N78 Firmware update to 30.011 fails ("nmwcdnsu.sys...

hi together,
i have still a big problem with updating to the latest firmware from version 21.002 to version 30.011.
while update process is starting a windows pops up and a cd is requested (-> Nokia USB Flashing installation Disk) containing "nmwcdnsu.sys" file, which i do not have!!!
-> please find attachment.
and then everytime update fails, i think due to this missing sys-file.
all this is done with the nokia software update tool and usb data cable connected.
this is the first time for me having such problems with firmware-updates.
and by the way, a firmware-update is not shown or provided when i use the phone asking directly for the latest firmware from the device-manager-info-overview (is not supposed to be available, tells the display me after connected to the nokia server...).
thanks a lot for hints and tips.
regards from germany
sascha
Solved!
Go to Solution.
Attachments:
0728.jpg ‏30 KB

hi guys,
i got the meaning of nsu a few seconds later when i had already posted the reply...
the issue is now solved. but the nsu needs some fixes!
i will inform the nokia carecenter in germany.
i reinstalled the very nice and faulty tool "nsu" (with win xp-restart/reboot) and gave him several times manually the destination-folder from these/some requested specific *.sys-files, which the tool obviously does not know the installation-folder (Connectivity Cable Driver folder). and then it was successful.
thank you very much guys.
greets
sascha

Similar Messages

HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

Activation and Firmware update on ATV 3G failing

Hi all,
I just purchased an ATV 3G and it is running 5.1. I actually just swapped the unit out where I had a 2G. (Moving the 2G to a vacation home)
So, I keep trying to update the FW and it kees failing. I've tried about 5 times. In each case:
The firmware downloads, It then goes to Step 1 preparing update. The progress bar completes on that Step and then I get a message that the Firmware update was not successful and it tells me how I can restart the unit.
When I go into Settings-General-About it shows the Activation as Failed (Skipped). I am hoping that this is related to the Firmware problem.
After these problems, I put my ATV 2G back and I was able to get it to update its firmware. (From 5.1.1)
After the 2G updated, I then put the 3G back and it failed again. (I used the same power, HDMI and ethernet cable for both, so it isn't a cabling problem)
I have no idea on how to troubleshoot these issues.
Any help/advice would be greatly appreciated.
Thanks,

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

Firmware Update 4.2.8 Fails on PowerMac G4

Hello,
Concerning a Powermac G4 running 9.2.2 & attempting to upgrade to 10.3 (which requires the firmware update):
Removed all attachments except mouse, monitor and keyboard.
Ran firmware update 4.2.8 (for 2 x 450 mHz PPC AGP Graphics Powermac G4).
Restarted with "programmer's button" held in.
Tone sounded; Mac starts to boot into the update.
The folder flashes a question mark for a second, then looks like it has engaged (the screen goes blank for a second as if it were beginning to boot as usual).
The flashing question mark then appears again and remains on-screen indefinitely, requiring a manual restart with "option" key to boot into 9.2.2, at which point a message appears saying that the firmware update has not been installed.
In other words, whatever the firmware's trying to do, it isn't doing because (so it appears) it can't find the system folder.
I MUST install OS 10.3 IMMEDIATELY.
PLEASE HELP ASAP

Hi, amacproblem -
...what else would it have been set to?
It could have been set to a CD; or Network Disk (some OS 9.2..x installs leave it set to that for some reason); or nothing.
Although that firmware update has not been reported as checking for incompatible RAM before updating the firmware, it is possible that could be an issue. To check for that, download and run DIMM First Aid - it's a small program and takes just a few seconds to perform some basic checks on RAM; it can also repair some sub-spec RAM modules so that they are in compliance.

Xperia Z2 Firmware Update via PC Companion = FAIL!

I appologize if this is a duplicate post. I searched the forum before posting but it seemed similar posts weren't exactly the same issue(s) I'm experiencing.
I'm getting the notification that there is a firmware update for my Xperia Z2 tablet but that I am required to use PC Companion to download/install it. However, for some reason PC Companion refuses to detect that my tablet is connected. I've tried multiple usb ports and two different computers. Under device manager it doesn't show any device driver issues and the usb drivers are installed and up-to-date. However I constantly run into error message after error message. The tablet is set to MTP mode and connected via the included Sony usb cable. I've followed every wizard, prompt, guide, etc. but in the end PC Companion still says there's no phone/tablet connected. Would be so much easier if it would just download the update to the tablet like EVERY other android device I own does.

