N78 Restarts when trying to connect to a wifi netw...

Hello,
I upgrade my N78 firmware recently and now when it tries to log in to a web protected wifi network the phone just hangs and restarts right away.
Is there anything that I can do? I haven't test it with other wifi networks but I will soon...

System Preferences, Universal Access, Seeing, VoiceOver.

Similar Messages

Authentication error when trying to connect to home WiFi

My Galaxy 3 won't connect to my home wireless. I've entered the correct SSID and authentication method, I've removed the connection and re-established it, I've rebooted the phone, etc. I do not have this problem accessing WiFi anywhere else. If it matters, the home service is Comcast--and it's the exact same modem & general service as my daughter has, and I have no problems accessing her WiFi.
This question or similar has been asked before, but it looks like no one has been able to answer it so far. I'm hoping that a new discussion might find someone out there who has figured this problem out and fixed it.
Thanks,
Suzanne

I am having the same exact problem. Up until a week ago my Galaxy3 phone automatically connected to my home network whenever I was in my house. All of a sudden, my phone powered off and when it came back up I no longer can connect to my home network. It will work with any other network outside of my house. I tried all the same things that you did including powering off my modem etc. My home computer and tablet are all fine. My husbands Droid X phone still works. Everything can connect to my home modem except my Samsung Galaxy3 phone.
I don't know what happened buy every time the phone tries to connect to my home modem, it gets an authentication error message. When I look at the settings, it looks like the IP address is missing. The phone won't let me "forget" or remove the address. I have tried countless times. I also can't add the IP address manually...there is no way to do this. I would appreciate Anyone helping. It's very frustrating. Did you ever get an answer?
LMK..thanks
roberta

I get "wrong password" error when trying to connect to a Wifi network.

Only workarround is to reset network settings before changing to any wifi network. This is a pain. Please help!

It's any network. If I reset network settings, I can connect at home, but I get the "wrong password" but not at work. Then, if I reset it again, I can conect at work, but not at home.
Only way to switch Wifi network is through a "reset network settings" operation.
On my wive's iPhone 5 this problem does not exist. She can commute seemlessly among WIFI networks.

My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

Error message when trying to connect Classic 120GB to iTunes An internal error occurred during: "FindSonarTrackJob". java.lang.NullPointerException

When trying to connect to iTunes I get this message
An internal error occurred during: "FindSonarTrackJob".
java.lang.NullPointerException

I too am having this problem and have had, for about a week now.
I've found that by logging off itunes (if I can), closing it down, and then restarting it, sometimes allows it to work for one transaction (say downloading an updated app). After that it's back to the same error.
Really annoying.

Blue screen when trying to connect ipod

When trying to connect my ipod to my computer it reboots it into a blue screen that looks something like this...
STOP: 000000007F (0000000008, 0X80154000 etc, etc.)
minidump something something.
I looked in my minidump folder but there was nothing in it. Any suggestions?

Okay.
Let's see if we can get a minidump generated for the crash.
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
With those settings in place, does a minidump file get generated for the crash?

Why do I keep getting a connection error when trying to connect to SQL?

Environment:
LiveCycle ES2
Windows Server 2008
JBOSS
Oracle Application DB
When trying to connect to SQL, I get this error message in the log.
Exception: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.); - nested throwable: (org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (java.lang.UnsupportedOperationException: Java Runtime Environment (JRE) version 1.6 is not supported by this driver. Use the sqljdbc4.jar class library, which provides support for JDBC 4.0.))
I have these two files located in \\jboss\server\lc_oracle_cl\lib
sqljdbc.jar
sqljdbc4.jar
I was told all I needed to do was drop these two files in the directory above and restart JBOSS. Is there something I'm missing?
Jesse

Hi Jesse,
The driver you are using is for SQLServer Database. Since you are using Oracle as your database, you need an oracle driver.Please copy ojdbc6.jar from the [installDir]/lib/db/oracle/ directory and try again.
Thanks,
Ruchi

Error message when trying to connect to iCloud?

Hi. When trying to connect to my contacts/calendar in the Cloud I get the following error message:
"Can't load contacts. There was a problem loading the application". I am not sure what to do. Any suggestions would be
greatly appreciated. thank you in advance.

Welcome to the Apple Community.
Try the following.
Go to Settings > iCloud > Delete Account (This removes your data from your device, but not from your account, it will be added back later).
Restart the device.
Sign in again (Settings > iCloud, don't use the 'Create New Apple ID' button).

