N76 Date does not advance if phone is switched off

If I switch off my N76 on a Friday and leave it off till Sunday the date remains as Friday. The time is still correct. I then have to reset the date manually.
I have a repeating alarm set for Weekdays (Monday to Friday).
I am running the latest available software - i.e.
v30.0.015
26-08-07
RM-135
Nokia N76 (70.01)
Any suggestions?

That's a very strange one!
I'd assumed the time and date both ran off the same secondary battery backed system.
I guess it could potentially be a software issue meaning it might be fixed via a factory reset or a firmware upgrade (remember to back up first!). If neither of those work, I'd take it to a service centre - preferably on the Monday so you can show them the problem.

Similar Messages

My network goes off and does not come back unless I switch off and switch on

I have a vodafone connection.
Whenever I go underground while traveling in train, my network goes off and but does not come back unless I switch off and switch on the phone... any suggestions???

I would advice to perform a hard reset (holding Power button + Home button for at least 10 seconds until Apple Logo appears)

HT4623 os6 iphone 4s wifi password does not save when phone is turned off and turned back on

i just udpated my iphone 4S to OS6 and when accessing my secured wifi I add my password and then joins secured network. However, if I turn the phone off and turn back on again the wifi connection is lost and cannot re join until I add my password AGAIN. Tried soft reset and reset network but nothing worked.
Any other suggestions?

If you do a search of the forums, there appear to be a number of postings regarding iOS6, wi-fi security and random disconnection of wi-fi. It appears, as the posts have discussed, it is connected to the use of WPA2 security. Most of the posting, however, have been related to iPhone 5, not the 4S. As far was what was posted, they say Apple has been made aware of the issue and they are looking for a fix. Not sure if that would help the iPhone 4S, because it does not support both bands as the iPhone 5 does. Just remember that WEP is less secure than WPA2. You might also try restarting your router after changing back to WPA2 on the phone, depending on what the router is set for.

IPhone alarm not working when phone is switched off

Is this right? My Nokia alarm always used to go off at the desired time even if the handset was completely switched off, but my iPhone doesn't appear to be able to do this?

Malcolm Rayfield wrote:
the iPhone won't be completely off then since it keeps the time adjusted and working, so it is running in the background!!!
it is a matter of a software update!!
if the iPhone as u guys claim is OFF OFF then u need to set up the time each time u turn it on!!
that's what I know
The iPhone is also not completely off, but it doesn't do anything noticeable when off (such as disturb others in a movie theater by sounding its alarm).
But then of course nobody would surely be so stupid as to set an alarm to go off when they're going to be in such a place.

T440s Systen Date Does Not Advance at Midnight

This is a brand new T440s, i7, W7 Pro that I have had for 3 days. On the first power-up, the system date was set on "tomorrow," in other words, one day ahead. I reset the date, time, country and time zone. It is set to sync with the internet. Each morning now when I power it up, the sysem date is "yesterday," one day behind. I have to manually change the date each morning. How can I fix this permanently. Other than this date glitch, it's a beautiful machine. Thanks.
Solved!
Go to Solution.

Hello.
You must change the date in your BIOS (F1 during the Lenovo startup screen) -> Date/Time. Set it to correct date and time, then proceed to Restart and select Exit saving changes.
See if this doesn't fix it for you.
Cheers!
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help

So i tried downloading ios8 and my phone is stuck in recovery mode. i have tried to restore it in itunes and it continues to say itunes does not recognize my phone. i have all my systems up to date and i have tried restarting my computer. help

Me too and I have 4 devices which are now not recognized by iTunes but were immediately before ios8 upgrade
Come on Apple get your finger out and help us here please ?

The time on the weather widget on my home screen does not match the phone time. Initially it did, but one day it started being 1 hour earlier than the phone time. I went into Settings/Date

The time on the weather widget on my home screen does not match the phone time. Initially it did, but one day it started being 1 hour earlier than the phone time. I went into Settings/Date & Time & now the time on the weather widget is correct, but the phone time is 1 hour earlier. Any suggestions??

Settings | Date and Time then select Automatic date & time, and Automatic time zone. In this way, the carrier time will populate the phone. If it's still going 1hour off, then I'd call VZW and inquire if they have a tower issue, specially if it happens in one particular place.

Background Job cancelling with error Data does not match the job definition

Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time     Message text                                                                       Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
Please help me in resolving this issue.
Thanks in advance,
Sai.

hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode.

Regarding "Data does not match the job definition; job terminated"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

Hi dharmendra
Good Day
How are you
I am facing the same problem which you have posted
By any chance have you got the soultion for this
If so please let me know the solution for this.
Thanks in advance.
Cheers
Vallabhaneni

Embedded Database - data does not load

Hello.
I am currently using NetBeans 6.5 and am experimenting with the CarsApp tutorial.
Whenever I create an application using the server database, the data loads automatically when the application starts.
However, when I create the application using an embedded database, the data does not load and I just get a blank table.
For more information, go to: http://forums.sun.com/thread.jspa?threadID=5366394&tstart=0
Thank you in advance!

I'm sorry, I didn't know it was so looked down upon.
I thought that since this topic pertained to both Destop Applications and JDBC, I could get the best and quickest answer if I posted in both.
Apparently, that was a mistake.
Thanks, anyways!

Header business data does not apply to item

I have a document that i want to delete but the system won't allow me to do any changes due to error message we are receiving when entering this order "Header business data does not apply to item". Please help me reject the this order. By the way, the document is Debit Memo Request.
Hope to hear from you guys. Thanks in advance.

Hi Riyaj,
To answer your questions:
1. There were no preceding docs existed.
2. I already put reason for rejection, however, there is a warning message that it cannot be deleted.
3. I am creating a Debit Memo Request. I want to do some changes to this particular document but Information Message "Header business data does not apply to item" keeps on appearing.

Number range object for characterstic DATE does not exist

When I am trying to load data from ODS to cube getting below error message.
"Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
In update rules we are trying to convert this date Infoobject(Char) into Key figure.
If anyone had exp with similar issue please reply.
Thanks in advance
Vani

Hi Vani,
Is ZEXTDATE Characteristic have any data in it? Can you check once.
Veerendra.

Update does not recognise the phone?

The phone was update then an itunes logo appeared and will not turn on. It has been connected to itunes but the update can not be completed as it does not recognise the phone. Itunes and laptop are up to date.

Did you try to connect in recovery mode? iOS: Unable to update or restore
Is Apple Mobile Device Service still installed and active on your computer? iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
More tips in this article: iOS: Device not recognized in iTunes for Windows

After installing iOS6 on my iPhone 4, iTunes does not recognize my phone as a device.

After installing iOS6 on my iPhone 4, iTunes does not recognize my phone as a device. It no longer appears in the left devices column. I keep getting an error pop-up from Windows telling me "MobileDeviceService stopped working and was closed."
Yes, I have the latest version of iTunes for Windows. And when I go into Preferences, it still lists my iPhone as a device back-up, and the date of the last back-up.
What can I do to fix this?

If your iTunes is the latest version, restart your computer and reboot your iPhone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPhone restart. See if that fixes your problem.

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

N76 Date does not advance if phone is switched off

Similar Messages

Maybe you are looking for