N78 fm radio transmitter firmware bug (firmware 20...

Hi everyone, I just updated my N78 with the latest firmware (20.149). A few features of the FM transmitter stopped working (they worked with the older firmware).
 In particular:
1. Now I cannot use the FM transmitter to listen to the streaming audio (e.g. from internet radio stations) to my FM radio. Instead of transmitting the signal to the FM radio, it just lowers the volume on my phone and no signal to the radio: just the intermittent beep that is transmitted when no audio is on the phone. (It used to work!)
2. The FM transmitter only sends the signal coming from the Music Player, not from third party applications (or from the gps application)
3. It seems the FM transmission power has decreased dramatically. With the older firmware I could listen to the radio keeping the phone a couple of meters from the receiver. Now I need to put it a few CENTIMETERS from the antenna, otherwise I hear mainly static!!
These bugs have made the FM transmitter useless on my phone.
 I hope they'll be fixed soon.
Thank you,
Lor 

Hi there, thankyou for your report on the bugs, here is my response (I too have updated to the latest v20.149 firmware):
1.  this streaming internet radio feature has been removed since firmware 12.046 and has not appeared since. i believe, along with many other users here, that this is due to copyright issues, so by deactivating streaming of internet radio they are complying with appropriate copyright controls. it would be nice to stream internet radio through the FM transmitter but this probably will not come back
2.  I found the same thing, i really do wish that it would stream all sounds from the phone, especially from the Maps application because the speaker is tinny. so maybe they can do something about this in subsequent firmware updates.
3.  I find that the FM transmission power is variable, and not has increased/decreased with firmware updates. this is due to many factors, for example, it is summer here in Australia, and i have found that on really hot & hot and humid days that the FM transmitter struggles to send an adequate signal. hgowever, on cooler days the signal is strong and works well. I have tried this on both my car and standalone stereo in my home.
I hope these help you shed  a bit more light on the issues, but I am as always holding out for the v30 firmware very soon

Similar Messages

  • Firmware bug: $CCERT must not be used in Report_Rule

    Prolog
    "Report Rule" can be configured with URL's used to save phone's current configuration. Starting with 7.5.2b firmware it is possible to configure more than one URL here. The semi-colon has been used as separator. It caused issues because semi-colon can be used in casual URL, so the separator has been changed to space in 7.5.5 (see Bug in Report_Rule parsing (SPA50x, fw 7.5.x) for more)
    As of 7.5.7 firmware, the 2048 certificates has been introduced and value of $CCERT variable may contain text "Installed (2048 bits)". It cause other issue related to Report Rule parsing.
    Issue & how to repeat
    $CCERT can be used on "Report Rule" no longer because of wrong parsing order.
    The author of firmware first call variable expansion for complete "Report Rule" string, then split the result by space in attempt to found second URL.
    With Report Rule configured to https://test.local/Report.php?Product=$PN&CERT=$CCERT it is parsed to:
    first_rule is https://test.local/Cisco/Report.php?Product=SPA508G&CERT=Installed, second_rule is (2048 bits)
    It is wrong result. In advance, it reveal the characters inserted into URL by variable expansion are not escaped properly.
    How to fix
    The order of parsing steps needs to be reversed. Report Rule need to be split  into parts first, then variable expansion should be called for both parts independently. Also, strings expanded from variables should be url-encoded properly.
    Disclaimer
    I will not call SMB support to report this bug to them. Assuming the Cisco is interested to repair firmware bugs a staff member monitoring this forum will create ticked by self. I wish that all relevant information including the depth-in analysis has been disclosed here. I'm ready to provide further details or create test environment if necessary. I'm just not willing to call the Support center as I'm not willing to explain all those complex things described here by phone (and they doesn't accept written reports).
    For those non-Cisco-staff users affected by issue - feel free to report the issue to Support center, if you are willing to do it. You are allowed to use information disclosed here, or just refer to this report. I don't care the authorship.

    Post Author: CompositeID
    CA Forum: .NET
    You are not alone on this one, I am having the very same issue as you are and . Everything functioned just fine the last time the application was deployed was deployed and there was nothing changed to any of the reports or code which handles the reports; however, this time I am having the same issue.  I added the parameters to the report to check to see if they were actually being recognized by the report and they do show up, but it refuses to filter the records and brings back every record.  The report works properly if I run it just directly in Crystal though.  I sure hope someone can enlighten us Paul.
    Update: Well, I finally figured out what was causing my issue.  The issue had to deal with the actual older version of the CrystalReportViewer control and the newer version supplied by the update.  I had suspected it was something minor that I had overlooked when doing the update.  Hope this gets you going as well.  Cheers

  • Is there ANY way to report firmware bugs to nokia ...

