
I have the latest firmware
Mark191968

Sounds like the auxiliary battery in your phones needs replacing. You will need to bring it to your nearest Nokia Care Centre to get ti replaced.
You can find your nearest Nokia Care Centre at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Cmos battery c55d-b5219 not holding date/time

my cmos battery in the satellite c55d-b5219 is not holding the date/time.. cmos batterys are supposed to last for 10 years, not 8 months... does anyone have any troubleshooting things i can do? i already ran a bios update and all the updates for ms are current.. suggestions???

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.

Iphone not ringing, clock not holding correct time and no wi-fi

Man...I thought I had done something, but since the 2.1 update, my phone doesnt ring but for one or two random calls. The clock is also not holding time...it does if i restart the phone but within hours its back to hopping around, trying to get the right time. When it does stop doing that, the time is wrong.
On top of that, it cannot find any wi-fi connections.
Ive restored it to the previous back up and it doesnt do any of this.
Is anyone else having these problems since the update?

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If those solutions don't work your iPhone 4s has probably developed a hardware problem. The permanent solution is to get it replaced.
You can search the internet for heating and freezing solutions that might work (at least for a while).
For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A
Root cause: On some iPhone 4s devices there may be a flow soldering problem with the WiFi chip. After long periods of WiFi activity such as installing an iOS update (for example, iOS 7 or iOS 8) there may be a connection failure. A work-around to this is the procedure in the youTube video.
A true hardware fix may be found here:
https://www.ifixit.com/Guide/How+to+Fix+iPhone+4S+Wi-Fi+Grayed+Out/22167

Display real time data on a plot in a sub VI and main VI

I am building a program to measure and plot real time data. Program has several steps so I build few Sub VIs to make it simple. My problem is I am plotting real time data in my SUB VI(it works fine), but in my main program when I try to get the same plot its not real time data plot. Plots appear at the end of the program. All tips and help would be greatly appreciated. Thanks
I have attached my main VI and Sub VI
Solved!
Go to Solution.
Attachments:
main VI.jpg ‏116 KB
Sub VI.jpg ‏242 KB

LabVIEW program is based on DATA FLOW, now, until the subVI will finish execution (while loop will be stopped), the execution in Main VI will not proceed any further.
If you can pass the reference of 'XY Graph' inside the subVI, you'll be able to update the plot (placed on MAIN VI) from within subVI.
Find attached example for your reference.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
Example [LV 90].zip ‏26 KB

Time date stamp ?

When making a video has anyone experienced trouble with the time and date on the time line being different fro the original clip ?
i have to be sure the video displays the correct time and date for legal cases. I am considering purchasing the program and swithching from iMovie and final cut pro beacause the will not display the correct time and date without having to minipulate each clip.
Thank you

Premiere Pro does not have time date stamp functionality. FYI, you can download the Premiere Pro CC trial to try out for free. https://creative.adobe.com/products/premiere

Can I config timesten not to hold all data in memory?

In our production environment we use a server with 32GB memory to run Timesten, but developer machine only have 2GB memory. Now we are going to fix some issue that require duplicate the production data to Developer machine, can we have config timesten not to hold all data in memory so that it is possible to duplicate the production data to Developer machine? Is timesten support something like cache table as hsql?
http://hsqldb.sourceforge.net/web/hsqlFAQ.html#BIGRESULTS

TimesTen is an in-memory database. All the data that is managed directly by TimesTen must be 'in memory' and the machine hosting the datastore must have enough physical memory or system performance will be severely degraded.
The only way to have a combined in-memory and on-disk solution is to introduce a backend Oracle database (10g or 11g) and use TimesTen cache connect. Of course, this then becomes a very different configuration and depending on what 'issue' it is that you need to investigate and fix the change to a Cache Connect configuration may hinder that investigation.
Chris

Why data memory is not completely wiped out while closing a VI?

I am facing some memory allocation issue in my LabVIEW project. Help me sorting it out. Followed below steps,
1. Launching LabVIEW 2011.
2. Checking memory allocation (say it is n kB) 3. Opening my project VI.
4. Again checking memory allocation (say it is n + 10 kB) 5. Closing the VI.
6. Again checking memory allocation.
7. Expected it to be n KB. But it is not. There is some residual memory which is not properly wiped out.
8. Repeated these same steps for NI example VI (C:\Program Files\National Instruments\LabVIEW 2011\examples\control\PID\Autotuning PID Online with Gain
Scheduling.vi) found same results.
Explain me why the data memory allocated while opening the VI is not completely wiped out after closing it.
We are doing some memeory optimization in our LabVIEW project. So a clear justification is required for this question.
Thanks,
Rameshkannan

