N78 tim stuck with 12.046

As i connect to update the phone it showes me 12.046, is latest firmware for my mobile product code. It is n78 TIM brand with code 0566811. Any ideas

When a phone has a network's customised version of the software, that network must approve thupdates before Nokia can release them.
In any case, you have the same version that most generic N78s have - I have not heard of a version greater than 12 for the latest N-series models.

Similar Messages

I was copying files to my time capsule when it crashed when it was almost finished. Now I am stuck with a light grey folder I can not delete. I would´t care if it wasn´t for the fact the folder is 1 TB size and takes up too much space. I ha

I was copying files to my time capsule when it crashed when it was almost finished. Now I am stuck with a light grey folder I can not delete. I would´t care if it wasn´t for the fact the folder is 1 TB size and takes up too much space. I have tried turning on and of Hiding Files in Finder and what not with no success. So, how do I delete this folder. Remember, I am not extremely familiar with technical terms.

I recommend you erase the TC.. it is the easiest and fastest solution.
In Airport utility open the disk tab and select erase.. choose quick erase.. it will take less than 1min.
Start again but copy files in small amounts.

HT1933 Tried iTunes Store directive for reporting a problem. Got an ERROR message every time. Stuck with a NY Times app that won't recognize my subscription.

Tried iTunes Store directive for reporting a problem. Got an ERROR message every time. Stuck with a NY Times app that won't recognize my subscription.called Apple and was told by an automated message to...use the ITunes Store directive.
Can someone point me in the right direction.

Hello atransient,
Thanks for the question, that definitely sounds frustrating to encounter errors at the most important times.
Let's see if the online Report a Problem works any better for you:
http://reportaproblem.apple.com
Thanks,
Matt M.

I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for comparability and the Welcome page opening every time I start the browser.

Windows 7 64 bit
I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for compatability and the Welcome page opening every time I start the browser. I continue to have to revert to version 9 to resolve this issue.

Sorry to be a while getting back! Tried all of that with no sucess so this AM, bit the bullet and deleted the FF folder from programs and downloaded and installed FF 10.01. Still was plagued with the same problem. Went into the appdata folder and there were two sessionstore.js files. Deleted them both, restarted the browser and no compatibility check for add-ons was done at start up and the extra tab for Welcome to FF was no longer opening Everything seems to be working as it should and I did not loose any of my settings.. Thank you for trying to help and I hope my solution helps anyone else who might experience this in the future. Here's hoping the next update goes smoother!

I replaced my hard drive and am installing the OS 10.5.6 that i got from Apple. It is stuck with 7 minutes remaining. Help! this is the first time I've ever done this.

I just replaced my hard drive in my 13" Macbook. I got the OS install disk from Apple but it's stuck with 7 minutes remaining. What do I do now? I let it check the disk before the install.

Did you properly prep your new drive first?
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.
I think you should shutdown the installer then erase the drive per the above and start again.

App will not download to iPad when purchased from App Store - stuck with Cloud icon

Device : iPad Air 32gb wi-fi model (not cellular data)
OS version : 7.1.1 (up to date)
Location : UK
Problem : App will not download to iPad when purchased from App Store - stuck with Cloud icon
Last night I tried to download an app over wi-fi onto my iPad Air, but the app did not install.
I have plenty of space (the app is 24.1mb, I have 3.4gb free space) and there are no restrictions whatsoever on my iPad - no blocks on App store purchases, no age-related restrictions, no country restrictions etc.
Normally from the App Store page you would tap the price (in this case the app was free), enter your iTunes password, and the app would download.
Also a new icon appears on the home screen and a circle shows the progress of the download.
However this did not happen.
Instead I have the Cloud icon (the one that shows when you have bought an app but it is not currently installed on your device) and a message that says "You've already purchased this, so it will be downloaded now at no additional cost".
If I press OK I am then prompted to enter my iTunes password, the Cloud symbol briefly changes to a circle (and I mean for a split-second, like the blink of an eye) and then the Cloud symbol appears again.
The app does not download - in fact it does not even *attempt* to download.
I have tried this >20 times now and it always occurs excatly like this.
After Googling this problem (which seems common) and reading over a dozen threads on this forum plus Apple's own official support pages, this is what I've tried:
I can re-download other apps that I have previously purchased on this iPad, with no problems.
I purchased another app on my iPhone 5 and was then able to download onto my iPad with no problems.
I have reset my iPad >5 times - both by pressing/holding the home/power buttons, and also a full switch off and restart.
I have logged out of my iTunes account on the iPad, and logged back in.
The wi-fi is Virgin Media fibre optic broadband with a verified speed of 20 meg (confirmed by Speedtest) plus an 802.11-n Belkin router and my iPad will happily load web pages, stream videos on YouTube, download other apps etc.
I have reset/rebooted my internet connection
In an attempt to eliminate by broadband connection from the possible causes, I have switched off my router, linked my iPad to the hotspot feature on my iPhone and tried to download the app over cellular data, but still cannot download the app.
I have tried on 2 other wi-fi networks but still cannot download this one app.
My iTunes account has a cerdit balance from an iTunes card, but the app was free anyway
Nothing I try will download the app in question.
The app is iPad only, so I cannot install on my iPhone to try and kick-start the process.
I guess I could install the app on my computer and then sync the iPad, but that's *working around* the problem - it's not *fixing* the problem.
(Since getting the iPad I use almost never use my computer. And anyway what if I did not have a computer? Didn't iOS go "PC-free" with version 5?)
I would like to call Apple but my 90-day telephone support has expired (the iPad is around 6 months old) and I don't want to buy Apple Care for this one problem.
I can't make it to an Apple Store to speak to a Genius.
Bearing in mind the list of things I've already tried, what do I do next?
Thanks in advance for any support.

