N78 keypad left/right keys sometimes not respondin...

Hello there ...
I faces some problems with the left/right Selection keys.
they sometimes and for no reason don't respond, first i thought it is a problem with the keypad itself, so by pressing a little harder it would do the trick, but that's not the case.
this bug occured in several applications/places.
i have the latest firmware:
Software Version: 12.046
Software version date: 25-06-2008
Custom Version: 12.046.051.1
Custom version date: 25-06-2008
Type: RM-235
Latest Update: 24/2/2009
Nokia n78-1 RM-235
product code 0514523
firmware 30.014

thank you for replying...
the latest version for my region is already installed.
there is another problem which i forgot to mention, it's very annoying too!
the right key most of the time goes to the main phone screen when i press on it to go back/cancel when inside any tool/application or webbrowser.
sometimes it just behaves like the Hangup button when pressed!
is this a software problem ?
or may this be a faulty keypad ?
thanks in advance!
Nokia n78-1 RM-235
product code 0514523
firmware 30.014

Similar Messages

Command Option Left/Right Key Doesn't Work

10.6.8 Snow Leopard,
Command+Option+Left/Right Key stop working.
I couldn't move tab, or play previous movie file nor next one.
http://codereview.chromium.org/273032
I've tested the other keys work, but just CMD+OPT+Left/Right Arrow hadn't.
Is there any quick repair or solution?

10.6.8 Snow Leopard,
Command+Option+Left/Right Key stop working.
If this is not in the standard apple keyboard shortcuts and not something you added to the Keyboard Shortcuts preferencs then it's an app specific extension and not Snow Leopard's (i.e., Apple's) problem.

Left/right Keys appear to be stuck

Here's the problem:
I'm not sure what exact keys are stuck, but it appears that my computer is receiving constant left/right input. It only appears in certain areas though. For instance, a Finder window will constantly shift left and right. This also occurs in the main iTunes window. Drop-down menus are unusable... as soon as I click on them, it immediately selects an option. But right now, as I type this, I can hit the left and right keys and it works just fine.
I've tried restarting, unplugging and plugging in my keyboard, as well as making sure my software is up to date.
Thanks for reading this.

Welcome to Discussions - that sometimes happens to me as well, to fix it I right-click on purpose, and then select one of the choice, then the right-click goes away again. You can also re-start.
Let me know what worked,
Miriam

Left arrow key does not go back one character at a time

on my key pad, I cannot backup "over" characters one space at a time I am not looking to DELETE, merly to backup one character at a time. I know I can use the function key along with the arrow key for word at a time jump. I can jump one character to the right by pushing that key but I cannot do that with my left arrow key. slight annoyance, but I swear it worked before. . .

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4 and later.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

Keyboard navigation with left right keys for a ring

Hello,
is it possible to use the left/right keyboard keys to control a ring? They do not appear in the keyboard-navigation properties.
It has to work that way, that I can move with the keys through the ring-entries and select the desired entry with <enter>
Many thanks in advance,
Magnus

Hi Magnus,
Sorry, I haven't found how to do exactly what you're asking for... I made a small VI in which if you press "left" or "right", the ring gets the "key focus" and then you can "scroll" the value with the up/down arrow, but you can't see all the value like if you actually clicked on it...
Hope this helps...
BTW, I don't know in which context you are using LabVIEW, but this point is - IMO - not worth spending hours
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
Untitled 1.vi ‏18 KB

Left command key does not work

Hi all,
I have problems with my left command key. I have had my computer for 1 year now - the fan wasn't working so I reset the PRAM, didn't work so sent it to the Apple technicians who replaced the fan. Since then, I am unable to combine the left command key with any of the 3rd keyboard row keys such as "C", "V", "N" or "X". Consequently I cannot copy, paste or get a new window. It occurs with all applications. The right command key works fine. The top and middle keyboard rows work fine with the left command key. Is this a software problem or should I return it to the Apple technician?
Thanks,
Vincent.

Take it back. They either haven't got the keyboard connected in right when they put it back together, or there is problem with the keyboard itself.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

Touch pad/left-right key

Pavilion dm4. Right click button not working part of the time. Mouse works good. Is there a setting or fix for this problem.

After installing WinXP did you install the VMWare drivers? I'm not sitting at my computer so I can't look at VMWare to see which menu it is under but there is a VMWare extra program to install so that WinXP can use the Mac's special features. That should solve your problem. If not, head over to VMWare's support site - I've generally been able to find answers to my questions there.

[HW Problem] Some numbers and left and right keys are not working

Numbers one, two, three, four, eight, nine, zero, left, down, and right arrow keys constantly stop and start working. This also happens in the BIOS. I have to remove the keyboard, the hdd, and do a reboot to get them working.
Device:
Dell Inspiron 1121
Intel Core i3 330UM Processor 1.2GHz
2GB DDR3 RAM
250GB HDD
>uname -a
3.12.4-1-ARCH #1 SMP PREEMPT Sun Dec 8 21:18:00 CET 2013 x86_64 GNU/Linux
>df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 19G 8.9G 8.8G 51% /
dev 933M 0 933M 0% /dev
run 935M 748K 935M 1% /run
tmpfs 935M 2.2M 933M 1% /dev/shm
tmpfs 935M 0 935M 0% /sys/fs/cgroup
tmpfs 935M 36K 935M 1% /tmp
/dev/sda4 114G 47G 61G 44% /home
>pacman -Q | grep xf86-input
56xf86-input-evdev 2.8.2-1
xf86-input-joystick 1.6.2-2
xf86-input-keyboard 1.8.0-1
xf86-input-mouse 1.9.0-1
xf86-input-synaptics 1.7.2-1
xf86-input-vmmouse 13.0.0-2
xf86-input-void 1.4.0-5
>lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0)
02:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 [Kilmer Peak] (rev 5e)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Is this a hardware problem?
Last edited by jjshinobi (2014-01-15 02:08:51)

jjshinobi wrote: This also happens in the BIOS.
Then I wouldn't think it's to do with the Arch, updating does not stop parts of the keyboard working for the bios as it's separate firmware. When you can access the bios after first turning on, your PC has not yet accessed the hard drive to load the drivers for the operating system yet. Also as far as I'm aware Arch (or any other operating system in fact) has never updated the bios firmware.
Last edited by Kartious (2013-12-17 14:04:18)

Safari 5.1 hotkeys with left/right arrows are not working!

