N78 Pre-Install Dictionary Solution (work database...

Dear all,
I have been searching for the solution how to restore the pre-installed dictionary for my N78. My MicroSD card occurred ASCII code (special characters)/funny wording after perform restore from my previous backup copy.
It seems that my backup copy is corrupted and I am not able to access to all applications, musics, pictures, and etc that installed in the Memory card (MicroSD card). The last choice is to format my MicroSD card by using my mobile phone (format using computer may have trouble when install certain application, study from the internet format using computer will use different form of format.
After searching through the web and go through a lot of forums and discussion. Finally, I can get it done and back to normal.
Solution for N78 Pre-Installed Dictionary:
1) When change new MicroSD card, and open Dictionary, it prompts to install word database.
2) When download and install dictionary, it prompts to install base package.
1) Go to http://www.nokia-asia.com/A4429895 (English-Simplified Chinese Dictionary 汉语双向词典), click Download Now.
2) Follow the instruction
OR
If above steps cannot work out, try below steps: (Tested on N78)
1) Go to http://www.nokia-asia.com/A4429895 (English-Simplified Chinese Dictionary 汉语双向词典), click Download Now.
2) Save the file .zip at Desktop.
3) Extract the files to Desktop
4) You will find private -> 101f9cfe after you extracted the files.
5) Connect you mobile with USB cable, connect as "Mass Storage".
~ Note: It will not allow you to see/create "private" folder when connected as PC SUITE.
6) Once your mobile connected as "Mass Storage", in Windows Explorer, you can see "private" folder.
7) Copy private->101f9cfe from destop(Computer) into the private folder(your mobile memory card).
8) Try to open the Dictionary. It will back to normal.
I believe it also works for other phone model. No harm to try it out.
Good luck!
Cheers,
Vinx

you had the Dictionary application preinstalled on your N78? i too have a N78 but never could get the Dictionary application to work
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Similar Messages

Pre-install mysql doesnt work!

I try to start pre-installed mysql with "mysql start" log shows "ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (38)", then I create a subdirectory /var/mysql/ owned by root:wheel and grant 777 to it. still not working. Anyone knows how to fix it?

See if the information in this thread helps: http://discussions.apple.com/thread.jspa?messageID=12163732

Error when installing Lenovo solutions for small business [Screenie included]

Hello everyone.
Recently, I tried opening the pre-installed Lenovo solutions for Small Business software on my Lenovo e530 running Windows 7 Professional 64-bit version (Upgraded from Win 7 Home Prem 64-bit) but failed after getting a message for encountering a critical problem of some sort. I then tried restarting my computer and that did not solve the problem. And then, I decided to install an upgrade version of it from this website http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS030146. But before that I uninstalled the previous version by uninstalling Intel Small Business advantage customizations with Revo Uninstaller and I deleted all the related folders too with a thorough scan. Out of my expection, I got this message below saying that I could not proceed due to some unspecified error. Has anyone encountered the same problem before? Does anyone have a solution for this? I'm not sure if that's my computer's problem or from the driver itself. Thank you for your attention to this issue.

Hi, dougy
This should be configurable under msconfig. This is a program that you can use to tell your computer which programs you want to start when Windows starts. To get to this program, type msconfig into the search bar in the Start menu. A window should appear. Check under the Startup tab and make sure that the Lenovo Solutions for Small Business program does not have a checkmark next to it. This should prevent this program from starting up when your computer turns on.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Install Lion on second computer from pre-installed version on new laptop

Hi,
I just purchsed a new Macbook Air with Lion already installed - it is a great machine!
Now, I have an iMac on my desk that is 4 months old. I'd really like to upgrade it to Lion. My understanding is that we're allowed to install Lion on a second machine. But, since my only copy came pre-installed on my Macbook, I don't know how to do this?
I've seen many tutorials about making an installation DVD or USB key from the purchased version of Lion. These dont' seem to apply to my pre-installed version.
How can I install Lion on my second machine?