mrk1 wrote:
I am facing some memory allocation issue in my LabVIEW project. Help me sorting it out. Followed below steps,
1. Launching LabVIEW 2011.
2. Checking memory allocation (say it is n kB) 3. Opening my project VI.
4. Again checking memory allocation (say it is n + 10 kB) 5. Closing the VI.
6. Again checking memory allocation.
7. Expected it to be n KB. But it is not. There is some residual memory which is not properly wiped out.
8. Repeated these same steps for NI example VI (C:\Program Files\National Instruments\LabVIEW 2011\examples\control\PID\Autotuning PID Online with Gain
Scheduling.vi) found same results.
Explain me why the data memory allocated while opening the VI is not completely wiped out after closing it.
We are doing some memeory optimization in our LabVIEW project. So a clear justification is required for this question.
Thanks,
Rameshkannan
YOu may be seeing the file alloaction info being cached. LV will try to remeber where it found files so it can find them faster next time.
I suspect you should ignore that part and focus on the parts of your code that is suffering from memory abuse.
You can use the Profile VIs tools to locate who is gobling up the memory.
Then use "show buffer allocations" to figure out where the issue is.
Post image if you want the gang here to "play along".
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Bi Dashboards issue works properly some times and after not display pointers data and give un expected error and throw login window

HI,
I have toff situation where we deployed bi dashboards in our site and it works some time and some times not,
and some times it keep loading and throw a login window.
works when
we restart performance point service and if not work
we re create secure store service and generated new key and create new pps service application
before that we stopped secure store and pps service using c.a in application server
we are using ssas for datasource to connect from dashboard designer
we have seperate server for ssas dbs
seperate application server running: pps service and secure store service
two web front ends: one of running secure store
1 Domain controller + central admin service running
some times after 4 -5 hours bi dashboards works , we dashboards not display data and throw un expected errors,
also when we try to connect using a dashboard designer from a seperate client machine in same domain ,we have same issue , we unable to connect to ssas datasource server, and if connect some times unable to deploy dashboards.
we tried every thin icreased server time out values in ssas server
:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config\msmdsrv.ini. in this location
and in
c:\program files\common files\microsoft shared\web server extensions\14\webclients\ppsmonitoringServer\client.config
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647" />
even we have same issue
is some thing happening when dashboards working some time and after some time not
is a secure store crashing or its still request pending in IIS and not authenticating to data soruce why
below are the logs
Here are the results of the log analysis :
server wfe1
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services 39 Critical A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application
is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services ef8z Critical ‏‏حدث
استثناء
أثناء عرض
عنصر ويب.
قد تساعد
معلومات التشخيص
التالية في
تحديد سبب
هذه المشكلة: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. ‏‏رمز
خطأ "خدمات PerformancePoint"
هو 20700. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C SharePoint Foundation Runtime ba3q Medium Redirect to error.aspx?ErrorText=Request%20timed%20out%2E failed. Exception: System.Web.HttpException: The remote host closed the connection. The error code is 0x800704CD.
at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)     at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()     at System.Web.HttpResponse.Flush(Boolean finalFlush)
at System.Web.HttpResponse.End()     at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryString) 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:47:32.69 w3wp.exe (0x2128) 0x2154 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 78c107cd-0d4b-46f5-8e1a-0d9b4ebc7b29
09/01/2014 15:07:40.74 w3wp.exe (0x2128) 0x209C PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/28_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) abf0263d-7333-4e4f-9cd4-a3a4dcb700c0
09/01/2014 15:13:25.92 w3wp.exe (0x2128) 0x18DC PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/218_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) b35bf864-54f4-43fa-88a8-44cdf938bfa2
09/01/2014 15:11:10.87 w3wp.exe (0x2128) 0x1F88 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Courts/Bic/Lists/PerformancePoint Content/4_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 7cea0eb6-214f-4d7b-a6e7-97a0fe11c956
09/01/2014 15:11:40.87 w3wp.exe (0x2128) 0x2150 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/162_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 4154222b-6ff0-4b64-81b8-d08501a19278
server wfe 2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
In the Roiscan logs we get an error in regards to the English Language pack:
Review Items
============
Error:                       Product {90140000-1015-0409-1000-0000000FF1CE} - Microsoft SharePoint Foundation 2010 1033 Lang Pack: has unexpected
file state(s).
adil

chinnijagadeesh,
You suck!
Signed: The rest of the universe.
... and quit crossposting FFS... it really is quite annoying!

Windows server 2008 R2 Standard edition time server problem: The computer did not resync because no time data was available.