Did you take a look at this?
http://talk.sonymobile.com/t5/FAQ/USB-connection-problems/m-p/348074#U348074
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Nokia N78 firmware update

Whenever i choose to update my phone (N78) software, after donwload completes from internet, at around 13~15% of updgradtion process communication (USB link) with mobile phone drops and systems propts a new hardware is found (Nokia ROM Driver) but after sometime all communication is stopped and updating software keep asking for retry but nothing happens. This is also to be noted that during the whole operation i usually close all firewalls.
Can some one guide me the correct or alternative way to upgrade my cell's software?

Nokia seems to be comitted to improve the user experience... Its really good to know that... They have to do it to survive... BTW Nokia N78 latest firm ware is a little better. The operations seems to be fast.
It has just been a day with the firmware.. So far no problem... I faced a few problems while updating the USB get disconnected when the update is about to begin... but the latest software update program has all required warning... It asked me to restart my pc and my cell phone... And try again ... I did it Alas it worked ... got it updated ...
I found a few things new :
The icons for videos (The one in old version was better) and search are all new.
I am from india. I brought this phone seeing the FM transmitter option. But after i brought the phone i found it missing.
But with this software update i got the option under the music menu :-) thanks a lot nokia.
Few problems with the camera still remains... music volume has come down a bit... the gps seems to be working a little faster.

Serious bug after n78 firmware update

I update the firmware from 12.046 to 12.149 recently but after that am not able to install sis applications and few java applicationa are also not installing or malfunctioning. Have done a deep reset (*#7370#) but the problem remains.

How did you try to reinstall the FW? (Using NSU or Nokia FW Over the Air update also known as FOTA)
as i know there is no option for reinstalling FW for the phone using FOTA. if you wants to reinstall the FW you should try other method of FW installing, that's mean you have to go for NSU (Nokia Software Updater).
Here are the instructions for Update FW using NSU
http://europe.nokia.com/get-support-and-software/download-software/fota-update-phone/by-pc
for the details
http://europe.nokia.com/get-support-and-software/download-software/fota-update-phone/help
Don't forget to backup your data
Hope this work for you!

X6 firmware update to V40 installation - fail loop...

Hi
My Nokia X6 16GB will not update to V40 through Ovi, Nokia Suite or PC Suite.
The phone knows the V40 update is availablefor but wont let me update OTA as it wants me to use the PC to update which is where the problem begins;
Ovi suite knows it needs V40 as well and gets as far as doing the backup, it detects a USB connection then gets in an endless loop where it loses then gains the USB connection (you have to press next everytime).
PC Suite doesn't work at all
Nokia Suite - occasionally connects and it can see the update but loses the connection almost immediatley between it and the phone and I have to start again (the phoen itself remains connected to the PC. Nokia Suite also does some strange things to the screen, which ciorrupts 50% of the time but is cured if repaired only to fail again. No joy on that count
I have tried every possible combination of reloading, wiping, deleting the various nokia elements etc etc. Ovi gets me closest and is the most stable of all the suite's but still wont finsih the job
I'm at my wits end. Geniuses please step forward
Cheers Grayzza
PC is Core 2 Quad, W7 Home Prem 64 SP1, 4GB RAM. All drivers up to date, no viruses.

Hi Farby
Thanks for this, however despite disabling virus/firewall etc no success.
Nokia SUite is up to date
Software Updater loads but gets stuck on install stage so no success with that either.
So I still can't get past the looping USB lost/USB connected phase when installing V40. However, I was able to update MAPs throught Nokia Suite with no problem. Weird
Any other solutions you can think of?
Cheers
Grayzza

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

Zen Micro needs firmware update for Vista, but what now as it fail

As I now use Vista (paid for by my work) I came to install my Zen Micro which wasn't recognised so I came to the website and discovered that you need version 2 of the firmware for it to be compatible with Vista. Having never had the need to upgrade before I was still on Version one so I downloaded it onto my other WinXP machine?which I've used my Zen on alot before to do the upgrade. Started the upgrade and all seemed to be well until a point a 3rd of the way through a box came up asking what I'd like to do with the device (like the one when a USB key inserted). Leaving the upgrade I returned hour later to see nothing has changed and the upgrade has failed.
I've tried all the options with recovery mode but it still just shows up as having version 0.0.65 and when inserted into a PC shows up as a?Creative Zen Micro?in device manage and has a 20MB disk partition for storage but when I try and run a firmware patch it says its not connected.
Looking round this forum this seems to be quite common upto now but with the release of Vista people are forced to take the 'risk' of running a firmware update that when it fails doesn't seem to be recoverable even in recovery mode. Please can you look into updating the firmware to find these devices that it can't see, for many years I've laughed at my friends with their crashing ipods that need charging everyday due to not being able to change the battery but it now seems the jokes on me.

I used Adambonello's fix and it worked?http://forums.creative.com/creativel...mp=true#M80097

MacBook Pro boot failure after firmware update

Hello,
I've had my MacBook Pro with a solid state harddrive about a month. Tonight I did an update (including a firmware update) and it has failed to boot. The fans run at full speed, but nothing boots. The screen remains blank. What can I do?

iTunes sound works - but no internet sound!!