I had my redefined hotkeys in Safari 5 for Select Next/Previous Tab (they were cmd+right/left arrow)
When I've updated to Safari 5.1 hotkeys stopped working that way, and now they are acting like Back/Forward
But Back/Forward are cmd+[ and cmd +]
Anybody with the same problem?
P.S I've tried to delete com.apple.safari.plist - no result

I ran into the same issue.
Had to go into the Keyboard pref. pane and reassign the tab ones to shift-arrow keys

Front Right Speaker Sometimes not Making a Sound, P5800

Hi,
I have the Creative Inspire P5800 Speakers. Every so often, the sound that my front right speaker makes is very faint. It happens all of a sudden, the only way to fix it is to calibrate my speakers from my Sound Card settings a couple of times before it returns to normal and then it does the same thing again later. My Sound Card is Creative Audigy 2 ZS. This has only started happening when I had to disconnect my cables from the back of my computer as I had to install a new hard drive and install Windows XP and drivers again. My cables are properly connected as I did a Speaker Channel Test and the calibrator reports no miswired cables. Does anyone know how I can fix this?
Thanks in advance.
Message Edited by Cypher_489 on 08-20-2005 07:57 PM

Follow basic troubleshooting found in your user Guide for your phone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Webpage displayed using Adobe Flash is cropped on left, right & bottom, but not when using Chrome or IE.

A webpage I use to display the data for my solar panels uses Adobe Flash and it used to display OK, but several versions of Firefox ago it became truncated on three sides so you can't see the whole thing. I can post a picture that shows all three browsers displaying this page and it is cropped only in Firefox. I'm running the latest Firefox (27.0.1) and Adobe Flash. This has been going on for at least one year. I don't notice the problem when I'm at home, but only when I'm at work. In both cases I have dual 1920x1200 displays. I have tried turning off hardware assist, but that changes nothing.

You can also try to right-click the Flash object to see if this object is zoomed.
You can try to clear the Flash local storage and settings for this web page.
*Windows Control Panel > Flash Player > Storage: Local Storage Settings
**Remove a specific domain: Local Storage Settings by site
**Remove all domains: Delete All and Delete Data
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

Left & Right audio channels not linked...

I upgraded my system and had to re-install FCE from scratch and (of course) I lost all my system preferences and filters & such. My one annoyance now is that my audio channels (L & R) are now independant of one another -- if I lower one, the other remains unchanged and then I have to go lower it as well. Is there any way to re-link the two audio channels together? It was like that on my old system.
Thanks.

That much I figured out -- is there any way to make that a permanent setting when I capture? That's the part that's escaping me. Thanks for your help, BTW.

Red Eye tool: up is down, down is up, but left is left, right is right.

Anyone else notice this oddity? When using the Red Eye Reduction tool, if I drop it on someone's eye and then use the keyboard arrow keys to move it around, the effect moves up when I push the down key and down when I push the up key (exactly like the Crop tool acts, like you're moving the photo within a matte) but the left/right keys are not reversed. This just seems a little odd to me. Anyone else noticed this? Is there any way to change it?

Odd, must have been a 1-off bug. It's not doing it today on my machine. It was doing it all yesterday and confusing the hell out of me.

Caps lock and left command keys not working / unresponsive. Help!

Just happened today. I admit due to exhausted I have been neglecting to turn off my laptop and it ends up getting the comp battery drained. I have a 2011 Macbook Pro. I checked the keyboard > Show Input Viewer, only caps lock and the left command keys are not working. Please help!! Is my laptop dying? Is there a way to fix this via terminal?
Thanks in advance!

Keyboard Doesn’t Work
Keyboard Keys Do Not Respond

Cursor keys do not properly change to next/previous image

Since a few days, one of my two Lightroom-computers shows a permanent, quite annoying bug, regarding the curser left/right key:
It happens in loupe view:
When I press the cursor-right key, Lightroom doesn't change to the next image
Instead, it doesn't stop changing to the next image before it reaches the end of the folder .
Correspondingly with cursor-left, which takes me always to the first image in of the folder...
Browsing in loupe view is nearly impossible, just the mousewheel still allows to change to the next/previous image.
This happens for all sets, catalogues, folders, etc. If I have selection, then it takes me to the first/last image of the selection, nothing in between possible.
Any advice, what went wrong with my system? Everything was smooth a few weeks ago, and everything works fine on my other computer, which should just behave the same...
Thanks for any hints!
Harald

After hours of testing, I identified the reason:
The problem was raised by the service "skdaemon.exe".
It's meant to be a keyboard enhancing utility, which was preinstalled (und later updated) on this computer.
After deactivation (from autostart), LR works fine again, and I didn't notice any missing keyboard functions yet.
Maybe, this helps someone else in getting around that problem, and thanks for the support.
Harald

N78 keypad left/right keys sometimes not respondin...

Similar Messages

Maybe you are looking for