...My understanding is that we're allowed to install Lion on a second machine. But, since my only copy came pre-installed on my Macbook, I don't know how to do this?
You are allowed to install on multiple machines in your house when you purchase from the Mac App store. Pre-installed copies of Lion do not qualify since the purchase is not listed in your Apple account. Think of it like how you would buy the "family pack" of OSX in the past. Just that now it costs $29 instead of $49.
If you're looking at the instructions on how to make a bootable DVD, then they're telling you to look for a specific file. (Hint, hint.) Since these Lion preinstalled Macs have just come out, it's going to take a while before people figure out where the files(s) are, and so have time to update their instructions. This is assuming it's even possible since Apple has always prevented the disks supplied with a machine to work with anything other than the same model. Only "retail" versions of OSX would work on multiple models of Mac, and what you download from the Mac App Store is a "retail" version of OSX. So it would not surprise me if the files on the pre-installed Lion only work on the same model Mac as well. (IOW, the installer may only work on 2011 MBAs since that is what you have.)

Delete a record in MDT Database from WinPE during Pre install

Hello Experts,
This is my requirement
1) MDT Deployment database will be updated with MAC address of new laptops.
2) All new laptops will be pre-configured with PXE booting as primary boot option. (When the MAC address is not available on Deployment DB, System boots via hard disc).
3) Deployment Tool Kit (MDT) will deploy the image to all the MAC addresses available on deployment DB (Step 1)
4) After deployment, database entry for corresponding laptop should be deleted automatically such that system boots via hard disc
Is there any way to delete a record from MDT database in Pre-Install step of the task sequence, such that Laptop boots from the hard disc after restart from PE install? Idea is to delete the record of corresponding laptop after PE install such that PXE boor
doesn't pick up anything from the share.
Regards, karthik.

Basically, this would be the same effect if you have a PXE advertisement for a certain number of machines. And your PXE advertisement is always mandatory, except you only want to install machines which occur in the database. Why no try to solve it in another
way? Because this is very devious.
If this post is helpful please click "Mark for answer", thanks! Kind regards

Elements 12 pre-installed on new Sony Vaio Win8 not working. Error: 16, No disk to reinstall. Any ideas to make it work?

I have a Sony Vaio Fit 14 laptop that has Windows 8 and pre-installed Photoshop Elements 12.
The Photoshop elements 12 is giving me an error 16 and I can not get it to work.
I have no installation disk and really do not want to restore the laptop to factory out of the box.
Is there any other way to fix this issue?
Thanks,
Jeff

Probably you could get some help from Sony. Possibly the install image is somewhere on your computer or they could give you a copy.

HT2693 How do you contact Apple by email to report one of their pre-installed iPad Apps (ie Calender) is not working properly?

How do you contact Apple by email to report one of their pre-installed iPad Apps (ie Calender) is not working properly?
On trying to open month of March 2013 the pre-installed calendar just shuts down and closes. Have tried restarting iPad but this didn't help and because its a pre-installed App am unable to re-install it. Is this a universal problem or just affecting me? Tried searching for support in both App Store and on Apple site and can't see how to report this.

Feedback
http://www.apple.com/feedback

All Apps not working except for Apple pre-installed Apps

Last night I installed a couple of new apps from the app store and a few podcasts through iTunes (using sync). Phone worked fine afterwards, including the new apps I installed. This morning I noticed that when I try to run an app it starts to load and then immediately closes and returns to the phones main screen. After trying to launch several different apps, I realized that the only apps that will run are those which came pre-installed with the phone. None of additional apps (free or purchased) will run. Has anyone ran into this problem? I have tried resetting the phone, no change. The only other thing I can think of is to restore my phone from the back-up. Could this be a virus? Any thoughts would be greatly appreciated.

There's another thread on the same problem here -- http://discussions.apple.com/thread.jspa?threadID=2226619&tstart=15
I've been able to solve the problem (short term basis, it does re-occur) by deleting a purchased app (any app, even a free one) then repurchasing it from the phone.
You do need a data connection (3G or WiFi) for this to work, of course.
This is very much a kludge. I hope Apple can get this fixed, it really is a PITA, especially if you are travelling and use the phone as a PDA and phone.
I hope this helps.
coop

N5548P with NX-OS 5.0(3)N2(1) wont work with 2248TP and 2232PP with pre-installed Fabric Extender OS