Hello,
I'm trying to get my 2008 R2 server (physical server) to synch with an external time server. I've read other threads on the topic but have not found a solution. I'm sure i'm missing something.
First the step leading to the error:
w32tm /resync /rediscover
Sending resync command to local computer
The computer did not resync because no time data was available.
Following is the history:
Here are the steps
C:\>netdom /query fsmo
Schema master               DC-01.coastal.local
Domain naming master        DC-01.coastal.local
PDC                         DC-01.coastal.local
RID pool manager            DC-01.coastal.local
Infrastructure master       DC-01.coastal.local
The command completed successfully.
next:
w32tm /config /manualpeerlist:time.nist.gov,0x1 /syncfromflags:manual /reliable:yes /update
The command completed successfully.
next:
net stop w32time && net start w32time
The Windows Time service is stopping.
The Windows Time service was stopped successfully.
The Windows Time service is starting.
The Windows Time service was started successfully.
Next:
w32tm /resync /rediscover
Sending resync command to local computer
The computer did not resync because no time data was available.
Next:
Did a restart of the server and repeated:
w32tm /resync /rediscover
Sending resync command to local computer
The computer did not resync because no time data was available.
Next:
Ran the following:
w32tm /query /configuration
C:\>w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Policy)
AnnounceFlags: 10 (Policy)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Policy)
MaxPollInterval: 10 (Policy)
MaxNegPhaseCorrection: 172800 (Policy)
MaxPosPhaseCorrection: 172800 (Policy)
MaxAllowedPhaseOffset: 300 (Policy)
FrequencyCorrectRate: 4 (Policy)
PollAdjustFactor: 5 (Policy)
LargePhaseOffset: 50000000 (Policy)
SpikeWatchPeriod: 900 (Policy)
LocalClockDispersion: 10 (Policy)
HoldPeriod: 5 (Policy)
PhaseCorrectRate: 1 (Policy)
UpdateInterval: 100 (Policy)
[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
CrossSiteSyncFlags: 2 (Policy)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Policy)
ResolvePeerBackoffMaxTimes: 7 (Policy)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 0 (Policy)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Policy)
Type: NT5DS (Policy)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
Any feedback/guidance appreciated!!

Hi,
You may need to update command w32tm /config /syncfromflags:domhier /update, to change the IntranetServer w32time type to nt5ds (this sets the service to pull from the AD).
For more detailed information, please refer to the thread below:
The computer did not resync because no time data was available (w32tm)
http://social.technet.microsoft.com/Forums/windowsserver/en-US/127e7fe7-6fff-469d-8536-8da1c9825cb0/the-computer-did-not-resync-because-no-time-data-was-available-w32tm
You could refer to the article below to configure time in Active Directory:
“It’s Simple!” – Time Configuration in Active Directory
http://blogs.technet.com/b/nepapfe/archive/2013/03/01/it-s-simple-time-configuration-in-active-directory.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IPhoto, sort by date is not a true date/time sort

In iPhoto, sort by date is not a true date/time sort. If you have two cameras with there own naming convention iPhoto sorts filename by date separating the two cameras in the view. Is there a way to sort by DATE&TIME ONLY?

Using two cameras using iPhoto to upload pictures.
Both cameras are set to the correct time and date.
Connect camera ONE filenames IMGP0101
By default:
No event name
Split events checked
Select import 12 photos
Creates events:
Untitled event December 27, 2013
In order by time
Untitled event December 28, 2013
In order by time
Untitled event December 29, 2013
In order by time
Untitled event December 30, 2013
Connect camera TWO filenames IMG_1101
By default:
No event name
Split events checked
Select import 12 photos
Creates events:
Untitled event December 28, 2013
In order by time
Untitled event December 29, 2013
In order by time
Untitled event December 30, 2013
Now I have 2 events for each of December 28, 29 and 30 they are not all under the same event name. My only option is to click and drag the pictures from the second set of events to the first set of events then they are in order. This is a real pain to do. There needs to be a way to reset the event dates so all pictures from both cameras end up in the right event date.

When creating a comment summary, I want to end up with a pdf of comments only. In addition, I do not want author, date, time, or page number to show in my comments summary. How can I do this?

When creating a comment summary, I want to end up with a pdf of comments only. In addition, I do not want author, date, time, or page number to show in my comments summary. How can I do this? I do a lot of reading, and when I summarize my comments, I like to save these comments in a larger document I compile over time. I typically create a comment summary, export it to a text editor and find myself having to delete author, date, time, page number, and anything else that is not the raw and net comment. It would save me some good time if someone showed me how to do this. The reason I do not want any additional information is because it simply adds stuff I do not need in my compilation of summaries for large amounts of papers over time.

What you're describing can't be achieved using the built-in comments summary function of Acrobat, but it can certainly be done if a custom-made script it used to generate the summary because then you're in full control of what's included in it and what's not.

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When putting in "time/date" of future events, does not accept?

When putting in "time/date" of future events, does not accept?

I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No

N73ME not holding time & Date memory

Similar Messages

Maybe you are looking for