Finder crashes when trying to connect to network share

Hi!
I've just upgraded my Mid 2012 MacBook Pro to Mavericks, and found that Finder always crashes when trying to connect to my office network share via an IPSec VPN connection. It's a Synology DiskStation NAS, so i have the options to connect via AFP or SMB, however both result in the same, the crashing of finder. Even after i relaunch it, i can't open finder, and can't even shut down or restart my system (only by holding the power button for 5 secs...)
At first i thought it's the result of the latest Little Snitch version, but the problem remained after completely removing Little Snitch.
Unfortunalely i won't be able to try connecting to the NAS on the local network until monday, but i'd really appreciate if someone could point me to the direction of some solution as this way i can't do any of my work.

Just a quick heads up. I finally managed to resolve the issue. It seems that mavericks doesn't handle the MTU of the vpn connection correctly, so i ended up modifying the MTU on the VPN gateway.

I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone. What the...?

I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone. What the...?

Hi Boscoboi,
Welcome to the Support Communities!
You may need to check the settings for your iTunes Store on the iPad and iPhone.
Sign out of the iTunes account, restart the device and sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If these basic steps don't resolve your issue, then follow the advice in this article for connectivity issues with iTunes:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
- Judy

Page/JNI: Exception when trying to connect in 1,page/ContentFetcher InterruptedIOExce

We have upgraded to fro m 3.0.8 portal 3.0.9.8.2 9iAS 1.0.2.2 on database 8.1.7
the system is very fast and run for sometime but after a while we see the following errors in Jserv.log file.
this error causes the whole system to hang and we have to restart apache/jserv.
Any light on this issue will be helpful and very much appreciated.
thanks,
Sunil Bontha
25/07/2001 14:07:51:388 CEST] Viewer/oracle.discoiv.Disco4iv: init
[25/07/2001 14:07:51:388 CEST] Viewer/oracle.discoiv.Disco4iv: Initializing Discoverer 4i Viewer (4.1.37.82)
[25/07/2001 14:09:15:219 CEST] page/oracle.webdb.page.ParallelServlet: init
[25/07/2001 14:09:15:249 CEST] page/JNI: Cache is enabled.
[25/07/2001 14:09:15:299 CEST] page/Starting a pool of 25 handlers.
[25/07/2001 14:09:43:820 CEST] page/JNI: Exception when trying to connect in 1.
[25/07/2001 14:09:43:830 CEST] page/Timeout occurred, label=145 url=http://www.myserver.com/pls/pmsportal30/!PMSPORTAL30.wwpro_app_provider.execute_portlet [25/07/2001 14:09:43:830 CEST] page/ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher23
[25/07/2001 14:09:43:840 CEST] page/JNI: Exception when trying to connect in 1.
[25/07/2001 14:09:43:840 CEST] page/Timeout occurred, label=293 url=http://www.myserver.com/pls/pmsportal30/!PMSPORTAL30.wwpro_app_provider.execute_portlet [25/07/2001 14:09:43:840 CEST] page/ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher22
[25/07/2001 14:09:53:864 CEST] page/JNI: Exception when trying to connect in 1.

Hi Avi,
My application is a standalone application trying to access MBeans present in oc4j.
I tried
using the code
props.put(Context.INITIAL_CONTEXT_FACTORY ,"oracle.j2ee.rmi.RMIInitialContextFactory");
obj = (ManagementHome) ctx.lookup("ejb/mgmt/MEJB");
but i am getting the following error.
javax.naming.NameNotFoundException: ejb/mgmt/MEJB not found
at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java
:45)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at TestMBean.doSomething(TestMBean.java:90)
at TestMBean.main(TestMBean.java:237)
java.lang.NullPointerException
at TestMBean.doSomething(TestMBean.java:107)
at TestMBean.main(TestMBean.java:237)
Regards
Siva

Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

Hi All,
I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
Here is my server.xml
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<GlobalNamingResources>
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<Resource auth="Container" description="Users and Groups
Database" name="UserDatabase"
scope="Shareable"
type="org.apache.catalina.UserDatabase"/>
<Resource name="jdbc/DefaultDS" scope="Shareable"
type="javax.sql.DataSource"/>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.
MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<ResourceParams name="jdbc/DefaultDS">
<parameter>
<name>validationQuery</name>
<value></value>
</parameter>
<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>4</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>2</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>

<Service name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/DefaultDS">

<parameter>
<name>maxActive</name>
<value>8</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>4</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>

<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>

<parameter>
<name>description</name>
<value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Host>
</Engine>
</Service>
</Server>
and my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">

<web-app>
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
Connection con = ds.getConnection();
return con;
I tried connecting as mentioned in this website
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
Please help urgent
Sorry for long file. Can any one please help me in solving this problem.
Thanks in advnace
Kurakula

I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
MOD

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

Error message WMC604 in VZAM when trying to connect to 4G using Novatel USB551L.