Hi,
We recently bought 2 N5K and 4 N2K Fabric extenders, now we are having problem installing the fabric extenders as the FEX just wont go up.
switch(config-fex)# sh fex 100 detail
FEX: 100 Description: ADM/128-SVF-NS302   state: Offline
FEX version: 4.2(1)N1(1) [Switch version: 5.0(3)N2(1)]
FEX Interim version: 4.2(1)N1(0.002)
Switch Interim version: 5.0(3)N2(1)
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static    Max-links: 1
Fabric port for control traffic:
Fabric interface state:
    Po3 - Interface Down. State: Configured
    Eth1/7 - Interface Down. State: Configured
    Eth1/8 - Interface Down. State: Configured
    Eth1/9 - Interface Down. State: Configured
    Eth1/10 - Interface Down. State: Configured
Fex Port        State Fabric Port
Logs:
11/22/2011 07:49:23.536463: Offlining Module
11/22/2011 07:49:23.564858: Deleting route to FEX
11/22/2011 07:49:23.572372: Module disconnected
11/22/2011 07:49:23.573795: Offlining Module
11/22/2011 07:50:34.741573: Module register received
11/22/2011 07:50:34.742363: Image Version Mismatch
11/22/2011 07:50:34.742496: Registration response sent
11/22/2011 07:50:34.742741: Requesting satellite to download image
11/22/2011 07:52:55.922414: Image preload failed.
11/22/2011 07:52:57.91269: Deleting route to FEX
11/22/2011 07:52:57.106904: Module disconnected
11/22/2011 07:52:57.108092: Module Offline
11/22/2011 07:52:57.110203: Deleting route to FEX
11/22/2011 07:52:57.115149: Module disconnected
11/22/2011 07:52:57.116546: Offlining Module
11/22/2011 07:52:57.150559: Deleting route to FEX
11/22/2011 07:52:57.155607: Module disconnected
11/22/2011 07:52:57.156970: Offlining Module
11/22/2011 07:52:57.189131: Deleting route to FEX
11/22/2011 07:52:57.193969: Module disconnected
11/22/2011 07:52:57.195342: Offlining Module
11/22/2011 07:52:57.234153: Deleting route to FEX
11/22/2011 07:52:57.239023: Module disconnected
11/22/2011 07:52:57.240432: Offlining Module
11/22/2011 07:54:40.815191: Module register received
ADM_128-SVF-NS102(config-fex)# sh fex 101 detail
FEX: 101 Description: ADM/128-SVF-NS304   state: Offline
FEX version: 4.2(1)N1(1) [Switch version: 5.0(3)N2(1)]
FEX Interim version: 4.2(1)N1(0.002)
Switch Interim version: 5.0(3)N2(1)
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static    Max-links: 1
Fabric port for control traffic:
Fabric interface state:
    Po4 - Interface Down. State: Configured
    Eth1/11 - Interface Down. State: Configured
    Eth1/12 - Interface Down. State: Configured
    Eth1/13 - Interface Down. State: Configured
    Eth1/14 - Interface Down. State: Configured
Fex Port        State Fabric Port
Logs:
11/22/2011 07:49:46.163035: Module disconnected
11/22/2011 07:49:46.164468: Offlining Module
11/22/2011 07:49:46.213737: Deleting route to FEX
11/22/2011 07:49:46.219043: Module disconnected
11/22/2011 07:49:46.220454: Offlining Module
11/22/2011 07:49:46.250091: Deleting route to FEX
11/22/2011 07:49:46.255026: Module disconnected
11/22/2011 07:49:46.256417: Offlining Module
11/22/2011 07:51:09.395617: Module register received
11/22/2011 07:51:09.396381: Image Version Mismatch
11/22/2011 07:51:09.396511: Registration response sent
11/22/2011 07:51:09.396756: Requesting satellite to download image
11/22/2011 07:55:08.409032: Image preload failed.
11/22/2011 07:55:09.671589: Deleting route to FEX
11/22/2011 07:55:09.682174: Module disconnected
11/22/2011 07:55:09.683181: Module Offline
11/22/2011 07:55:09.702525: Deleting route to FEX
11/22/2011 07:55:09.710557: Module disconnected
11/22/2011 07:55:09.711930: Offlining Module
11/22/2011 07:55:09.741583: Deleting route to FEX
11/22/2011 07:55:09.746544: Module disconnected
11/22/2011 07:55:09.747934: Offlining Module
11/22/2011 07:55:09.786138: Deleting route to FEX
11/22/2011 07:55:09.791026: Module disconnected
11/22/2011 07:55:09.792426: Offlining Module
I am seeing "image mismatch" definitely because our N5K is pre-installed with 5.0(3) while fex is using 4.2(1) pre-installed.
Is upgrading the N2K possible? Hope someone can help
Thanks,
Ramon