    Nokia released firmware 51.018 for E52 6 months ago.This broke N-Gage and games which were paid for can not be activted.The problem is not corrected in later updates.
    Firmware v52,v53,v54.Nokia Care centers tell me its Network problem.I have tested 5 E52s and it is a firmware problem.Mailing to ASK nokia does not reult in bug getting known to programmers either.They lecture me about correct settings.
    Some body please tell me if  there ANY way to report firmware bugs to nokia programmers
    Solved!
    Go to Solution.

    do you think there will be a new firmware update for e52?
    E52 - Product code 0585050
    UK.
    V54.003

  • E55 Thread for Firmware Bugs

    I noticed that there isn't yet a thread in order to report E55 firmware bugs, so I started this
    Here the firmware bugs I've found:
    - Hidden WLAN: when you search for wireless access points (for example from the main screen) the phone see always one "hidden wlan", that is not there!
    - Default phone numbers: when you have more phone numbers for a contact, you can choose one of these as default for messaging or dialing, but even if you do that, E55 keep asking you what number to use every time you make a sms
    - Organizer major bug: sometimes (80% of times!) when you edit a memo in Organizer, or when you move it (by changing the start date), you will see that also the end date has changed (adding 1 or more days), even if you didn't touch it! And even if the start and the end date originally matched! So if you had a memo covering one day, now it covers more days, and the end date can't be changed again (you set the correct date, save, and none happens). This make the memos totally unusable!
    - Organizer minor bug: when you open Organizer, and then open a memo, you have to select the information that you want to modify (text, date, synch) and click one more time to edit the memo. But: if you select the "date" or the "synch" row, instead of the "text" row, and then click "modify", the memo is open alway with the cursor on the "text" row. So, the capability of selecting others rows, is pretty useless.
    I hope some Nokia guy will notice this thread so there informations can be useful for a future firmware release, also because I'm getting crazy with the memos issue!!
    Roberto
    Moderator note: word 'official' removed from title, as this may mislead users to believe that the information presented comes from or is in some way endorsed by Nokia.
    Message Edited by michaels on 05-Oct-2009 10:06 AM
    Message Edited by michaels on 05-Oct-2009 03:31 PM
    Roberto Dapino
    http://www.stormvision.it/blog

    hi olandesevolante
    about ur first and second issues u face they r not realy bugs, why?
    for the first one:  i faced that with my E51 in a place i visited before, that hidden WLAN maybe a conflict from another type of waves other than that of wlan using same frequency
    and about the second issue:  default phone numbers is a feature that only set for making calls but when u make an sms the phone will ask u to choose between numbers present unders the same contact name even if u set a default number, so it is not a bug but that is the normal firmware properties
    for the rest of issues , they sound like real bugs
    i hope i helped a little and i wish those bugs will be removed in the next firmware
    Message Edited by michaels on 05-Oct-2009 03:31 PM
    Phones I bought from 1st till now:
    3210 / 3310 / 3410 / 6310 / 6600 / 6020 / N72 / E51 / X2-00 / 5310 xpress Music / E90 Communicator
    If you like my post or it helped you, Give me Kodo

  • Firmware bug: CPU1 tried to use APIC500

    Every time I want to use the computer (HP Compaq  6005 Pro small form factor) I have to switch it on and then push the reset button after booting up to a black screen.
    I once got :
    Firmware bug: CPU1 tried to use APIC500 (LVT offset0) for vector 0x400 but the register is already in use for vector 0xf9 on another CPU.
    Any ideas?
    Is Linux reporting a real firmware fault or is it wrong?

    Hello anonio-mouse,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are getting the [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu. I have looked on the Ubuntu site and under the Bugs section I found the bug [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is alrea... so it looks to be a geniune error and is being addressed on the Ubuntu site.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Enjoy your weekend!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Firmware bug? No Connect/Disconnect button on "Manual" PPPoE option

    Hi,
    To the best of my knowledge this is a firmware bug.
    There is no Connect/Disconnect option when choosing "Manual" from the PPPoE settings.
    There are two related (unanswered) posts:
    http://discussions.apple.com/thread.jspa?messageID=8166971&#8166971
    http://discussions.apple.com/thread.jspa?messageID=8137893&#8137893
    Is there an official way to report such a bug?
    Does anybody have another solution?
    Thanks,
    Omri

    I reported the bug and got this response:
    This is a follow up to Bug ID# 6286922. After further investigation it has been determined that this is a known issue, which is currently being investigated by engineering. This issue has been filed in our bug database under the original Bug ID# 5847755. The original bug number being used to track this duplicate issue can be found in the State column, in this format: Duplicate/OrigBug#.