VZAM recognizes the modem, and attempts to connect to 4G. After about 10 seconds, a message appears,"Error WMC604, Device could not establish a connection". (I have no problem connecting to 3G, just 4G)
One clue: If I have "Control Panel>Network Connections>Novotel 551L open when I try to connect, I can watch (if I am connecting to 3G) the modem aquire an IP address and connect. If I am connecting to 4G, there is no such activity shown on Control Panel>Network Connections>Novatel 551L modem. It just does nothing until the error message appears in VZAM. It's as if VZAM is not communicating with the modem although during this time VZAM displays a message "connecting".
I have created a dial-up connection in Windows 7 according to the Verizon knowledge base article ID=29355 just so I could use 4G, and the modem connects and works just fine. I just wish I get it to connect to 4G using VZAM.
I am using VZAM version v7.6.3.1(2642f) and one of the things that VZ tech support suggested was replace the SIM card, but that didn't make any difference. I am using Dell XPS 8300 desktop running Win 7 Home Premium,SP1 currently, although problem is the same on my Dell 5160 laptop running Win XP, SP3.
Hoping someone here on this board can help. I have spent hours on the phone with Verizon tech support and they say they have never heard of this error, and have no clue how to make it go away. In checking Google, I see that it is in fact a fairly common error in VZAM, but no one seems to know how to fix it......Verizon reps on the board feel free to come to my rescue?
HELP!!!!

AdamE_VZW
Thank you for your reply. I checked Device Manager for conflicts and see none. I opened VZAM and Device Manager>Novatel Modem side-by-side on the screen and attemped to connect to 4G using VZAM while watching Device Manager for conflicts. There were none indicated when the WMC604 error appeared in VZAM. According to Device Manager, my Novatel modem driver is version 1.1.12.0 ; dated 12/8/10. The "update driver" button is grayed out so I don't know how to check for a newer version. This version is the one that came on the VZAM install CD I belive.
Some background about this problem: When I first got this modem and installed the software, it worked as it should. It came up in Global mode and connected to a weak 4G signal that was comming from the Portland OR airport. Because the signal was weak and un-reliable, the modem would constantly shift back to 3G, and then every few minutes back to 4G, over and over. I got tired of putting up with the constant hunting, and, using the diagnostic screen, locked it into EVDO mode until 4G went live in Portland OR in the middle of June. During the time it was in EVDO (3G) mode, I had no problem connecting to 3G using VZAM. When Portland went live, I locked it back to LTE mode, and that was when I discovered the error WMC604 message. This was using my previous computer, a Dell Dimension 4500 desktop, Win XP,SP3, and an external Wilson log-periodic tri-band antenna. Since Portland went live, my current RSSI for 4G runs around -68db, and SINR varies between -9 to -12 db.
I recently got my present computer, a Dell XPS-8300 desktop, Core i7, Win 7 Home Premium, SP1. I did a fresh install of VZAM on this new computer using the CD that came with the USB551L modem and then checked online (using 3G) for VZAM updates. It says I have the latest version. The problem is exactly the same on the new computer as it was on my other 2 computers. That tells me that the problem must lie with the modem firmware or hardware, because the problem follows the modem, no matter what computer it is hooked up to. I even took it back to the Verizon store where I got it and they hooked it up to one of their computers and got the same error message when trying to connect to 4G. 3G worked properly
As I mentioned before, the modem instantly connects to 4G using the Win 7 dial-up connection I created and gives pretty good speeds, about 10MB down and 4-5MB up, according to SpeedCheck.com.
I can use it the way it is, it is just frustrating that it won't work using VZAM.
Thank you for your attention and help,
Inst_Tech

Getting error 789 when trying to connect with a PC remotely via VPN

When we set up the VPN we are getting a Error 789 when trying to connect with a PC. Any suggestions would be appreciated.

The utilities, provided on the CD, are not required for the PC to access the Internet through the 802.11n AirPort Extreme Base Station (AEBSn). They are only necessary for administering the base station.
If your PC is currently configured as a DHCP client, it shouldn't have any issues connecting by Ethernet. The AEBSn will assign the appropriate IP addresses required for connectivity to the Internet ... just like it does for wireless clients.

N78 Restarts when trying to connect to a wifi netw...

Similar Messages

Maybe you are looking for