Aluminum Keyboard Firmware Update 1.0 does not install

I just got notification from Software Update that a firmware update for my Apple Aluminum Keyboard was available. I attempted to install it and after three attempts, I got "Unexpected Error (3:4)". That's it. Nothing else. I didn't find any further information associated with the download and no other documentation. I did go as far as removing the keyboard from a KVM switch and USB Hub and connected it directly to my G4 Mac Mini. Still no success. Does anyone have any clue about software/firmware updates for peripherals that fail in this way? I've had the keyboard for about 3 months.

I also had the error "An unexpected error occurred (4:3)" when installing the Keyboard Firmware Update. I resolved the matter by unplugging my KVM switch (and all other USB devices) and by connecting the keyboard directly to the computer.

N78 (O2 brand) Firmware Update

I need to update the firmware on my N78 which at present claims to have version 11.043. NSU informs me that this is the latest version and therefore does not offer me the option to update. O2 tell me that the latest version authorised by them is 20.149. I have just spoken to a gentleman at Nokia Care Centre who tells me that although my phone states it has 11.043, this is just a glitch and it does in fact have 20.149. THIS SOUNDS LIKE BS. Can anyone confirm this information. If it is indeed false, how can I update?

Please read this informative article written by one of our senior users Grschinon, which will explain the non-availability of firmware updates for your N78. I have an unbranded N78 and am running v30.011 myself: http://linux.sgms-centre.com/nokiafaq/branded-phones/
Also read the articles on this blog for further clarification on firmware updates: http://techyoddsandends.blogspot.com
For your information also, 30.014 is basically the same as 30.011, except it is only available for a few select product codes (namely Persia, some of Africa).
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Secure link to iTunes store failed and Connection attempt to firmware update server was unsuccessful

Hello everyone, Im facing error with my iTunes. When I run diagnostics i can see "Secure link to iTunes store failed" - please see the image below
Please note: as it is showing secure link to itunes is failed but still i can see iTunes store, but the above error shows when I run diagnostics.
After that when I go through the next and I found the diagnostics report as below, within report i have marked a line with RED colored "Connection attempt to firmware update server unsuccessful". I need HELP!!!!!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Gigabyte Technology Co., Ltd. G31M-ES2C
iTunes 11.3.0.54
QuickTime not available
FairPlay 2.6.12
Apple Application Support 3.0.5
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B9F0069DE9C0
Current user is an administrator.
The current local date and time is 2014-08-05 01:48:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 8400 GS
**** External Plug-ins Information ****
No external plug-ins installed.
The drive G: ZTE USB SCSI CD-ROM Rev 2.31 is a USB 2 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {14DCBC2B-34CB-431B-8625-1E62D7310533}
Description:    WAN (PPP/SLIP) Interface
IP Address:    10.128.133.101
Subnet Mask:    255.255.255.255
Default Gateway:    10.128.133.101
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 06:00:00 1970
Lease Expires:    Thu Jan 01 06:00:00 1970
DNS Servers:    8.8.8.8
        156.154.70.1
Active Connection:    Teletalk
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-08-04 03:23:27.
**** Device Connectivity Tests ****
iPodService 11.3.0.54 is currently running.
iTunesHelper 11.3.0.54 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hi msahed,
Welcome to Apple Support Communities.
It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
iTunes: About the "A secure network connection could not be established" alert
http://support.apple.com/kb/ts1470
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
I hope this helps.
-Jason

Macbook air is stuck in a reboot loop after running Software Update. It looks like a firmware update is failing.

I have a first generation Macbook Air running Lion, and just ran software update to get the latest version of iTunes. It appears I may have gotten a firmware update mixed in the bunch, and now it keeps trying to run the update at boot, failing, and shutting down.
I can start the restore partition, and the system appears to function, but I cannot figure out how to abort this failing update so I can use my system, and determine which update is breaking it and why. I've tried resetting the firmware, but that didn't change anything.
There's nothing, not even a the CD drive plugged into the Air, so it's not a peripheral problem.
I could restore from backups, but that seems like a very brute force way to get rid of a firmware update loader.
Does anyone know how to disable these little beasts?

Restart the Air while holding down the shift key, this is safe mode. Once in to the login screen, login then hold the shift key again. It will disable login items, which can be the cause of startup problems. Remove all your login items from your user accout and try a restart (Note the login items if you need to re-add essential ones later). If it all works well, then keep an eye on third party startup items, they will cause you grief!

N78 Firmware update to 30.011 fails ("nmwcdnsu.sys...

Similar Messages

Maybe you are looking for