Hi there.
Thank you very much for your quick reply, it's really appreciated.
No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
I guess I need to fire up my PC and download it / sync my iPad.
Thanks again for your help

My Mac Book Pro suddenly gets stuck with weird horizontal colored lines across the screen, which will only go once I restart the laptop. What can I do?

Randomly while scrolling, the screen just goes beserk and gets stuck with random colored lines. And, the only way to get rid of this is to restart my entire computer. My laptop is about 3 years old now. Is this a sign of age or what? What can I do to run my laptop smoothly without turning it off and on every time it goes crazy?

Try resetting PRAM and SMC.
Reset PRAM. http://support.apple.com/kb/PH4405 x
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

ASR Hyper-v (VMM) to Azure and we are stuck with this error while preparing the VMM Server

We are stuck with this error while installing ASR provider and registering with Azure Vault, can i get some help on this
Error:
NO Vaults could be retried for the registration key. Please ensure that
1, your registration key has not expired.You can re-downloading registration key from Azure site Recovery portal
2, Your system clock is not out of sync with the selected system time zone
System Clock is set to IST and Azure to southeastasia

Hi,
Could you please ensure that you have downloaded the latest registration key from the portal?
Also ensure that the machine from where you are accessing the portal and the VMM server has the right time according to your time zone.
Thank you,
Ruturaj

HT201210 I am stuck with "The iPad could not be restored because the firmware file was corrupt" message.

Hi
I have an iPad mini and it was on iOS 6.1.3, my friend came and he said that he knows how to install iOS 7 for me. I gave it to him and he tried to install it, but apparently he failed to do so and an "Activation Error" is appearing on the screen now asking me to register in the developers program.
Now, we are trying to restore it back to iOS 6.1.3 using iTunes, the software downloads well and it starts restoring but that I keep getting this error message "The iPad could not be restored because the firmware file was corrupt.".
I am sure that the file is not corrupted because it's downloaded via iTunes regular download and it's not from an outside source.
I am stuck with this now and my iPad is useless this way.
Please any suggestions ?

basselsamo wrote:
Please any suggestions ?
Yes, don't download Beta Software that you have no business or legal right to download and quit taking bad advice from friends.
Now to maybe get you out of the restoring jam, the only thing that I can think of that might work is to use recovery mode, unless you already tried it and it didn't work.
You can read about it here, but the instructions are posted below.
http://support.apple.com/kb/ht4097
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

How do I access compacted mail on a Mac version 10.5.8 stuck with Thunderbird version 16.0.2 ? I am unable to access needed documentation for Taxes, etc

How do I access compacted mail on a Mac version 10.5.8 stuck with Thunderbird version 16.0.2 ? I am unable to access needed documentation for Taxes, etc

Where in the world did you read Deleting All My Mail? I have reread my answer several times and cannot seem to find that in there.
When you mark a message for deletion it does just that. It marks it for deletion and hides the message. It is not truly deleted until you compact.
My point is that unless you deleted your important mail they should still be there somewhere.
Your question was about compacting and thinking it put your messages in a nice little box for safe keeping and now you want to open it.
I have to agree that Thunderbird did a horrible job of naming this process because most are like you and do not understand what it actually does. I included the link to the explanation of what compacting means in the Thunderbird world.
Your messages may still be available to your but finding them has nothing to do with compacting.
Thunderbird does not archive anything unless you use that process by selecting the message and pressing a. You have the option to setup where you want that archive to go and what folders to make.
The All Mail folder is a goofy gmail arrangement. If you have problems with that then you need to address that with Google.
If you go into your gmail account on the gmail site do you see the messages you are hunting in the All Mail folder there?