  • Firmware bugs

    Hello!
    I found three firmware bugs and already informed the hotline about one of them in january. It is not fixed in firmware 1.1, so I am posting here.
    The first, already reported, bug can be seen with German language setting when configuring the alarm clock. The dialog where you can enter the desired alarm time shows am/pm time although the other time options change to 24h display when setting the iPod to German.
    The second bug is inside the game Solitair. Very often you can't move a card to the "finished" stack, although it matches perfectly. For example you can move a red four on top of a black five, but not on top of the (matching) red three at the top.
    The third bug is inside the game Brick. I noticed sometimes the ball does not get faster over time which makes it very easy to go through all levels. In fact after some time the first level re-appears.
    The following facts are annoying, but I don't know if I can call them bugs.
    a) My computer very often loses the connection to the iPod while transferring (large) files. I am using opensource software (Linux, gtkpod), so it might be something to preven t users from using non-supported hardware.
    The first message indicating the problem is
    "Nov 26 13:38:13 carsten-otto usb 1-3: reset high speed USB device using ehci_hcd and address 71" just after the transfer stopped. This message repeats some times and then everything gets messy.
    b) Videos stop playing with sound after some time. I did not try with official videos yet, but my self built videos do meet the requirements and should play. After about ten seconds the video stops for about 5 seconds and then starts again, but from now on without sound. Whenever I seek to a new position I can have sound again, but only for another ten seconds.
    Please tell me how to solve the problems and/or how to contact Apple so that they can help me.
    Thank you,
    Carsten Otto

    The Video issue I am having, and I believe all people are having with 5th Generation Video IPODS. I've installed probably 8 or 9 programs over the last two days, hoping to find one that doesn't screw up the video/sound after a few minutes.
    It's interesting because none of the Video Podcasts seem to have a problem running on it, but some information regarding how this is working for Video Podcasts but nothing else is missing. I would hope a firmware upgrade is in the works to fix this problem, because if not I anticipate a large recall, and I think this would be bad publicity for Apple, at a time when many competitors are biting at the bit to take a share out of the market.

  • Nokia 5320 XM firmware bugs concerning date and al...

    Hello!
    Although already having twice sent in my Nokia 5320 XpressMusic for repair, I'm still suffering from severe firmware bugs concerning date and alarm of the device. Here some information on when and how the bugs are showing themselves:
    Settings: A different weekly alarm is programmed for each day of the week. The phone is being switched off for the night.
    The programmed alarm is being run correctly by the phone. The phone is being switched on after having disabled the alarm.
    Some time later the date changes to four or five days in the future. Moreover the phone starts to ring for the day the date has changed to. Often it's not ringing at the time that has been programmed for that day, even though pretending to do so.
    Example:
    9:45 on Sunday: phone is correctly ringing at the programmed time. 
    10:15 on Sunday: phone is incorrectly ringing again pretending it was Friday 7:50
    the clock remains unchanged, however the date has changed automatically for five days
    Linked to this error, there seem to exist similar problems with date and snooze-function already mentioned on these forums:
    /discussions/board/message?board.id=smartphones&message.id=145323
    /discussions/board/message?board.id=smartphones&message.id=144139
    /discussions/board/message?board.id=smartphones&message.id=143893
    As I mentioned above, I already sent my phone in twice, however I always got it back with the mention: repaired on guarantee. To me, this seems rather disgraceful for Nokia. I sincerely hope, that, if necessary with the pressure of other users being concerned as well, we arrive to get a phone that is really working as one could await it from the leader in mobile phone production!
    I hope we will be informed soon about when there will be a firmware update!
    Thanks for your replies!
    Regards,
    Lorenz

    Have the same problem, as I already mentioned in my posts too. But unfortunatly no reply from Nokia either. Seems they really don't care about it. It would be at least apropriate, that they at least announce time of new firmware and note if they will fix this problem with it.
    But no replay from them   I contacted local nokia dealer in Slovenia, but they just say they can not help. And that we must wait for new firmware.
    Now I wonder, when it should came out ?! I am sick of this trouble with my phone. and as you said, I am also turning off my phone since I want my battery to last longer. so this bug must be fixed.
    Nokia team, anyone?!?!?  