Hi All,
Using the N7K to install the Nexus 2000 yielded the same result as connecting to our N5K.
switch(config-if)# sh fex 101 detail
FEX: 101 Description: FEX0101   state: Image Download
FEX version: 4.2(1)N1(1) [Switch version: 5.1(3)]
FEX Interim version: 4.2(1)N1(0.002)
Switch Interim version: 5.1(3)
Module Sw Gen: 21 [Switch Sw Gen: 21]
pinning-mode: static    Max-links: 1
Fabric port for control traffic: Eth1/11
Fabric interface state:
    Po101 - Interface Up. State: Active
    Eth1/9 - Interface Up. State: Active
    Eth1/11 - Interface Up. State: Active
    Eth1/13 - Interface Up. State: Fabric Up
    Eth1/15 - Interface Down. State: Configured
Fex Port        State Fabric Port Primary Fabric
Logs:
11/28/2011 06:27:09.662264: Requesting satellite to download image
11/28/2011 06:29:15.232681: Image preload failed.
11/28/2011 06:29:16.459514: Deleting route to FEX
11/28/2011 06:29:16.464452: Module disconnected
11/28/2011 06:29:16.465542: Module Offline
11/28/2011 06:29:16.502250: Deleting route to FEX
11/28/2011 06:29:16.507315: Module disconnected
11/28/2011 06:29:16.520566: Offlining Module
11/28/2011 06:30:27.820404: Module register received
11/28/2011 06:30:27.821854: Image Version Mismatch
11/28/2011 06:30:27.822322: Registration response sent
11/28/2011 06:30:27.822512: Requesting satellite to download image
11/28/2011 06:33:01.789172: Image preload failed.
11/28/2011 06:33:03.21324: Deleting route to FEX
11/28/2011 06:33:03.26651: Module disconnected
11/28/2011 06:33:03.27635: Module Offline
11/28/2011 06:33:03.60441: Deleting route to FEX
11/28/2011 06:33:03.64871: Module disconnected
11/28/2011 06:33:03.68626: Offlining Module
11/28/2011 06:34:14.640167: Module register received
11/28/2011 06:34:14.640895: Image Version Mismatch
11/28/2011 06:34:14.641367: Registration response sent
11/28/2011 06:34:14.641546: Requesting satellite to download image
11/28/2011 06:37:33.144396: Image preload failed.
11/28/2011 06:37:34.373433: Deleting route to FEX
11/28/2011 06:37:34.378391: Module disconnected
11/28/2011 06:37:34.379795: Module Offline
11/28/2011 06:37:34.429214: Deleting route to FEX
11/28/2011 06:37:34.433627: Module disconnected
11/28/2011 06:37:34.436989: Offlining Module
11/28/2011 06:38:45.746477: Module register received
11/28/2011 06:38:45.747175: Image Version Mismatch
11/28/2011 06:38:45.747841: Registration response sent
11/28/2011 06:38:45.748041: Requesting satellite to download image
11/28/2011 06:41:57.68356: Deleting route to FEX
11/28/2011 06:41:57.80615: Module disconnected
11/28/2011 06:41:57.83824: Module Offline
11/28/2011 06:41:57.98377: Deleting route to FEX
11/28/2011 06:41:57.102731: Module disconnected
11/28/2011 06:41:57.106928: Offlining Module
11/28/2011 06:41:57.151366: Deleting route to FEX
11/28/2011 06:41:57.155672: Module disconnected
11/28/2011 06:41:57.158411: Offlining Module
11/28/2011 06:43:08.457500: Module register received
11/28/2011 06:43:08.458280: Image Version Mismatch
11/28/2011 06:43:08.458874: Registration response sent
11/28/2011 06:43:08.459069: Requesting satellite to download image
11/28/2011 06:47:41.719070: Image preload failed.
11/28/2011 06:47:42.949044: Deleting route to FEX
11/28/2011 06:47:42.954394: Module disconnected
11/28/2011 06:47:42.955658: Module Offline
11/28/2011 06:47:42.973122: Deleting route to FEX
11/28/2011 06:47:42.978185: Module disconnected
11/28/2011 06:47:42.981593: Offlining Module
11/28/2011 06:47:43.26743: Deleting route to FEX
11/28/2011 06:47:43.31820: Module disconnected
11/28/2011 06:47:43.35748: Offlining Module
11/28/2011 06:48:48.755085: Deleting route to FEX
11/28/2011 06:48:48.760546: Module disconnected
11/28/2011 06:48:48.764950: Offlining Module
11/28/2011 06:48:54.260037: Module register received
11/28/2011 06:48:54.260794: Image Version Mismatch
11/28/2011 06:48:54.261268: Registration response sent
11/28/2011 06:48:54.261452: Requesting satellite to download image
switch(config-if)# 2011 Nov 28 06:51:43 switch %FEX-2-NOHMS_ENV_FEX_OFFLINE: FEX-101 Off-line (Serial Number XXXXXXXXXXXX)
It's very frustrating.
Regards,
Ramon