Yosemite will not upload on my MacPro, says I have to verify or repair, but when I do - it fails on that too. Am now stuck with a computer that doesn't work ! Have I lost everything ?

Yosemite will not upload on my MacPro, says I have to verify or repair, but when I do - it fails on that too. Am now stuck with a computer that doesn't work ! Have I lost everything ?

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Stuck with my phone :(

Hell started once I joined Verizon. Joined my sister plan to bundle up and supposed to save money. Went to the store and left happy thinking we got a great service. My sister gave me her Iphone 4 and she upgraded to the Iphone 5 and that was that everything was supposed to be dandy carried over with insurance plan and everything. Load and behold out first bill comes, notice it was about 20$ more than the verizon guy said it was going to be. We later figured out that he explain the prices a bit off but that fine he did a little mistake, we try to call customer service and tell them nothing they said he was right but said and wrote down wrong info. They did nothing so we lived with it, thinking oh well that 240 dollar we wont be able to get back. Then another hit to the face, they never carried over my sister insurance to the new line. So now I just stuck with a cracked phone and sadness from a company full of lies. They wouldn't ever offer the new contract deal for the new phone I need, contract was start less that 4months ago. I will most likely just cancel the line and take the 200 dollar hit and go back to t mobile, will end up being the same price as buying a new one from Verizon. Just had to vent.

Why would they give you a new contract when you are only four months into your first one? Imagine if they did allow this, and let you tack an additional two years on your existing contract. You would now be bound to a 40 month contract with the device you picked. Then add another two years when that phone breaks...you could be in contract with Verizon for a LONG time if this was allowed. It doesn't make sense, so Verizon simply doesn't offer it. It sounds like your sister took advantage of you, adding a line so she could upgrade early, leaving you with an old phone and no options. I would suggest finding out when her upgrade is and use that when you can, and In the meantime, buy a used phone if yours is no longer functioning correctly.

Stuck with a bad font in Safari

Safari used to have an option in an appearance setting to select a default font for webpages, and back in high school, I made it something dumb and illegible. It's still set to that same font through transferring my data from one computer to the next, but now the option to change it back is gone. I can't install an older version of Safari to change it, am I stuck with it? My MacBook Pro is completely up to date with all upgrades.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Stuck with iPhoto 8 on Lion!

I took my one year old iMac which is originally running Snow Leopard and I ran a clean install on it, meaning I lost my iLife package. Before I noticed that I downloaded Lion from app store and installed it. When I booted up I noticed no iLife software was installed so I took my applications install DVD and installed all the missing software (snow leopard edition) and now I am stuck with that. Had I installed iLife before upgrading to Lion I would have gotten iPhoto 9 and iCloud support. How can solve this problem without reverting to Snow Leopard??

As Terence has pointed out if you want iPhoto 9 (11) you will need to purchase it. You can either get it from the App Store (individual purchase of iPhoto) or purchase the iLife 11 disk from the online Apple Store which will include the now discontinued iDVD and iWeb applications: iLife 11.
If you intend to use iWeb or iDVD at any time I suggest you purchase the iLife 11 disk while there are still in stock.
OT

Stuck with a "lookup up" question

hello forum,
is there a function to search a column for a particular string, e.g. "*pic1*" (wildcards needed) and if there is a match than just return "pic1"? Somehow it sounds very simple - but right now I´m stuck with it. I tried "lookup" but could not get it to work that way.
Regards, Michael

Hi Michael,
I think you could build a formula to do what you are describing starting with COUNTIF(). It can count how many times "*pic1*" shows up in a column and return that number. You could then test that value and return "pic1" (or whatever) if a number value is not enough.
You could also use conditional highlighting on those cells to highlight the cells containing "pic1".
Wayne's request is a good one. You have an idea of how you want to solve a problem but it may not be the simplest or most direct way. As an example, many people come to the forum with a question about IF() and end up using LOOKUP().
What is the problem you are trying to address?
quinn

N78 tim stuck with 12.046

Similar Messages

Maybe you are looking for