  • 6220c firmware bug?

    Updated firmware to 5.15 in my 6220 classic yesterday. After some memory card trouble, it now seems to work, with one exception that I have noted. If I do *#0000# and then options/check for updates and select my usual ISP, I get a message saying "system error". Other ways of accessing Internet work fine with this ISP. Could this be a firmware bug?

    i have same problem with my 6220c firmware 5.15,and i have reflashed the firmware twice still same problem,i am unable to watch mobile tv on my tv screen via tv out cable,the voice works fine on tv but there is no picture except a key with a slash in blue background on my tv,and its almost a year now since nokia released a new firmware for 6220c generic and other phones like 5800,5530,n79,n97,n96 etc has goten 2 or 3 firmwares each 2009/2010

  • IPod Firmware bug?

    Hi.
    I just bought an iPod Nano 2Gb Black about 1 month ago.
    But unfortunally it has started to "hang" at the star ratigng system. If i go to that option, i can't make i disappear. :S I keeps showing that screen even though i push the center button.
    Is this a Firmware bug, and how do I fix it? It's ******* me off that an only 1 month old iPod already screwed me like that.
    //CV-DK

    This is a known bug with some iPod models, including yours.
    You'll need to update your iPod to the newest firmware using the latest iPod Updater Utility to resolve this problem.
    Additionally, since you have a Nano, you may want to post future topics in the Nano forum instead of the 5th Generation iPod forum.

  • N85 v20 Firmware bug Fix

    v20 firmware bug
     When i plug it into charger  charging start but afterwhile phone just turns off.
    And Navi whell is not work in menu
    I recive a connection error when i try to call.
    When i go to gallery menu my phone automatic back on main menu?
    Message Edited by fensms on 16-Jun-2009 10:27 AM

    If a hard reset does not solve the issue then you only other option is to send it to a Nokia Care Point. You can find your nearest
    Nokia Care Point at:
    For UK
    http://www.nokia.co.uk/A4228006
    For Europe:
    http://europe.nokia.com/A4388379
    For Asia-Pacific
    http://www.nokia-asia.com/A4416070
    Elsewhere:
    http://www.nokia.com select your country, go to the support section, then select repair.
    Message Edited by cjlim on 16-Jun-2009 10:53 AM

  • RV082 RV042 RV042G v4 firmware bug?

    Models affected:  RV082 v3 (primarily)  -  also RV042 v3 and RV042G
    Symptoms:
    1) web admin GUI stops responding
    2) internet speed slows or stops completely
    Temporary Fix:
    1) power-cycle the router, everything works fine for a random period of time
    Notes:
    1) happens after a month or so for RV082 that is giving me trouble.
    2) seems to affect a large number of units but not all units
    3) this has been going on for a YEAR OR MORE without resolution
    4) also, I can only program this router with IE - for firefox, I can't get past the certificate warning and to the login prompt.
    5) could this be related to https login and broken code regarding SSL certificate or its integration into the web GUI?
    6)  yes, I have reset the unit to factory defaults and reprogrammed
         yes, I have tried different firmware revisions
         yes, I am on the current firmware
         yes, I have re-issued the SSL certificate
    Maybe the team writing the firmware could get their hands on some of the reported units with these issues and see how they behave, figure out what the real problem is so we can stop beating our heads against the wall?

