N73me "system error" when switching to camera

Hi, I bought my N73 music edition about 3 months ago. I just recently made update for PC Suite Software and checked for updates for N73me. I found 4.0736.3.2.1 release and made the update. Now both of the cameras won't start and display only system error and exclamation mark. I've already reset the settings of N73me and made re-install of the update via pc. What's wrong with the camera system ? Otherwise N73me seems to work ok. Does Nokia take care of this type of errors ?

I also have this same problem. About a week ago I installed the v4.0736.3.2.1 firmware and today when I went to use both cameras all I get is a beep and System Error! I have taken the battery and SIM card out and have used the code *#7370#. It wiped my phone memory clean but did not fix the camera problem. After checking around the Internet I see quite a few people having the same problem. How can this be corrected and furthermore, if this is such a common problem why is it not stated how to rectify this at the download site? Thanks for any help or suggestions.

Similar Messages

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

Employee Photo Upload Fail - "System error when archiving"

Hi all,
When i am trying upload a photo of an employee in our ESS development portal its working fine. But the issue here is when i am trying to upload the same in testing ESS portal its displaying an error message as "System error when archiving a photo" and i tried to upload the photo in back end also at that time its displaying an error as "HTTP error :401 unauthorized".
Kindly help me to resolve this problem ASAP.
URGENT!!!!!!!
Thanks in advance..!!!

Hi Van,
Thank you for your reply. Finally we found the solution for this. The Issue was that the user CONT_SERVER in SICF(tcode) -> Content Server was locked. We unlocked it , now the photos are uploading successfully...

KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

System error when archiving a photo

Hi,
I can store employee picture successfully in R3 (T-Code: OAOH). I can
see it there too by Extract->Dispaly all facsimiles in PA30 for that
employee.
But I can't see the picture from ESS ,only a frame is coming. The URL
of the picture is <R3 hostname>:8000. But the ITS service i.e content
server is <R3 hostname>:8001. If i give 8001 then the picture is
comming. I can't store any picture from ESS ..."System error when
archiving a photo".
I can delete the picture in TOAHR table from the ESS by removing the
employee pic though i can't see it.
We have 2 cluster instances...1) sapprddb 0 (message server is under this)
2) sapprdapp 1 (application server r3)
Please help...
Thanks and Regards,
Sekhar

Hi,
Thanks for ur reply. But I have already gone through the steps. I can see the picture from R3 and store it there. But the problem is in ESS (portal). I can't store it from ESS as the address it going to store is <R3 hostname>:8000/fp/bc/contentserver........The actual should be <R3 hostname>:8001/fp/bc/contentserver........
Plz suggest me where from it take the value 8001 in portal for employee pic. For all other T-iview working fine. Telnet to 8000 is not possible, but 8001 is ok.
Thanks,
Sekhar

'System Error' when trying to save Form Manager Registry Settings

Hi,
trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
> System Error
>
The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
Has anyone had this error as well?
The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
SpyJMSException.
Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
Regards,
Steve

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

I have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

i have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

The first error comes when i open my laptop:
APSDeamon.exe - System Error
The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
when I try to open Itunes, it says:
iTunes.exe
iTunes was no installed correclty, please re-install itunes
Thanks!
Annabel

System error when trying to open Ngage?

It was working up until today. Now I just get "system error" when I try opening it. I have tried installing n gage again and even deleting n gage but still the same problem.
Any ideas?

04-Nov-2008 11:01 PM
liam182 wrote:
lucky just found answer in time was about to re install phone memory. All because of one little router character
see here
http://zomgitscj.blogspot.com/2008/11/n-gage-system-error.html
Good to know my blog was of help to you
Mobile News, Reviews and More : http://UnleashThePhones.com/

System error when archiving a photo/file

Hi Experts,
here we are using EP 7, and MAXDB 7 as backend and SAP content server AIX 5.3, apache 1.3, when we are checking in SAP content server srkp09, we tested all 3 possibilities like single test, multiple test, and runtime test all the tests are successful, as part of portal side for a employees chnage own data we are trying to attach a photo ->Review and save -> we getting message attachment save to Database. !System error when archiving a photo. please advice how to rectify this problem ? is this is part of content server issue or portal issue.
waiting for your quick help on this
Thanks & Regards
VenkataSurya

Hi,
Thanks for ur reply. But I have already gone through the steps. I can see the picture from R3 and store it there. But the problem is in ESS (portal). I can't store it from ESS as the address it going to store is <R3 hostname>:8000/fp/bc/contentserver........The actual should be <R3 hostname>:8001/fp/bc/contentserver........
Plz suggest me where from it take the value 8001 in portal for employee pic. For all other T-iview working fine. Telnet to 8000 is not possible, but 8001 is ok.
Thanks,
Sekhar

System error when sync e-mail

Hello,
in the menue "Settings - Connectivity - Data transfer - Sync - Options - Synchronise" I get the message "system error" when I want to sync e-mail. The email settings in the sync profile are:
database in phone: ovi
sync e-mail database: ./e-mail/unfiled
Can anybody help.
Txs
Inge

im having the same problem with my new e72..plz help

N85--system error when i open n-gage!

wat shud i do now? just a day back i got n85 and it says system error when i open the n-gage application.. so i deleted it!!
now what??
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

the problem still persists... can anyone has the relevant experience to help in this matter.. i emailed nokia, their solution did not work too...
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Red screen when switching the camera.