Laptop only runs in safe mode after installing itunes 10.5.2 and no solutions work in safe mode. I'm close to restoring computer to factory settings!!

I'm so frustrated!! None of the solutions work, I've uninstalled itunes, won't let me uninstall bonjour because "i dont have permission" and my laptop will only run in safe mode.
I'm thinking about restoring my laptop to factory setting even if it means losing everything!!

The Apple launch issues article suggests pulling 3rd-party plug-ins if the problem doesn't happen in Safe Mode.
Here's the article that will walk you through the process -> iTunes: Troubleshooting issues with third-party iTunes plug-ins

Pre-installed win 8.1 and new hard disk

Goodevening, I have a G50-30 with win8.1 pre-installed. I didnt recived any disk, no driver disk, no software disk, no windows disk, even no windows product key.
Anyway, I'd like to change my hdd to ssd. So i've started with trying to create a windows-boot-copy using some free software to get the windows product key, in order to use a microsoft tool to create a boot-disk, but the product key i get results invalid, it doesnt' work. Microsoft support suggested me to ask lenovo, about my problem, so does anyone have a suggestion for me?
Matteo

hi Matteo,
Welcome to the Forums.
Can you try the following:
1. Check this guide on how to obtain a Windows 8.1 ISO (see Option One)
2. Follow this guide to make a bootable UEFI Win8.1 installer via DVD/USB flashdrive and use it to install Windows (the installation should be able to detect the Windows 8.1 product key in the UEFI firmware that should automatically activate Windows).
Let me know your findings.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Brand new 2011 macbook pro (preinstalled lion osx) is too slow! Is there anyway to role back to previous OS if it came pre-installed?

I purchased new macbook pro 15" with quad core 2.2 ghz intel i7, 8gb of ram. I swear to god it is slower than my previous 2008 macbook running leopard OS. I use heavy programs pretty often, adobe CS5 and 3D modeling and some rendering on the mac side and and a bit of 3D work with fusion on windows. I was really expecting a performance boost with the new computer, but Lion is annoyingly slow. Even if I am not using any of the heavy stuff and just browsing on the internet, it seems noticeably slower than the 2008 macbook. Typing lags sometimes, genie effect and opening effect lags. The iOS type features are also sluggish. I am about ready to start working again on my old macbook on leopard. I haven't had any issues with the machine completely freezing (though I have had to force quit apps a few times). It is definitely a usable machine, but for the price and newness I expect the performance to be better than the 2008 macbook. From what I have read on the forums, I am blaming the buggy Lion OS for my troubles. I figured the OS might still have some bugs as it was brand new, but this is more than I bargained for.
Does anyone know if it is possible to role back to Snow Leopard? I have heard it can't be done if the computer came pre-installed with Lion OS, but surely some clever people have figured a way...

Thanks for your help, I appreciate it.
I am not using Filevault, and the closest genius bar is 4 hours away, so I am trying to figure out a solution via internet. I will check out the Fusion update, though I expect that to be slow (that is the price you pay for running windows on a mac!)
I am surprised you havent noticed the resume/restore windows, docs, and apps feature (for both subsequent openings of program and reboot of system- new to Lion OS) I use the term feature lightly as they didnt seem to work properly initially, like they had cached older stuff than when I actually quit an app or shut down. After the first couple of times of the computer stalling trying to reopen an application with a heavy document or restarting and trying to open EVERY program I had used the day before, I disabled the features. To disable required a bit of a hack with Terminal.
to disable on restart:
http://osxdaily.com/2011/08/25/disable-reopen-windows-when-logging-back-in-in-ma c-os-x-lion-completely/
to disable resuming applications:
http://osxdaily.com/2011/07/18/disable-mac-os-x-lion-resume-window-restore/
--only that doesn't really work (which if you scroll through the comments below you will see what people post about it) I had to expose the hidden library, delete some stuff there, and run some stuff in terminal to get this feature totally disabled, blah blah blah.
These seem like good ideas, but definitely need some tweaking to work properly. I like the iOS features in Mission Control, but the lagging animations are absolutely unacceptable. Even dragging an icon across starts out jerky and sluggish. I never noticed any issue with the OS animations on the 2008 Macbook running Leopard.
Anyway, there are known compatibility issues with Lion and Adobe Creative Suite. Adobe CS5 products are what I use most often, so I would like to role back to Snow leopard, though it is reported that Apple has made that impossible on the new machines that shipped with Lion.