    What Samir said...
    FWIW - here's what I've settled on:
    RV042 v1 with the last v1 firmware.  I have a couple clients with these.  I want them to die but they won't, so they are still running fine. Some develop that squealing sound in the power supply section.  Had one or two fail and upgraded to RV082
    RV042 v3 (not sure which firmware)  I had one client with this, NEVER had an issue
    RV042G - never tried one, and I don't plan on it  (maybe an RV320, although I prefer rackmountable units)
    RV082 v1 with last v1 firmware (v2 firmware will break it) -  several of my clients have these, and I use one at home.  They just run and run and run, and occasionally one might need to have the CMOS battery replaced.  I just configured one of these with a Dual-WAN and it works great.  I prefer the v4 firmware UI that comes on the v3 units.
    RV082 v2 = JUNK!!
    RV082 v3 - firmware v4.1.1.01-sp is stable and has been running one of my clients for 2 years no issues.  firmware v4.2.3.03 came loaded on a new one that was purchased in 2014 and that has also been running fine.  The first gets heavy internet use with skype, audio streaming, websites.  The latter has 9 VoIP phones (phonebooth) behind it and using bandwidth priority rules to share a 800kb upstream. 
    ** v4 firmwares are unified across all v3 hardware (RV042, 82, 42G) - I only trust the two versions listed directly above.  If you change/update to one of these firmwares to resolve issues, reset the router to defaults, flash the firmware, maybe reset it to defaults again just to be sure, and then program it from scratch.  Save your config from the stable firmware and then you can use that to reload if you do more resetting later.
    RECOMMENDATIONS:
    **  I love that the RV082 is rackmountable, has an internal PSU, and has an 8-port switch.  It's only a few bucks more so just forget the RV042 and get the faster/better option.
    ** The RV325 is a compelling successor to the RV082.  (basically an RV082 with Gigabit ports).   It has better firewall throughput and processing, also has newer features for QoS and multiple DHCP on several vLANs.  I picked up one last year to replace an RV082 but I figured out a solution before swapping the routers.  I haven't been brave enough nor had enough time to give it a real test yet.  Hoping to do so soon.  It has external PSU which is not so great but I can deal with that - at least it's rackmountable.
    (I have retracted my comment about the ISA series.  I configured one running on early firmware and was impressed, but evidently they had issues and Cisco stopped making them after a relatively short run, which is a bad sign).

  • N8 Anna FM radio transmitter

    I have another problem.
    When I start transmitting FM radio with my N8, there is no problem, but when i turn off radio transmitter it looks like it doesn't go completly off. Every few minutes the message comes up on my phone "Play via radio deactivated". If I restart my N8, than it is OK.

    The device probably only has a one year warranty.

  • Ipod and radio transmitter

    I have a vid-ipod and I can't find any AM radio transmitter...y is that?...only FM transmitter...I like to change the mood once in a while by listening to sports radio...

    Sorry. I've just realised you said AM not FM. Nevertheless, here it is.
    http://www.apple.com/ipod/accessories.html