Hi When I switch my camera from normal shooting to face me, it appears with a red screen. when i look at the lens on the front of the phone it appears to to red inside, but the back lens is normal.
Please any info will be appreciated.
Marc.

stants66 wrote:
Hi,
Yes the screen turns red when switching the camera. No it does not stabilize & I canot see myself when switching the cam.
Yes restart your phone as suggested above. Then use BlackBerry Virtual Epert to run a camera test.
Update us with the result
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

System error when trying to update software

Hi please help me ... why is a system error only comin up when i tryin to install updates for iphoto etc

You do not have enough hard drive space to install all those applications. Reason why you are unable to install.
You need to first do some serious housekeeping. So forget what I said previously for the time being. First things first: Make room!
================
Empty the trash!
Open up your application folder & go through all your apps. Trash all the apps you no longer want and/or use.
An easier way to do this is to open the Application folder in list view & press the [b]Command+j[/b] keys.
In the the dialog that appears, click the "This Window Only" button & the "Calculate All Sizes" check box. Wait a bit until your file & folder sizes have all been calculated, then click the "Size" column to sort your apps from the fattest to the most anorexic.
Get rid of all your photo files you don't want and/or need. Same goes for those pics off the websites you downloaded (gifs, jpegs, etc.).
Get rid of all your music files you no longer listen too. Especially, if you already have the actual CDs and/or DVDs or you can later redownload from a website.
Use Spotlight to make sure you got rid of everything. You can even trash directly from Spotlight!
Drag what you don't want and/or need to the trash. Better yet, download this neat little shareware app *demo* called AppZapper. It basically does all the work for you by not only trashing the apps but the apps preference files, caches & all its associated files.
Another software that does the above is AppDelete. Best of all this software is *free*!
Burn what you want and/or need onto CDs or DVDs.
Not everyone has the luxury of purchasing an external HD to store their "stuff, junk, music & photos".
You can check with your ISP to see if they offer *free* storage space. Most if not all do now-a-days. I store all 5000+ of my music & 500+ music videos in my ISP storage bin. There are thousands if not millions of *free* storage facilities on the web also. Use your favorite search engine, to search them out as they come in different storage sizes to fit your needs & wants.
Check for duplicate fonts.
Applications>Font Book
Select “All Fonts”
If you see any “black dots” next to any fonts this mean you have duplicates and/or multiple versions of these fonts.
To clean this up, select a “black dotted” font or the Apple + *click* to select multiple dotted fonts;
Edit>Resolve>Duplicates.
What the above does is turns off the duplicates & multiple version fonts. Not delete them.
More than likely the “extras” were installed by other programs and/or other users.
Clear out font caches
Use FontNuke. It does all the work for you. And, best of all it’s *FREE*.
Printer Drivers
Get rid of all the printer drivers you don’t need & use except the ones for your *current* printer(s)/scanner(s).
HD>Library>Printers Folder
If you accidentally threw something out that you needed for your printer/scanner it can be easily obtained from the manufacturer’s website and/or from the CD that came w/the printer/scanner.
Garage Band
Has about 1GB of loops stored. Get rid of some some them. You surely don’t use, like and/or need them all.
HD>Library>Audio/Apple Loops>Apple>Apple Loops For GarageBand
Or just get rid of the Garage Band app altogether if you don’t use it.
Get rid of extra languages
Strip your computer down to your “native” tongue. You can do this with a *FREE* utility called http://monolingual.sourceforge.netMonolingual. Another app that apparently does all the work for you. I’ve never used it. However, a lot of users here swear by & recommend it highly. However, there is a warning for *native English speakers*. Make sure you keep BOTH English and English (United States).
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.
====================
After you make room on your HD, try updating from SU again.
For repairing permissions, detailed instructions are in the OS Help menu.
Short version: Go to Applications>Utilities>Disk Utility and select your volume and then select Repair Permissions.

Error when switching accounts in XP

I get an error when I switch to another account on my win xp prof.
the error message is "
Core Center
Failed to load hardware monitor driver
When I click OK I get the next error message "
No Hardware Monitor !
After clicking OK again the systems craches en reboots
Anyons know how to fix this ??
TiA

I personally don't reccomend the use of "corecenter" and I don't have a solution, but what it sounds like to me is a poorly scripted peice of software. See, when you "switch" accounts, but don't log off, some of the registry remains, and possibily the software doesn't see that you have switched users, so it's looking around for something that isn't there.
So in other words, I don't like corecenter, most of us around here use speedfan.
So if anyone knows of a solution....

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

N73me "system error" when switching to camera

Similar Messages

Maybe you are looking for