Error in Pre-install of patch 9239089

we are in Pre-install Tasks of patch 9239089 for windows server 2008.
Executed the envshellPROD_srv-moc environment file then performed the below steps
Usage:
1. Create $ORACLE_HOME/appsutil/admin on the database server.
    copy adgrants_nt.sql (Windows) from this patch directory to
     %ORACLE_HOME%\appsutil\admin.
3. Set the environment to point to ORACLE_HOME on the database server.
4. Use SQL*Plus to run the script:
     Windows:
     C:\> sqlplus /nolog
     SQL> @%ORACLE_HOME%\appsutil\admin\adgrants_nt.sql <APPS schema name>But go the error
SQL> @F:\oracle\PROD\db\tech_st\11.1.0\appsutil\admin\adgrants_nt.sql apps
ERROR:
ORA-01031: insufficient privilegesWhat need to be done to solved the error.
Thanks
Nawneet
Edited by: user13767670 on Jan 24, 2011 11:31 AM

Hi
I check the below link and it mentioned that by
"I removed the connect as sysdba line form the script and it worked.."
adgrants.sql issue
i added the full path
connect sys/manager@prod as sysdba
instead of
connect / as sysdbaand when i ran it it executed ,
E:\oracle\PROD\inst\apps\PROD_srv-moc\admin\scripts>sqlplus /nolog
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Jan 24 13:02:25 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> @F:\oracle\PROD\db\tech_st\11.1.0\appsutil\admin\adgrants_nt.sql apps
Connected.
--- adgrants_nt.sql started at 2011-01-24 13:02:35 ---
Creating PL/SQL profiler objects.
--- profload.sql started at 2011-01-24 13:02:35 ---
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Pr
oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
E:\oracle\PROD\inst\apps\PROD_srv-moc\admin\scripts>Can you tell me if that executed successfully , above is the output
Thanks
Nawneet

Install SAP Solution Manager with DEV instance in the same server (MCOD)

Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine.
I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. But when i am installing the SolMan through the sapinst i don´t see the option MCOD
The only option i am confussed is
MS SQL Server
Database reuse o - New Database (DBSID = SAPSID)
o - Use Existing Database
Database ID (DBSID)
Witch option should i choose to perform a MCOD installation? new db or use existing db (DEV)?
Kind Regards

Hi Merchan, if you want to use MCOD you need to select the option: o - Use Existing Database
Database ID (DBSID) .
Regards,
Darwin C.

Windows 8.1 pre-installed , your windows license will expire soon?!?!

I just updated my Windows today when they prompted and asked me to update it and restart the laptop. After updating and restarting, the laptop suddenly notifies me that my windows license will expire soon and I will need to activate it in the pcsettings.
It then brings me to a page with two choices, activate windows online or enter new product key. I tried both options but the first one won't work and the second one requires a product key which I have no idea what it is. When I look at my system information, it says that my windows 8.1 is activated.
By the way, my windows 8 is pre-installed on the laptop. Please help, I am a complete newbie in the technology field!
This question was solved.
View Solution.

Hi,
Try the following.
Hold down the ctrl and alt keys and press delete.
Select Task Manager.
In the bottom left select More Details ( if it's not already selected ).
Click in the Name column header to arrange the processes in alphabetical order.
Find the process Windows Explorer, then right click on it and select Restart.
When the process has restarted, close Task Manager, then right click the Start Menu icon, select Command Prompt (Admin) and click ‘Yes’ to the uac prompt.
Enter the following command and hit enter ( Note that there is a space between slmgr and -rearm )
slmgr -rearm
Restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

N78 Pre-Install Dictionary Solution (work database...

Similar Messages

Maybe you are looking for