  • WRT120N Latest firmware BUG & PATCH

    Hello,
    I just bought a WRT120N Wireless Access Point. I upgraded its firmware to the latest available (v1.0.04) but there is a BUG in the "Applications & Gaming" section. In particular, in the "Single Port Forwarding": two applications with the same internal port, even with different IP addresses, can be added and the error message is "Port Number is duplicate.".
    This behavior is incorrect and can be explained with an example: let us assume we have two web server behind the NAT. Both are listening on the default port 80/tcp and have address 192.168.1.2 and 192.168.1.3. It is possible to forward the data received by the router on port 80/tcp to the web server 192.168.1.2 and the data received by the router on port 8080/tcp to the web server 192.168.1.3. This is allowed because everything is unique: if the router receive a packet on port 80/tcp it have to rewrite the destination IP address and insert 192.168.1.2 while if it receive a packet on port 8080/tcp it have to rewrite the destination IP address and tcp port (192.168.1.3 and 80). It is irrelevant that final port destination is the same. Of course, it is important that the two rules have a different external port: otherwise the router could not distinguish between them but the internal port is irrelevant (as long as two rules are not identical).
    The BUG is circumscribed in the JavaScript since I tried to "nop" the wrong check with Firefox/Firebug and the rules are correctly memorized in the configuration and they works without issues.
    I Fixed the JavaScript and, in the following, there is the patch. Actually, this patch does not solve another minor BUG: theoretically it is possible to redirect two different external ports to the same couple internal IP/port. The solution is trivial too, but this would require rewrite a larger portion of code, so I decided to not fix this minor BUG because it is less severe and the scenario is less common.
    This BUG seems tightly related to http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&message.id=85768&query.id=245618#M85768 but that one is on another router/firmware (that I do not own) so I do not know if this patch apply to that BUG too.
    Please let me know if you need further informations
    Marco Papa Manzillo
    ----------- Patch -------------
     diff -ur 192.168.167.1 2/index.htm 192.168.167.1/index.htm
    --- 192.168.167.1 2/index.htm   2010-01-05 13:39:59.000000000 +0100
    +++ 192.168.167.1/index.htm     2010-01-05 14:32:00.000000000 +0100
    @@ -535,9 +535,10 @@
     var fNameHead = "gport_external";
     var fNameTail = "gport_internal";
    +var fNameIP   = "private_ip4_";
     var applicationName = "application";
     var appname = "";
    -var i, rs, rs2, j, index, numProtocol, temp;
    +var i, rs, rs2, j, index, numProtocol, ipv4_private, temp, temp2;
      for (i = 0; i < F.elements.length; i++) {
     f = F.elements[i];
    @@ -548,11 +549,15 @@
     continue;
            }else {
     temp = "protocol" + f.name.substring (fNameTail.length, fNameTail.length + 2);
    +temp2 = fNameIP + f.name.substring (fNameTail.length, fNameTail.length + 2);
     }else {
     temp = "protocol" + f.name.substring (fNameHead.length, fNameHead.length + 2);
    +temp2 = fNameIP + f.name.substring (fNameHead.length, fNameHead.length + 2);
     numProtocol = document.getElementsByName(temp)[0].value;
    +ipv4_private = document.getElementsByName(temp2)[0].value;
    +
     if (f.value.length == 0)continue;
    @@ -584,7 +589,7 @@
     if(rs2=="1") break;}
    -rs = checkDuplication_PortRange3 (F, f, numProtocol, fNameHead, fNameTail, 0, 15);
    +rs = checkDuplication_PortRange3 (F, f, numProtocol, ipv4_private, fNameHead, fNameTail, fNameIP, 0, 15);
     if (rs == true||rs2 == "1") {
     alert (msg_alert_0038);
     //f.value = f.defaultValue;
    diff -ur 192.168.167.1 2/jslib.js 192.168.167.1/jslib.js
    --- 192.168.167.1 2/jslib.js    2010-01-05 13:35:03.000000000 +0100
    +++ 192.168.167.1/jslib.js      2010-01-05 15:27:11.000000000 +0100
    @@ -549,19 +549,21 @@
            return false;
     //rob. 2009.0325 also check protocol type when submit form.
    -function checkDuplication_PortRange3 (F, f, numProtocol, fNameHead, fNameTail, startCount, maxItem)
    +// Marco Papa Manzillo 2009.0105 also check internal IPv4 for internal port when submit form
    +function checkDuplication_PortRange3 (F, f, numProtocol, ipv4_private,fNameHead, fNameTail, fNameIP, startCount, maxItem)
            if (fNameHead.length == 0)      return false;
            if (fNameTail.length == 0)      return false;
            if (f.value.length   == 0)      return false;
            var fPort1 = new Array (null, null, null, null);
    -       var tmpName1, tmpName2;
    +       var tmpName1, tmpName2, tmpName3;
            var fProtocol = "protocol";
            var tmpProtocol;
    -       var a, a2, b1, b2, ck=0,rs;
    +       var a, a2, a3, b1, b2, b4, ck=0,rs;
            a= parseInt (f.value);
            a2=parseInt (numProtocol);
    +       a3=parseInt (ipv4_private);
            tmpName1 = "";
            if (f.name.substring (0, fNameHead.length) == fNameHead)
    @@ -575,19 +577,21 @@
                    tmpName1 = fNameHead + i;
                    tmpName2 = fNameTail + i;
                    tmpProtocol = fProtocol + i;
    +               tmpName3 = fNameIP + i;
                    if (f.name == tmpName1 || f.name == tmpName2)   continue;
    -               rs = DynamicGetField (F, 3, tmpName1, tmpName2, tmpProtocol, "", fPort1);
    +               rs = DynamicGetField (F, 4, tmpName1, tmpName2, tmpProtocol, tmpName3, fPort1);
                    if (rs == false)        continue;
                    b1 = (fPort1[0].value.length == 0) ? 0: parseInt (fPort1[0].value);
                    b2 = (fPort1[1].value.length == 0) ? 0: parseInt (fPort1[1].value);
                    b3 = (fPort1[2].value.length == 0) ? 0: parseInt (fPort1[2].value);
    +               b4 = (fPort1[3].value.length == 0) ? 0: parseInt (fPort1[3].value);
                    if (ck==0)//check tail
    -                       if (a == b2)
    +                       if (a == b2 && a3==b4 ) // Internal IP must be checked only for internal ports.
                                    if ((a2 == 99)||(a2 == b3)) return true;

    First of all I would suggest you to reset the router for 45 seconds and reconfigure all the settings again as you have upgraded the router's firmware.
    What is the IP address you are getting from the modem...?
    What happen when you connect the computer directly to the Modem..?
    Do not load the backup config file on the router.After resetting the router,reconfigure all the settings again.

Maybe you are looking for